Used Oxford Xb220A-I for sale (53,187)

Condition: used, This listing is for a Oxford XB220A-i Balance. The unit is in full working condition and is ready for immediate release. Features -High Precision Technology -Easy Operation draft Shield -Maximum User Friendliness -Large Vacuum Fluorescent Display Isdpfxoxx At Uo Ahysih -Die-cast Aluminum Housing -lP65 protection available against ingress of dust and water available Capacity: 220g

Condition: used, Oxford Instruments Iisdpfx Ajzd Ru Dohyoh Type: INCAx-act + 2 x-stream mics + PC and software INCAx-act Analytical Drift Detector Microanalysis of elements, including boron and above Operating temperature Normal mode: 10-25 degrees Operating temperature Extended mode: 10-30 degrees Storage temperature -25 to 40 degrees and 8 to 80% relative humidity, non-condensing Operating humidity

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Iisdpoxz Divefx Ahyoh

Condition: excellent (used), Year of construction: 2022, operating hours: 6,500 h, functionality: fully functional, overall weight: 4,710 kg, A wide range of accessories is included. Iisdoz I Rigspfx Ahyeh

Condition: used, Oxford Instruments   Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – for spare parts / defective   Item Description:   For sale is a used X-ray Fluorescence Analyzer, type Oxford Instruments X-Strata 960. The unit comes from a laboratory decommissioning and is offered exclusively as a source of spare parts or for repair purposes. No functional testing has been performed – therefore, the unit is considered defective for the purposes of this sale.   Technical Data – Oxford Instruments X-Strata 960 (non-binding)   Feature Description Model X-Strata 960 Manufacturer Oxford Instruments Analysis Method X-ray Fluorescence Analysis (XRF) Application Areas Coating thickness measurement, material analysis, precious metal testing Measurement Geometry Top- or bottom-irradiating, depending on configuration Radiation Source X-ray tube (e.g., rhodium anode), 50–100 W power Detector Proportional counter or silicon drift detector (SDD), depending on version Measurement Range Coating thickness approx. 0.005 – 50 µm (material dependent) Spot Size approx. 15 μm – 1 mm (depending on collimator) Z-Axis Motorized, adjustable up to approx. 230 mm measurement height Sample Chamber (W × D × H) approx. 580 × 510 × 230 mm Sample Table Manual or motorized (200 × 200 mm or larger, depending on equipment) Focusing System Optical / laser focus, partially automatic Operating System Integrated industrial PC with Windows-based evaluation software Voltage Supply 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight approx. 150–200 kg (depending on version)   Condition: used / defective / for spare parts   Iodszdzifjpfx Ahyeih Scope of Delivery: as shown in the images – without accessories or software   Important Notes:   Sold expressly as a defective unit without any warranty of functionality. The item is offered as a source of spare parts or for hobbyists. No warranty on function, completeness or technical parameters.   Commercial sale with exclusion of any liability for defects, in accordance with § 447 BGB (distance selling contract).   Scope of Delivery:   Oxford Instruments X-Strata 960 All components visible in the images Other parts, accessories or documentation are not included, unless explicitly stated.   Shipping & Pickup:   Pickup possible and preferred in Borken Shipping possible upon agreement.   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2022, operating hours: 798 h, functionality: fully functional, machine/vehicle number: S102221332GKBCP, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 28 m/min, feed rate Y-axis: 28 m/min, feed rate Z-axis: 28 m/min, torque: 74 Nm, total height: 2,564 mm, total length: 3,264 mm, total width: 2,930 mm, overall weight: 2,850 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 98 h, spindle nose: SK 40, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HURCO VM10i A vertical machining center in compact format, in almost new condition. !!! 98 operating hours of the spindle !!! Work area Iodpfx Ahsz Ei Ameyjih Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniformly distributed) (kg) 1500 Travel X-axis (mm) 660 Y-axis (mm) 406 Z-axis (mm) 508 Feed rate Rapid traverse X-axis / Y-axis / Z-axis 28 / 28 / 28 Main spindle Spindle taper (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Tool changer Magazine slots 24 Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Includes coolant tank (62 liters) and chip conveyor, as well as extensive accessories (machine vises, chucks, software for processing DXF files). An inspection is possible at any time. The Hurco is currently still connected and can be tested.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. Iijdpfxszyrpnj Ahyoh The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: used, Year of construction: 2023, functionality: fully functional, We are selling a bandsaw, Berg & Schmid GBS 242 DG HA-I, with a cutting speed of 25-90 m/min. The following equipment is included with the purchase: - Micro-spray system SET GBS 242, including spray nozzle, fluid reservoir, and 24V Plus mounting bracket. - Infeed roller conveyor, left side. - Infeed/outfeed adapter for URB 290/400, connection piece for the machine. - URB 290 universal roller conveyor, length 4000 mm. - Roller conveyor extension for miter angles up to 45°, extending to the left (infeed). - Outfeed roller conveyor, right side. Ijdjz Dnq Hopfx Ahyeih - Infeed/outfeed adapter for URB 290/400, connection piece for the machine. - URB 290 universal roller conveyor, length 4000 mm. - Roller conveyor extension for miter angles up to 60°, extending to the right (infeed). - LM 55 DH/manual digital length stop, measuring length 4000 mm, including connection to the saw.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 250660, overall weight: 4,500 kg, grinding spindle motor power: 28 W, year of last overhaul: 2026, Our machine has been meticulously maintained and has undergone regular servicing. The spindle was recently replaced, and it now operates flawlessly. Ijdpfxez Nad As Ahyoih

Condition: excellent (used), Year of construction: 2007, operating hours: 6,000 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, • X-axis: 540 mm • Y-axis: 540 mm • Z-axis: 560 mm Table: 700 x 520 mm Tool changer Control system: Siemens Sinumerik 810D 24-position tool changer Mount: SK40 Isdpsz Rxhdjfx Ahyeih Chip conveyor Coolant system Without mounts Loading possible Delivery possible upon agreement

Condition: used, Year of construction: 2016, Bizerba GLM-I evo 1T1B Year of manufacture: 2016 Length of weighing belt: 700 mm Weighing range: 6 kg Weighing data: Max: 6 kg Min: 40 g Iiodpfx Asz Nmmrehyeh Verification interval (e): 2 g Weighing and labeling of products with a length of up to 700 mm possible!!! Transport direction: Right → Left Labeling system Top labeling: Using air blast (AirJet) The labeling system can be adapted or converted to meet the individual requirements of the customer. Bottom labeling: Using a belt labeler Technical equipment Color touchscreen terminal GT-12C Belt width: 300 mm Standard thermal printer for labels with a width of up to 160 mm Electric height and position adjustment of the labeler over the entire adjustment range (up/down and front/back) Software versions System version: 13.60 SP12 GT-SoftControl: Version 4.40 SP1 Linux: 2.30 Installed licenses Top labeler (Master): [+] SOFTCONTROL_1 [+] WEIGHT_CLASSES [+] EURO [+] LOADABLE_FONTS [+] PLUGIN_LABEL [+] SW_RELEASE_14 [+] SPEED_GLMI150 Bottom labeler (Slave): [+] SOFTCONTROL_1 [+] WEIGHT_CLASSES [+] CODE_PART_PRINT [+] EURO [+] LOADABLE_FONTS [+] 2D_CODE

Condition: used, Year of construction: 1984, functionality: fully functional, power: 4.2 kW (5.71 HP), inner dimension length: 5,300 mm, inner dimension width: 750 mm, inner dimension height: 620 mm, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, We are offering this used Lauber I S-6 chamber dryer for drying wood, manufactured in 1984. Dimensions of the stacking chamber: 530 cm long, 62 cm high, 75 cm wide, 2.4 cubic meters, 4.2 kW. Cabinet with side carriage: complete dryer with carriage, high-performance radial fan, electric heating, intake and exhaust flaps, safety thermostat, spraying device, sufficient number of corrugated stacking strips, access doors, internal rails made of aluminum casting, external rail with plastic coating, manual control type A, built-in measuring unit with two wood moisture sensors and one climate sensor. Isdpfxez Alhis Ahyeih Fully automatic temperature and climate control of the entire drying process according to the pre-selected drying gradient, with two wood moisture sensors and one wood equilibrium moisture sensor. If you have any questions or require further information, please send us a message or call us. Inspection is welcome. Sale only to buyers who collect the item themselves! The sale is made with the exclusion of any warranty.

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Ijdpfszzp Epox Ahyoih Power: 15 HP 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message.

Condition: used, Year of construction: 1994, operating hours: 392 h, functionality: limited functionality, machine/vehicle number: 1115, type of input current: three-phase, total height: 150 mm, total length: 2,200 mm, total width: 900 mm, overall weight: 1,800 kg, power: 11 kW (14.96 HP), input voltage: 380 V, Equipment: documentation/manual, Brand: Pawert Type: I-40/85 Year of construction: 1994 Iodpfszyau Esx Ahyeih Capacity: 150 kg/hour Briquette dimensions: Ø 40 mm Motor: 11 kW Weight: 1800 Including feed screw and discharge chute.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,613 h, functionality: fully functional, machine/vehicle number: B4/19-002/LV, total height: 2,591 mm, total length: 2,990 mm, total width: 2,438 mm, fuel: liquefied natural gas (LNG), overall weight: 5,000 kg, type of cooling: water, empty load weight: 4,900 kg, Equipment: documentation/manual, As part of the demonstration, the compression in all cylinders can be shown to be 15 bar. Electrical power – 50 kWe Thermal power – 80 kW Gas consumption – 14.6 Nm3/h Engine manufacturer – MWM Number of cylinders – 4 Generator manufacturer – Marelli Type – MJB 225 SA4 Power – 62.5 kVA Rated power – 50 kW Frequency – 50 Hz Voltage – 400 V Iisdpfxjz Rxgye Ahyjh

