Used Mehrer Avt55 - 2.2-350 Hm for sale (9,635)

Condition: used, Year of construction: 2002, Technical details: pressure capacity: 10 bar tank: 350 l motor: 2 x 2,2 kW volume capacity: 2 x 275 L/min weight: 555 kg total power requirement: 2,2 kW dimensions L x W x H: Kompressor: 2,7 x 1,0 x 1,55 m pressure vessel: Größe: L:2,4 x Ø 450 m compressor is free of oil and with noise reducer insulation consists of : 2 compressor - each 3 cylinder Besteht aus: Air pressure tank: - Make Mehrer - Permissible operating pressure 11 bar - YOM 1995 Exhaust air over 1 1/2 "reduced to 1", hose connection Ø 14 x 27 mm with shut-off valve Operation via control panel Permissible operating temperature 50 ° C Cjdpeu Nz Slofx Ailorh i.D. *

Year of construction: 2000, condition: used, Punching machine Premium quality HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm² Codpfx Asg Dgyxsilsrh

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133477-100, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 1,735 bar, injection weight: 183 g, mold height (min.): 250 mm, ejector stroke: 140 mm, opening stroke: 500 mm, plate length: 670 mm, plate width: 670 mm, total length: 4,500 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 4,500 kg, heating capacity: 11.4 kW (15.50 HP), pressure: 275 bar, pump power: 18,500 W, power: 38 kW (51.67 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 80 A, Model: HM 110/350 UNILOG B6E Machine No.: 133477-100 Year of construction: 2011 Weight: 4500 kg Crjdpfxsyw Udxo Ailoh Hydraulic system pressure: 275 bar Wiring diagram No.: HMB6E133477-100 Largest motor FLA: 33.4 A Control voltage: 24 V DC Electrical: 400 V, 80 A

Condition: excellent (used), Year of construction: 2011, first registration: 08/2011, Equipment: ABS, Mercedes CLS 350 AMG, Sail edition Year of manufacture: 06/2011. The vehicle has a completely new rear axle with nine supports, a new turbocharger, the automatic transmission has been flushed and all filters have been replaced, as well as new brakes and a new front spoiler. It has undergone a face-lift! Approximately 20,000 euros have been invested in the vehicle; it runs perfectly and has a lot of power! You are welcome to take it for a test drive with me and see for yourself! Oh yes, it has 322,500 kilometers, but it is in excellent condition! It can easily handle another 300,000 kilometers! Fuel consumption: 5-12 liters of diesel! Cedpsd Tt Amofx Ailjrh If you have any further questions, please do not hesitate to contact me! Thank you in advance!

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Codok Rnq Njpfx Ailerh Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: used, Year of construction: 2017, zpracování slabé hmoty - délka výřezů od 1300 - 4500 mm - průměr kmene od 130 - 350 mm - 100 m3 / směnná výroba - celkový příkon 230 kW. ​Vyhledat podrobnosti 137 / 5 000 Výsledky překladu Výsledek překladu processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW. Crsdpfjnqzkpjx Ailsh

Year of construction: 2017, condition: used, processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm Crsdpsnwm R Nsfx Aileh - 100 m3 / shift production - total input 230 kW

Condition: ready for operation (used), Year of construction: 2003, operating hours: 77,890 h, functionality: fully functional, clamping force: 1,274 kN, screw diameter: 40 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 130 t Tie bar distance: 420 mm x 420 mm Screw diameter: 40 mm MACHINE DETAILS Crsdpfx Asy Ewpmsiloh Operating hours: 77,890 h Note: When purchasing multiple items from the same location (see offers below), the lower applicable costs for dismantling and loading will be granted.

Condition: good (used), Gear motor, electric motor, electric gear motor, worm gear motor Credpfjw H Av Usx Ailoh -Engine manufacturer: HEW type DEX100L/4K -Manufacturer gearbox: KEB type G22A EX.001 -Speed: 350 rpm -Power: 2.2 kW -Shaft: Ø 25 x 50 mm -Protection class: IP55 EX -Dimensions: 700/250/H310 mm -Weight: 60 kg

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Crjdpfx Aiez A Ubieljh Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: excellent (used), Year of construction: 2003, Battenfeld HM 1300/350 Year of manufacture: 2003 Clamping force: 130 tons Screw diameter: 40 mm Injection volume: 220 cm³ Tie bar distance: 52 x 47 mm Crjdpfedv Tbfex Ailsh Operating hours: approx. 79,800 hours

Condition: excellent (used), Year of construction: 2003, Battenfeld HM1300/350 Year of manufacture: 2003 Clamping force: 130 t Screw diameter: 40 mm Cedpfjxwmx Sox Ailorh Operating hours: 77,890 h Tie bar spacing: 42x42 cm

Condition: excellent (used), I am offering for sale a Tektronix DPO 4032 Digital Phosphor Oscilloscope. The device is fully functional, starts up without any issues, and operates correctly. It displays the startup screen and the measurement screen, as shown in the attached photos. The cosmetic condition is good – it has normal signs of use resulting from operation. Technical specifications: • Manufacturer: Tektronix • Model: DPO 4032 • Type: Digital Phosphor Oscilloscope • Bandwidth: 350 MHz • Sampling rate: up to 2.5 GS/s • 2 analog channels • Color LCD display • Interfaces: LAN, USB Host, USB Device, VGA, CompactFlash • Power supply: 100–240 V AC, 50–60 Hz Condition: • Fully functional. • The device starts up and operates correctly. • Sold without measurement probes and other accessories. • The set includes only the oscilloscope shown in the photos. Cjdpfx Aiezru Hmolorh

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350 Crjdpfxjd Sqrrj Ailsh Year of manufacture: 2003 Clamping force: 130 t Screw diameter: 40 mm Operating hours: 77,890 h Tie bar distance: 42 x 42 cm

Condition: excellent (used), Year of construction: 2018, Number of motors 1 Stück 0 2500 mm Control nein Hecht ES 350 single-sided glazing bead saw ----- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support Credjvpr N Ropfx Ailsh 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg Crsdsy Tn Enepfx Ailsh • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 \+ Rotary table \+ Robot wittmann W818 (Z=2500mm)

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Betriebsdruck 100 bar Zylinderduckkraft 380 kN Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Csdpfx Aoxy E Sioilorh Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Schneidmesser beidseitig verwendbar Schnittspalt einstellbar Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Cedoz Iww Rspfx Ailorh Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Csdpfx Aiez I A D Nolerh Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Condition: used, mileage: 112,552 km, power: 92 kW (125.09 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 2,186 kg, maximum load weight: 1,314 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,954 mm, brakes: other, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 7, loading space length: 2,700 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, airbag, cabin, cruise control, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, soot filter, traction control, trailer coupling, * German vehicle * Original mileage: 112,552 km * Condition: see photos * Body type: flatbed, crew cab with 7 seats * Flatbed dimensions: length = 2,700 mm, width 2,200 mm, height = 400 mm * Aluminum tailgate * Wooden floor * Tie-down points * Large storage box on the loading area * Tow hitch * Trailer load: 2,700 kg * Air conditioning * Hill start assist * Cruise control * Multifunction steering wheel * Airbags * 6-speed manual transmission * On-board computer * Bluetooth phone * Radio * ABS - ESP Crsdpezrw Iaofx Ailoh * Electric windows * Electrically adjustable and heated mirrors * Central locking with remote control * Daytime running lights * Wheelbase: 3,504 mm * Gross vehicle weight: 3,500 kg * Unladen weight: 2,186 kg * Payload: 1,314 kg If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) certificate, a new SP (safety report), or a new UVV (accident prevention regulations) certificate. You can find more trucks on our website at: [website address] We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the possibility of inspecting and testing the goods so that the buyer does not have any false impressions about the condition and suitability. Inspection and testing are possible at any time by prior appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: good (used), Bezel, setting stick, lynette Crsdpfx Ash Uhkzsileh -Manufacturer: Meuser, steady rest with coolant connection from lathe type MV SKV/2-1 -Max. passage: Ø 350 mm -Peak height: 460 mm -Technical drawing: see photos -Dimensions: 820/270/H895 mm -Weight: 160 kg

Condition: excellent (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm 11-roller straightening unit Crjdpfez I Swfsx Ailjh Roller diameter 60 mm 2 feed rollers 2 exit rollers

Year of construction: 2012, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-DT -Drive motor: Siemens 2.2 kW -Funnel opening: 620 x 350 mm -Outlet: 350 x 180 mm -Sieve: Hole size 5 mm -Dimensions: 650/630/H1240 mm Codpfsz A S Dnjx Ailsrh -Weight: 192 kg

Condition: good (used), mileage: 189,910 km, power: 315 kW (428.28 HP), first registration: 03/2013, fuel type: diesel, fuel: diesel, color: grey, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: crane, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Weights Unladen weight: 24,180 kg Payload: 7,820 kg gross vehicle weight (GVW): 32,000 kg Functionality Mast: Telescopic (4 sections) Mast length: 35.5 m Lifting capacity: 2,650 kg Superstructure make: MKG HMK T A2-A2 CE marking: Yes Condition Technical condition: Good Visual condition: Good EURO 5 L PACKAGE 430 HP DRIVE 8X4 BB WHEELBASE 510 CM LEAF SPRING SUSPENSION AXOR CAB WITH AIR CONDITIONING, NAVIGATION, CAMERA SYSTEM MANUAL TRANSMISSION MANY TOOLBOXES MKG HMK 350 TA2-A2 ASSEMBLY CRANE/ROOFER'S CRANE + JIB 4X HYDRAULIC EXTENSION + 3X MANUAL OIL COOLER FOR CRANE HYDRAULICS LARGE HYDRAULIC WINCH 2500 KG !!! 4 X OUTRIGGERS REMOTE CONTROL + UPPER OPERATION WORKING HEIGHT 35.5 METERS Crjdjyiui Djpfx Ailsh ALL HOOKS AND PULLEYS PRESENT FOLLOW US ON INSTAGRAM: GEURTSTRUCKS

Condition: used, Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, The used KONDIA HM-1060 high-speed vertical machining center is a medium-sized, numerically controlled machine with a cast iron gantry structure, weighing approximately 7,300 kg. It has travels of X 1,000, Y 600, Z 510 mm, a table size of 1120 × 600 mm, and a load capacity of 660 kg, with rapid traverse rates up to 24 m/min. It features a cast iron structure with support on 3 points for improved thermal compensation, a SELCA 4045 CNC control with a color LCD, a network interface, a hard disk, and a BT-40 spindle at 10,000 rpm, cooled by a dedicated chiller. It also includes an 18-position pick-up tool changer, a remote handwheel, and a conveyor chip evacuator. Csdpfx Aisz I Dvaelorh Year of manufacture: 2006, complete with manuals and certification.