Used Odes Workcross 650 for sale (3,531)

Condition: new, Year of construction: 2025, 3-seater - Engine: 2 cylinders, 4-stroke, water-cooled, displacement: 650 cc, power: 35 kW (47.6 hp) and more. Cedpfx Aisv I Uaielerd

Condition: good (used), The scope of delivery includes: 1x partition panel, used Material color: gray-white Overall length: approx. 775 mm Tube length: 650 mm + 5 mm plastic cap Cross-section: square tube 20 x 20 mm Opening dimension: approx. 103 mm Weight: 0.93 kg | per piece Cjdpfxei Eu Dve Ailsrd

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm Crjdpfszadr Nox Ailed - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Csdpfxekn Rz Hs Ailerd Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: used, Manufacturer: HERAEUS Model: RL 250 Internal dimensions: Diameter: 315 mm Credey Nlcvepfx Ailjd Depth: 450 mm

Condition: new, 🧰 Product Features • Condition: new • Color: gray • Volume: 650 l • Load capacity: 4000 kg (at 5°C room temperature) • Weight: 43 kg • Length: 120 cm • Width: 100 cm • Height: 78 cm • Stackable: Yes • Dimensionally stable: Yes • Special features: suitable for racking, liquid-tight, drain valve possible 💰 Price €155.00 net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment We continuously stock over 5,000 linear meters of pallet racking from numerous manufacturers. Cjdpfshvrk Tjx Ailsrd (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our general terms and conditions, all prices exclude VAT, ex warehouse.)

Condition: good (used), Year of construction: 2000, functionality: fully functional, Model Year: 2000 Width: 700 Length: 400 Height: 500 Number of Axes: 5 Holder: BBT40 Spindle Speed (RPM): 20,000 Cjdpfx Aox T Dipeiljrd Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2000, functionality: fully functional, Model Year: 2000 Width: 700 Length: 400 Height: 500 Crodpfx Aox Uphmsiled Number of Axes: 5 Holder: BBT40 Spindle Speed (RPM): 20,000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 2,200 mm, plate width: 3,800 mm, table length: 3,800 mm, table width: 2,200 mm, TECHNICAL DETAILS Maximum plate width: 3,800 mm Maximum plate length: 2,200 mm Main saw cutting depth: 123 mm Number of grippers: 7 Crjdpszf H Nmjfx Ailjd Maximum feed rate: 140 m/min MACHINE DETAILS Main saw motor power: 18.5 kW Scoring unit motor power: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding stop The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Pressure blower: Radial fan pressure blower Codsziz Avepfx Ailord -Type: Ø 420 mm -Motor: EMK 2.2 kW / 2915 rpm -Volume flow rate: m³/min -Inlet connection: Ø 150 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 420 x 40 mm -Dimensions: 650/560/H760 mm -Weight: 103 kg

Condition: used, Year of construction: 1998, material width 100 - 450 mm Crjdpfx Aovuugieiljd material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Cjdpfx Ajzii Dzoilord Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 230 V, working width: 650 mm, temperature: 140 °C, VIVID Matrix DUO MD-650 Working width 650 mm Csdpfxszia Aze Ailord Double-sided laminator Adjustable speed Adjustable temperature

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm work piece dimensions: work piece lenght 200 – 1500 mm work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm The machine is supplied with the following components: Crsdodcdwbepfx Ailod - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: used, Year of construction: 2025, Book stacker Müller Martini BLSD 650 (A501.1000) Codjyr E Dkepfx Ailord Year: 2025 Description: - Compensating stacker - Turning device: 90 & 180 degrees - Roller table delivery Max. mechanical speed: up to 65 cycles/min Maximum size range: 390 x 285 x 90 mm Minimum size range: 115 x 100 x 5 mm Maximum pile height: 340 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Codoy Uffhspfx Ailjrd Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: good (used), Year of construction: 2011, Vertical machining center Machine type: Avia VMX 650 Control: Heidenhain iTNC 530 Year: 2011 SPECIFICATIONS Travel X-Axis: 650 mm Y-Axis: 540 mm Z-Axis: 620 mm Rapid motion: (X/Y/Z): 25 m/min. Max. revolution: 10.000 rpm Tool: ISO 40 Cjdpjzi Dz Uofx Ailerd Tool capacity: 24 Table size: 800 x 540 mm Max. workpiece weight: 700 kg Equipment Chip conveyor Electronical handwheel

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, therefore, very few spindle hours! - Pallet dimensions: approx. 320 x 320 mm - The pallets are clamped onto the rotary table. - Tool holder: HSK-E 40 - For further technical data, see the images. - Includes technical documentation. - Includes HSK-E 40 tool holders and three pallets. Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. FCA D-80339 Munich - loaded onto a truck. Cjdpfxjy Tvcuj Ailord

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 2,000 kg, total height: 2,300 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 700 mm, table length: 850 mm, table load: 2,000 kg, overall weight: 7,700 kg, spindle speed (min.): 3,000 rpm, spindle speed (max.): 40,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL OPS 650 CNC machining center - Table T-slot quantity: 5 - T-slot dimensions: 18H12 - Distance HSK tool holder – table: 550 mm - Main spindle tool holder: HSK-E 40 - Positioning accuracy TP according to DIN ISO 230-2: 0.005 mm - Repeatability: 0.002 mm - For further technical data, see the photographed data sheet. - With technical documentation - With workbench and accessories, including HSK-E 40 tool holders, equipped with tools - Workbench dimensions: approx. 1500 x 900 x 1100 mm Note: The item must be picked up between July 21st and 23rd, 2026, on a date to be confirmed. FCA D-80339 Munich - loaded onto a truck. Crodpjy Tu Ddsfx Ailsd

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Crodpfx Aszi A Sxeilsd Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Credpfxeyw Aa Uo Ailod Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: used, functionality: fully functional, conveyor belt length: 3,870 mm, conveyor belt width: 650 mm, conveyor belt speed: 75 mm/s, total length: 3,870 mm, total width: 840 mm, total height: 300 mm, overall weight: 200 kg, power: 0.75 kW (1.02 HP), Equipment: type plate available, Manufacturer: COMBI-STAUFNER-TECHNIK Year of manufacture: 1998 Overall dimensions (L x W x H) in mm: 3,870 x 840 x 300 Width including side frame in mm: 720 Width including drive unit in mm: 840 Side wall height in mm: 100 Conveyor length in mm: 3,860 Crodpfx Aiezipqusled Conveyor width in mm: 650 Belt type: PVC, smooth Belt width in mm: 650 Support structure: none (available as an option) Running surface: Steel Drive: Head drive Motor type: Geared motor Motor specifications: Lenze, 0.75 kW, 50/60 Hz Motor position: On the left in the direction of conveyance Conveying speed in m/s: 0.75 Net weight in kg: 200 Condition: second-hand / fully functional Functional test: OK

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Technical data Clamping unit Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plastication rate: 77 g/s Nozzle clamping force: 150 kN Drive and power supply Cedpsywrtwofx Ailjrd Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle

Condition: used, all stainless steel Crodpjzg U Duefx Ailsd electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: used, Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBT-2E 650/3 Overall dimensions: 2260 x 1870 x 1450 mm Year: 2002 Weight: 1160 kg Codpfxjy R Eclo Ailjrd Electrical data: 400 V; 5.5 kW d: 840 mm D: 1360 mm Torus Ø: 430 mm The surface of the Pu lining is damaged and in a repaired condition. Recorded in pictures.