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Iijdpfxeyilyqo Ahyeh Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, WOLFF - Sand separation and washing plant Iiodsy N Rtyepfx Ahysh

Condition: good (used), Year of construction: 1975, pressing force: 250 t, stroke length: 140 mm, throat depth: 400 mm, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Iiodpfoz Rnnysx Ahysh Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Year of construction: 2006, condition: used, We offer this used Unigraphica Unicut 740 and S-74-3 Unigraphica Unicut 740 cutting machine, manufactured in 2006. Type: S-74-3 Version: S-74-3 Number: 006 Year of manufacture: 2007 Fuse: 16 A Rated current: 5.0 A Power consumption: 3.0 kW Power supply: 3 x 400/230 V 50/60 Hz Formats: 7"-27" Format divisions: 1/6" and 1/8" Paper weight: 60-250 g/m2 Maximum paper width: 740 mm. GUK K72/4 KTL-F4 folding machine Year of manufacture: 1996. Equipment: 4 standard cassettes (pockets), 1 blanking cassette, 1 electric cassette for performing special folds, cassette stand. The machine is operational but incomplete. Missing the controller and optical sensor for triggering the electric cassette, missing the reciprocating knife section. Modified sheet feed control. Iedpfx Ajy N Rcbshyoih The machine can be switched on and tested. If you have any questions or require additional information, please send us a message.

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swivel spindle milling machine, manufactured in 1996. This compact and robust milling machine features a spindle that can be swiveled up to 45°, multiple speed settings, and clockwise/counter-clockwise rotation. The spindle adjustment is conveniently done using the side handwheel. Technical specifications: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Swiveling milling spindle: up to 45° Clockwise/counter-clockwise rotation Motor brake Manual spindle height adjustment Milling fence with dust extraction option Weight: approx. 175 kg Used, well-maintained condition considering its age. The machine is compactly built and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be immediately available! The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee. Isdjzxx Egjpfx Ahyeih

Condition: refurbished (used), Year of construction: 2016, Installed Licenses (Master): [+] BRIDGE+MC_BUFFER [+] SOFTCONTROL_1 [+] WS_FOOD [+] STATISTICS [+] WEIGHT_CLASSES [+] CODE_PART_PRINT [+] EURO [+] LOADABLE_FONTS [+] KEY_LOCK [+] 2D_CODE [+] PLUGIN_LABEL [+] SPEED_GLMI150 (Slave): [+] CODE_PART_PRINT [+] EURO [+] LOADABLE_FONTS Isdpfxjz Nlvxo Ahyjih [+] KEY_LOCK [+] 2D_CODE [+] PLUGIN_LABEL

Condition: used, functionality: fully functional, FAMAD PDFD-I Wood Jointing Line 1. FAMAD DFC-60M Milling and Tenoning Machine Unit Input element length 170-900mm Milling height 20-155mm Milled element package width 650mm Carriage operating speed: Work 10-23m/min Return 32m/min 2. PHSL Pressing Unit Glued element width 35-155mm Glued element thickness 20-70mm Glued element length min/max 4500-6600mm Iodpfx Ahjw Iy Nyoyjih Possibility of programming inter-cuts Line capacity up to 4000mb/shift 3. General information Length 15700mm Width 3350mm Power demand 48kw Year of production 2006 Very good condition

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,000 mm, total length: 7,000 mm, total width: 2,500 mm, type of input current: three-phase, workpiece weight (max.): 5,760 kg, table height: 900 mm, working range: 6,000 mm, working width: 2,000 mm, cutting height (max.): 900 mm, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, working length: 6,000 mm, Equipment: documentation/manual, Fully functional plasma cutting machine in good condition for sale due to a change in equipment type. Iijdpfeyid Awjx Ahysh

Condition: used, Year of construction: 2010, power: 6.5 kW (8.84 HP), Long-belt sanding machine suitable for sanding both large containers as well as standard sheets and smaller components. The machine can also be used as a standard-height machine! Iodeywzvhepfx Ahyjih

Condition: excellent (used), Year of construction: 2024, Traverses X Y Z: 660mm x 406mm x 508mm, table size 762mm x 356mm, 10000rpm spindle, 20 station ATC, DIN40 spindle taper, Hurco WINMAX 5 control, coolant, Swarf Auger Iedsz Hayrjpfx Ahyoih