Used Ops Ingersoll Gantry Eagle 800 for sale (9,358)

Condition: excellent (used), Year of construction: 2011, operating hours: 1,703 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, tank capacity: 800 l, OPS INGERSOLL Gantry Eagle 800 year of manufacture: 2011 travel: x, y, z 550 x 850 x 450 mm control: Eagle Power Tec electrode changer: 20 pieces 3D probe 3D probe on the table magnet: 400 x 200 mm C-axis EROWA clamping system fire extinguishing system remote control chiller includes approximately 600/700 liters of dielectric fluid Laedpfszgt Rmjx Ab Aoh includes drawer cabinet with contents documentation machine is powered on for inspection

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. 3R clamping system Ledpfxjx Htfys Ab Ajah Year of manufacture: 2017. Inspection under power possible.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: July 2026 Excellent condition, very few operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn rapid programming Powertec handheld, multifunctional handheld control unit Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) Laedpfx Abozvctps Aeh High Speed Jump: max. 18,000 mm/min. Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system 24.09.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: June 2026 Excellent condition, low operating hours (1540 hours of eroding time) EAGLE Powertec PC/NC control system 3060 Lasdpjzkftbefx Ab Aeh 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld, multifunctional control unit Manual eroding with Powertec handheld EAGLE Powertec - fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump: max. 18,000 mm/min. Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: June 2026 Excellent condition, low operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional control unit Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer with 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Laodpfx Abeyzxd Dj Ash Erowa, type UPC production chuck CO2 fire extinguishing system 16.10.

Condition: used, Year of construction: 2008, functionality: fully functional, 1 OPS INGERSOLL Gantry Eagle 800 wire erosion machine with IMC5 handling system, manufactured in 2008. In very good condition and in operation until December 2025. Lajdpfx Abey Ifu Ns Aeh Now dismantled. Includes 1 M.T.A TAE EVO M10 cooling unit (manufactured in 2012). 1 Kraft & Bauer FB703 fire extinguishing system. Weight approx. 6,700 kg. Available for sale at a favorable price. Price significantly reduced!

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Travel paths X/Y/Z: 1000/1510/700 mm C-axis 30-way electrode changer Hirschmann clamping system Support surface WxD 1140/1640 mm Laodps Adl Ntefx Ab Aeh Load capacity 7500 kg Filter system Fire extinguishing system

Condition: excellent (used), Year of construction: 2022, operating hours: 20,771 h, functionality: fully functional, travel distance X-axis: 1,010 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 700 mm, overall weight: 12,500 kg, For sale: Ingersoll Gantry 1200 Year of manufacture: 2022 Machine table size: 1630mm x 1130mm Laodpfx As Accv Uob Aoh Maximum table load: 7500kg Electrode changer: 30-position Total weight: approx. 12000kg Maximum bath height: 650mm minus 40mm FCS plate (not included in the price) Dielectric fluid height max. 610mm

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Ljdpsz Azk Hefx Ab Ajah Year of manufacture: 2015 General overhaul: August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual eroding with Powertec handheld EAGLE Powertec - fine and rough machining generator PT 60, 60 Amperes (60 Amperes peak current) High-speed jump max. 18,000 mm/min. Travel ranges (X, Y, Z) 420 x 300 x 300 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Original images will follow. 10/15

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 880 mm, travel distance Y-axis: 1,360 mm, travel distance Z-axis: 700 mm, table width: 1,110 mm, table length: 1,610 mm, overall weight: 12,500 kg, number of axes: 4, This 4-axis OPS INGERSOLL Gantry Eagle 1200 Plus was manufactured in 2014. It features a robust weight of 12,500 kg and includes a rotary tool changer magazine with multiple electrode holders. If you are looking to get high-quality die-sinking capabilities, consider the OPS INGERSOLL Gantry Eagle 1200 Plus machine we have for sale. Contact us for further details. - Control system: Eagle Powertec PC/NC Steuerung 3060 (22" Touchscreen display, Multiprog Powertec technology programming, Powertec 2 Easy Burn fast programming, Powertec Handheld, Ethernet and USB interfaces, MultiControl light remote maintenance)- Fine finishing generator: Eagle Powertec PT60- Z-axis speed: Eagle Power Jump with 18 m/min interval speed in Z-axis- Travel X / Y / Z: 880 x 1360 x 700 mm- Distance table / chuck min./max.: 440 / 1140 mm- Worktable dimensions: 1110 x 1610 mm (table clamping surface recessed 50 mm compared to standard)- Dielectric height: 960 mm (Option: 1000 mm)- Special telescopic working tank (W x L x H): 1140 x 1640 x 1040 mm- Max. head load: 300 kg- Additional dielectric fluid capacity: 2000 l (Total 4800 l with extra tank and connecting hoses)- Electrode changer: EW30 (30-fold) / 13-fold base unit- Measuring system: Linear measuring system in X and Y-axis (already included in Z-axis)- Electrode clamping system: Hirschmann H5000 / Minifix (H8.11.20)- Energy saving function: ECOTEC- Flushing: Programmable pressure flushing, manual suction connection- Filter system: 32 m² paper candle filter- Cooling: Compressor re-cooling unit- Main voltage: 400 V3~ / 50Hz- Control voltage: 24 VDC- Max. fuse: 32 A- Power consumption: 20 kVA- Total weight: approx. 12,500 kg (Machine base: 10,000 kg, Gantry/Portal: 2,500 kg, Extra tank: 1,100 kg)- Additional features: C-axis without chuck, CO2 fire extinguishing system, T-slot plate for large electrode mounting, machine shoes, preparation for external erosion mist extraction nozzle, fire damper, structural paint finish in Cobalt Blue (RAL5013), Telegrey (RAL7045), and Rape Yellow (RAL1021) Laodpfx Aez Nhklsb Aoh

