Used Nn 200 Liter for sale (22,401)

Condition: new, Year of construction: 2026, 200L cutter trolley, all stainless steel Bedpfoyzrwqex Amyolk New item Fixed price: 330 euros each Currently 4 units in stock Subject to prior sale Sold without guarantee, no returns

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting Bjdpfx Amowc Rk Eoyolk No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Bljdpfoziiz Hsx Amysk Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Condition: excellent (used), Espec Type: TSA-202E-W Temperature shock chamber, water-cooled Cold chamber: -55°C to 0°C Hot chamber: +50°C to 200°C System: Two-zone testing via damper control Temperature fluctuation: ±0.5°C Hot chamber: Temperature: Heating time: from ambient temperature (20°C) to +200°C within 15 minutes. Cold chamber: Temperature: Cooling time: from ambient temperature (20°C) to -55°C within 35 minutes. Temperature: Recovery time: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Refrigerant: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Bledpfxjzh Htkj Amyok Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel -Barrel support: 2 metal rollers Ø60 x 400 mm -Wheel equipment: 2 castors, 2 wheels Bljdelw Az Ujpfx Amysk -Bracket: for drip tray -Dimension: 990/610/H680 mm -Weight: 20 kg

Condition: used, Barrel rack, barrel support, barrel pallet, barrel trolley, barrel tipper -Keg rack: keg pallet for 200 liter kegs Bedpfxolyvc Us Amyelk -Recording: can be transported with a forklift, see photos -Number: 2x frame available -Price per piece -Dimension: 1300/800/H275 mm -Weight: 25 kg/pc.

Condition: used, Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center -Number: 9x containers with 200 liter cleaning fluid -Price: complete Bledpfx Amjdtm Uksyjk -packed on: EURO pallet -Weight: 252 kg

Condition: excellent (used), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: Width 1540 mm x Height 2090 mm x Depth 1240 mm Fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test chamber: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Viewing window, heated: Width 500 mm x Height 600 mm Installation dimensions of the temperature test chamber with doors open Width 2340 mm x Height 2090 mm x Depth 2165 mm Feed-through opening, 2 pieces on the side wall, left: Ø 100 mm Temperature range -70°C to +180°C Heating: 3.0 K / min Blsdpfx Ajzgah Ssmyjk Cooling: 3.0 K / min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Bsdpfozf Ibkox Amyelk Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Bsdpezf Hi Hsfx Amyolk Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: like new (used), Pneumatic meat bin lift Lift is designed for loading the product placed in 200 l meat bins (type U-200) Material: Stainless Steel Model: 200 liter Unloading height: 1.240 mm Blodpfx Asinup Domysk Capacity: 200 liter or 300 liter Dimensions (LxWxH): 1.800x900x1.930 mm Weight: 250 kg.

Condition: good (used), The scope of delivery includes: 1x U-shaped corner guard, used Material color: orange Overall height: approx. 350 mm Overall width: approx. 200 mm Internal width: approx. 160 mm Overall depth: approx. 360 mm Internal depth: approx. 240 mm Leg dimension: approx. 140 x 140 mm Base plate dimension: approx. 340 x 200 x 8 mm Bljdpfxek T Au Eo Amyek Material thickness: approx. 6.00 mm Bore hole diameter: approx. 16 mm Number of bore holes: 04 pcs. Weight / piece: approx. 14.850 kg General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2006, Viessmann Vitorond 200 Output: 160 kW Burner: Weishaupt oil or gas burner available upon request Viewing by prior telephone arrangement only! Preferred sale to dealers, tradespeople, or for export. Bsdpfomnqc Hsx Amyjlk All information is provided without guarantee; errors and prior sale excepted. The seller accepts no liability for typing or data transmission errors. We will, of course, handle all formalities Loading possible

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Output: 311Kw Мы говорим по русски! Viewing please only by telephone arrangement! Bodpfotu Trusx Amyolk Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information Bledpfxjtu T I Us Amysk

Condition: used, Year of construction: 2009, Technical details: Bjdpjzq S Dyofx Amyolk turning diameter: 380 mm turning length: 538 mm total power requirement: 26 kW weight of the machine ca.: 5,2 t

