Used Oscillator for sale (654)

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Pgjdsz Ru Iyopfx Angou Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, MAKA oscillating hammer drilling machine, slot drilling machine # TYPE STV 170 Year of manufacture: 1991 Pgodpfez Efwyjx Angeu Includes 2 additional drilling units and a large amount of accessories, including stops, etc. Condition: see pictures (See pictures – as is) – a prior inspection is highly recommended. Subject to prior sale. All information without guarantee. The items can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. The shipping costs are an estimate and may vary depending on the distance and weight; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: good (used), functionality: fully functional, pneumatic clamps automatic material feeding Pgsdpfxjz R S Dgj Angeu unit angle regulation pneumatic movement of heads material support slot length regulation slot distance regulation

Condition: excellent (used), Year of construction: 2012, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Digital Phosphor Oscilloscope Tektronix TDS 5054 Digital oscilloscope 500 MHz bandwidth 5 Gs/s sampling rate 4 channels 8 bit resolution Printer included Pedpfx Aj Afqkrongjgu CD disk reader Extensive waveform math 4x 500 MHz probes included Original software included Manuals, operation and service

Condition: excellent (used), Year of construction: 2018, operating hours: 4,832 h, functionality: fully functional, machine/vehicle number: 2017058, total length: 7,000 mm, total width: 1,800 mm, overall weight: 5,650 kg, Montresor LOLA 10.8 DX edge grinding machine • Belt running direction: RIGHT to LEFT, year of manufacture: 03/2018, #2017058 • In excellent optical and technical condition – only 4,832 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 3 pneumatic lower and 3 upper chamfer supports • Belt infeed: motorized calibrating/profiling support • Belt outfeed: motorized water-jet support • Automatic centralized oil and grease lubrication • Double-row table extension console • Space requirement approx.: 700 x 180 cm, infeed and outfeed path: 200 x 60 cm Psdpfx Aoz Rk E Uengegu Optional services available, such as: freight, installation, and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, does not include tools, attachments, and accessories; items shown in the pictures are not included with the machine/scope of delivery. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is" with exclusion of all warranty claims Inspection possible • at the facility near Rosenheim Availability • after delivery of the new machine, approximately January/February 2027

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: Pgsdezgr Iqspfx Angeu The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: excellent (used), CATALOG NUMBER 7567 TECHNICAL SPECIFICATIONS - Automatic strip feeding - 2 pneumatic clamps - Aggregate angle adjustment - Pneumatic spindle movement - Simultaneous machining of 2 sections - Groove depth up to 25mm - Support rails - Oscillating drill movement adjustment - Feed stroke adjustment - Automatic stop - Inclination from 90 degrees (vertical) to 0 degrees (horizontal) - Main motor 1.1kW - Oscillation motor 0.75kW - Working pressure 6-8 bar - Dimensions (L/W/H) 4020x1150x1400mm - Weight approx. 480kg ADVANTAGES – For window production – Oscillation – Pneumatic clamps – Not painted – Italian made – Used machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) Pgjdpsztzd Isfx Angou (Prices may change with major fluctuations)

Condition: used, The Reckmann LM 16 profile grinding machine grinds profiles on wooden workpieces for woodworking. It is used to machine workpieces with profiled surfaces. The profile is transferred to the workpiece by means of feed, an oscillating grinding block and a swivelling holder Technical data: Pgedpo Agf Dwjfx Angou - Workpiece width: max. ~ 120 mm - Workpiece height: max. ~ 80 mm - Grinding motor: 0.37 kW

Condition: like new (used), Year of construction: 2017, S&F Oscillating Screen | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screening area: 2.0 m² per screen mesh size Screening decks: 1 piece Mesh size of the screen: - 1. screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Model: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 3000 Flame Red incl. 1 piece Modular silo type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Item no.: 406.4345 Incl. extension feet L = 1,100 mm Incl. hopper attachment and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass Psdpfx Aney Aa Ugjgjgu - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Year of construction: 2021, operating hours: 2,608 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 06421, COMANDULLI EDILPLUS 8+6 DX model Belt running direction: RIGHT to LEFT, year of manufacture 2021, #06421 • Annual maintenance last performed on 10/08/26 – only 2,608 operating hours Psdpfx Asz Rk Hfsngsgu • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 upper chamfer supports (height-adjustable) • Belt infeed: Calibration/profile support, both axes motorized • Pneumatic finishing/stock support • Belt outfeed: Water nozzle support, both axes motorized • Automatic centralized lubrication system • Table extension console, double-row • Space requirement approx.: 630 x 180 cm, infeed and outfeed area: 300 x 60 cm Optional services available, such as: freight, installation and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories in the pictures are not included in the machine/scope of delivery Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold as is, with no warranty of any kind Inspection possibility • at the operating site near Bitburg Availability • after delivery of the new machine, approximately February 2027