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Year of manufacture: 2015 Completely overhauled August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual eroding with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 420 x 300 x 300 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Working tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Original images will follow. Lodpfszwcfhjx Ab Asah 08/28.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM Machine – in top technical and visual condition The machine underwent a comprehensive and professional overhaul in our facility and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric survey, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and now presents itself in a very well-maintained visual condition. The generator and control system were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Ledpfxjyzw I Ij Ab Ajah Finally, the machine underwent an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideal for reliable production operations. Technical data: Ingersoll (OPS Ingersoll) Wire EDM Machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator power 60 Amps, EAGLE Powertec Travel ranges (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up plate changer Work tank (W x D x H): 770 x 670 x 440 mm Work table (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 16.10.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 576308, workpiece weight (max.): 7,500 kg, total height: 3,360 mm, total width: 2,150 mm, total length: 3,600 mm, table length: 1,640 mm, table height: 1,140 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 1,510 mm, feed length Z-axis: 650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, overall weight: 12,640 kg, Equipment: documentation/manual, CNC SINKER EDM MACHINE – OPS-INGERSOLL GANTRY EAGLE 1200 For sale: a large-format, premium-class CNC sinker EDM machine – OPS-Ingersoll Gantry Eagle 1200. Manufactured in Germany, its gantry structure (Mobile Portal) provides the highest geometric stability and micron-level precision when machining heavy molds and dies. MACHINE SPECIFICATIONS • Manufacturer: OPS-Ingersoll Funkenerosion GmbH (Germany) • Model: Gantry Eagle 1200 • Serial number: 576308 • Year of manufacture: 2009 • Conformity mark: CE GEOMETRIC PARAMETERS AND KINEMATICS (Axes) Full 4-axis system, digital AC servo drives: Laedpfx Ajzum Ubjb Ajh • X-axis travel (head): 1000 mm • Y-axis travel (portal): 1510 mm (loading position extended to 1955 mm) • Z-axis travel (slide): 650 mm • Integrated C-axis: 360° rotation, 0.001° resolution, 1–20 rpm speed • Feed rate (X, Y, Z): up to 5,000 mm/min • High-Speed Jump speed: Eagle Power Jump technology up to 18,000 mm/min (18 m/min) WORK TABLE AND MACHINING AREA • Table dimensions: 1140 x 1640 mm • Maximum table load: 7,500 kg (7.5 tons) • Maximum electrode weight: up to 300 kg (manual operation up to 50 kg, automatic operation up to 25 kg) • Work tank: Automatically lifting/lowering tank structure (Lifting container). • Internal tank dimensions: 1270 x 1770 x 680 mm (max. dielectric level: 640 mm) PULSE GENERATOR (Eagle PowerTec) • Technology: Adaptive current control, resistor-less pulse generator. • Pulse shaping: Adaptive waveform (rectangular pulses, modified rectangular pulses, capacitor pulses). • Working current: PT 60 / PT 110 current module (60 A or 110 A depending on the configuration). CONTROL SYSTEM AND HMI COMPUTER • Control model: PC-NC-Dialog (2 x 32 bit), adaptive Eagle PowerTec control with a 17" LCD monitor • HMI unit: Andronic 2060S industrial computer (Intel Celeron M 1.6 GHz, 80 GB hard drive, Soft PLC CoDeSys, InterBus-S). • Operating system: Microsoft Windows® XP® Professional Embedded. • Communication: USB 2.0 ports and Ethernet network interface. • Advanced functions: Orbital erosion, backlash compensation, automatic measuring cycles. • Remote control: PowerTec Handheld with display. AUXILIARY SYSTEMS AND AUTOMATION • Filtration system: Cartridge filters in the base, area approx. 32 m², capacity 2800 liters of dielectric. • Cooling: Compressor unit with a cooling capacity of 7.9 kW. • Lubrication: Automatic centralized axis lubrication. • Safety: Factory-installed fire extinguishing system (16 kg CO₂ cylinder) with automatic monitoring – enables safe unattended operation. LOGISTICAL AND TRANSPORTATION DATA • Transportation dimensions of the machine body (width x depth x height): 2150 x 3600 x 3360 mm • Transportation weight of the machine body: 12,000 kg (12 tons) • Transportation dimensions of the generator: approx. 1800 x 1600 x 2310 mm • Transportation weight of the generator: approx. 640 - 700 kg • Total set weight: approx. 12,640 kg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. Ledjyrqpfepfx Ab Aeah The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: like new (used), Year of construction: 2024, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 574525, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, total length: 3,500 mm, total width: 2,100 mm, table load: 500 kg, Gantry Eagle 400 including MultiChange Light handling system, year of manufacture 2024. Serial No.: 574525 Serial No. handling system: 583328 Total weight approx. 6000 kg including handling system Commissioned: 04/2024 Accessories: MultiChange Light handling system, 70 electrodes and 8 pallets The machine is being sold on behalf of the owner. Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailor-made financing options that are adapted to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. Laodpfx Aez Dazdob Ash We will advise you personally and competently. Subject to prior sale, changes and errors!

