Used Mez Af344/4A for sale (1,087)

Condition: good (used), Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 22 x 50 mm -Design: B5 -Protection class: IP 44 -Dimensions: 365/290/H250 mm Ljdsd Hui Tspfx Ab Aoru -Weight: 37 kg

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm Lrjdpjyzzh Ejfx Ab Asu dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: used, functionality: fully functional, - Manufacturer: MEZ Frenštát p. Radh. Lrodpfx Abexa Evzo Asu - Type: F200 - Motor power: 30 kW - Single-shaft design - Max. height of processed material: 120 mm - Min. length of processed material: 2 m

Condition: used, Separating clutch, controllable gear motor, variable speed gear motor, electric motor -Rapid traverse: for lathe Gearbox manufacturer: SITI type MI 60 FP -Motor manufacturer: MEZ type 4AP71-4 -Motor power: 0.37 kW -Speed range: 1-100 rpm -with control: -Brake and clutch: 24 V -Drive shaft: Ø 28 mm Lrjdpfx Abjd Erwks Asu -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 510/400/H270 mm -Weight: 35 kg

Condition: used, Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 4AP90s-4 -Power: 1.1kW -Speed: 1410 rpm -Shaft: Ø 24 x 50 mm -Protection class: IP 44 -Dimensions: 290/175/H210 mm -Weight: 12.3 kg Lodpfsibbqrox Ab Ajru

Condition: good (used), Three-phase motor, electric motor -Power: 2.2 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 54 -Number: 4x available -Price: per piece -Dimensions: 420/320/H225 mm Lsdsdzzh Uepfx Ab Aoru -Weight: 41 kg

Condition: excellent (used), functionality: fully functional, Electric motor 90 KW - 1480 rpm Lredpfx Abjucwu To Aeu 380 Volt. Gated motor.

Condition: excellent (used), Year of construction: 2012, CNC turning and milling center Gildemeister CTX Beta 1250 4A with Sinumerik 840D Shopturn Year of manufacture: 2012 Program running hours: approx. 20,000 hours GEARING OPTION ACTIVATED Technical data: Main spindle speed: Drive power: 32 kW ISM 102 Counter spindle speed: Drive power: ISM 76 Y-axis slide 1 Driven tools 1x12 on slides 1+2 Bar loader package Workpiece gripper can be used on both main and counter spindles Coolant system Ljdpjyfcrrjfx Ab Aeru Chip conveyor

Condition: used, Electric motor, three-phase motor -Power: 1.5 kW -Speed: 710 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 420/320/H225 mm -Weight: 41 kg Lededzzh Tjpfx Ab Aoru

Operating hours: 7,209 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,400 kg Lifting height Lifting height: 1,844 mm Forks Fork length: 1,150 mm Battery Battery type: Lithium-ion Battery voltage: 24 V Battery capacity: 410 Ah Measured idle voltage: 25.5 V Operating data Operating hours: 7,209 h MACHINE DETAILS General Manufacturer: Linde Type: L14AP Year of manufacture: 2022 Own weight: 1,400 kg Dimensions Overall length: 210 mm (?) Overall width: 800 mm Overall height: 1,490 mm Inspections and service Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 EQUIPMENT Folding platform Lithium-ion battery Charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 464 Lredpfx Absz R Rfpo Asu