Condition: used, Year of construction: 1999, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, total length: 9,200 mm, total width: 1,600 mm, overall weight: 4,000 kg, Equipment: CE marking, For sale: OTT Euromatic edge banding machine Machine data: * Year of manufacture: 1999 * Machine length: 9,200 mm * Machine weight: approx. 4,000 kg * Maximum edge thickness: 60 × 15 mm * Edge thickness up to 20 mm also possible (by adjusting the flush trimming unit) * Minimum workpiece width: 60 mm * Minimum workpiece length: 160 mm Equipment: 1. NC-controlled infeed fence 2. Joining milling unit Podpfx Ajz S U S Isngogu 3. Glue application 4. Pressure zone 5. Miter saw (swivels 15°) 6. Flush trimming unit 7. NC-controlled chamfer milling cutter (0–3 mm) 8. Rounding milling cutter R2 9. Corner copying unit R2 (postforming processing possible) 10. Rounding scraping blades 11. Surface scraping blade 12. Oscillating buffing unit 13. NC-controlled upper pressure bridge Notes: * The dust extraction system is not included in the sale. * The machine will be disassembled by us and delivered to the workshop door. * Loading can be arranged upon request (not included in the purchase price). * The removal of the machine must be organized by the buyer and will be at their own expense. * Sale due to the purchase of a new machine. * Available from the 1st week of December 2026. * The machine can be inspected and tested at any time by prior appointment.

Condition: used, Year of construction: 1975, Manufacturer : Frewitt Model: MGIF 624 Pgodpjx R Av Nofx Angju Year : 1975 Type: Stainless steel oscillating arm granulator Material : stainless steel Overall dimensions: 130 X 90 X 250 CM Motor power : 1,5 KW Rotor dimensions: length 44 cm / diameter 13 cm Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Capacity: approx. 1000 kg/h depending on product Technical file available.

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: Psdo Af Uubspfx Angjgu – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting Podpfxjw Dn S As Angogu With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: used, Sicma brand double horizontal drilling and oscillating machine with 3 drilling spindles and 1 oscillating spindle, used. Pedezxg Ivepfx Angegu

