Used Mixing Trough for sale (2,620)

Condition: good (used), Mixing tub, mixing bowl, mixing trough -Bathtub depth: 470 mm Iijdpfob N Ulasx Apceg -Contents: approx. 220 l -Corners: rounded -Internal dimensions: 800 x 610 x D 470 mm -External dimensions: 840/860/H640 mm -Weight: 32 kg

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. Iiedpfxezmyvij Apcsg 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: excellent (used), Becomix Stirring & Mixing Tank Electric lift lid Scraper and mixer motors Iisdjx Dnkijpfx Apcjg 316 stainless steel 3000 lts capacity

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, As Constmach, we manufacture stationary asphalt plants designed to deliver maximum efficiency, durability, and quality for your construction and infrastructure projects. Thanks to our modern production technologies, our plants, with capacities ranging from 60 to 200 tons per hour, enable you to produce high-quality asphalt mixtures. Each component—the drying drum, mixer, burner, and filter systems—is designed for long life and high performance. This ensures minimum energy consumption, maximum mixture homogeneity, and low maintenance costs during production processes. Key Features: High Capacity: Different models with a production range of 60–200 tons/hour provide the right solution for every project. Flexible Design: Customizable structure according to your project requirements. Iisdpfx Asxp Ut Iepcsg Quick Installation: Can be put into operation in a short time thanks to the modular system. Advanced Control Systems: PLC-based automation minimizes operator errors and optimizes the production process. Add power to your projects with Constmach stationary asphalt plants. Make a difference in asphalt production with our facilities that offer long-lasting, efficient, and environmentally friendly production advantages. Choose Constmach assurance to achieve quality infrastructure solutions! Why Constmach Stationary Asphalt Plant? Superior Quality: Our stationary asphalt plants offer reliable operation for many years with their high-strength steel structure and durable components. High Efficiency: The production process is faster and more consistent thanks to fully automatic control systems and precise dosing technology. Environmentally Friendly: Bag filter systems with low emission values allow you to produce without harming the environment. Easy Maintenance: Maintenance operations are quick and easy thanks to the modular design. Customer Support: We are with you every step of the way, from pre-sales engineering consulting to after-sales technical support. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products for the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Brand: Kemper Maximum flour capacity: 125 kg Maximum dough capacity: 200 kg Bowl volume: 306 L Number of speeds: 2 Number of timers: 1 Stainless steel bowl Stainless steel spiral Central kneading bar Iiedpfezzz Szex Apceg Bowl protection grid Electromechanical controls Analog timer Power supply: 380 V Increased motor power: 1.1 kW Frequency: 50 Hz Used Kemper SP125 spiral mixer – 125 kg of flour and 200 kg of dough General description The used Kemper SP125 spiral mixer is designed for bakery production that requires kneading large quantities of dough. Its capacity reaches 125 kg of flour, with a maximum load of 200 kg of dough, and a bowl of approximately 306 L. The identified unit has the designation "Type SPL" and "Größe 125" on its manufacturer's plate. It combines a stainless steel bowl and spiral with a two-speed operation. This configuration allows for distinguishing the initial mixing phase from the faster kneading phase, while maintaining a simple organization of the work cycle. Why this model stands out The Kemper SP125 primarily meets the needs of production where kneading capacity and cycle consistency are crucial. Its two speeds are complemented by two timers, allowing the working times to be organized according to the different phases of kneading. The machine also has two motorizations, according to the available data for this unit. The protection grid placed above the bowl limits access to the kneading area during operation. Its design is based on electromechanical controls and a three-phase power supply adapted to a production environment equipped for this type of equipment. Key advantages Maximum capacity of 125 kg of flour, suitable for high-volume production Maximum load of 200 kg of dough Bowl volume of approximately 306 L Two kneading speeds to differentiate work phases Two timers to organize cycle duration Stainless steel bowl and spiral Protection grid for the kneading area Two-motor configuration on this unit

Year of construction: 2011, condition: ready for operation (used), A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible. Isdpfxswrhwzo Apcoig

Year of construction: 2009, condition: ready for operation (used), A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible. Ijdpfey Nna Dox Apceig

Year of construction: 2025, condition: like new (used), functionality: fully functional, Stainless Steel Mixing Tank 500l Iiedpfsyhnn Rsx Apcog speed 23 rpm date of production 2024.12 used 3-4 times only

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 440079, We offer this ready-to-use GSE Dispensing Colorsat Slim M20-WB paint mixing machine, manufactured in 2008. The unit currently has 12 dispensing stations connected, but it can be expanded to include an additional 8. We will also provide the user manual and operating instructions with the machine. The mixing machine features: Sandpiper pump module Network connectivity Pneumatic control Component circulation system Printer Isdpfez Daukox Apcoig Dispensing valves Valve cleaning module Dispensing based on formulations Component dispensing Inventory management system We experienced an issue with the scale, which was resolved after replacing the power supply. During dispensing, the mixing machine occasionally fails to dispense the specified component, but only when dispensing in droplet mode. We can send a video demonstrating the machine's operation upon request. If you have any questions or require further information, please send a message or contact us by phone.

