Used Mwm Tcg 2032 V 16 for sale (42,316)

Condition: used, Year of construction: 2012, operating hours: 28,000 h, machine/vehicle number: 2210461, disponibile blocco motore,2 testate14 basi teste,volano,12 bielle 12 pistoni,coppa olio motore,albero motore (da riparare) Hodjynwtpepfx An Asl

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Hedpfx Anev Uag Is Ajl

Condition: not inspected (used), Year of construction: 1971, functionality: unexamined, power: 992.92 kW (1,349.99 HP), fuel type: diesel, number of cylinders: 16, type of cooling: water, MWM 16-cylinder engine removed from a decommissioned inland vessel. The engine was operational at the time of removal. It has been stored for approximately 11 years. Functionality has not been tested. Loading is possible. Sale only to commercial buyers and under exclusion of any warranty. Hedpow Aphcofx An Ael

Condition: ready for operation (used), Year of construction: 2003, overall weight: 46,700 kg, fuel type: gas, output frequency: 50 Hz, MWM Deutz TBG 632 V16, including CHP generator (BHKW), dual fuel, gas, diesel, year 2003, 7 units available, control system, load switch cabinets, chimneys, heat recovery boilers, pumps, transformers, etc. Dismantling of the entire power plant. Hsdpfx Asy Hmhben Aol

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Hsdpfsmi Rpisx An Ael 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: used, Year of construction: 1994, machine/vehicle number: 628.16.010032, power: 3,600 kW (4,894.63 HP), fuel type: diesel, rotational speed (max.): 1,000 rpm, Generator: 4250 KVA, 50 HZ, 10000 V Hedoxmu Rbjpfx An Ael

Condition: ready for operation (used), Year of construction: 2004, operating hours: 72,318 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR – MWM TBG 620 V16 K (Complete Package) Available MWM TBG 620 V16 K natural gas generator set, offered as a complete package with auxiliaries. The unit has 72,318 running hours from new and was shut down in 2022 while operating at full load. Maintenance All maintenance has been carried out by official service, following the manufacturer’s scheduled maintenance plan. Technical data • Brand / Model: MWM – TBG 620 V16 K • Electrical output: 1,364 kW • RPM: 1,500 rpm • Frequency: 50 Hz • Year of manufacture (YOM): 2004 • Total running hours (since new): 72,318 h • Fuel: Natural Gas • Generator brand: Marelli Generators • Voltage: 400 V Scope of supply (included) • MWM genset • Control cabinet • Auxiliary control cabinets • Gas ramp • Cooling system Hodeytq A Uopfx An Ael • Protection switchgear • Silencer • 3-Way Valve • Documents Status / Availability Availability: Immediate For more information please contact us!

Condition: good (used), Starter motor, diesel engine, drive motor, marine diesel engine, diesel generator -Manufacturer: Bosch, starter motor from MWM RHS 518V16 generator -Type: Bosch Voltage: 24V 9PS -Teeth: 11 -Dimensions: 445/150/H210 mm Hsdpfxsivfgbo An Ajl -Weight: 26 kg

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator Hodpfx Aeivqmlsn Asl -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 Hjdpfx Aoivfgfsn Aol -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Condition: used, Year of construction: 1974, operating hours: 474 h, functionality: limited functionality, overall weight: 3,500 kg, power: 280 kW (380.69 HP), MWM Diesel Emergency Power Generator 280 kW - Piller Generator We offer an emergency power generator for sale. ⭐︎ Condition: The generator is used and in good condition. ⭐︎ Condition: good (used) Fully functional and well maintained! Recently dismantled! MWM Generator Set 280 kW ++ incl. electrical control cabinet + battery Manufacturer: MWM, Germany Engine: - Manufacturer: MWM - Engine type: TBD 232 V 12 - 12 cylinders - Turbocharged - Diesel - Water-cooled - 1500 rpm Generator: - Manufacturer: Anton PILLER (Germany) - 280 kW - 231 / 400 Volt - 50 Hertz - Operating hours meter: 474 hours Condition: - The generator was used occasionally for backup power in a public building - It has only run 474 hours - Regular maintenance and test runs have been carried out ⭐︎ For further technical details, please see the photos. Scope of delivery as shown Hsdpfxowv Uzus An Aol Viewing before purchase is possible and expressly encouraged. All items are dismantled, cleaned, and visually inspected for damage by our qualified staff before sale. All relevant data/information can be found in the description and images. All information is given to the best of our knowledge and belief. The offered item is sold as described and as inspected. International buyers welcome Please ask for shipping costs to Europe and overseas Scope of delivery: - MWM generator set 280 kW - Electrical control cabinet Shipping: - Nationwide shipping within Germany is possible at extra cost - To provide an exact freight quote, please send an inquiry with your postal code