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, manufactured in 2003 - Can also be operated separately without Ligmatech - Pgjdsz Dxh Nopfx Angeu - Ideal for high-quality furniture production; HPL and matte decors are no problem - Machine completely controlled by PLC, almost everything can be adjusted at the control panel; no defects; well-maintained machine used with expertise. Leuco Z3 edge trimming cutter installed; a second set of cutters is available, along with various insert blades. Panel thickness max. approx. 48 mm; edge banding from 0.3-15 mm possible. Chain conveyor renewed approximately 10 years ago. Spray system for separating and cleaning agents, controlled according to application. - Jointing fence, motor-driven, program-controlled. - Edge trimming spindles 1961, 2 x 2.0 kW. - Glue system, cartridge 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. - Pressing unit 1903 MOT, pressure of 1st and other rollers adjustable separately. - Miter saws 1918, bevel cuts adjustable. - Flush trimming 1823. - Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable at the control panel). - Profile trimming blade 2 mm 1929, pneumatically timed. - Corner copying unit 1983, carbide, with adjustment at the control panel, functional, but needs fine adjustment. - Straight trimming blade 1964. - Oscillating unit, controlled according to application. Includes all operating manuals, documentation of process points digitally and in printed form by Holzher technicians. One set of DIA edge trimming cutters is included, as well as various insert blades for the trimming units. Chip transport system ZHR 15 Boomerang, manufactured in 1995 Mounted on the machine with connection to the pressing bridge, easily adjustable from the front panel, with rotating device for parts. Adjusted to the feed rate; sensors still available from HOMAG. - Information without guarantee; the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee, and liability for defects. The buyer has inspected and tested the machine before purchase. - Sale only to commercial businesses; machine is currently powered and in operation. Price is negotiable. Machine available after clarification in December/January 2027. Crane or forklift loading also possible from an external warehouse.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1289892, FREWITT MG-800 OSCILLATING SCREENING AND GRANULATING MACHINE Pharmaceutical version – Stainless steel – Comprehensive documentation DESCRIPTION For sale is a Frewitt MG-800 oscillating screening and granulating machine in high-quality stainless steel/pharmaceutical version. The machine is in very good and well-maintained condition and is fully functional. The MG-800 is suitable for the controlled crushing, granulation and screening of products, especially in the pharmaceutical, chemical and food industries. The oscillating operating principle, in combination with interchangeable screen inserts, allows for adaptation to different products and desired particle sizes. PHARMACEUTICAL/STAINLESS STEEL VERSION The original Frewitt specification documents a high-quality stainless steel design: - Machine body stainless steel 1.4401 - Product-contacting parts stainless steel 1.4301 - Product-contacting interior surfaces polished - High-quality, hygienic design - Enclosed machine design The system was designed for professional use in demanding production environments. TECHNICAL DATA Manufacturer: Frewitt, Switzerland Model: MG-800 Machine No.: 1289892 Machine type: Oscillating screening/granulating machine Voltage: 380 V Frequency: 50 Hz Current consumption: 4.4 A Version: Stainless steel / Pharmaceutical version EQUIPMENT - Frewitt MG-800 granulating machine - Stainless steel feeding system - Stainless steel discharge system - Rotor - Screen basket - Extensive selection of various screen inserts - Infinitely adjustable speed control - Protection and safety devices - Separate operating/control unit - Sturdy stainless steel base - Extensive stainless steel piping and connections The various screen inserts available allow for flexible adaptation to different products and desired granule or particle sizes. DOCUMENTATION Extensive original Frewitt documentation is available for the machine, including: - Technical documents Pgjdpfx Anovt Sywjgsu - Original drawings - Design drawings - Specification and material specifications - Spare parts/component information The available original documentation is particularly advantageous for use in pharmaceutical and industrial environments. CONDITION / FUNCTION The machine is in very good used condition and is fully functional. Inspection and test run are possible by arrangement at our premises. Price on request. Subject to prior sale and errors.

Condition: like new (used), functionality: fully functional, SURDRY 6-Cage Oscillating Autoclave – Industrial Sterilization SURDRY oscillating autoclave with a capacity for 6 cages, designed for the sterilization and thermal treatment of packaged food products in industrial batch processes. The equipment incorporates an oscillating load movement system during the thermal cycle, allowing the packages to be kept in controlled motion during specific phases of the process. This technology is particularly beneficial for products where agitation can promote heat transfer and reduce process times, depending on the product, format, and recipe. Its 6-cage configuration provides a high processing capacity for continuous production industrial facilities. MAIN FEATURES -Manufacturer: SURDRY -Type: Industrial oscillating autoclave -Capacity: 6 cages -Application: sterilization / pasteurization -Oscillating load movement system -Batch thermal treatment -Horizontal chamber -Industrial construction in stainless steel -Large-diameter front door -Safety locking system -Motorized drive of the oscillation system -Control of cycle parameters -Integrated piping and valve system -Designed for industrial production -Integrable into automatic sterilization lines PROCESS The SURDRY 6-cage oscillating autoclave is designed to perform controlled thermal treatments on previously packaged products. The loaded cages are placed into the chamber, and once closed, the programmed cycle is carried out through different phases of heating, thermal maintenance, and cooling. During the treatment, the system allows for the application of a controlled oscillating movement to the load. Depending on the product, this agitation can improve internal circulation and promote faster and more uniform heat transfer. It can be integrated with: -Automatic loading and unloading systems -Cage conveyors Psdpfsx Tiliex Angogu -Basket loaders and unloaders -Cage transfer systems -Process water preparation equipment -Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial pasteurization or sterilization processes. Depending on the configuration and process, it can work with cans, jars, trays, pouches, and other packaging suitable for thermal treatment in an autoclave. The combination of SURDRY technology, oscillation system, and 6-cage capacity provides a particularly interesting solution for high-capacity industrial sterilization facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), SCM sandya 3s 950mm WIDE BELT SANDER Sanding width: 950 MM 1 calibrating unit with a metal roller Pods Afunhepfx Angjgu 2 combination unit with a rubber roller and sanding pad The sanding pad has an oscillating motion One motor for 2 units - 7.5 kW Oscillation controlled by photoelectric cells 2 feed speeds Electric table adjustment Table position display Thickness gauge Very good condition, inspected, ready for operation