Condition: excellent (used), functionality: fully functional, HUGHES Industrial Corn Husker – Stainless Steel HUGHES industrial corn husker, designed for the automatic removal of leaves and outer husks from corn cobs within industrial vegetable processing lines. The equipment allows for the continuous performance of one of the main corn preparation operations, significantly reducing the need for manual husking and providing a steady flow of cobs to the next processing stages. Its husking system, which uses husking rollers, allows for the progressive gripping and removal of leaves as the cobs move through the machine. MAIN FEATURES -Manufacturer: HUGHES -Type: Industrial corn husker -Application: Corn cobs -Function: Husk removal -Automatic and continuous processing -Husking system using rollers -Multiple processing rollers Lredpfx Aowny Nhob Aou -Continuous cob feed -Controlled product transport -Separation of leaves and product -Robust industrial construction -Components and structure primarily in stainless steel -Top access for inspection and maintenance -Guards on moving parts -Designed for industrial corn processing lines -Integrable with upstream and downstream equipment PROCESS The HUGHES husker receives the cobs with their outer leaves and distributes them onto the processing area. As they move forward, the cobs come into contact with the husking rollers, whose mechanical action allows the leaves to be gradually gripped and separated from the surface of the product. The removed leaves are separated from the main flow, while the husked cobs continue to the next stage of the line. It can be integrated with: Cob receiving systems Conveyors and elevators Inspection tables Washers End trimmers Corn shellers Blanchers and cookers Cooling systems IQF freezing tunnels Packaging lines APPLICATIONS Especially suitable for industrial processors of sweet corn, canneries, frozen vegetable manufacturers, and fruit and vegetable processing plants that need to automate cob preparation. The combination of HUGHES technology, a continuous roller system, and industrial construction provides a particularly interesting solution for sweet corn production lines for canned, frozen, or further processed products. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: VT0479, VC850 travels: X850, Y510, Z510 mm High-performance milling spindle up to 12,000 rpm as a built-in hybrid spindle with direct drive, without belt Tool holder on spindle SK40 DIN69871 with pull stud DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in X/Y/Z axis SIEMENS 840DE control with the following basic features: - SPINNER - SPIOS 24" touch panel for I4.0 applications - Control panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard In the latest generation of SIEMENS "SINUMERIK ONE" control - SPINNER - SPIOS 24" touch panel for I4.0 applications - Control panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard Lrodpfsy S Tpisx Ab Asu SPINNER MULTI-CONTROL-WHEEL on the control panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the block -> all important functions of the setup mode integrated into one control element - SHOPMILL - 3D SIMULATION - REMNANT MATERIAL RECOGNITION - DXF reader Fully integrated 1-axis TILTING TABLE, centrally mounted in the working area on the table, with: - Pivoting cheek approx. 580mm long for 3-sided machining - Swivel range of the A-tilting axis is infinite - Counter bearing to support the rotary table bridge UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for the use of the additional tank up to 22 bar HIGH-PRESSURE TANK 22 bar Additional compressed air on the spindle head Compressed air centrally through the milling spindle, alternatively to coolant nozzle in the working area PREPARATION FOR SPINNER STANDARD MEASURING PROBE Wireless SPINDLE PROBE universal robot interface UNIROB CLAMPING HYDRAULICS incl. 2 pcs. 4/4-way VALVE for workpiece clamping up to 200 bar hydraulically STANDARD DOCUMENTATION GERMAN consisting of machine manual and CNC manuals is supplied in digital form on the control. Paper manuals available at an additional cost LIFTING LUGS for crane unloading, set consisting of 4 pcs. mandatory for crane transport STANDARD PAINTING two-tone in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images are not necessarily images of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are only included in the scope of supply to the extent listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: like new (used), Year of construction: 2006, operating hours: 671 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. Lrjdpozxz Dfefx Ab Aou I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, load capacity: 7,000 kg, Bale clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Lrjdpfx Ajzz Ea Aeb Aju Condition: Ready for use and fully functional Technical condition: good Description: ISO 4A (61 cm) Capacity 7000 kg Opening range 675-3320 mm Width 2250 mm Clamps 1800 mm ID OS2092

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° Lsdeu Ndcmspfx Ab Aeru quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: used, mileage: 860,250 km, power: 176 kW (239.29 HP), first registration: 07/1989, fuel type: diesel, axle configuration: 3 axles, color: other, gearing type: mechanical, Year of construction: 1989, LICENSE PLATE: PG628274 TITLE: IVECO 175/24 WITH LEAF SPRING FRONT AND REAR SUSPENSION, 6X2 REF: 24C13 YEAR: 07/1989 HORSEPOWER: 240 DISPLACEMENT: 9498 EURO STANDARD: 0 KM: 860250 GEARBOX: manual DIFFERENTIAL LOCK: yes RETARDER/INTARDER: no AXLES: 3, 6x2 WHEELBASE: 4700 TOWING: no ORIGIN: Italy CABIN: low with sleeper NUMBER OF SEATS: 2 PAYLOAD: 14400 kg - TRACTOR UNIT: 24,000 kg at full load - TRACTOR UNIT + TRAILER: BODY TYPE: chassis TOTAL LENGTH: 9.65 m ACCESSORIES: - REFURBISHED: no INSPECTED: TIRES: 20% PRICE: 3,000.00 € + VAT. Errors and/or omissions excepted. The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile Ljdozzgf Hspfx Ab Ajru SCARRABILI AURORA operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specializing in trucks, trailers and hooklift equipment. With a readily available fleet of over 50 trucks and over 150 bodies, containers with and without hooklift cranes. S.E.&O Due to the amount of information and details included, Aurora invites you to verify the accuracy of the data with the sales staff.