Condition: good (used), mileage: 782,543 km, first registration: 02/1992, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, total length: 5,900 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1992, = Further Options and Accessories = - Aluminum fuel tank - Leaf suspension - Air suspension - Sleeper cab - Sun visor Hsdpfx Ajuxyc Ien Aol = Remarks = Volvo F16.500 Globetrotter 4x2 – Fully renovated – Volvo Demo colors – New paint – Perfect condition Year: 28-02-1992 Mileage: 782,543 km VIN: YV2H3A6A8NA369308 Registration: 76-BTB-7 Volvo in perfect condition New paint – Volvo Demo colors Interior like new Air suspension 3.60 m wheelbase Telma retarder Cruise control Double bed Electric windows Air horn Additional lights Visit our website for all photos and details: = Further Information = Technical Information Number of cylinders: 6 Engine capacity: 16,115 cc Transmission: Volvo manual gearbox Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Tire tread left: 70%; Tire tread right: 70%; Suspension: Leaf spring Rear axle: Tire size: 295/80R22.5; Dual-mounted; Max. axle load: 11,500 kg; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Air suspension Weights Unladen weight: 8,000 kg Payload: 11,000 kg Gross vehicle weight: 19,000 kg Functional Body manufacturer: Volvo Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Identification License plate: 76-BTB-7

Condition: used, CITIZEN CINCOM K 16 E V II P is a CNC automatic lathe designed for precision, high accuracy and reliability. Capacities: max turning Ø 16 mm, turning length 200 mm, spindle bore 20 mm, max threading 8 M, back‑machining 80 mm. Specs: 7 axes, spindle 200–10000 rpm, 2× HF 60000 rpm, spindle motor 3.7 kW, 4 driven tools 6000 rpm, 3×400 V 50 Hz, weight ≈2250 kg, L2020×W1070×H1680 mm. Accessories: LNS bar feeder, Donaldson oil‑mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Hjdsyxn D Ujpfx An Ajl

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. Hjdpfsx D Ribjx An Ajl • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: as good as new (ex-display), Semiconductor protection Make Klöckner Moeller Type DIL SM 16 V-k Hjdpfjmxi U Ssx An Aol 400 Volt 16 A 7,5 kw unused from stock

Condition: used, mileage: 85,500 km, power: 115 kW (156.36 HP), color: white, driver cabin: day cab, gearing type: mechanical, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, power assisted steering, - Driver airbag with seatbelt tensioner, ESP, onboard computer, tachometer, electric windows left and right, double passenger bench seat with headrests, headrest for driver's seat, single driver's seat, electrically adjustable and heated exterior mirrors, 6-speed manual gearbox, power steering, 110 Ah/400 A battery, quartz-controlled digital clock, 2100 W alternator (14 V x 150 A), manual headlight leveling, dot matrix display, tire repair kit, wheels: steel rims 6.5 J x 16 H2, height-adjustable steering wheel, upholstery: fabric, height-adjustable front seatbelts, partition wall to cargo area, rear doors with 270° opening angle, solid color paintwork, right-side sliding door, underbody protection, left-side exhaust, diesel particulate filter, 70-liter fuel tank, radio, trailer socket preparation, service indicator, daytime running lights, electronic immobilizer, central locking system, loading dimensions (mm) L x W x H: 3,500 x 1,800 x 1,900 We are happy to provide you with an offer for the trade-in of your used vehicle. Should you wish to lease or finance your vehicle, we will gladly prepare a tailored offer for you. Errors and prior sale excepted! Mr. Rudolph will be pleased to assist you by phone at: . - ESP, particulate filter, bulkhead partition Cab: local distribution transport = Further information = Engine displacement: 2,287 cc gross vehicle weight: 3,500 kg Cargo space dimensions (LxWxH): 3,500x1,800x1,900 Please contact Tobias Ebert for further information. Hjdpfxsyfnppe An Asl

Year of construction: 2010, operating hours: 2,500 h, condition: ready for operation (used), functionality: fully functional, gruppo elettrogeno a doppia alimentazione DIESEL ed OLIO VEGETALE,elettroradiatore di raffreddamento esterno. Hsdpfxey Ip R Ie An Asl 1500KWA in container super silenziato

Condition: like new (used), Year of construction: 2019, operating hours: 10,800 h, For sale: complete containerized CHP (Combined Heat and Power) unit. Dimensions: 17x3x3.5 m (LxWxH). Equipped with MWM gas generator. Brand: MWM. Model: 2020 V20. Year of manufacture: 2019. Power output: 2000 kW. Voltage: 400 V. Operating hours: 10,800. In mint condition, ready for immediate use. Fitted with emergency cooler and exhaust heat exchanger. Hjdpfx Aey Him Ton Asl

Condition: good (used), functionality: fully functional, fuel type: diesel, power: 257 kW (349.42 HP), nominal power (apparent): 300 kVA, Generator set 300 kVA Generator: GARBE LAHMEYER Type: AT 315 LB 51 400 V Output: 300 kVA Engine: MWM-Diesel TBD 232V12 installed in container Hsdpfot S Ny Usx An Aol

Condition: excellent (used), functionality: fully functional, fuel type: diesel, output voltage: 10,000 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 6,750 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Deutz MWM, 5 units of power generator (power plant), total output: 6750 kVA. Completely overhauled in 2017, equipped with a new control system and advanced central management. The units were in use until 2025 as emergency backup power supply for a large data center and have always been maintained to the latest technical standards, with comprehensive servicing and upkeep. The system is in excellent condition. Hsdpfxsyzb R Te An Asl Engine: Deutz MWM TBD604 BV12, 200 operating hours, year built 1994. Generator: Siemens 1FC7 567, 10,000V, 50Hz, 78A, 1350 kVA. Generator control: DEIF, genset control, new version year 2016/17. Central management: DEIF, load management, synchronization, fuel management, etc., year 2017. 10kV circuit breaker: Siemens. Accessories: silencers, radiators, pumps, etc.

Condition: ready for operation (used), Year of construction: 2014, sheet width 3140 mm plate thickness 6.5 mm ST thickness at "Niro-steel" 4.0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable max. 800 mm Control M 15 S total power requirement 7.5 kW weight of the machine ca. 6350 kg Hjdpfsyuzcnox An Ael dimensions of the machine ca. 4350 x 2250 x 1900 mm current new price approx. 60.000 euros special price on request Description : - robust folding machine - high precision for wide bending processes - increased rigidity in design - hydraulic drive - with rack and pinion for better control and accuracy - compared to normal hydraulic systems * Easy adjustment of material thickness * Adjustable hydraulic pressure * to adjust the thickness of the material * This prevents damage to the surface of the materials - Smallest return bend 25 mm Equipment: - Program control "M 15 S" with LED display * for bending angle adjustment - Manual backgauge 0 - 800 mm - Manual lower beam adjustment - Light barrier front and rear - 1x freely movable triple foot switch - 2x forklift pockets for easy transportation - Operating instructions (PDF)

Condition: new, Year of construction: 2025, fuel type: diesel, power: 176 kW (239.29 HP), motor manufacturer: Perkins 1106A-70TAG4, General information Field of application: Construction Weights Empty weight: 2.043 kg Functional Generator capacity: 220 kVA CE mark: yes Other information Fuel consumption: 34.6 L/Hour at 75% Load Prime Generator: FG Wilson FGL30120 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 394 l Transport dimensions (LxWxH): 3,52x1,32x1,68 Hedpsrduvtofx An Asl Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: FGWPEP49LRPD02245, fuel type: diesel, power: 176 kW (239.29 HP), motor manufacturer: Perkins 1106A-70TAG4, General information Field of application: Construction Hjdpfxjwaqwge An Ajl Weights Empty weight: 1.533 kg Functional Generator capacity: 220 kVA CE mark: yes Other information Fuel consumption: 34,6 L/Hour at 75% Load Prime Generator: FG Wilson FGL30120 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 394 l Transport dimensions (LxWxH): 2,51x1,01x1,64 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 353 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN B + 1-year warranty + Includes aquamatic system + Includes end cell connectors & REMA 320 connector (other types available on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,035 mm Width: 353 mm Height: 784 mm Weight: approx. 770 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde E 15 C - 322-00 Linde E 18 Z - 322-00 Linde R 10 BN - 1120-00 Linde R 10 CN - 1120-00 Hodpowzvr Eofx An Ajl Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal changeover Linde R 12 BN - 1120-00 Linde R 12 CN - 1120-00 Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal changeover Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 CN - 1120-00 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - frontal changeover Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 16 AS 1140 - 1120-00 Linde R 16 CN - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal changeover Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N HD - 1120-00 - frontal changeover Linde R 16 SN - 115-08 Linde R 16 SN - 115-12 Linde R 20 - 1120-00 Linde R 20 W - 1120-00 Linde V - 5213-00 Linde V 10 E - 146-00 Linde V MODULAR - 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Common battery sizes available – please inquire. Transport can be arranged.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 353 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN B + 1 year warranty + Includes aquamatic water filling system + Includes end discharge cable & REMA 320 connector (other connectors available upon request) + Capacity: min. 90-100% (C5 capacity test protocol supplied with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,035 mm Width: 353 mm Height: 784 mm Weight: approx. 770 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde E 15 C - 322-00 Linde E 18 Z - 322-00 Linde R 10 BN - 1120-00 Linde R 10 CN - 1120-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 – front change Linde R 12 BN - 1120-00 Linde R 12 CN - 1120-00 Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 – front change Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 CN - 1120-00 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 – front change Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 16 AS 1140 - 1120-00 Linde R 16 CN - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 – front change Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N HD - 1120-00 – front change Linde R 16 SN - 115-08 Linde R 16 SN - 115-12 Linde R 20 - 1120-00 Linde R 20 W - 1120-00 Linde V - 5213-00 Linde V 10 E - 146-00 Hsdpfx Anewzvr Sj Ael Linde V MODULAR - 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Common battery sizes available, please inquire. Transport possible.