Used Odenberg Alpha for sale (244)

Condition: excellent (used), functionality: fully functional, Odenberg Alpha Potato Grading Machine with Screen Pgjdjyku Sujpfx Angsu

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Pgodpfxez Eu Syj Angju Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Includes special equipment: Tilting-swiveling objective, LED-UW Ergonomic wedge, 5-25 degrees Aluminum light case Pgodpfx Aezyzwnengou Camera set ALFT-HDMI Optional, if required: Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 New price: €130,000.00

Condition: like new (used), Year of construction: 2021, operating hours: 3,006 h, functionality: fully functional, machine/vehicle number: 00161215-02.18, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 910 kg, type of cooling: water, electrical fuse: 16 A, laser power: 900 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, travel distance X-axis: 320 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 370 mm, Equipment: head guard, We are selling a laser welding machine in excellent condition. Pjdpfx Aezw Eu Sjngjgu

Condition: ready for operation (used), Alpha SPG 75-MF1-7 gearbox SN: 203771 - 6000 rpm, used, in good condition, fully functional, delivery scope as per photos. Pgodpfxoy Nn Hkj Angeu

Condition: ready for operation (used), Alpha SPG 060-MF1-7-00/060S02 gearbox 20009454, serial number: 1159634, used, in good overall condition, 100% functional, scope of delivery as per photos. Pgedsx Dtxfopfx Angeu

Year of construction: 2021, condition: excellent (used), Latest model Tomra Odenberg Halo III optical grader. Perfect for sorting greens, misshapes, mechanical damage, surface blemishes and size outliers. Very low running hours, only used for a short time and then put in to dry storage. Rare opportunity - find another one as new as this. Pgodpfx Asxvt Htengeu

Year of construction: 2019, operating hours: 380 h, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm • Operating mode: Pulsed • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms • Pulse frequency: Single pulse up to 100 Hz • Welding spot diameter: 0.2–2.0 mm • Focusing objective: 150 mm (further lenses per lens data sheet) • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm • Lowest working point: 530 mm Pgodpfxjzf A Ifs Angju • Highest working point: 1590 mm • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition

Condition: excellent (used), functionality: fully functional, Odenberg / Tomra Potato Sorting Line Pedpfxeykmf Hs Angegu Optical sorter manufacturer: Odenberg Control system: Tomra (touch panel) Total operational area: 10,500 × 4,750 mm The line includes: - Odenberg optical sorter with a mechanical finger ejection system - Tomra touch control panel - Steel hopper with side/top infeed - Inclined feeding belt conveyor - Elevated feed conveyor - 2 underwater conveyor belts - Cross infeed section with vibrating screen - Discharge belt conveyors - Operator platforms with slatted flooring A complete potato sorting line designed for industrial sorting of raw material using optical technology. The Odenberg sorter, combined with the Tomra control system, enables precise product selection based on quality, color and potential defects. The mechanical finger ejection system ensures efficient and rapid separation of unwanted elements from the main product. The line is equipped with a complete system for feeding, conveying, and discharging potatoes, including underwater conveyor belts and a vibrating screen section for initial separation.

Condition: excellent (used), functionality: fully functional, Odenberg / Tomra Potato Sorting Line Brand: Odenberg / Tomra Control System: “Tomra” Touchscreen Panel Technical Specification: - Optical Sorter: Odenberg with mechanical finger ejection system Pgodpfeyku I Nsx Angeu - Infeed Hopper: steel construction, with side and top inlets - Conveying System: rising inclined conveyor belt, overhead feed conveyor belt - Water Section: 2 submersed conveyor belts - Feeding Section: cross-flow feed with vibrating grate and conveyor belt - Installation footprint: Total usable floor area: 10,500 x 4,750 mm Set includes platforms with slatted flooring An advanced potato sorting line based on Odenberg and Tomra optical technology, providing a complete solution for modern processing facilities. At the heart of the system is a precision optical sorter with mechanical ejection, operated by the intuitive Tomra interface, enabling rapid product selection by quality and size. A unique feature of the line are the two underwater conveyor belts, ensuring extremely gentle handling of the produce and minimizing bruising and mechanical damage.

