Used Mycom N 6L Hs for sale (53,458)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Model N 6L HS, 6 cylinder reciprocating Amonia compressor with 90KW motor/1450rpm with oil separator OSF-250 Cap.= 265 KW at -10C°/+35C° Swept Volume= 326m3/h Ljdpsxawzcsfx Albeah

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Lasdpfxozl A Rae Alboh Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, Ledpfx Aszudabolbjah oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1407, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine (re-controlled 2014) Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Previously in professional denim-finishing production (MASI "Pesumasin No 3") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional rigging required (heavy industrial machine, ~10 t). Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line). Ledpfx Ajzmt S Dslbjah

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1406, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) Lasdpfjzmvgwsx Alboh • Video recorded 19.3.2026 • Previously in professional denim-finishing production (MASI "Pesumasin No 2") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: used, Year of construction: 2019, functionality: fully functional, color: other, Wood shredder in good condition. Immediately ready for use. Lasdpfez R I S Hex Alboh The shredder was purchased from a bankruptcy estate and is now available for resale. Approximate dimensions: 110/240/285 cm, year of manufacture 2019.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection Lsdez Ady Djpfx Alboah The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: excellent (used), Year of construction: 2019, Doppstadt HS 800 Star Screen with Hooklift System Manufacturer: Doppstadt Model: HS 800 Star Screen with Hooklift System Year of Manufacture: 2019 For sale is a Doppstadt HS 800 star screen with a hooklift system, manufactured in 2019. Equipment: 2-fraction version Central lubrication system Hooklift system Operating weight: approx. 9,000 kg Additional interchangeable star screen kit, year of manufacture 2020 The machine is in good and operational condition. Thanks to the additional star screen kit, the machine can be flexibly adapted to different material requirements. Ideally suited for the processing of compost, biomass, wood, green cuttings, and other bulk materials. Ljdpjzdbp Tefx Alboah Further information, photos, or an inspection appointment are available upon request. Price: Upon request Location: Upon request Errors and prior sale excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Capacity: 1040 x 3.5 mm - Light gauge sheet metal protection at the rear - Ortlinghaus brake and clutch combination - Tilting roller table or sheet metal lifting system with plastic rollers Lasdpfxjzq Uvxe Alboh - Central lubrication system

Condition: used, Year of construction: 2007, Osa X 350 mm Osa Y 250 mm Osa Z 350 mm Table 600 x 450 mm Lajdpozqr Ryefx Albeh Max. workpiece length 650 mm Max. workpiece width 420 mm Max. workpiece height 250 mm Workpiece height 400 kg Machine dimensions 1930×2690×2620 mm Weight 2700 kg

Condition: reconditioned (used), Year of construction: 2020, Used MEP Shark 350 NC HS 5.0 automatic band saw Blade dimensions: 4640x34x1.1mm Blade speed: 15-115 m/min (inverter) Automatic blade tensioner: 1600kg Automatic chip conveyor Adjustable clamping pressure Cutting capacity: round 350mm, square 350x350mm Year of manufacture: 2020 Machine dimensions: 3045x2025x(H)2225mm Lsdpfxjwwr Tqs Albsah Weight: 2800kg

Condition: excellent (used), Year of construction: 2013, Used automatic band saw MEP SHARK 310 CNC HS Blade dimensions: 4640x34x1.1 mm Variable blade cutting speed: 15–115 m/min Laedpfx Alsyyuxnjbeh Cutting capacity: round 310 mm, square 310x310 mm Automatic blade tensioner Automatic chip conveyor Additional equipment: vertical vise Machine weight: 2200 kg The machine is in excellent condition and will be fully inspected and serviced.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, total length: 10,000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic rotary cutting - Double hydraulic clamping set for sheet metal clamping (short and long) Upper beam with water bending groove, oil filler, clamping and leveling material, emergency stop rail along the entire length of the machine, emergency stop actuation integrated into the pedal for the upper beam and bending beam, a second pedal for two-person operation, a safety device for the upper beam, two clamping fingers for short pieces The machine is repaired, inspected, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet metal width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm VA sheet thickness: 1.5 mm Back width: 150 - 1150 mm Color: Light blue/light gray Total power requirement: 400 V Space requirement: 12,500 x (2,367 x 700) + 2070 mm fence Insertion depth: 1150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Number of uprights: 8 Number of clamping jaws: 8 Lodpjwnyu Defx Alboah Bending angle: 145 degrees

Year of construction: 2003, operating hours: 6,215 h, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 150 mm Lajdjx Ruz Rjpfx Albjh WORKING AREA: 3000 x 1500 mm SOURCE: CP 3500 ; 3500 W CONTROL UNIT: PRIMACH 20L NOTE: COMPLETELY OVERHAULED MACHINE IN 2018

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Laedpfjtva Nhox Albjh Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: ready for operation (used), Year of construction: 2021, Machine in good working condition and located within EU! Available now for transport. Ledpfxjxpvh He Albsah Ask for additional details!

