Used Microstep Mg 6001.25Prgb for sale (930)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dodjzv N Hpepfx Albokt Dust extraction system: Donaldson Torit DCE

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg Dkedpfjzwl Dmsx Albot MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Application Types Cutting Dkjdpjx D Hz Hjfx Albst

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Dedpfx Alewmqwyjbjkt

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 Dodpjwhk E Hsfx Albekt AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, number of axes: 3, Plasma cutting machine manufactured in 2007. This MicroStep SPLR-P features a Kjellberg HiFocus 160i PLUS plasma power source, offering a cutting current range of 10A to 160A. It includes an integrated CNC operator terminal for precise control and a filtration system by Donaldson Torit DCE. If you are looking to get high-quality plasma cutting capabilities, consider the MicroStep SPLR-P machine we have for sale. Contact us for further details. - Voltage (Sp.): 400 V 50/60 Hz- Power Rating: 3 kW- Plasma Power Source Brand: Kjellberg Finsterwalde- Plasma Power Source Model: HiFocus 160i PLUS- Plasma Power Source Serial / Art. No.: Art.-Nr. 11.033.702 / 07057- Plasma Power Source Specifications: - Open Circuit Voltage (U0): 330 V - Mains Voltage (U1): 400 V (3~ 50 Hz) - Max Current (I1max): 47 A - Effective Current (I1eff): 47 A - Power / Pressure: P1/min = 0.7 kW, Pmax = 0.5 MPa - Cutting Current Range: 10A / 84V - 160A / 144V - Duty Cycle: 100% at 160A / 144V; 100% at 25A / 90V - Power Source Mass: 196 kg - Protection / Insulation Class: IP 22, . F - Cooling Type: AF- Gas Console / Control Units: Kjellberg PGC and PGV 1- Torch Systems / Cutting Heads: - 1x Plasma Cutting Head - 1x Oxy-fuel / Flame Cutting Head- Control Console: Integrated CNC operator terminal with keypad and display- Filtration / Dust Extraction System: Donaldson Torit DCE Dodpfx Alszzav Ejbjkt

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-4000-CUT, We offer this repair-required VIRS MSF 3001.15L laser cutting machine, year 2017. Manufacturer: Microstep / VIRS Model: MSF 3001.15L Year of manufacture: 2017 Modules 1, 4, and 5 automatically lock immediately after cutting and require unlocking by IPG. Half of the 2 kW power is available. Djdey Ri Tuepfx Albekt If you have any additional questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2652-1192652, travel distance X-axis: 4,000 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 40,000 m/min, feed length X-axis: 4,400 mm, feed length Y-axis: 2,400 mm, feed length Z-axis: 250 mm, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 40,000 m/min, controller manufacturer: CNC, workpiece length (max.): 4,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 230 mm, workpiece diameter (max.): 2,000 mm, total length: 7,516 mm, total width: 3,476 mm, table width: 2,450 mm, table length: 4,500 mm, overall weight: 9,280 kg, Equipment: documentation/manual, Good day, we are offering a fully functional 5-axis waterjet cutting machine. The machine also includes a collector for used abrasive material. A 1-year compressor with warranty, 5 tons of abrasive material, and spare parts are included in the price. If you are interested, the machine is available immediately. Djdpfxszgu Akj Albekt

Condition: ready for operation (used), Year of construction: 2016, MicroStep Master Cut Eco Plus CNC plasma cutting system with nesting software Year of manufacture: 2016 Power source: Kjellberg HiFocus 161i Provision for retrofitting an oxy-fuel torch including Kemper filter system Dkodpszpf U Nofx Albot Maximum working area: 3000x1500mm Machine location: Hall in Tirol Immediately available

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC oxy-fuel cutting machine in very good condition, lightly used. Dedpfxszhby So Albjkt

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 403/05, table length: 3,000 mm, power of the servo motor: 1,500 W, table width: 1,500 mm, Equipment: double-sided, With plasma cutting system HyperTherm Powermax 1100 and air drier M.T.A. DE009 Machine was used in the production of ventilation ducts and fittings. AsperWin (base program for operating CNC machine for Windows. Dxf-files can be imported) Dsdpfx Aew I D Iaolbokt Asper Nesting (enables effective creation of nests with a big number of different cut parts to achieve best possible utilization of material with minimum waste) and Air Select (for ductwork manufacturers enables fast and comfortable design of HVAC components).

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Refurbished in 2026. Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Dkedpfxswinpxj Albot Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts black steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected while in operation in Vilnius.

Condition: used, Year of construction: 2010, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 50 mm, sheet thickness aluminum (max.): 35 mm, overall weight: 4,000 kg, working width: 2,000 mm, travel distance X-axis: 6,000 mm, type of cooling: air, Equipment: documentation/manual, Used MicroStep flame cutting machine (plasma system) SPL 6001.20 P with Kjellberg torch. Used, fully functional. Extraction system included. Video demonstrating the machine in operation is available; please contact us if you are interested or have any questions. Price negotiable. Dksdpfozr D Hpex Albst

Condition: used, Year of construction: 2015, CNC laser cutting system, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Dsdpfx Alszhtp Ejbekt Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: - Cutting system, - IPG fiber laser source, - HIGHYAG cutting head and - KEMPER extraction system. Laser IPG Ytterbium Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W IPG air-water chiller for cooling Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm with a 200 µm fiber optic Weight: approx. 6.2 kg Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Testing: IFA-tested, welding fume class W3 (high-alloyed steels) Availability from 10/2026 Reference No.: C2177 22726

Condition: used, Year of construction: 2013, machine/vehicle number: 0602-260025, The MicroStep MasterCut Compact P 6001.20 is a compact and powerful CNC plasma cutting system designed for the precise processing of sheet metal on a work surface measuring up to 6,000 × 2,000 mm. The gantry-style system is equipped with a Kjellberg HiFocus 161i fine plasma torch, an automatic gas console, and Contour Cut Speed technology. Maximum positioning speed of 35,000 mm/min. Dkjdpfjzq E A Aex Albet

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Dksdpfsy Nd Hyex Albjt Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: like new (used), Year of construction: 2023, operating hours: 1,400 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, For sale: MicroStep WaterCut 2001.30W waterjet cutting machine in perfect condition, manufactured in 2023. The machine is equipped with a BFT Ecotron 40.37 high-pressure pump – 4000 bar and 37kW – one of the top-performing and most reliable pumps on the market. Key specifications: - Working area: 2000 x 3000 mm - Cutting head: 3-axis with anti-collision sensor - Total working hours: approx. 1400 h The machine is sold as a complete, ready-to-run package, including: - 1-ton abrasive feeder (Allfi) - Automatic sludge removal system (tank cleaning system) Dkodjy Ecr Hspfx Albet This configuration allows you to begin production immediately without additional investment. The machine is available for immediate delivery.

Condition: used, Year of construction: 2014, Plasma cutting machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of manufacture: 2014 Operating hours approx.: 7,024 Control system: iMSNC Working area: 3,000 x 2,000 mm 1 Plasma torch power source Kjellberg HiFocus 280i neo with universal gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access via TeamViewer 15 m hose package Without fume extraction 1 x nesting software Asper Win Basic + automatic nesting Dsdpfjypdl Iox Albekt on the machine control system 22726ä Universal gas = enables changing the gas to adapt the cutting quality and cutting speed to the material.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Year of construction: 2006 Working area: 6,000 x 2,000 mm Incl. 500 mm pipe shaft for pipe and beam processing 1 x plasma cutting system Kjellberg HiFocus 160i with automatic gas console Cutting range steel up to 30mm, exchangeable head Dkjdporurraefx Albjt Manufacturer's data sheet: Kjellberg HiFocus 160i 2 x oxyfuel cutting torches up to 150mm Support table, extraction table 2,000 x 6,000 mm Shaft for processing pipes and profiles (without pipe cutting device) Complete gas supply with pressure reducer MMI console with 15″ touchscreen Machine control: MicroStep MSNC500® (based on Windows XP) Software: MicroStep CAM AsperWin Basic® Version 3.2 Spare parts and spare parts cabinet for plasma and oxy-fuel torches Filter system: Donaldson DFPRO 6 with existing feed pipes

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma cutter with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Dodpoy Auxmsfx Albjkt Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control ä22726

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Maximum permissible sheet metal thickness: 100 mm MACHINE DETAILS Operating hours Machine running hours: 5,400 h Cutting hours: 590 h EQUIPMENT Power source: Hypertherm Powermax 65 Pin marker TEKA filter system Dksdpjzc Euqsfx Albjt Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000 - 5,000 Laser power: 2.5 kW Dkodpsx Eh Drefx Albot Working area: 3,000 x 1,500 mm Sheet metal thickness, steel (max.): 15 mm Sheet metal thickness, stainless steel (max.): 8 mm Sheet metal thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20°C) Extraction duct (left and right): outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser cooler: LC 170.01-A.3.5 Voltage: 400 V / 3-phase / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 3826

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle Dodevw Tdljpfx Albskt • Powerful Donaldson DFPRO 6 filter system with 7.5 kW Technical specifications: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Transverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Acceleration Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% EX-TRABEAM® Pro laser cutting head Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical specifications: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic drilling tool measurement Pneumatic hold-down device Brush For removing drilling chips Donaldson® DFPRO 6 Cyclopeel filter system Fan power: 7.5 kW Flow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With witt Gas Mixer Machine has always been operated under a maintenance and support contract

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. MasterCut Compact 3001.15P/Me Approx. 3,000 x 1,500 mm Sturdy construction Up to 100 mm material thickness High-quality linear guides and backlash-free drive on both sides Digital, maintenance-free AC servos with IRC Up to 40,000 mm/min IRC 2500 (incremental encoder) • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table Dksdpjycvq Aefx Albst • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control Dedpfxog N Nlvo Albekt 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming