Used Mori Seiki Nt 1000 Wz for sale (16,916)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turn-mill spindle Full indexing specifications: Yes X-axis travel: 380 mm Dsdpfx Aksy Edc Hocecg Y-axis travel: ±105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ±120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: Ø70/Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower Turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool stations: 10 Tool rotational speed: 6,000 min⁻¹ Driven tool power: 1.5/1.2 kW Main Spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Sub Spindle Spindle speed: 1,000 rpm BW axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang to conveyor, if equipped) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated output: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Powered on: 54,061 hours Spindle 1 operating hours: 9,813 hours Spindle 2 operating hours: 5,002 hours EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blower outside the spindle Foot switch (double) for main and sub spindle

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm Dcedpfx Akey Eydyjceg MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

Condition: like new (used), Year of construction: 2010, CNC controller: FANUC FS-31iA5 (MAPPS 4) Capacity X-axis travel mm: 685 Y-axis travel mm: 125 Z-axis travel mm: 1075 Turning length mm: 1045 Max. turning diameter mm: ø: 600 Bar work capacity mm: 65 Turn-mill spindle Full indexing specifications: YES B-axis degree: 120º FULL INDEXING SPECIFICATION Speed spindle rpm: 12000 Drive power kW: 18.5/11 Tool magazine Magazine places: 80 Tool holder: CAPTO C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret Number of tool slots St .: 12 Drive power driven tools kW: 5.5/3.7 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Counter spindle Dcsdpfx Aewwuaaokceg Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Equipment Electronic Handwheel Chip conveyor Swivel head Signal lamp High pressure pump Mist collector Workarea light CE conformity Chuck foot switch (double) for main and counter spindle Coolant gun Toolholders are not included Precision NC rotary table, rapid traverse and feed rate 100 1/min incl. direct measuring system Oil skimmer Linear scales Gantry loader LG-10 AII RENISHAW MP700 Working time hours Under power: 76.510 Spindle 1: 11.521 Spindle 2: 9.271 Potencial nominal kVA: 102 Basic machine dimensions / weight Length mm: 8.000 Width mm: 4.000 Height mm: 3.000 Weight kg: 15.000

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, bar passage: 65 mm, bar diameter (max.): 65 mm, We are offering this ready-to-use Mori Seiki NTX1000 CNC turning and milling center, year of manufacture 2011. Manufacturer: Mori Seiki Model: NTX1000 Year of manufacture: 2011 Condition: ready for operation Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center Dodpfx Aoy Hrhajkcjcg Bar capacity: 65 mm FMB bar feeder 3 m Extended tool magazine with 75 positions Chip conveyor with drum filter Knoll high-pressure system 70 Bar Renishaw probing system Numerous tool holders If you have any questions or require more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2012, turning diameter 370 mm turning length 424 mm control MSX-711-IV Mori Seiki swing diameter 370 mm X1- Axis 380 mm X2- Axis 155 mm Z1- Axis 460+155 mm Z2- Axis 610 mm y-axis +/- 105 mm B - axis +/- 120 ° bar material dia. 65 mm speed spindle max. S1 5.000 / S2 6.000 U/min. spindle bore S1/S2 65/38 mm 12000 1/min tool taper Capto C5 toolpiece magazine: chain magazine 76 Stück total power requirement 45 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Dcodpfx Akovx Uvrecjg Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,597 h, functionality: fully functional, turning length: 424 mm, turning diameter: 370 mm, bar diameter (max.): 65 mm, turning diameter over bed slide: 370 mm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning diameter: 370 mm Turning length: 424 mm Swing diameter: 370 mm X1-axis travel: 380 mm X2-axis travel: 155 mm Z1-axis travel: 460 + 155 mm Z2-axis travel: 610 mm y-axis travel: ±105 mm B-axis travel: ±120° Bar diameter: 65 mm Spindle 1 Maximum speed: 6,000 rpm Number of speed ranges: 2 (winding switch) Spindle mounting: JIS A2-5 Spindle bore: 61 mm C-axis resolution: 0.0001° Spindle diameter (front bearing): 100 mm Maximum torque (40% DC/continuous): 223/158 Nm Spindle 2 Maximum speed: 6,000 rpm Number of speed ranges: 1 Spindle mounting: 80 g6 flat nose Spindle bore: 38 mm C-axis resolution: 0.0001° Spindle diameter (front bearing): 70 mm Maximum torque (15% DC/continuous): 49/22 Nm Tool Spindle Number of tool stations: 1 Tool shank type: C5 Spindle diameter (front bearing): 65 mm Tool change time (tool to tool): 1.2 s Maximum tool diameter with adjacent positions occupied: 70 mm Maximum tool diameter with adjacent positions free: 130 mm Maximum tool length: 250 mm Djdpfx Akoxf A Apecjcg Maximum tool length (over 70 mm diameter): 210 mm Maximum tool weight: 5 kg Minimum indexing increment for B-axis: 0.0001° Maximum spindle speed: 12,000 rpm Maximum torque (15% DC/continuous): 49/22 Nm Turret 2 Number of tool stations: 10 Maximum shank diameter for boring bars: max. 32 mm Feed Drives Rapid traverse X-axis (tool spindle): 40,000 mm/min Rapid traverse Y-axis (tool spindle): 40,000 mm/min Rapid traverse Z1-axis (tool spindle): 50,000 mm/min Rapid traverse X2-axis (lower turret): 30,000 mm/min Rapid traverse Z2-axis (lower turret): 30,000 mm/min Rapid traverse A-axis (workpiece unloading unit): 36,000 mm/min Rapid traverse B-axis: 100 rpm Rapid traverse C-axis: 250 rpm Tool Magazine Tool magazine: chain magazine, 76 positions Control Control: MSX-711-IV Mori Seiki Control system: MAPPS MACHINE DETAILS Power-on hours: 75,992 h Total power consumption: 45 kW Weight and Dimensions Machine weight: approx. 10.5 t Space required: approx. 2.71 × 2.43 × 2.40 m Operating Hours Head 1 Operating time: 48,606 h Machining time: 8,597 h Operating Hours Head 2 Operating time: 48,382 h Machining time: 2,664 h EQUIPMENT Renishaw HPRA Blum Laser Control Direct measuring system X, Y, Z, B SMW Autoblok KSZ-MB-040-Z140 collet chuck Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / HPC via milling spindle, 7-stage up to 70 bar Chip conveyor ConSep 2000

