Used Ottobock Back X for sale (63,302)

Condition: used, machine/vehicle number: BXMS230118020, No minimum price – guaranteed sale to the highest bidder! The new price was €4,950! TECHNICAL DETAILS Relief for the lower back: up to 25 kg Support force: continuously adjustable MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 600 x 600 x 600 mm Weight: 5 kg FEATURES Purely mechanical control at hip height Automatic deactivation of support during walking Force absorption during bending and force release during lifting Load transfer from the shoulders to the thighs via a support structure Energy storage Iiodpfozz H D Aox Apcjg Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 2000

Condition: good (used), Year of construction: 1970, POREBA TR 70 BIS Conventional Lathe 700 x 2000 mm Heavy-duty conventional lathe in used condition. Iijdpfxoz Dkvfs Apcjg Manufacturer: POREBA Model: TR 70 BIS Swing over bed: 700 mm Swing over cross slide: approx. 420 mm Turning length: 2,000 mm Spindle bore: approx. 80 mm Spindle speed: approx. 10-1,000 rpm Main motor: approx. 14 kW 3-jaw chuck, faceplate Tailstock Additional chucks / faceplates included Machine weight: approx. 5,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Isdezy Ndcjpfx Apcjig Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: excellent (used), Year of construction: 2022, Weinig Dimter ProfiPress L II Comfort 2500 x 1300 Wood dimensions to be processed; Wooden input length min./max. 800 - 2500 mm Max. 3-bahnig Timber widths min./max. 40 - 150 mm Unequal fin width in a panel Wood thicknesses min./max. 4 - 30 mm Plate end widths variable min. / max. 200 - 1300 mm Wood species softwood/Hardwood, Spruce, Pine Full description on request. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Isdpfx Aez Dh S Ropcoig Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes C-axis speed range: 0–20 rpm Number of tools: 12 Iijdpjzwmztefx Apceg Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

Condition: ready for operation (used), functionality: fully functional, overall weight: 9,000 kg, Used impact crusher, Kleemann SDR 1000 x 230 mm, capacity 20 - 70 t/h, final grain size approx. 0/25 mm, maximum feed size 200 mm, weight approx. 9 tons. The crusher can be easily rotated by hand. Immediately available, subject to prior sale. Ijdszhn Hxjpfx Apcsig

Condition: excellent (used), Year of construction: 2019, Counter: 1,200,000 units Cycle counter: 8,297,167 cycles Hour counter: 5,281 hours Equipment / Additional information: Machine consists of: 1 x Main feeder 1 x Opener 4 x Insert stations 1 x Wrapping system (10,000 cycles per hour) with side sealing 1 x CROSS STACKER RIMA Options: 1 x Friction feeder 1 x Mosca inline coating unit 1 x 90° curve Ijdpfjz A Dmhex Apceig 1 x Videojet BX 6500 1 x Graftech server TECHNICAL DATA Product infeed: manual as standalone/automatic in line Film: centre-folded and flat film, e.g. PE, PO, PP, bio films, recycled content films Output: max. 10,000 cycles/h Passage width: 10–450 mm Passage height: max. 200 mm Product length: min. 80 mm Film width: max. 1,000 mm (flat film) Film roll diameter: max. 350 mm Control system: Siemens Sinamics D Display: Siemens 9" TP 900 touchscreen Electrical design: in accordance with VDE guidelines Working height: adjustable from 850–950 mm