Year of construction: 2011, condition: used, functionality: fully functional, Tonnes produced - 1 800 000 Capacity - 350 t/h First erection in Poland - 2011 The machine has currently been dismantled into its component parts for transport. Cold feeders: Number of beans - 8/pcs Single bin capacity - 14 m3 Drying drum: Lenght - 11 m Diameter - 2,7 m Drum drive - 4 x 22 kW Burner - 2 types of fuel Iodpoy Nc Tfsfx Apceig Burner capacity - 24 MW Mixing Tower Hot Bins: Number of fractions - 6 pcs Number of hot bins + baypass - 6+1 Total capacity of hot bins - 70 t Scales: Mineral scale max - 4 460 kg Bitumen scale max - 400 kg Filler scale max - 440 kg Puddle mixer: Mixer capacity max - 4 300 kg Mixer drive - 2 x 45 kW Ready mix storage: Total bins capacity - 90 t (2 x 45 t) Number of bins - 2 pcs Additives: adhesive, cellulose Bitumen tanks (vertical tanks system): Number of tansk - 4 pcs Total capacity - 320 t Electrical heating - 7,5+24 kW Filler silos: Silo capacity - 2 x 80 t Coal dust silo - 12 m3 Internal filler capacity - 80t Filter: Producer - DM-IF 750 Air flow - 101 138 m3/h Motor capacity: exhaust ventilator 160 kW Filtrating surface 1 125 m2 Plan height - 27 m Transpor costs on the buyer’s side.

Condition: new, functionality: fully functional, power: 125 kW (169.95 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Isdpfx Aoxp Uy Ujpcjig Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Iedpfx Asz Azz Eopcoig Output capacity 750kg p/h

Condition: new, Year of construction: 2025, Mobile Concrete Batching Plant PROMAX M120-TWN (120m³/h) Plant Type : Mobile Concrete Batching Plant with TWIN SHAFT MIXER Plant Capacity: 120m³/ hour freshly compressed concrete Mixer Capacity: 4500/3000 lt (3m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION OPTIONS: Iijdpfx Aoflz Hqopceg *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. *Aggregate Feeding system. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. Isdszzvf Ajpfx Apcoig The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: refurbished (used), functionality: fully functional, power: 15 kW (20.39 HP), gearing type: automatic, fuel type: electric, color: yellow, overall weight: 3,900 kg, maximum load weight: 12,000 kg, Year of construction: 2010, operating hours: 1 h, number of axes: 2, FIBO B1200 on chassis – recently overhauled The compact and mobile concrete mixing plant FIBO B1200 impresses with its high performance, short setup times, and reliable concrete quality. Thanks to its integrated chassis, the plant can be used flexibly – ideal for construction sites, concrete plants, agriculture, precast concrete production, or temporary production sites. ✅ Recently overhauled – in excellent technical and visual condition ✅ Silo & cement screw conveyor completely new (optional) ✅ Ready for immediate use Technical features: Mixing capacity: up to approximately 10–20 m³/h (depending on the mix design and operating mode) Chassis for easy transport and quick relocation Control system for automated batching High repeatability and consistent concrete quality Robust design – ideal for continuous and construction site operation Side wall extensions for increased volume in the aggregate hopper High-pressure cleaner permanently installed Admixture pump New price: CHF 230,000.- Isdszcrbwjpfx Apcsig Advantages: No complex foundation required Very fast commissioning (production can start 1/4 hour after unloading) Low operating costs Ideal for small to medium concrete volumes The plant is perfect for companies that want to produce concrete in a mobile, flexible, and independent manner. Condition: Complete overhaul performed (documents available) Including electronics and control system Silo NEW (optional) Cement screw conveyor NEW (optional) Technically inspected and fully operational Upon request, inspections, test runs, and transport can be arranged.