Condition: ready for operation (used), Year of construction: 1998, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 2000 mm Y-AXIS TRAVEL: 1300 mm Z-AXIS TRAVEL: 1200 mm SPINDLE: 60-6000 rpm; 30-37 kW; ISO 50 - BT PALLET: N.2 ; 1000X1000 mm MAX ADMITTED LOAD: 3000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 120 POS CONTROL UNIT: MSC 502 WEIGHT: 35200 Kg OVERALL DIMENSIONS: 5330 x 7720 x 3810 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; Dcodsyvlx Dspfx Akceg RS 232 SERIAL PORT ; TOOL SETTER NOTE: MAX PIECE DIAMETER 2000 mm; MAX HEIGHT 1550 mm; MAX WEIGTH 3000 Kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,981 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,035 mm, spindle motor power: 18,500 W, overall weight: 5,600 kg, controller manufacturer: FANUC, controller model: MSG-501 MAPPS, number of axes: 3, This 3-axis MORI SEIKI SL-253B MC/1000 was manufactured in 2000. It features a maximum turning diameter of 260 mm and a turning length of 1,035 mm. The machine is equipped with a spindle speed range of 35–3,500 RPM and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-253B MC/1000 horizontal turning machine we have for sale. Contact us for further details. • Max turning diameter: 260 mm • Max turning length: 1035 mm • Spindle nose/bore: JIS A2-8 / 86 mm • Bar capacity: 74 mm • Rapid traverse (X/Z): 18 / 24 m/min • Live tooling (BMC): 3,000 RPM / 6.5 kW • Tailstock: MT 5, 150 mm stroke • Control: MSG-501 MAPPS (Fanuc) • Turret: 12 station VDI 40 Dcjdpfx Asy D Rnyskceg Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Dodpfx Aeyzzcpjkcjcg Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: good (used), Year of construction: 2002, Machine is in good working condition. Parts shown by hand not come. Dcodpfexbqnxjx Akcsg

Condition: good (used), Year of construction: 2006, Technical data shown on picture. Parts shown by hand not come. Dcsdst Aa H Tepfx Akcog

Condition: good (used), Year of construction: 2007, CNC Turning and Milling Center Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year of manufacture: 2007 TECHNICAL DATA: Max. turning length: 1,055 mm Turning diameter: 120 mm Max. swing over bed: 285 mm Rapid traverse (X/Z): 20 m/min Main spindle Dcjdowxahfepfx Akceg Max. speed: 3,500 rpm Drive power: 7.5 / 5.5 kW Bar capacity: 43 mm Spindle nose: A2-6 Number of turrets: 2 Tool stations: 6 + 6 Tool interface: Capto Tailstock Quill diameter: 85 mm Quill taper: MK 4 Quill stroke: 70 mm Tailstock traverse: 520 mm Steady rest: hydraulic Steady rest: SMW SLU-1-Z Equipment features: Chip conveyor Coolant pump Tool measurement system