Condition: used, mileage: 122,565 km, power: 1,000 kW (1,359.62 HP), first registration: 01/2007, fuel type: diesel, color: white, axle configuration: 6x6, operation weight: 600,000 kg, empty load weight: 45,440 kg, driver cabin: day cab, gearing type: automatic, suspension: other, Year of construction: 2007, operating hours: 23,137 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, trailer coupling, Towbarless Push-Back: - Goldhofer - AST-1X 1360 - Year of construction 2007 - 122,565KM; 23,137 operating hours - 2x Deutz diesel engine TCD 2015 V08, 15,874cc each; 500kw - 1x Deutz BF4M1013C, 110kw (GPU) - Hydrostat (Vmax 32km/h) - Drive: 6x6 - additional GPU - Optional front-wheel, all-wheel or crab steering - StrobeLights - tows up to a maximum aircraft weight of 600,000KG (Airbus A380) - Swivel seat - Cabin can be raised and lowered - Climate control - Weight: 45.440Kg - 11.50m x 4.50m x 1.65m (lxwxh) - Machine is currently running in emergency mode for the following aircraft types: Boing: - B767-200...300 - B767-400 - B777 - B747 Iiodpsqxt N Ujfx Apcog Airbus: - A300/310 - A330-200...300 - A340-200...300 - A340-500...600 - A380-800...800F McDonnell Douglas: - DC-10 - MD-11 You can find a video of this offer on You can find our entire vehicle inventory at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 1,332 h, construction height: 180 mm, construction width: 220 mm, No minimum price—guaranteed sale to the highest bidder! Markforged Metal X TECHNICAL DETAILS Printing process: ADAM – Atomic Diffusion Additive Manufacturing Build volume: 300 × 220 × 180 mm Max. part size: 250 × 183 × 150 mm Max. part weight: 10 kg Layer height after sintering: 50 µm and 125 µm MACHINE DETAILS Supported materials: Copper, 17-4PH stainless steel, Inconel 625, H13 tool steel, D2 tool steel Print chamber: heated Print bed: heated, vacuum-sealed print plate, automatic print bed leveling Printing system: two nozzles for metal material and release material Dimensions & Weight Dimensions: 575 × 467 × 1,120 mm Weight: 75 kg Power supply: 100–120 / 200–240 V AC Current consumption: 12 / 6 A Connection: IEC 60320 Type C20 Operating hours: 1,332 h EQUIPMENT Markforged Wash-1 Debinder Markforged Sinter-1 Sintering System Markforged Wash-1 TECHNICAL DETAILS Debinder Supported materials: all metals Cleaning media: Opteon SF79, Opteon SF80, or Tergo Metal Cleaning Fluid Control: integrated control system Workpiece holder: Stainless steel basket Washing area: 356 × 254 × 203 mm Washing volume: 18,356 cm³ MACHINE DETAILS Power supply: 110–120 V AC, single-phase Current consumption: 11 A Peak power consumption: 1,320 W Dimensions & Weight Dimensions: 609 × 685 × 1,067 mm Weight: 136 kg FEATURES Integrated control system Iijdpozx Rkbjfx Apcjg Stainless steel basket Shut-off at low fluid level Shut-off at high vapor pressure Markforged Sinter-1 TECHNICAL DETAILS Furnace specifications Supported materials: chemically debound parts printed with Metal X Heating element: Kanthal Control: preprogrammed automatic cycle control Sintering cycle: 26 h Max. internal temperature: max. 1,300 °C Sintering capacity: 141 mm inner diameter × 305 mm length Sintering volume: 3,020 cm³ Sintering surface area: 348 cm² for a ceramic setter plate Setter plate dimensions: 11.4 × 30.4 cm Process gases: argon, argon-hydrogen mixture Retort: high-purity, carbon-free refractory retort MACHINE DETAILS Exhaust air requirement: 100–150 CFM, external exhaust Power supply: 200–240 V, single-phase Current consumption: 30 A Recommended circuit breaker rating: 50 A Dimensions & Weight Dimensions: 1,270 × 510 × 720 mm Weight: 136 kg FEATURES Pre-programmed automatic cycle control Kanthal heating element Ceramic setter plate High-purity, carbon-free refractory retort

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 770 x 490 x 440mm, Table 1372 x 356mm, Spindle speed 5000 rpm, Spindle taper ISO40, Spindle Motor 3.75kW, ProtoTRAK SMX Control, Isdpfx Aoy Ex U Djpcsig low volt light, interlocked guards, coolant.

Condition: ready for operation (used), turning diameter over cross slide: 530 mm, turning diameter: 800 mm, overall weight: 10,000 kg, Poreba Heavy Duty Gap Bed Lathe Iiodpfsz Dh U Ssx Apcog Model: TPK 80 Distance Between Centres: 5000mm Swing Over Bed: 800mm Swing Over Topslide: 530mm Swing In Gap: 1080 x 200mm Spindle Speeds: 8-1500 RPM Spindle Bore: 95mm Motor: 23 KW Machine With: 800mm 4 Jaw Chuck 400mm Roller Steady 300mm Pad Steady

Condition: used, Oscillating shear machine KÖLLSCHEN, type BSK 2000/2 Cutting length: 2000 mm Cutting thickness: 2 mm Stand overhang: 90 mm Working height: 920 mm Power supply: 380 volts, 50 Hz Motor power: 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet metal holder - Manual back gauge, 500 mm - Gauge adjustment via 2 handwheels, at the rear on the back gauge guide with a measuring scale - Front side gauge, left, 720 mm - Electric foot switch - Manual central lubrication - Control cabinet on the machine - Machine rests on 4 oscillating elements, approximately 100 mm in height Isdpeifu Ansfx Apceig Space requirement (L x W x H): 2800 x 1700 x 1450 mm Weight: 2300 kg Good condition