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame Pedpfx Aoqpdi Uongjgu with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence immediately available Location: Austria, near Klagenfurt

Condition: used, Year of construction: 2005, operating hours: 847 h, power: 49 kW (66.62 HP), Equipment: all wheel drive, front linkage, Inspection newly performed. The Antonio Carraro SRX 8400 is a specialized articulated compact tractor (narrow-gauge tractor) primarily designed for use in viticulture, fruit growing, landscaping, and on steep alpine slopes. It belongs to the well-known Ergit series from the Italian manufacturer. Pedpfj Agdy Hex Angogu The SRX 8400's outstanding feature is the RGS rotating seat system, which allows the driver's seat, including the steering wheel and pedals, to be rotated 180 degrees in seconds. This enables the tractor to be operated with both rear and front-mounted implements (such as hedge trimmers or mulchers) with optimal visibility. Technical data at a glance: Manufacturer / Model: Antonio Carraro SRX 8400 (Ergit series) Engine: VM Motori, 3-cylinder turbocharged diesel (Tier 3A) Displacement: 2,228 cm³ Power: approx. 70 hp / 51.5 kW (at 2,300 rpm) Max. torque: 255 Nm at 1,650 rpm Chassis / Frame: ACTIO (integral oscillating frame), articulated steering, all-wheel drive Transmission: Synchronized reversing gearbox with 32 gears (16 forward / 16 reverse) Maximum speed: 40 km/h PTO: Rear independent: 540 / 540E rpm, as well as a live PTO.

Condition: used, Year of construction: 2023, functionality: fully functional, operating hours: 1,031 h, workpiece length (max.): 2,500 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 700 mm, number of slots in tool magazine: 18, Equipment: documentation/manual, 5-AXIS MILLING PLOTTER 2531 Specifications: 2500 X 3100MM, Z-AXIS RANGE 700MM HITECO 13.5KW S6 TILTING/ROTARY HEAD SET A-AXIS RANGE: +/–120°, C-AXIS RANGE: +/–320°, ROTARY TILT T-JQX 29L0549395D ELETM QX-2 11/12 24 63F NC HSK63 FOR 5-AXIS MACHINES AIR CONDITIONING FOR THE CONTROL CABINET ACTIVE COOLING SYSTEM – CHILLER CW-6000 (FOR SPINDLES UP TO 20KW) LINEAR TOOL MAGAZINE, 18 POSITIONS, FOR 5-AXIS MACHINES Pgjdez Suyropfx Angou ROTARY TOOL MAGAZINE, 16 POSITIONS, HSK63F AUTOMATIC CENTRAL LUBRICATION SYSTEM WITH SKF GREASE SAFETY ENCLOSURE WITH ELECTRONIC SAFETY SYSTEM (FOR 5-AXIS MACHINES OR MACHINES WITH A TILTING ELECTRO-SPINDLE) WALTER SKTG 5.5 P COMBO SCREW COMPRESSOR WITH DEW POINT DRYER REMOTE SERVICE ACCESS (REMOTE DIAGNOSTICS) CONTROL SYSTEM FOR TWO PUMPS UP TO 11KW TOTAL (PROTECTIONS + SOFT START + PRESSURE RELIEF VALVE) BUSCH MV 0312B-5.5KW VACUUM PUMP, CAPACITY 290M3/H, MAX. ULTIMATE PRESSURE 150MBAR (ABS) 2131 EXPERT MILLING PLOTTER, WORKING AREA 2100X3100MM Specifications: WORKING AREA 2100X3100MM - Z-AXIS TRAVEL RANGE 300MM, EXPERT, PRO - OMRON SERVO AC HIGH-SPEED DRIVES (COMPLETE WITH PLANETARY GEARBOXES) 1.5KW ETHERCAT - 2131 RASTER VACUUM TABLE - POROUS SUPPORT PLATE (1200 X 2500 X 12 MM) - PNEUMATICALLY CONTROLLED VACUUM SECTION, 6 PCS - CONTROL SYSTEM FOR TWO PUMPS UP TO 11KW TOTAL (PROTECTIONS + SOFT START + PRESSURE RELIEF VALVE) - BUSCH MV 0312B -5.5KW VACUUM PUMP, CAPACITY 290M3/H, MAX. ULTIMATE PRESSURE 150MBAR (ABS) - INDUSTRIAL REAL-TIME CONTROL SYSTEM (MS) OSAI OPENSMART, CYCLE TIME BELOW 2MS, UP TO 16 AXES SUPPORT, ETHERCAT COMMUNICATION WITH A SMALL CONTROL CABINET - HITECO 7.5KW S6-ATC ELECTRO-SPINDLE SET, UP TO 24,000 RPM, FAN-COOLED, TOOL MOUNTING - LINEAR TOOL MAGAZINE, 6 POSITIONS - ACTIVE OSCILLATING KNIFE – PNEUMATIC - OPTION FOR OSCILLATING KNIFE: CREASING HEAD - OPTION FOR OSCILLATING KNIFE: DISC KNIFE (INSTEAD OF THE WRITING HEAD) - PNEUMATICALLY MOVED EXTRACTION FOOT (WITH OUTLET FOR CONNECTING AN EXTRACTION SYSTEM/VACUUM CLEANER) - PREMIUM COOLING MIST, 1 PCS - BASE POSITIONING CONTROL - POSITIONING BASE 25MM, 1 PCS (MINIMUM 3 PCS) - OSAI LASER FOR POSITIONING - AUTOMATIC CENTRAL LUBRICATION SYSTEM WITH SKF GREASE - CAD/CAM VECTRIC CUT 2D PRO - SAFETY ENCLOSURE WITH ELECTRONIC SAFETY SYSTEM - HSK-F63 STARTER KIT (5 HSK-F63 TAPER HOLDERS + 18 ER32 COLLETS IN THE RANGE OF 3-20MM) ELECTRIC CHAMBER OVEN FOR HEAT TREATMENT, SwissTherm PKK-7500 Specifications: Chamber Dimensions: 2500x1000x3300 Maximum Temperature: 180 Voltage: 3/N/PE AC 400/230 V, 60 kW, 100A Peel3 Scanner Software: DPS Software, SolidCam 3D, Solidworks Professional, DraftSight Enterprise Schmalz Conveyor Jumbo Ergo 65kg vacuum manipulator system with a lightweight aluminum boom for ergonomic operation HP A3500 ZBOOK FURY 16 G10 Mobile Workstation, 1TB, 132GB, NVIDIA RTX