Condition: used, Year of construction: 2010, DMG MORI SEIKI year 2010 3 axis machine Type: DuraTurn 310 eco control: MSX 853 MAPPS IV C axis live tools turning diameter 228 mm turning lenght 393 mm turret sauter VDI30 tailstock tool probe chuck kitagawa 210mm spindle bar capacity 51mm Djdoqiz Tiepfx Akcjcg weight machine 3500kg equipment;chip conveyor with coolant tank and pumps 3 live tool holder WTO 4 normal holder vdi30 books machine

Condition: ready for operation (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm, Tailstock, 10” Chuck, Swarf Conveyor, Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Dcodpow Rrzaofx Akceg Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Ex works - £54,950.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2010, 660mm turning diameter, 983mm turning length, Max distance between centres 1500mm. +/-210 mm Y Axis, C Axis 0.001 degrees on both spindles, 3,000rpm Spindle speed. 80mm bar capacity. Main spindle 22Kw, 12,000rpm turn mill spindle, +/-120 degrees on B axis milling spindle. Djdpfsy Hiibex Akcocg Milling power 18.5Kw, 100 Station Toolchanger, Capto C6 milling spindle, hydraulic steady, coolant, Tool setter, Hobbing function to spindle 1, Mori seiki MSX-701IV control.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 462, turning length: 500 mm, turning diameter over cross slide: 250 mm, turning diameter: 250 mm, spindle motor power: 7,500 W, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 56 mm, travel distance X-axis: 150 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, rotational speed (max.): 3,500 rpm, bar diameter (max.): 56 mm, overall weight: 2,800 kg, turning diameter over bed slide: 310 mm, Equipment: documentation/manual, For sale: MORI SEIKI horizontal lathe - Model: FRONTIER L1 - Machine No.: 462 - Controller: FANUC – MSC 521 - Year: 7/1996 The machine has been regularly serviced and maintained, precise, and in excellent condition. It was used for toolmaking jobs in small batches of up to 50 pieces, flawless and accurate. Djdpfxsy Ibx Re Akcjcg It is connected to the power supply and ready for immediate operation.

Condition: used, Year of construction: 2008, operating hours: 36,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 640 mm, rotational speed (max.): 12,000 rpm, spindle speed (min.): 12,000 rpm, operating hours of spindle: 36,000 h, number of spindles: 1, input voltage: 400 V, Mori Seiki VS10000 2008 Control & Interface NC System FS-18iMB (MAPPS 3) CRT Size 15 Inch Software Languages English (NC, PC, MAPPS, Warning) Electrical Power Factory Voltage 380 V - 480 V Frequency 50 Hz Step-Down Transformer Provided (with Cable) Physical Travels X-Axis Travel 2050 mm Y -Axis Travel 1000 mm Dodpfx Akjyi Ic Dececg Z-Axis Travel 600 mm Spindle Specs Spindle Speed 12,000 min⁻¹ Spindle Taper 7/24 Taper No. 40 Retention Knob MAS 90 Degree Tooling & ATC Tool Storage Capacity 40 Tools Offset Pairs 64 Pairs Custom Variables 82 Common Variables Coolant & Chips Coolant Tank 800 L (Water-Soluble) Chip Conveyor (Out) Scraper (Drum Filter Type) Chip Conveyor (In) Provided Measurement Work Probe (Spindle) Renishaw Optical Probe Work Probe (Table) Renishaw MP4 Touch Sensor Location - Israel ready for inspaction

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Dcedpfx Asyv E T Uokcog Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Dodpfed Hkucex Akcocg Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Dcjdpfswztq Esx Akcog Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 370 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 380 / 615 [mm] - Y stroke : 105 [mm] - Rapid traverses rates (X/Y/Z) : 40.000 / 40.000 / 50.000 [mm/min] - B Axis stroke : +/- 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : CAPTO C5 - Spindle speeds : 12000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Tailstock stroke : 815 [mm] POWER SUPPLY - Total installed power : 39 [kVA] EQUIPMENT - CNC : FANUC 31iB5 - Electronic handwheel - Coolant tank - Filtration : ECODE IP 600 C Dodpfx Akey I Di Escscg - Chips conveyor : MAYFRAN CS 1 - Oil mist extractor - Tool probe : Renishaw - Workpiece probe : Renishaw - Collet chuck - Chuck 3 jaws

Condition: excellent (used), Year of construction: 2015, operating hours: 11,100 h, functionality: fully functional, machine/vehicle number: NTX1150102, Year 2015 with F31iB5 control and CELOS Country of manufacture: JP Voltage: 380V/50Hz/3ph Dimensions: 4169x2543x2543 mm Net machine weight: 10,000 kg TECHNICAL SPECIFICATIONS Control: Fanuc F31iB5 with CELOS Main spindle: X1 axis: 455 mm Y axis: +/- 105 mm Z1 axis: 800 mm (+165 for ATC) B axis: 240° Turret 2: X2 axis: 160 mm Z2 axis: 730 mm Spindle 1 / Spindle 2: C axis: 360° / 360° Tailstock: A axis: 820 mm Max. distance between centres: 1,050 mm Max. turning diameter Main spindle: Ø 430 mm Turret 2: Ø 274 mm Max. turning length: 800 mm Bar diameter: Ø 52 mm . Ø 65 mm Unless otherwise specified or in case of errors or omissions, the technical data is provided without commitment. Dcodpfxjw T Snfe Akcog

Condition: good (used), Year of construction: 2007, Brand: Mori Seiki Type: NT3200 Year of build: 2007 Serial number: NT320GA0030 Additional information: Run time: 7976H Maximum turning diameter (milling head): 600mm Maximum turning diameter (turret): 210mm Maximum turning length: 1045mm Spindel bore: 67mm Number of tool spaces: 40 Spindel: Kitagawa SS1666 Spindel speed: 5000 RPM Control system: Fanuc Series 31i Equipped with: tool presetter,Absolent AB oil mist filter, Enomoto chip conveyor, Ercoatius coolant filter, documentation Milling head Maximum speed: 12000 RPM Tool shaft size: C5 X-axis travel: 685mm Y-axis travel: ±125mm Z-axis travel: 1075mm B-axis travel: ±120° X/Z-axis rapid traverse: 50 m/min Y-axis rapid traverse: 30 m/min Turret Number of tool places: 12 Driven tool speed: 6000 RPM X-axis travel: 130mm Z-axis travel: 970mm X/Z-axis rapid traverse: 30 m/min Machine dimensions LxWxH: 5200x3100x3000mm Own weight: 14400 kg Including bar feder Brand: Iemca Type: VIP 80E II Year 2007 S/N: 020710QA07 Own weight: 605 KG Bar capacity: 6-80mm Dcodpfx Aoxn Ddtekcog

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 71, turning length: 360 mm, turning diameter: 440 mm, spindle speed (max.): 5,000 rpm, bar passage: 45 mm, controller model: Fanuc 18iTA, TECHNICAL DETAILS Dcjdjy E Hpiopfx Akceg Turning diameter: 440 mm Turning length: 360 mm Spindle speed: 50 - 5,000 rpm on both spindles Bar capacity: 45 mm Spindle nose: ASA A2-5 C-axis: 0.001 on both spindles MACHINE DETAILS Control: Fanuc 18iTA Upper turret: 12 driven stations Lower turret: 12 driven stations Main spindle: 11 / 7.5 kW Sub spindle: 7.5 / 5.5 kW EQUIPMENT Chip conveyor Parts catcher Bar loader interface Bar loader: LNS Mini-Sprint S2 42/3M

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 230 mm, travel distance Z-axis: 520 mm, overall weight: 4,100 kg, number of axes: 5, This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It features a maximum X-axis travel of 230 mm and Z-axis travel of 520 mm. The machine includes a hydraulic chuck system, chip conveyor, and multiple driven tool holders for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-153 SMC horizontal turning machine we have for sale. Contact us for further details. • Machine configuration • Enclosed CNC lathe • Hydraulic chuck system • Foot pedal included • Automatic bar feeder interface likely installed • Tooling and included holders • 3x radial driven tool holders • 4x axial driven tool holders • 2x for main spindle machining • 1x for counter spindle machining • 1x shared output for both spindles • 2x special double boring bar holders (bore Ø20 mm) • Prepared for Schunk TendoTurn DSE hydraulic clamping accessories (Schunk accessories not included) • Multiple external tool holders • Axial tool holders • Boring bar holders with Ø25 mm and Ø32 mm bores • Accessories for direct mounting of square shank tools on turret • Collet holders Dcedoy N Shlspfx Akcjg • 2x Bellegrandi collet holders type MSCTN52 & MSCTNR52 • Suitable for BA and BD type collets size 52 • For main and counter spindle use • Electrical data • Voltage: 200 V • Frequency: 50 Hz • Full load current: 116 A • Spindle motor current rating: 76 A • Rated power: 40 kVA • Condition • Currently disconnected • Reported functional before removal • Available for inspection Additional equipment • Chip conveyor included (separate accessory) • LNS Hydrobar Sprint 555 / 3M automatic bar feeder • Serial number: 220250 • Year: 2006 • Bar length capacity: 3000 mm • Guide channel suitable for turning applications • Compatibility: Seller states compatible with Mori Seiki SL-153 SMC with minor modifications; reportedly never worked with this lathe previously • Condition: Reported functional Technical Specification Counter Spindle Yes Driven Tools Yes