Condition: ready for operation (used), functionality: fully functional, shelf height: 3,500 mm, Nedcon Frames – approx. 350 or 400 x 110 cm | inspected & used Iisdpfezy Uhajx Apcsg The Nedcon frames, measuring approximately 350 or 400 x 110 cm, come from our inspected used stock and are available immediately from our warehouse. They are ideal for expanding existing Nedcon pallet racking and heavy-duty racking systems. Thanks to their robust construction, the frames can be reliably used in daily warehouse operations. Matching crossbars can also be offered upon request. Data: Height: 350 cm or 400 cm Depth: 110 cm Color: Blue Racking system: Nedcon Used goods, available from stock, immediate delivery -- MULTIPLE UNITS AVAILABLE IMMEDIATELY -- Price: Negotiable You will receive an invoice with VAT shown. STILL HAVEN’T FOUND WHAT YOU’RE LOOKING FOR? Visit our website, where you can quickly view many offers and variations of the products! Transport: Delivery can be arranged by our partner logistics company, if desired; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your equipment, if required. Our recommendation: Please let us know your requirements... We will be happy to help you realize your projects, from planning to ordering and assembly. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us via message or phone. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: good (used), Year of construction: 1990, functionality: fully functional, Internal article number: 26097 Vibratory finishing system Rösler R1100 / 1300 TS15 Year of manufacture: 1990 Last maintenance with service report from 02/2026 The system is fully functional and in good condition. The lining in the containers is also in good condition! Iijdpfx Asz Da Drjpcog Operating hours according to the maintenance report: approx. 28,766 hours (as of 02/2026) 2 vibratory finishing tubs Dimensions per tub: (L x W x H) approx. 130 x 120 x 100 cm Overall dimensions with enclosure: (L x W x H) approx. 700 x 200 x 200 cm + Arm with control unit The system is available for demonstration and will be offered with free loading onto a truck.

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 3.6 m, with 2 Honda MR-20L 20-pin connectors for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iodpfxsz Dnzrj Apcjig

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 6.8 m, with 2 Honda MR-20L 20-pin connectors for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ijdpez Dnz Sjfx Apcjig

Condition: ready for operation (used), TACHII 1990 sensor cable/interface cable, length 3.4 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iodpfoz Dnzljx Apceig

Condition: ready for operation (used), TACHII 1990 sensor cable/interface cable, length 3.9 m, with 2 Honda MR-20L 20-pin connectors for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iijdpfjz Dnzxjx Apcsg

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 4.2 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Ijdpez Dnz Eefx Apcoig

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 7.4 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Iisdpfx Ajz Dn Acjpcjg

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 2.2 m, with 2 Honda MR-20L 20-pin connectors for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iisdpfxjz Dnzfj Apcsg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, load capacity: 6,300 kg, power: 6.1 kW (8.29 HP), main lifting speed: 4,000 mm/min, working height: 3,200 mm, Crane system with 2 ABUS traveling cranes (each with a lifting capacity of 6,300 kg) TECHNICAL DETAILS Number of traveling cranes: 2 Lifting capacity per traveling crane: 6,300 kg Main lifting speed: 4,000 mm/min Fine lifting speed: 700 mm/s Working height: 3,200 mm MACHINE DETAILS FEM remaining service life assessment: 0.00 full load hours consumed Iiedpfxozyl Rxo Apcsg Theoretical remaining service life: approx. 20 years Crane track steel structure: Double-T girders Power: 6.1 kW Dimensions & Weight Dimensions (L x W x H): 18,000 x 7,735 x 4,500 mm Total weight: 3,500 kg EQUIPMENT 2 ABUS traveling cranes, each with a lifting capacity of 6,300 kg Portal Crane track steel structure made of double-T girders Complete manufacturer and inspection documentation Manual Drawings Inspection reports Wiring diagrams

Condition: new, TC 180 x 1000 V Center distance: 1000 mm Center height: 178 mm Swing over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2500 RPM Mechanical feed steps: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Inch thread: (32) 4 - 56 TPI Module thread: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking system (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gear - Pulse button for main spindle - CE / IEC as well as German documentation and German service Ijdoir Imyjpfx Apcsig Standard equipment (standard accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way tool post - Foot pedal with mechanical braking system - Coolant system - Chuck guard and spindle cover in accordance with European CE safety standards - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix also available as geared variants

Condition: used, diameter 200 mm boring diameter 40 mm - / Iiedoy S Dt Sjpfx Apcjg

Condition: excellent (used), max. wheel diameter 250 mm Iedpfx Aoz Dbzropceig gear width 40 mm max. module 6 min. module 1 number of teeth 8 - 100 cone distance 310 mm pressure angle 15 - 30 ° blade cutter head diameter 450 mm pivoting angle 0 - 90 Grad total power requirement 16 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 2,2 x 1,7 x 1,7 m Change gears, chip conveyor, cutting heads, knifes,...