Condition: used, Year of construction: 2004, machine/vehicle number: 575259, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, For sale is a high-quality sinker EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideal for precise EDM operations in tool and mold making, and comes equipped with an extensive range of features. 🔍 General Information: Manufacturer: OPS Ingersoll Lasdpjw Ig A Hsfx Ab Ajh Model: Gantry 800 Machine No.: 575259 Year of manufacture: 2004 Origin: Made in Germany Condition: Used, well-maintained, and fully operational ⚙️ Technical Specifications: Travel distances (X/Y/Z): 550 x 850 x 450 mm Worktable size: approx. 800 x 1000 mm Max. head load: 200 kg Max. clearance: 585 mm Max. traversing speed: 12,000 mm/min 💡 Equipment & Features: 30-position tool changer, EROWA Mitsubishi 64-bit CNC control (separate control panel) Programming software: MultiProg Control technology: Multipulse PRO Chuck: ER-016841 Integrated CO₂ fire extinguishing system Cartridge filter unit Dielectric cooling system by Weinreich Industriekühlung Extensive accessories and connection cables available ⚡ Electrical Data (as per type plate): Supply: 400 V / 3~ / 50 Hz Control voltage: 24 V AC / DC Power consumption: 17 A Fusing: 25 A Wiring diagram no.: 107258 Errors, typos and prior sale excepted.

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. Laedpfx Aeuu Rthsb Ash The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis OPS INGERSOLL Eagle V9 was manufactured in 2014. It features a robust double gantry drive, a maximum travel speed of 45 m/min, and a powerful HF-Spindle with speeds up to 18,000 rpm. The machine is equipped with a 48-fold tool changer and supports 5-axis simultaneous machining. If you are looking to get high-quality machining capabilities, consider the OPS INGERSOLL Eagle V9 vertical machining centre we have for sale. Contact us for further details. - Machine Structure: Double gantry drive in X and Y axes, vibration-damping polymer concrete bed with foundation-free 3-point setup- X-Axis Travel: 800 mm- Y-Axis Travel: 600 mm- Z-Axis Travel: 500 mm- B-Axis Travel: 140° / 60°- C-Axis Travel: 360°- B-Axis Speed: 25 rpm- C-Axis Speed: 100 rpm- Max. Rapid Traverse Speed: 45 m/min- Max. Acceleration: 10 m/s²- Spindle 1 (Standard): High-frequency spindle HSK-A63, 35 kW power, 1 to 18,000 rpm, 83 Nm torque- Spindle 1 Tool Changer: HSK-A63, 48-fold- Spindle 2 (Optional Option 5): High-frequency spindle HSK-E50, 17 kW power, 1 to 36,000 rpm- Spindle 2 Tool Changer: HSK-E50, 72-fold- Control System: HEIDENHAIN iTNC 530 HSCi- Table Type: T-slot table (replaced by 4th/5th axis unit if option configured)- 4th/5th Axis Workpiece Capacity: 500 mm diameter x 500 mm height, max weight 250 kg- Precision Package 1: Heat exchanger circuit +/- 0.1°C and drive cooling- Precision Package 2: Position and geometry error compensation X/Y/Z axes- Precision Package 3 (5-Axis Option): ATDC (Automated Temperature Drift Control), 5-axis compensation, Heidenhain KinematicsOpt with calibration sphere- Tool Measurement: Blum laser system for tool breakage control and tool length/diameter compensation- Workpiece Measurement: Infrared touch probe Renishaw- Lubrication: Minimum quantity lubrication (external spindle), automatic central lubrication for spindle, drive, and guide system- Automation / Handling System (Option 13): Handling system IMC5 MultiChange light (Year 2004) mounted on right side, RCS standard gripper, 8-fold workpiece magazine- Electrode Magazine (Option 14): Double electrode magazine Erowa ITS (154-fold)- Additional Features:chip boxautomatic cutter cleaning with spray agentHR410 handwheel Laodez Ngbpepfx Ab Aeh Technical Specification Taper Size HSK 63