Condition: as good as new (ex-display), Year of construction: 2019, We have this machine since 2019, we worked just a few months. Machine with automatic bags dispenser, can put 3 labels by one pass (2 labels first side, 1 label another side). Voltage 220V/1PH 50/60HZ Total power 3.7KW Max. current 17A Label height 10-120mm Label length 15-350mm Paper roller inner diameter 76mm Paper roller outer diameter Within 360mm Labeling objects diameter 15-150mm Labeling objects length 20-250mm Labeling speed 12-35M/min Conveyor belt speed 0-35M/min If you have an questions on this, please do not hesitate to contact us. Pgsdpei Dxupofx Angou

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20044G, total length: 5,000 mm, total height: 2,100 mm, total width: 1,500 mm, input voltage: 220 V, power: 4 kW (5.44 HP), For sale is a used sleeve labeling machine, including a shrink tunnel and conveyor belt, taken from an industrial packaging line. The system was used for the automatic application of shrink sleeve labels to bottles, cans, and other containers and is particularly suitable for applications in the beverage, food, and packaging industries. The machine features a robust, industrial-grade design with a stainless steel housing and can be integrated into existing packaging and filling lines. Condition: The system is used and has been partially refurbished. It was last in working order. However, due to its used condition, the sale is made without any warranty regarding completeness, current control function, or suitability for a specific application. An inspection and technical assessment before purchase are recommended. Scope of delivery: Pjdpexvbz Eofx Angegu Sleeve labeling machine Shrink tunnel Conveyor belt Existing attachments and components as per inspection Individual sale possible: If interested, individual machine components or assemblies can also be purchased separately. Inspection possible by appointment. Further technical information, images, and dimensions are available upon request.

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition. Swinging diameter over the bed: 500 mm Distance between centers: 780 mm X-axis travel: 200 mm Y-axis travel: 80 mm Control system: Siemens 840 Total operating hours: 26,501 h Max. turning length: 500 mm Maximum turning diameter: 200 mm Psdpfx Aj Abxwfongegu Turning diameter over the bed (max): 500 mm Distance between centers: 780 mm Maximum spindle speed: 6000 rpm Workpiece weight: 45 kg Weight: 4500 kg Filtration system Includes a CNC Spacesaver SS 2500 bar feeder (2018) Inspection in operation is possible by prior arrangement.

Condition: good (used), functionality: fully functional, Year of construction: 2006, AMADA LC-2415 ALPHA IV NT 2.5 kW Specification Details Manufacturer: AMADA Model: LC-2415 ALPHA IV NT Year of Manufacture: 2006 Condition: Used Machine Type: CNC CO₂ Laser Cutting Machine Laser Power: 2.5 kW Laser Type: CO₂ laser Laser Oscillator: FANUC AF2000i-C / AF2000E-LU2.5 CNC Control: AMNC-F / FANUC Total Operating Hours: 25,729 h Working Range – X Axis: 2,520 mm Working Range – Y Axis: 1,550 mm Working Range – Z Axis: 300 mm Maximum Processing Dimensions: 5,040 × 1,550 mm with one repositioning Maximum Table Load: 330 kg Maximum Cutting Speed: 20 m/min Maximum Positioning Speed – X/Y: 80 m/min Maximum Positioning Speed – Z: 60 m/min Positioning Accuracy: ±0.01 mm / 500 mm Repeat Positioning Accuracy: ±0.005 mm Maximum Sheet Thickness – Mild Steel: Up to 12 mm* Maximum Sheet Thickness – Stainless Steel: Up to 6 mm* Maximum Sheet Thickness – Aluminium: Up to 6 mm* Drive System: AC servo motors Number of Controlled Axes: 3 (X, Y, Z) Laser Wavelength: 10.6 μm Laser Beam Mode: TEM₀₀ equivalent Beam Divergence: < 2 mrad Laser Stability: ±1% Cutting Speed: 0–20 m/min Assist Gas Connections: 3 Automatic Gas Pressure Control: Yes Automatic Focus Adjustment: Yes Automatic Sheet Repositioning: Yes Automatic Sheet Loading/Unloading: Depending on configuration Cutting Head: HS-2003 Adaptive Optics: ActiveCut High-Pressure Cutting System: CleanCut Specification Details Aluminium Cutting System: ALUCUT Extraction System: Included / depending on configuration Cooling Unit: Included Power Supply: 400 V / 50 Hz / 3-phase Compressed Air Requirement: Approx. 250 l/min at 6 bar Machine Length: 5,745 mm Pjdpfo Abrlpex Angogu Machine Width: 2,630 mm Machine Height: Approx. 2,150–2,275 mm* Machine Weight: Approx. 7,500 kg Laser Class: Class 1 during intended operation * - The actual maximum sheet thickness that can be processed depends on the material, its quality and processing conditions.

