Used Mechanisation For Planer And Moulder for sale (10,586)

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm Tsdpfxsvbtps Amyea

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, roll diameter: 60 mm, total width: 6,200 mm, total length: 3,000 mm, total height: 2,000 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, travel distance Y-axis: 1,200 mm, transport height: 2,200 mm, transport length: 6,200 mm, transport width: 2,400 mm, input frequency: 50 Hz, power of the servo motor: 3,500 W, Destacking device and feed table for four-side planners Fully automatic destacker and feed table Designed for sawing 2-edged and 4-edged cant Tjdpfev H R Dhjx Amyja Productivity - 120 m3 per shift (10 hours) Complete set: destacking device, feed table

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Tjdpjg Atrvofx Amysa

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Complete factory equipment for sale: weaving, embroidery, dyeing, finishing, and processing. Many more machines are available. Textile Department * Jacquard Weaving: 11 × Picanol looms, Model 2004, XC 870 (Belgian) * Air-Jet Jacquard Weaving: 8 × Picanol looms, Model 2004 XL Tedpfsziz Dyjx Amyea * Air-Jet Jacquard Weaving: 6 × Picanol looms, Model 2004, 5400 Jacquard Bonas, Jumbo * Complete set of air compressors, dryers, and air tanks required for operating the weaving machines. * Dobby Weaving: 4 × Picanol Omni looms, Model 1999 * Air-Jet Dobby Weaving: 8 × 2004 looms, 2.5 m working width, suitable for producing linen, gabardine, and dress fabrics (Picanol Omni Plus) * Rapier Weaving Machines (Chinese): Model 2014 – 4 units * Modern Warping Machine: 720 / 11 cones – 1 unit * Karl Mayer Weaving Machines: Model 2021 – 4 units * Karl Mayer Weaving Machines: Model 2017 – 2 units * Sizing Machine: 3 units ⸻ Embroidery Department * Saurer Epoca Embroidery Machines: 4 machines, equipped with 5 special attachments * Spooling/Winding Machines: Belinda – 9 units * Spooling/Winding Machines: Barmag – 1 unit, Kaltema – 2 units * Complete set of air compressors, dryers, and air tanks required for operation. * Mouline Thread Production Line with all accessories (embroidery threads). ⸻ Finishing Department * Rams: 1 × Brückner, 6-chamber, with Mahlo, Model 2002 * Stenters: 3 Turkish Damson machines * Fabric Inspection Machine: 1 unit * Sewing Machines: 30 units * Fabric Pressing and Packaging Machine ⸻ General Factory Utilities * Industrial Chillers: 2 units * Steam Boiler: 6 tons, Riello burner, 2018 * Steam Boiler: 0.5 ton * Fabric Dyeing Jet Machine: 50 kg * Yarn Dyeing Machine (Hank): 600 kg * Yarn Dyeing Machine: 2 × 300 kg, complete with winding and unwinding system * Hydro Extractor: 1 for yarn + 1 for fabrics + 1 for hanks

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Summa 1400 FME-p” production system Item for sale: 1 x Summa 1400 FME-p Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). The device has been tested for functionality. A test print can be seen in the photo. Todpfx Amozb Aktjyja Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re welcome to contact us directly.

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you. Tjdpfx Amoyuu Scsyoa

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Tsdpfeq Nx Aljx Amyja Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: new, Press brake tool/upper punch for Weibrenner press brake Tsdpfx Asi Hbbyemysa

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Tedpfxeu Agh Se Amyja Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: ready for operation (used), SCM P64 four-sided planer planer table length 2300 mm Tjdpfst Dwg Tsx Amyja planing width 180 mm planing height 105 mm Feed speed 6 and 12 m/min spindle diameter 35 mm Axial planing head adjustment for profiling 15 mm Motor power planer 4 kW Thicknessing shaft motor power 4 kW Motor power right and left shaft 5.5 kW Weight 1200 kg Dimensions 2820 x 1220 x 1920 mm Condition: Checked for function. All shafts have new bearings Price 5500.

Condition: like new (used), functionality: fully functional, planing height: 190 mm, spindle diameter: 50 mm, planing width: 250 mm, overall weight: 10,000 kg, Weinig Hydromat H25N four-sided planer with 100 m/min feeder - German production - hydraulic feed up to 100 m/min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 lower spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW Tedpfx Aon Slk Usmyja 6 upper spindle 15 kW 7 lower spindle 7.5 kW 8 universal spindle 1800 7.5 kW feed smoothly adjustable up to 100 m/min feed pump motor power 22 kW nine rollers in the table top, three of which are in front of the first head seven upper steel pulling rollers four upper rubber pulling rollers pneumatic pressure jointer on 1-6-7 spindle automatic lubrication of the countertop feeding table 3000 mm speed smoothly adjustable up to 100 m/min two upper pneumatic rollers six lower pulling rollers minimum material length 650 mm Transport dimensions 11000x2400x2000 mm weight 9 tons

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Tsdpfx Aoya I Iuomyea Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: used, Year of construction: 1991, working width: 220 mm, spindle diameter: 40 mm, working height: 120 mm, total width: 1,500 mm, total height: 1,500 mm, total length: 3,900 mm, overall weight: 2,000 kg, jointer table length: 2,000 mm, number of spindles: 4, chip removal: 10 mm, No. 04530 Four-sided planer and moulder WEINIG Quattromat 22 Used, year of construction 1991, very good condition, machine comes from a one-man workshop Four-sided planing and moulding machine with continuous feed Spindle configuration: 1st spindle bottom / 2nd spindle right / 3rd spindle left / 4th spindle top Infinitely variable feed 6 - 22 m/min Infeed table length 2000 mm Working width 25 - 220 mm Working height 6 - 120 mm Max. material removal 10 mm Diameter of the spindles 40 mm Motor power of the 1st spindle bottom 4 kW Combined motor power of the 2nd spindle right and the 3rd spindle left 5.5 kW Motor power of the 4th spindle top 5.5 kW Serrated steel infeed rollers Rubber outfeed roller Rubber roller in the table Including operating tools and spare rollers Including operating manual as a .pdf-file Tjdpfx Amozl Uukoysa Transport dimensions approx. 3900 x 1500 x 1500 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: Tsdsy S R Agjpfx Amyea 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Tedpfx Asx E T Dmjmysa

Condition: good (used), Year of construction: 1994, functionality: fully functional, working width: 450 mm, planing height: 310 mm, MELANTO 450x310 construction timber planer Tsdevdmygjpfx Amysa

Condition: used, Year of construction: 2011, Working width: 20–230 mm Working height: 8–120 mm Feed system • Variable-frequency controlled feed drive: 5–30 m/min, continuously adjustable, with 7 kW (9.5 HP) brake motor. • Pneumatically controlled up/down infeed roller before the 1st bottom spindle. • Axial adjustment range of the feed rollers relative to the left spindle: 35 mm. • Extended pendulum axis opposite the left spindles to 150 mm. • Reduced roller spacing in the area of the right-hand spindles. Machine frame, tables and fences • 2 m long jointing table (including jointing fence). • Grooved guide for short or difficult-to-feed workpieces, coated with Marathon PowerCoating. Table tops are non-removable. o Minimum working width: 25 mm o Maximum stock removal at the 1st bottom spindle: 7 mm • Manual lubrication pump. • One driven, hardened outfeed table roller, 210 mm wide. • One driven, hardened machine table roller, 210 mm wide. Pressure elements and guides • Spring-loaded top pressure rollers. • Anti-kickback device before the top spindle for short workpieces. Machine operation • Memory function for storing profile setup data. • EasyCom for quick and easy setup of the moulder and planer. • Storage for up to 1,000 profile programs, including tool data. • Reduced setup times. • Convenient and safe operation. • Basic equipment prepared for CNC-controlled adjustment and positioning. • 2 CNC-controlled radial adjustment and positioning axes for tool spindles No. 4 and No. 5, in conjunction with the Memory function or EasyCom. • CNC-controlled feed height adjustment (up/down) in conjunction with the Memory function. • Mobil- tool spindle (1 axis): automatic adjustment of the left spindle to different workpiece widths. • Centralized lubrication points located at the front of the machine. • Electromagnetic locking of the safety hood. • One internal light inside the safety hood. Specifications are provided for information only. Tedpfx Amozkklpsyoa This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: new, Year of construction: 2026, MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM Tsdoy Hcaaopfx Amyoa MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: new, Year of construction: 2026, MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK Tjdpey Hb U Njfx Amysa PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: like new (used), MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW Todpfjy D Akmex Amysa MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Todeh Uyg Njpfx Amyea