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Fully Refurbished – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005, which is undergoing a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good condition, both technically and aesthetically, and will be prepared for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Fully Refurbished Completion: Expected 10/2026 Lasdpjz Atdrefx Ab Ash Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Working Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 is undergoing a comprehensive and professional overhaul in our facility. During the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally refurbished or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire working tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul ## Quality Control and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality control. This includes, in particular, a detailed erosion test according to the quality and testing specifications of OPS INGERSOLL. The relevant machine functions, as well as accuracy and process reliability, will be checked. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit is immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large working area, the machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively refurbished wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability. 10/16.

Year of construction: 2008, condition: ready for operation (used), A CNC high-speed machining center OPS Ingersoll in gantry design is available. Materials: graphite/copper/aluminum/plastics/hard machining, travel X/Y/Z: 700mm/550mm/450mm, table dimensions X/Y: 850mm/700mm, max. workpiece weight: 2000kg, tool holder to table distance range: 20mm-520mm, tool holder: HSK-E40, spindle: Fischer mW 9/10-4, speed: 42000rpm, spindle power: 17kW, spindle runout accuracy: µm, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2500mm/2700mm, weight: approx. 9000kg, control: Andronic 2060. Documentation available. An on-site inspection is possible. Lajdpszh Nhwofx Ab Ajh

Year of construction: 2003, condition: good (used), EDM machine Machine type: OPS Ingersoll Gantry 5000 Year: 2003 SPECIFICATIONS Travel Lsdpjzi Sfusfx Ab Aeah

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. Ledpevwa Nbsfx Ab Asah The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 2,000 kg, total height: 2,300 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 700 mm, table length: 850 mm, table load: 2,000 kg, overall weight: 7,700 kg, spindle speed (min.): 3,000 rpm, spindle speed (max.): 40,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL OPS 650 CNC machining center - Table T-slot quantity: 5 - T-slot dimensions: 18H12 - Distance HSK tool holder - table: 550 mm Lasdpfjy Tu Ddjx Ab Ash - Main spindle tool holder: HSK-E 40 - Positioning accuracy TP according to DIN ISO 230-2: 0.005 mm - Repeatability: 0.002 mm - For further technical data, see the photographed data sheet - Including technical documentation - Including workbench and accessories such as HSK-E 40 tool holders, equipped with tools - Workbench dimensions: approx. 1500 x 900 x 1100 mm Attention: The item must be collected between July 21 and July 23, 2026, on a date to be determined. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK32 - Spindle power : 17 [kW] - Spindle speeds : 30-42000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 550/400/400 [mm] - Rapid traverses rates (X/Y/Z) : 30 [m/min] A ROTARY AXIS Laedpjuhbtkjfx Ab Aoh - Travel : 120 [°] (+/-) - Indexing precision : 0.0001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 32 TABLE - Table dimensions : 450 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1900X2580 [mm] - Machine height : 2260 [mm] - Machine weight : 7200 [kg] MACHINE HOURS - Number of hours under power : 12558 [h] - Number of working hours : 6602 [h] EQUIPMENT - CNC : INGERSOLL ANDRONIC - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - 3 colors status lamp - Micro-lubrification coolant - Spindle cooling unit - Tool probe : BLUM

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. Laodpfx Ajzxckmsb Aeh EQUIPMENT Documentation CE marking