Condition: used, Year of construction: 2013, functionality: fully functional, total height: 2,322 mm, total width: 1,154 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 1,315 kg, usable tank capacity: 320 l, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, Equipment: type plate available, Due to the closure of our facility, we are offering our fully functional, double mixing system for sale. This system was used until recently in active production. It was primarily used for the manufacture of high-quality epoxy resin systems. Scope of the offer (package sale): 1x Vacuum double planetary mixer (consisting of two identical planetary mixers) 4x Mixing vessels (compatible with the system) 1x Dispensing device Technical data: Manufacturer: Herbst Maschinenbau Model: HRV-S400DP Iiodpfszv Rqpex Apcsg Machine type: Vacuum double planetary mixer Last application: Production of epoxy resin systems Container volume: 320 l depending on the material / 400 l container total volume Drive power / connection values: see TDS in the appendix Condition & History: Used, fully functional, shows typical signs of wear and tear due to age and use. Processing, inspection & dismantling: Possible on short notice after prior arrangement. Availability: Immediately. Dismantling & removal: To be carried out independently by the buyer after prior consultation on site. Additional documents: Operating manual If you are interested or have any questions, please do not hesitate to contact us!

Condition: used, Langheinz Aquamix 32 water mixing and dosing unit Fully automatic water mixing and dosing unit with three inlets, demand-controlled supply, and a numeric keypad. Condition: new seals, dirt filter, and battery. Maintenance performed. For connection to the drinking water network Intrinsically safe according to DVGW For mixing and dosing of ice water, mains water, and hot water With a switchable, automatically controlled supply Repeat and partial repeat function Numeric keypad 0-9 Housing material: AISI 1.403 With 3 water temperature inlets Iiodpfez A Sn Hjx Apceg

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2017.041.XM.400.004, space requirement length: 6,700 mm, space requirement width: 3,200 mm, space requirement height: 5,000 mm, This is a combination of a hot mixer and a cooler. A typical application is mixing polymers with additives. Ijdpfx Apozl Td Rjcoig Hot mixer: working volume of 400 liters, drive power 90 kW, mixing impeller with a tip speed of up to 60 m/s. Vacuum system included (but needs optimization). Filling hopper included. Gravimetric scales for the additives are not included in the delivery. Cooling mixer, volume 1200 liters with a 11 kW drive, cooling jacket for cold water flushing, outlet with a valve. The combination includes the entire steel structure with walkways, control cabinet with frequency converter (400 VAC/50Hz) for the variable drive of the hot mixer. Additional documents can be provided upon request. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, FOR SALE: COMPLETE ELBA EMC 38 READY-MIX CONCRETE PLANT – 2007 – 4 FRACTIONS – 2 × 50 T SILOS – PLC CONTROL For sale is a complete ELBA EMC 38 ready-mix concrete plant, manufactured in 2007. The equipment is sold as a complete technological system, including a 4-fraction batching system, a conveying belt system, 2 x 50-ton cement silos, automatic PLC control, and a control/office container. TECHNICAL DATA AND EQUIPMENT: • Manufacturer: ELBA • Type: EMC 38 • Year of manufacture: 2007 • Horizontal-shaft mixer with bevel gear drive • Mixer capacity: approx. 0.5 m³ / 500 liters per mixing cycle • Nominal operating capacity: approx. 38 m³/hour • 4-fraction batching system for aggregates • Conveying belt system • 2 cement silos, each with a capacity of 50 tons • Refurbished cement silos • New silo filters • New safety/overpressure valves • The mixer lining is in new condition and very good condition • Automatic PLC control • Control/office container included in the purchase price DISMANTLING, LOADING AND TRANSPORT: The ready-mix concrete plant is sold in a dismantled condition. During dismantling, electrical cables and connections will be marked to ensure that the equipment can be reassembled and electrically reconnected in its new location as clearly as possible. The seller will arrange for the equipment to be loaded onto the buyer’s provided transport vehicles. The organization of transport, the provision of suitable transport vehicles, and all transport costs are the responsibility of the buyer. The equipment is sold in the condition documented in the photographs and with the equipment detailed above. Additional detailed photos, technical information, and videos are available upon request. Iedpez Db Tzofx Apcoig Location: Hungary Purchase price: 120,000 EUR + VAT

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Iijdpfozarw Hsx Apcog Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Additives weighing: 30 kg Water weighing: 250 kg Cement silo is optional. COMPACT-60 consists of: • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 1999, operating hours: 13,300 h, * Bitelli SF 200 asphalt milling machine * Year of manufacture: 1999 * Operating hours: 13,000 h * MB engine * Milling width: 2 m * Hydraulic folding conveyor belt * Weight: 29,000 kg Iodpfxszm Epbe Apcoig * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Iisdpszhnlzofx Apcsg Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: good (used), Tourell Gardner 1500L mixing vessel Stainless, 1500L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge into a Waukesha lobe pump 4.0Kw, 3Ph Iijdpfx Apoz Ak Twocsg

Condition: good (used), Tourell Gardner 700L mixing vessel Iijdpoz Ak Uzsfx Apceg Stainless, 700L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge, 3Ph

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. Iiedozarv Nspfx Apcsg COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!