Year of construction: 1989, condition: ready for operation (used), Center height: 150mm, center distance: 800mm, max. grinding length: 400mm, table dimensions X/Y: 1245mm/200mm, grinding spindle diameter: 80mm, grinding spindle length: 400mm, workpiece carrier: ISO50, spindle speed: 8000rpm. Documentation available. An on-site inspection is possible. Lsdpfx Aboy D Tp Ts Aoru

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, FEELER VMP-1100 CNC Vertical Machining Centre with NIKKEN CNC202 FA 4th Axis Year 2012 Control FANUC 0i-MD Table size 600 x 1200 mm Travels XYZ 1100 x 610 x 600 mm Spindle nose to table 137 - 735 mm Spindle centre to column 660 mm Spindle speeds to 10000 rpm Spindle taper BT 40 Spindle motor 18.5 kW Number of tools 30 ATC Rapid traverse X & Y 36 m/min, Z 24 m/min Weight 6800 kg Supplied with: BLUM Tool Probe, Swarf Augers, Rear Swarf Conveyor, Spindle Chiller, Filtermist FX5002, Tooling Package. NIKKEN CNC202 FA 4th Axis complete with 200 mm Diameter Faceplate, 135 mm Centre Height, 115 mm Riser Block, Tailstock and Mounting Sub Plate/Table. Lredpez R Tn Hjfx Ab Aeu For sale with Jet Machinery Ltd Jet Machinery Stock No: #27003 Machine Serial Number: VNJ1074 Cost: £34,950.00 + VAT

Condition: used, empty load weight: 8,680 kg, maximum load weight: 31,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2018, suspension: other, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, ABS, widening with warning signs, vehicle is sold on behalf of., , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Lrsdpfx Abj Aawkhj Aeu

Condition: used, empty load weight: 8,680 kg, maximum load weight: 31,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2018, suspension: other, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, ABS, widening with warning signs, vehicle is sold on behalf of., , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Lrsdpo Aa N Npofx Ab Aeu

Condition: ready for operation (used), Year of construction: 2019, operating hours: 21,000 h, clamping force: 1,270 kN, total width: 1,500 mm, total height: 1,700 mm, overall weight: 5,300 kg, product length (max.): 5,100 mm, This 3-axis SHIBAURA EC130SXIII-4A was manufactured in 2019. It features a clamping force of 1270 kN and a mold opening stroke of 400 mm. The machine has a maximum distance between platens of 950 mm and platen dimensions of 720 x 670 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC130SXIII-4A electrical injection moulding machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 510 x 460 mm • Platen dimensions (H x V): 720 x 670 mm • Mold opening stroke: 400 mm • Max. distance between platens: 950 mm • Mold height (min–max): 180–550 mm Ledpfx Asy Iffnsb Asru • Ejection force: 30 kN (3.0 tf) • Ejection stroke: 90 mm • Injection unit code: 14 • Nozzle touch force: 17.7 kN (1.8 tf) • Injection speed (standard): 300 mm/s • Injection speed (high torque): 200 mm/s • Injection speed (high speed): 400 mm/s • Main breaker capacity (standard/high torque): 100 A • Main breaker capacity (high speed): 125 A • Transformer (standard): 75 kVA

Condition: used, Year of construction: 1986, machine/vehicle number: 2204-0929, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled tool milling machine Condition: good Machine weight: approx. 2.8 t Travel distances X-axis travel: 560 mm Y-axis travel: 500 mm Z-axis travel: 450 / 390 mm Arbor stroke: 80 mm Work table Table clamping surface: 800 × 460 mm Spindle and milling head Spindle speed: 40–4,000 rpm Spindle connection: ST 40 Swiveling spindle head: ±90° Vertical head: rotatable ±90° Horizontal spindle: available Feed rate Feed rate: 2–3,600 mm/min Feed axes: 3 axes Control system Control system: Contour 2 Performance data Total power consumption: 4.0 kW Dimensions Space requirement: approx. 2.0 × 2.5 × 2.2 m Lrsdpfx Ae Aa Aursb Aeu EQUIPMENT Hydraulic tool clamping Mobile control panel Machine lighting Automatic central lubrication Coolant system Safety emergency stop Chip tray Separate control cabinet

Condition: good (used), Year of construction: 2018, Manufacturer: Seydelmann Model: K324AC8VA Year: 2018 Condition: Used Lredpfez S Ilbox Ab Aou Serial number: S8-00324-0256-18 Stock number: 3328 Bowl: 325 liters, 2 speeds Knife speed: 6 variably adjustable speeds Mixing: 2 mixing speeds, reverse Control: Auto-Command 1500K Vacuum pump: Elmo Rietschle L-BV5, 200 m3/h Compressed air: 6 - 10 Bar Water: 4 - 6 Bar Power: 3 x 400V, 50Hz, 157kW Dimensions: 2600 x 3650 x 1700 mm Weight: 4300 kg Includes ejector and BW200 lift. With water meter.

Condition: used, color: other, Year of construction: 2020 Operating hours: 2.188 Drive: Track Power internal combustion engine: 624 HP (459 kW) GVW: 8.425 kg Lsdpfxow Hy R Nj Ab Aeru Make of engine: Kubota CE mark: yes Serial number: 70409 Machines for Sale Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Heidelberg SM52-4 Anicolor approx. 42 million impressions straight print 4+0 Alphatronic 200 powder CPTronic Lsdpfxe Aaxbnj Ab Asru in production