Condition: used, MDR 2000 Moving Die Rheometer • Closed, bic conical chamber system • Fast microprocessor for temperature control • Torque measurement via friction-free torque transducer • High precision, high efficiency • Automation option for maximum productivity Pjdpfxozul Dbe Angsgu State-of-the-art vulcanization technology The MDR 2000 Moving Die Rheometer from Alpha Technologies has become the global standard for vulcanization technology. Two directly heated, bic conical tool halves with low mass provide fast and accurate temperature recovery. The oscillating lower tool half eliminates the need for a rotor, as in the Oscillating Disk Rheometer (ODR 2000). This results in faster temperature recovery and greater data accuracy. The resulting torque is measured by a torque transducer in the upper tool half, ensuring that friction forces from bearings and seals no longer affect the torque measurement. The torque signal is calibrated using a torsion spring rod with known values. This ensures long-term accuracy, repeatability, and reproducibility of the data. The unique closed chamber system enables above-average reproducibility and sensitivity to variations in the compound. Fast-responding temperature control is ensured by an optimized system. These properties, combined with a highly sensitive torque transducer and state-of-the-art microprocessor technology, offer the best in networking technology.

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Pedpfx Aex Ectusngogu

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Pjdpfxsyfl U Ns Angogu

Year of construction: 2021, condition: ready for operation (used), Weighing heads: 10, max. weighing capacity: 6500g, individual weighing capacity: 10g-800g, scale volume: 1600ml, max. capacity: 70/min, number of programs: 100, dimensions X/Y/Z: approx. 1100mm/1100mm/1350mm, weight: approx. 330kg. The multihead weigher is sold as a complete system including accessories, peripherals and spare parts. Documentation available. Pgjdpfx Aet Rkaaengsu

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 21, Equipment: chip conveyor, FANUC ROBODRILL Alpha D21LiA5 with 4 axes Fanuc 31i control 4-axis – 360 degrees X-700mm Y-400mm Z-330mm 21-tool magazine for BT30 Pgjdpoz R Sdmofx Angou max 10,000 rpm Through-spindle coolant (IKZ) Renishaw workpiece probe Renishaw tool probe Chip conveyor with pumps Very good condition, 6400 operating hours

Condition: good (used), Year of construction: 2012, functionality: fully functional, Center distance (mm) 450 Turning diameter (mm) 500 Turning length (mm) 300 Turning diameter (mm) 200 Bar passage (mm) 52 Spindle speed (rpm) 6000 Spindle power (kW) 15-20 Travel in X-axis (mm) 190 Travel in Z-axis (mm) 335 Rapid traverse rate (m/min) 30 Tool positions 12 Pgsdpfx Anez At Absgou Tool holder VDI30 Number of turrets 1 Number of driven tools 12 Weight (kg) 3800 Dimensions (L×W×H) (mm) 4260 x 1710 x 1820 Spindle hours (h) 20000 Manufacturer DMG Year of manufacture 2012 Control system Siemens 840D sl with ShopTurn

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Technical data: - Clamping force: 2,200 kN (220 t) - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm - Platen size: 900 × 900 mm - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar - Locating ring: Ø 160 mm - Fully electric drive Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request. Pgedpfx Asznd Dyjngsu

Condition: good (used), Year of construction: 2014, Approx. 11 units of compact label dispensers for applying pre-printed labels, Weber, Alpha Compact – used: Price per unit, ex-works: now only €950.00 instead of €2,950.00 (net)! Pedpfx Aoz Sdq Uongjgu Manufacturer: Weber Type: Alpha Compact Year of manufacture: 2014 Includes stand and applicator 100 – 240VAC Condition: good Available: from approx. Q4/2026 Location: Warehouse Frankenberg / Saxony

Condition: used, Year of construction: 2015, turning diameter max. 240 mm turning length 470 mm control 840 D sl Operate 4.8 Celos greates pass round over bed 500 mm swing diameter over slide rest 290 mm Pgodpfez S Nyajx Angeu centre distance 780 mm turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 13 / 14 kW max. Torque 171,5 / 192 Nm inner draw tube diameter 52 mm C-Axis 0,001 ° spindle diameter in front bearing 100 mm spindle nose FL 140H5 Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 12,6 / 16,2 kW max. Torque 48 / 62 Nm inner draw tube diameter 37 mm C-Axis 0,001 ° spindle diameter in front bearing 90 mm spindle nose FL 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. tool taper VDI 30 Spindle speed - driven tool stations max. 5.000 min -1 power capacity - driven tool-stations 4,18 kW max. Torque 16 / 20 Nm y-axis 80 (+/- 40) mm x-axis 145 mm y-axis 80 (+/- 40) mm z-axis 520 mm z2-Axis 550 mm rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min Feed force ( X / Y / Z ) 4,5 / 4,5 / 7,5 kN total power requirement 30 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 7,0 x 3,0 x 2,2 m CNC - Turning- and MillingCenter DMG GILDEMEISTER - CTX alpha 500 V6 - Only approx. 11,139 spindle hours - External chuck flushing system for the main spindle - External chuck flushing system for the counter-spindle Coolant supply through the counter-spindle - Coolant spray gun - Bar machining package Workpiece unloading device with conveyor belt (left-hand side) for parts up to 51 mm in diameter and 185 mm in length, max. 3 kg Hydraulic hollow clamping system Draw tube inner diameter: max. 52 mm 4-color signal light Connection for bar feeder or bar loading magazine - Preparation for external handling Electrical robot interface (Profibus) Automatic work area door Chuck flushing system with coolant (main spindle)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 520 mm, turning length: 3,000 mm, turning diameter: 800 mm, spindle bore: 170 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 15 rpm, spindle motor power: 26 W, rotational speed (min.): 15 rpm, rotational speed (max.): 1,000 rpm, Harrison Alpha CNC/Manual Lathe Model: 1800 XS Capacity: 800 x 3000mm Control: GE Fanuc Alpha x Series Year: 2008 Distance Between Centres: 3000mm Swing Over Bed: 800mm Swing Over Top Slide: 520mm Swing In Gap: 870 x 340mm Spindle Speeds: 15-1000 RPM (2 Ranges) Spindle Bore: 170mm Main Motor: 26 KW Machine With: 400mm 3 Jaw Chuck Pgjdpfoz S Nfvsx Angsu Fixed Roller Steady Photographs taken on site prior to cleaning and servicing

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, product height (max.): 100 mm, space requirement height: 1,750 mm, space requirement length: 1,200 mm, input frequency: 50 Hz, workpiece weight (max.): 300 kg, Equipment: type plate available, Alpha Brush KS-WBM Sanding Machine, Texture Brushing Machine This machine gives surfaces, such as profile boards for facades or wall cladding, a noticeably more sophisticated and rustic look! With up to 400 mm working width and customizable configuration for both softwoods and hardwoods, this machine is a versatile tool for carpentry workshops, planing mills, or joineries. We offer not only the texture brushing machine itself, but also the appropriate extraction unit and a variety of brush heads to equip the machine, allowing you to achieve your desired effect on wooden surfaces. Psdpew Avrhofx Angegu In addition to this sanding automaton, we also supply coating machines that allow you to stain or finish boards and panels in one step. Do you have questions? We are happy to advise you individually on your requirements.