Condition: used, Year of construction: 2009, For sale is a used Bullmer PremiumCut CV. Pede Ab Nr Hspfx Angogu Year of manufacture: 2009. This cutting machine comes from a company liquidation. Technical data according to the supplier: Working area: 1900 x 1450 mm Maximum cutting speed: V max Wm/min Cutting thickness: 10 mm Knife system: Oscillating drag knife and ultrasonic knife Increased air flow: 50 m3 per minute instead of 42 m3/minute Vacuum unit: Modified to a Rovicore RTM vacuum table with a distribution channel. The cutting machine has been dismantled and is stored at our facility. An inspection is possible by prior appointment.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A80722MM2, grinding width: 1,350 mm, power: 31 kW (42.15 HP), height adjustment type: electric, Automatic leveling wide belt sander suitable for fine sanding of solid wood. This sander belongs to the top range of automatic wide belt sanders and stands out, in particular, for its small machine size, perfect sanding quality, ease of operation, and high reliability. It was used for final sanding of solid parquet. 2 main units: soft sanding cylinders, 1350 mm Additional units: Scotch-Brite brush, cleaning brush, cleaning air blowers Total maximum power consumption: 31 kW Sanding width: 1350 mm Pgjdpoy Idxyefx Angou Max. workpiece height: 160 mm Constant working height of the machine – suitable for integration into a production line Motorized adjustment of working thickness with LCD display Continuously adjustable feed rate of the conveyor belt Continuously adjustable speed of both working units Pneumatic blowers for the working units Ammeter for monitoring motor load Remote shutdown of units from the control panel Stop with 4 positions for compensating for belt grit Perforated conveyor belt with the option of vacuuming up parts Roller extension of the table at the input and output Pneumatic oscillation, electronically controlled CE safety standard Weight: 3800 kg Year of manufacture: 2008 Damage to the first sanding cylinder – see photo Negotiable price: 25,000 EUR (excluding VAT) The machine is fully functional and sold in its current condition. In stock in Telnice, near Brno – Czech Republic Testing, demonstration, and operator training are included.

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. Podpfx Ano Adfddjgogu • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!