Condition: excellent (used), Year of construction: 1987, Four-side planer Manufacturer: Weinig Model: Profimat 22 N Year of manufacture: 1987 Planing height: 220 mm Planing width: 120 mm Number of spindles: 4 Feed speed: 5 – 22 m/min, infinitely variable Total power: approx. 17 kW Spindle speed: 6,000 rpm - First spindle: bottom, 4 kW, tool diameter: 125 mm - Second spindle: right, 5.5 kW, tool diameter: 180 mm - Third spindle: left, 5.5 kW, tool diameter: 190 mm Todoww A T Ujpfx Amyoa - Fourth spindle: top, 4 kW, tool diameter: 200 mm

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 7 Spindle arrangement: bottom, right, left, top, bottom, top, top Diameter of dust extraction nozzle: 7x120 mm Infinitely adjustable feed rate: 4-24 m/min Feed mechanism with universal joints Power supply: 400 V Tsdpfx Aezguutomysa Total power: 17 kW Overall dimensions: Length: 3400 mm Width: 1200 mm Height: 1200 mm

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 8 Tedpfx Aozgurxemyoa Spindle arrangement: bottom, right, left, top, bottom, top, left, diagonal Dust extraction port diameter: 7x120 mm Continuous feed rate adjustment: 4-24 m/min Feed system: via cardan shafts Power supply: 400 V Total power: 19 kW Overall dimensions: Length: 3640 mm Width: 1050 mm Height: 1200 mm

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 226-60758, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Feed motor: 2.2 kW Feed speed: 5–24 m/min Total power requirement: 25 kW Dimensions (Length/Width/Height): 3400 x 1800 x 1610 mm Machine weight: approx. 2500 kg Four-Side Planer WEINIG PROFIMAT 23 E - Year of manufacture: 1997 - Serial number: 226-60758 - Maximum working width: 230 mm Todpfx Aew Svb Tsmyja - Maximum working height: 120 mm - Cardan shaft feed, stepless adjustment 5–24 m/min - Feed motor: 2.2 kW - 1st spindle (bottom): 4.0 kW - 2nd spindle (right) – motor for 2nd right and 3rd left spindle: 7.5 kW - 3rd spindle (left) - 4th spindle (top), motor: 5.5 kW - 5th spindle (bottom), motor: 4.0 kW - Electrically adjustable height and depth: 0.25 kW - All spindles equipped with brake motors - Spindle speed: 6,000 rpm - Spindle diameter: ø 40 mm - Planing table: 2,000 mm with serrated table inserts and straightening guide - Feed rollers with pneumatic pressure - Feed roller diameter: 140 mm - Transport rollers opposite left spindle - Infeed roller before jointer with pneumatic actuation - SICO counters - Manual wax pump - Centralized lubrication points - 1 set of planing heads - Total connected load: 25 kW - Machine dimensions: L=3400 mm, W=1800 mm, H=1610 mm - Weight: 2500 kg