Condition: excellent (used), Countersink, countersink, deburring countersink, pipe deburrer -Manufacturer: Rhinos, Countersink 90° MT Shank Mount MK2 -Blade diameter: Ø 50 mm Lsdezp Hn Depfx Albjah -Outer chamfers: 25-44 mm -Internal machining range: 20-39 mm -Dimensions: Ø 50 x 160 mm -Weight: 0.9 kg

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: FANUC, controller model: Series 31i B5, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis CHIRON DZ15W MAGNUM HS was manufactured in 2015. It features an X-travel of 730 mm, Y-travel of 400 mm, and Z-travel of 425 mm. The machine is equipped with a robust table surface measuring 1,060 mm x 430 mm. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ15W MAGNUM HS vertical machining centre we have for sale. Contact us for further details. Laedpfx Aljzhm Emobeh • Quantity: 5 units available • Spindle drive: 14/15 kW • Max. torque: 95 Nm • Table surface: 1.060 mm x 430 mm Technical Specification Taper Size HSK 63

Condition: like new (used), Year of construction: 2014, load capacity: 6 kg, arm reach: 1,450 mm,

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system Laedjw Hxiwjpfx Alboh c/w tooling ----- Clearance Sales -----

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 200401, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Laedpfezzz Eujx Albjh Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, table load: 700 kg, overall weight: 3,800 kg, spindle speed (max.): 22,000 rpm, number of axes: 3, This 3-axis Fidia CORTINI HS 644 was manufactured in 2001. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 400 mm. The machine has a maximum linear axis speed of 30 m/min and a robust table size of 1000 x 500 mm with a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Fidia CORTINI HS 644 vertical machining centre. Contact us for further details. • Accuracy: • Positioning accuracy (ISO 230-2): 0.010 mm • Speeds: • Max linear axis speed: 30 m/min • Max acceleration: 3 m/s² • Table: • Dimensions: 1000 x 500 mm • T-slots: • Number: 4 • Width: 14 mm • Pitch: 140 mm • Electrical supply: • Standard: EN 60204-1 Laodpfx Asy S S A Iolbjh • Voltage: 400 V • Frequency: 50/60 Hz • Pneumatic supply: • Standard: PNEUROP 6611 • Pressure: 0.7 MPa ±10% (7 bar ±10%) • Footprint: 2150 x 2450 mm • Environmental conditions: • Ambient temperature: 10–40 °C • Relative humidity: 10–80% (non-condensing)

Condition: new, Year of construction: 2023, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height 860 mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Display Model Current list price: 55,910 euros Fully automatic band saws with a two-column guide system for production cuts, particularly in materials that are difficult to machine and solid stock. With this machine, MEP offers you a machine that is at the highest technical level and, thanks to the use of the highest-quality materials, features an Lsdpfxjlf Tu Uj Albeah unmatched, robust, and torsionally rigid structure. An extremely robust saw frame made of gray cast iron provides the necessary stability, which leads to impressive cutting results, and the sturdy gray cast iron columns on which the saw frame glides via preloaded linear guides ensure ensure the highest cutting precision even under maximum load. The modern machine control system (MEP NC 5.0) offers the user maximum ease of operation and ensures trouble-free operation. (Monitoring/Evaluation/Correction in real time) MAXIMUM PERFORMANCE > The two operating modes (semi-automatic and automatic) enable efficient cutting under all conditions. > The control system allows for the storage of up to 100 cutting programs, each with different quantities and lengths, and minimizes programming time for frequently executed jobs. > The automatically detected starting position of the saw head reduces the setup time. > The saw headâ??s feed via linear guides driven by hydraulic cylinders with preloaded ball screws ensures reduction of mechanical vibrations during cutting and greater stability. > The automatic alignment of the front saw blade guide head based on the dimensions of the bars to be cut reduces processing time. > Saw blade tension is controlled by the brushless motor and is constantly monitored and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system, with a 600 mm stroke, is repeatable and cuts all lengths. > The vertical roller pair allows for holding and aligning any type of bar or bundle that is fed into the machine. > The vector drive for stepless adjustment of the blade speed from 15 to 100 m/min enables the cutting of any material. > The motorized chip conveyor can be mounted to the right or left of the cutting area . FEATURES: Fully automatic control â?? NC 5.0 - Innovative (Windows CE-based) touchscreen control with additional soft- touch buttons for frequently used functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via a servo valve , constant monitoring of the preselected torque 4, and with precise feed rate adjustment in millimeters per minute 5 -Adjustment/preselection of the continuously variable band speed in m/min. -Band saw tension with tension monitoring and display via an electronic converter -Automatic detection of the start of the cut -Large 7" color touchscreen for displaying and selecting all machine functions and parameters, and programming in seconds. Display of detailed alarm and error messages -Numerous special functions, including executing various lengths and quantities (10 programs) as a sequence, clean cut, step-by-step execution, and much more. -Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel -Carbide band guides for maximum cutting precision, hinged for easy saw band replacement -Large, adjustable cast steel idler ...

Condition: ready for operation (used), Year of construction: 2014, operating hours: 24,209 h, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis CHIRON FZ 15 W Magnum HS vertical machining center was manufactured in 2014. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this CHIRON FZ 15 W Magnum HS vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits Laodpfxex D Nl Ue Albeh • Number of tools per spindle: 48 • Tool holder: hsk-a 63 • Main spindle max. Torque: 95 nm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Lsdpfx Alezcwylsbjah Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW