Used Megamat Gmbh Paternoster for sale (69,988)

Condition: used, Year of construction: 1991, Number of shelves: 10, three-phase mains connection: 380V, N/PE, frequency: 50Hz, duty cycle: 40%, supply fuse rating: 6A, rated power consumption: 1500W, an on-site inspection is possible. Dedpfxszzqcij Albowb

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow Dsdpfxoff Huws Albswb • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: good (used), Megamat Paternoster – 42 Trays A high-quality, space-saving automated vertical carousel system (paternoster) from the premium manufacturer Megamat. The system is in good, ready-to-use condition and is ideal for the high-density, efficient storage of small parts, tools, electronic components, or spare parts, utilizing vertical space right up to the warehouse ceiling. Technical Data & External Dimensions: Dedpfx Aozrl Dcjlbowb Manufacturer: Megamat Type: Paternoster / Vertical Carousel Number of trays: 52 units (high storage capacity and part density) Unit height: 4,900 mm (4.90 m) – fits perfectly into standard commercial warehouses Unit width: 2,660 mm (2.66 m) Unit depth: 1,300 mm (1.30 m) Smooth-running, robust chain-driven carousel operation "A complete solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more storage lifts—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, rotor length: 2,200 mm, rotational speed (min.): 58 rpm, overall weight: 30,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without massive disruptive substances. Dwedpfx Alsw Tk E Ajbob Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 2200 Drive power: 2x 110 kW (ABB) Screen basket cassette: 148 mm Control cabinet: complete with (FU-ABB) Recooler: Yes, included Working opening: 2190 x 1750 mm Filling volume: approx. 5 m³ Rotor length: 2190 mm Rotor circle diameter: 745 mm Rotor speed: 50 Hz: 58 rpm Number of rotor knives: 24 pieces Knife size, pointed knife: 145x145x47 mm Counter knife below: 6 pieces Scraper comb above: 6 pieces Hydraulic feed: 11 kW Weight: approx. 30 t Dimensions LxWxH mm: 5300 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: excellent (used), WEISS SWT 600/800 Spray and Splash Water Test System IPX3 IPX4 Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800 Machine Type: Spray and Splash Water Test System Operating Hours: approx. 755.9 h according to the display For sale is a used WEISS SWT 600/800 spray and splash water test system for reproducible testing of enclosures, electrical products, components, and assemblies against penetrating water. The test specimen is positioned on the rotating table in the stainless steel test chamber. A pivoting tube with several spray nozzles moves around the test specimen and subjects it to water from alternating directions. Water flow rate and test duration can be adjusted and monitored via the integrated control system. Technical Data: Test medium: Water Test system: Pivoting tube / Rotating table Ingress Protection (IP) tests: IPX3 / IPX4 according to DIN EN 60529 Pivoting angle: adjustable Pivoting speed: approx. 60°/s according to series documentation Test specimen table: rotatable / height-adjustable Operating modes: Manual / Automatic Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 0.6 kW Rated current: 6.0 A CE marking available Water connections: Water inlet: max. 6 bar Water outlet: without back pressure Adjustable water flow rate Flow meter Regulating valve Manometer Control / Equipment: Touch operating panel Program editor / adjustable test time Operating hours, status and alarm display Stainless steel test chamber Large transparent test chamber door Pivoting tube with spray nozzles Rotating table / Test specimen table Height-adjustable test specimen holder Water inlet and outlet Side-mounted control cabinet Siemens SITOP power supply Lenze drive component Expansion options: With appropriate additional equipment, further IP tests are possible with the SWT series, e.g., IPX1 / IPX2, IPX4K, IPX5 / IPX6 and IPX9K. The additional test equipment or high-pressure units required for this are not included in the scope of supply for this offer. Application areas: Spray and splash water testing IP protection testing Electronics and electrical components Automotive components Sensors and control units Enclosures and luminaires Quality assurance Development and testing laboratories Dimensions / Transport data: Test chamber (L × W × H): approx. 2,350 × 2,400 × 2,650 mm Without hinges / door locking: approx. 2,350 × 2,400 × 1,850 mm Weight of test chamber: approx. 650 kg Transport by forwarding agent Condition: Used Operating hours: approx. 755.9 h Optical condition according to the pictures. Scope of delivery: WEISS SWT 600/800 Spray and Splash Water Test System Pivoting tube spray device Rotating table / Test specimen table Touch control Side-mounted control cabinet Equipment according to the pictures Dsdozzk Tbepfx Albowb Availability: by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Condition: new, Year of construction: 2026, feed length X-axis: 80 mm, feed length Y-axis: 80 mm, feed length Z-axis: 60 mm, spindle speed (min.): 24,000 rpm, Perfect for: Applications in model and mold making, as well as for milling other materials – a universal powerhouse with a rapid traverse rate of 80 m/min. Materials: Plastics, composite materials such as CFRP/GFRP, model-making materials, aluminum. Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation. _____ Reference number: 1233 Availability from: approximately December 2026 / January 2027 CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Dwjdozy Updspfx Albob Spindle data: 13 kW / 10.3 Nm; 12000-24000 1/min; HSK F 63 Rapid traverse rate X/Y/Z: 80/80/60 Part dimensions X/Y/Z: 3500 x 1500 x 700 Control system: SIEMENS – Sinumerik One with hand terminal HT 2 Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length monitoring: Renishaw-TS 27 R Other: on request Year of manufacture: 2026 Condition: new

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, A used horizontal form, fill, and seal machine (HFFS) from the DEAPHS series is for sale. It is designed for the automatic production, filling, and sealing of pouches made from flat film. ### Current Machine Condition The machine is currently set up for the production of 4-side seal pouches. The machine forms the pouch directly from flat film, takes over the filling process – in conjunction with a suitable dosing system – and then automatically seals the pouch. The DEAPHS series is fundamentally modular in design and can be adapted for other pouch types and applications, depending on the existing or additional equipment, for example: Dwsdpfx Aeum R Ezelbsb - 3-side seal pouches / sachets - 4-side seal pouches - Doypack / stand-up pouches Adaptation to other pouch types depends on the format, product, and required machine components and is not part of the current setup. ### Possible Applications Depending on the dosing system used, the machine is suitable for packaging, for example: - Powdered products - Granules and granular products - Food products - Animal feed - Cosmetic products - Technical and other non-food products - Single-serve packs, sample sizes, and samples Different dosing and feeding systems can be used for different products. ### Machine Equipment - Independent film unwinding shaft - Pouch bottom sealing - Pouch bottom former - 3 horizontal sealing units - 2 vertical sealing units - Servo-controlled film/pouch feed - Mechanical pouch cut - Vacuum pouch opening - Photoelectric sensor control for printed film - LCD touchscreen display - Panasonic PLC - Servo film drive The separate film unwinding system enables controlled film tension and adjustment to different film widths and pouch formats. ### Possible Dosing Systems Depending on the application, the machine can be combined with the following dosing systems, among others: - Auger dosing - Volumetric cup filler - Multi-head combination weigher - Piston filler - Pump filler / liquid dosing, e.g., Hibar Availability and scope of delivery of the respective dosing systems can be requested separately. ### Technical Data Machine dimensions: approx. 5,500 × 1,100 × 1,400 mm (L × W × H) Net weight: approx. 2,000 kg Power supply: 380 V / 3 phases / 50 Hz Connected load: approx. 6.5 kW Air consumption: approx. 0.23 m³/min ### Installed Components / Manufacturers Components from, among others: Mitsubishi, Panasonic, Autonics, ABB, Airtac, and SMC Suitable packaging films, as well as other dosing, feeding, and peripheral equipment, can also be offered depending on the application. Inspection of the machine is possible by appointment. Further information on pouch formats, working widths, possible dosing systems, and scope of delivery can be provided upon request.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20044G, total length: 5,000 mm, total height: 2,100 mm, total width: 1,500 mm, input voltage: 220 V, power: 4 kW (5.44 HP), For sale is a used sleeve labeling machine, including a shrink tunnel and conveyor belt, taken from an industrial packaging line. The system was used for the automatic application of shrink sleeve labels to bottles, cans, and other containers and is particularly suitable for applications in the beverage, food, and packaging industries. The machine features a robust, industrial-grade design with a stainless steel housing and can be integrated into existing packaging and filling lines. Condition: The system is used and has been partially refurbished. It was last in working order. However, due to its used condition, the sale is made without any warranty regarding completeness, current control function, or suitability for a specific application. An inspection and technical assessment before purchase are recommended. Scope of delivery: Sleeve labeling machine Dwjdsxvbz Eepfx Albeb Shrink tunnel Conveyor belt Existing attachments and components as per inspection Individual sale possible: If interested, individual machine components or assemblies can also be purchased separately. Inspection possible by appointment. Further technical information, images, and dimensions are available upon request.