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, spindle motor power: 22,000 W, total height: 1,840 mm, total width: 1,780 mm, overall weight: 5,000 kg, controller manufacturer: MAZATROL, controller model: 640T Nexus, product length (max.): 2,353 mm, number of axes: 4, This 4-axis Mazak QUICK TURN NEXUS 200 MS was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN NEXUS 200 MS machine we have for sale. Contact us for further details. - Work Area:- Max. Swing Diameter: 675 mm- Max. Swing Diameter over Cross Slide: 276 mm- Max. Turning Diameter: 380 mm- Max. Bar Work Capacity: 65 mm- Main Spindle:- Main Drive Power (30 min rating / 100% continuous): 26 kW / 22 kW (Integrated Spindle Motor)- Max. Torque: 350 Nm- Spindle Nose: A2-6"- Spindle Bore: 76 mm- Chuck Diameter: 210 mm- Second Spindle (Sub-spindle):- Drive Power (30 min rating / 100% continuous): 10 kW / 7.5 kW- Max. Torque: 75 Nm- Speed Range: 35 - 6,000 rpm- Indexing: 0.001°- Chuck Diameter: 169 mm- Tool Turret:- Tool Positions: 12- Tool Mounting Type: VDI-like- Turning Tool Shank Height: 25x25x150 mm- U-Drill Diameter: 20 mm- Boring Bar Shank Diameter: 40 mm- Indexing Time: Approx. 0.2 s (1 step)- Driven Tools (Live Tooling):- Drive Power (10 min rating): 5.5 kW- Speed Range: 25 - 4,500 rpm- Max. Torque: 35 Nm- Travel Ranges & Speeds:- X-Axis Travel: 230 mm- Z-Axis Travel: 575 mm- Rapid Traverse Rate X-Axis: 30 m/min- Rapid Traverse Rate Z-Axis: 33 m/min- Tool Setting / Monitoring:- Automatic Tool Breakage Recognition- Automatic Tool Wear Compensation Adjustment Range: 9,999 mm- Tool Presetter: Tool Eye- Coolant & Pneumatics:- Coolant Tank Capacity: 160 l- Pneumatic Pressure: 5 bar, 100 l/min- Machine Dimensions & Weight:- Connected Load: 46.2 kVA- Operating Voltage: 400 V / 50 Hz- Required Floor Space: 1.740 x 1.780 mm (Base layout space)- Transport Dimensions (QTN 200 M - U 500): 2,353 mm (L) x 1,780 mm (B) x 1,840 mm (H)- Machine Weight: Approx. 4,900 kg - 5,100 kgincluded: LNS QUICK LOAD SERVO 3 (2004)- Type: Automatic Short Bar Loader- Bar Diameter Range: 6 mm to 120 mm- Bar Length Range: 100 mm to 1600 mm Technical Specification Counter Spindle Yes Blodszqz D Nspfx Amyek Driven Tools Yes

Condition: excellent (used), Year of construction: 2013, MAZAK QUICK TURN NEXUS 200-II MS Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm The machine is equipped with: - CNC control: Mazatrol Matrix 2 - Hydraulic chuck Kitagawa 200 mm - Hydraulic chuck Kitagawa 160 mm for sub-spindle - Tool Eye - C-axis - C-axis sub-spindle, input accuracy 0.0001° Bljdpfxozpwy Ro Amysk - Interface for bar loader magazine - Automatic parts catcher - Parts removal device - Chip conveyor - Bar loader magazine Breuninng Irco - 8 pcs. fixed tool holders - 4 pcs. driven tool holders

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, MAZAK QUICK TURN NEXUS 200-II MSY Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control system Mazatrol Matrix 2 - Hydraulic HAINBUCH chuck, combination type, size 65 for main spindle - Hydraulic HAINBUCH chuck, combination type, size 65 for counter spindle - Tool Eye - C-axis - C-axis counter spindle, input accuracy 0.0001° Blodpfszczd Uex Amyok - Y-axis - Interface for bar feeder - Automatic parts catcher - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: ready for operation (used), Rexroth MSK100B-0200-NN-M1-AG2-NNNN, 3-phase permanent magnet motor, serial number as per photo, mounting hole spacing: 151 x 151 mm, drive shaft diameter: 32 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Bedpfx Amoi D Nqqsyelk

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar holder, quick-change turning tool post, double tool post, double turning tool post, double tool post, double quick-change tool post, 4-way turning tool post, quadruple tool post, 4-way quick-change tool post -Quick-change tool holder: 4-way quick-change boring bar holder Blodjwvpvgspfx Amysk -Recording dimensions: see photos -Clamping height: 59/34 mm -Clamping length: 200 mm -Dimensions: 330/200/H285 mm -Weight: 30.3 kg.

Condition: good (used), bench vice, metalworker's vice, parallel vice Bledpeddfh Esfx Amyek -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice Bsdpfx Amjhinyvjyelk -Machine vice: rotatable -Clamping jaws 200 x 55 mm -Clamping depth: 200 mm -Dimensions: 510/228/H190 mm -Weight: 64 kg

Condition: used, Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm Blsdpfx Amjc Ih Tisyok -Weight: 35 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,794 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, overall weight: 4,380 kg, controller manufacturer: MAZATROL, controller model: Matrix NEXUS, number of axes: 2, Horizontal turning machine manufactured in 2007. This Mazak QUICK TURN NEXUS 200-II features a maximum turning diameter of Ø 350 mm and a turning length of 550 mm. It is equipped with a chuck size of 200 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN NEXUS 200-II machine we have for sale. Contact us for further details. • Control: Mazatrol Matrix NEXUS • Chuck Size: 200 mm (8") • Maximum Turning Diameter: Ø 350 mm Bsdpfjzg Dz Aex Amyolk • Maximum Turning Length: 550 mm • Machine Weight: 4,380 kg • Tool Eye (Tool Setter): Yes • Coolant System: Currently not functional (coolant/water cannot be added) • Additional optional Accessories: Chip Conveyor, various clamping jaws included • Machine On Hours: 24,079 h • Spindle Hours: 8,794 h Technical Specification Counter Spindle Yes Driven Tools No