Condition: used, Technical details: Dedpfxsu Ng N As Albewb grinding length: - mm centre height over plate: - mm long. travel of table: 250 mm cross travel of table: 160 mm grinding spindle - swivable: ja ° adjustment of spindle-head: 160 mm grinding wheel speeds: 2850 U/min grinding diameter: 150 mm work table:: 50 x 134 x 44 mm table movement: X= 260 mm table movement: Y= 160 mm dimensions of grinding wheel: Bohrung Ø 20 mm voltage: 380 V / Hz machine weight approx.: 113 kg dimension machine approx.LxWxH: 0,63 x 0,56 x 0,64 m Grinding machine for twist drill cutting angle 30° / 40° Hole of the grinding disc Ø 20mm Adjustment path Z = 230mm manual Headstock can be swivelled 360° via radial scale Table with clamping support LxW: 270 x 100mm for clearance angle 40° and 90°, 3x clamping devices, prism 14mm, as well as test device with 12mm prism and magnifying glass 90mm adjustable Column rotatable 360° Grinding protection 2x 220V sockets *

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DATA Accuracy: from 3.0 + L/250 µm Measuring range X-axis: 3,500 mm Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Type of input current: Three-phase Equipment: Lighting, documentation/manual, nameplate available Details of the offer Description Portal measuring machine Manufacturer: Mora Type: U204-20-35-60 Measuring software: Manufacturer Gemodek, Type MS10 Control panel on wheels Measuring and evaluation unit 2 PCs, Manufacturer HP, Type XW4300/Z220 2 monitors, 19/24", Dsdpeyr Simjfx Albewb Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, W 1,000 mm, 7 drawers. Contents: Infrared measuring probe, Manufacturer Renishaw, Type PH10M, Calibration mandrel, accessories

Condition: used, Machine: Temperiertechnik GmbH SES Erhitzungsanlage Dwsdpszzpcnofx Albeb

Condition: like new (used), Year of construction: 2020, As-new drying centrifuge For drying bulk parts For stain-free drying of workpieces after vibratory finishing Dwodpfx Alezzkyhsbeb Continuously variable speed control from 700 to 1100 rpm Adjustable hot air temperature Max. batch weight 5 kg Basket: Ø270 mm x 190 mm Timer: 1–60 minutes Heating power: 2.1 kW Voltage: 230 V Dimensions: 70 × 50 × 95 cm (L × W × H)

Year of construction: 2020, condition: like new (used), As-new drying centrifuge For drying bulk parts For stain-free drying of workpieces after vibratory finishing Continuously variable speed control from 700 to 1100 rpm Adjustable hot air temperature Max. batch weight 5 kg Basket: Ø270 mm x 190 mm Dwsdpozzkw Tofx Albsb Timer: 1–60 minutes Heating power: 2.1 kW Voltage: 230 V Dimensions: 70 × 50 × 95 cm (L × W × H)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 10 m/min, positioning speed: 60 m/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 50 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. Dodpfxezzkrwj Albewb This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components.

Condition: excellent (used), Year of construction: 2016, Type BAFAG ATU 25 Dwsdpfx Aouvg Dxolbeb Power: 2 kW Material conveying device, Labotek Power: 1.1 kW PRICE REDUCTION FROM 950 TO 750 EUR!!!

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Dryer: Manufacturer: Ryser GmbH, Switzerland Type: BAFAG ATU 35 Power: 3 kW Year of manufacture: 2015 Material conveying device: Manufacturer: Labotek Dwsdpeu Rcz Djfx Albjb Type: PGT 4-I/MV/MR/P1 Model: 101501 Year of manufacture: 2016 Power: 0.4 kW PRICE REDUCTION FROM 950 TO 750 EUR!!!

Year of construction: 2011, condition: used, functionality: unexamined, US welding system with UPS 20L - Ultrasonic generator Martin Walter MW 2000 WMI - The previously installed printer is missing - One or two air hoses are leaking Dwodpfx Aljzlnb Rjbjb - A test camera is missing - Shipping is possible for an additional charge.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Dwsdporq D D Esfx Albjb Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available

Condition: new, functionality: fully functional, Year of construction: 2026, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, fume extraction, Diamond Core – Fiber laser for precise and efficient laser cutting The Eckert Diamond Core is a modern fiber laser cutting system designed for the highest demands in industrial sheet metal processing. With its powerful CNC control and an intelligent extraction system, it enables precise cuts, short cycle times, and a clean working environment – ideal for mechanical engineering, steel processing, and contract manufacturing. Dsdpewqdbaofx Albowb Highlights of the laser cutting system: ✔ Precise laser cutting – even for copper and stainless steel ✔ Energy-efficient fiber laser for economical operation ✔ Intuitive touchscreen control ✔ Robust design and low maintenance ✔ Service and technical support directly in Germany ➡ Request a quote on Maschinensucher now and take your production to the next level with the Diamond Vector fiber laser!

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SN319009703, functionality: fully functional, Completely overhauled, delivery time 3-4 weeks Chamber oven for solvent-containing materials, compliant with DIN 1539 - Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm - External dimensions (w x d x h): 1765 x 1425 x 2615 mm - Max. temperature: 250°C - Controller: JUMO Imago 500 - Approved solvent quantity at max. temperature: 250 g / 46 g - Exhaust air flow rate: 6 m³/min - Additional equipment: 1 feedthrough, e.g. for thermocouples 3 heavy-duty grid shelves Dwedozy Ihgopfx Albjb - Connection power: 26 kW - Weight: 1250 kg - Includes documentation, CE declaration - Current DGUV test report Inspection in our warehouse by appointment. Oven, industrial oven, convection oven, chamber convection oven, annealing oven, heating oven, drying oven, tempering oven, paint drying oven, solvent oven.

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request Dsdpjxbtvfofx Albowb - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Rotor line Loop1 & Loop 2, location: Trnava, Slovakia. We will gladly provide further technical documentation or detailed images upon request. Dwodpfxszy E I Dj Albeb Inspection and collection are possible by arrangement. Shipping is possible, subject to payment of costs. Subject to prior sale, errors and omissions excepted.

Year of construction: 1989, condition: ready for operation (used), Polymer storage tank Article no.: RE-HU-2019-0602-B38-e Product: Used polymer storage tank container Material: GF - UP / Leguval W 17 (glass fiber reinforced polyester resin with top layer) Manufacturer: Theodor Vanck GmbH Dimensions: diameter 2.40 x height 2.80m Volume: 12 m3 Dodpfx Aed Hgc Uelbewb Year of construction: 1989 Fabr. No .: 55163

Condition: like new (used), functionality: fully functional, empty load weight: 900 kg, maximum load weight: 5,000 kg, overall weight: 6,000 kg, tire size: 300 x 80, tire condition: 100 %, Year of construction: 2025, Water tank trailer, 5000 liters - 25 km/h, equipment: for municipalities, construction sites, agriculture - wherever water is needed on site with mounted wide-distribution spreader and spray bar with nozzles drawbar height approx. 700 mm automatic support wheel with folding mechanism PTO pump for filling and emptying additional PTO pump for operating a high-pressure cleaner Dedpfozy Dy Eox Albswb

Condition: new, functionality: fully functional, machine/vehicle number: 0700, empty load weight: 4,100 kg, maximum load weight: 50,000 kg, overall weight: 54,100 kg, axle configuration: 4x2, first registration: 09/2026, next inspection (TÜV): 09/2027, loading space length: 5,000 mm, loading space width: 2,200 mm, loading space height: 880 mm, total length: 6,000 mm, total width: 2,200 mm, total height: 880 mm, tire size: 559x356, tire condition: 100 %, maximum speed: 6 km/h, color: orange, Year of construction: 2026, Heavy-duty transport trailer with a payload of 50,000 kg on 60% of the loading area at 6 km/h. Dimensions: 5000 x 2200 x approx. 880 mm. Transport floor: 50 mm wood. Tyres: banded wheels 559 x 356, 8-wheel configuration. Steering: all-wheel steering with adjustable track and steering rod. Drawbar head at both front and rear for coupling bar. Trailer can be operated in both driving directions. Paint finish: RAL 2000. Four welded lashing eyes per longitudinal side. Accessories: double-acting wheel chock. Documentation attached in a box on the frame. Reflectors on three sides. Towing bar 2000 mm with anti-fall safeguard and height adjustment. Dwedpfx Aeyq Rr Rjlbeb