Used Mauguière Mav 290/8 for sale (36,615)

Condition: used, Year of construction: 2000, Machine description Lhsdpfsz H Ny Iox Ab Asn This used Partenair S.MAX40/AC refrigerated compressed air dryer, built in July 2022 by Friulair, handles a nominal flow of 366 m³/h. It runs on single-phase 230 V, 50 Hz, draws 0.82 kW and uses R407C refrigerant. Maximum working pressure is 14 bar. The DMC 35 controller shows the dew point on an LED bar. A one-piece aluminium heat exchanger and an electronic condensate drain complete the unit. Dimensions: 555 x 580 x 885 mm, weight 54 kg. Applications This second-hand air dryer removes moisture from compressed air downstream of a screw or piston compressor of about 40 hp. It protects pneumatic tools, cylinders, valves and air networks in mechanical workshops, sheet metal shops, woodworking, packaging and paint lines (food processing with suitable filtration). Key features / Advantages Proportional capacity control keeps the dew point stable at any load. Pressure drop is low, below 150 mbar on average according to the manufacturer. The compact, light unit connects in 1.5 inch BSP and plugs into a single-phase supply. Friulair is a well-known Italian dryer manufacturer, sold in France under the Partenair brand. The 2022 build year and clean appearance make resale and installation easy. Used refrigerated air dryer for sale at All Metal, specialist in used industrial machinery. Height: 130 Length: 80 Depth: 160

Year of construction: 2005, condition: excellent (used), power 11Kw (15hp) max working pressure 8 bar 400V three-phase power supply Lodpfxoiu Ic Ie Ab Ashn 1000 liter air tank

Condition: excellent (used), Year of construction: 2008, PROD. MAUGUIERE TYPE MAV400 S/N CAI027542 YEAR 2001 POWER (kW) 30 OUTPUT (m3/min) PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 60238 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) no ON TANK no DOCUMENTS no CONNECTION 1 Ledpfxsz Eap Ds Ab Aehn NEW/USED USED

Condition: excellent (used), Year of construction: 2008, MANUFACTURER: MAUGUIERE MODEL: MAV201 SERIAL NO.: CAI342405 YEAR: 2008 POWER (kW): 15 CAPACITY (m3/min): 2.25 PRESSURE (bar): 8 Lhsdpfsxxby Tjx Ab Aon

Condition: excellent (used), Year of construction: 2014, ARBURG A 370 S 700-290 U-Version (S&P 3804) Manufacture year: 2014 Operating hours: 41,257 Stunden Screw: 40 mm Injection pressure: 1530 bar Stroke volume: 188 cm³ Clamping Force: 70 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 600 mm Dimensions: 3700 x 1400 x 2000 mm Eeight: 3580 kg Connected load: 15 kW U-Version = clamping and injectionside could be turned into vertical and horizontal position, 1 x corepuller, 6 x hotrunner, Airvalve, Interface colorizing, 23.761 h automatic and 17.496 h manual... Ljdsz T A I Hjpfx Ab Ajhn Price: on request contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control Lhodpfxox Nkp Io Ab Aen • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: used, Year of construction: 2012, number of controlled axis 6 weight max. in kg 180 (max. 230) kg control KR C4 KUKA positioning accuracy +/- 0,06 mm 0 +10 °C - +55 °C Protection class IP 65 Noise level Ledpfx Ajzyclgsb Ashn

Condition: ready for operation (used), Year of construction: 1973, travel distance X-axis: 850 mm, travel distance Z-axis: 2,900 mm, controller manufacturer: SIEMENS, number of axes: 2, Turn-mill centre manufactured in 1973. This MAX MULLER 3000 / Norma 2900 x 850 features a turning length between centers of approximately 2850 mm and a faceplate diameter of Ø 630 mm. It is equipped with a SIEMENS CNC Control and has a drive power of 32 kW. If you are looking to get high-quality turning capabilities, consider the MAX MULLER 3000 / Norma 2900 x 850 machine we have for sale. Contact us for further details. Lhsdpfxj Adp Tvj Ab Asn - Turning Length between Centers: Approx. 2850 mm- Faceplate Diameter: Ø 630 mm- Drive Power: 32 kW- Operating Hours: Approx. 60,000h - 70,000h (mathematically calculated after 1998 retrofit)- Control Unit: SIEMENS CNC Control- Additional Accessories / Scope of Delivery: Complete machine, 1x hydraulic steady rest (Ø 50 mm - Ø 150 mm), faceplate Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), mileage: 439,700 km, power: 213 kW (289.60 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,770 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Equipment: crane, differential lock, Container truck with loading crane MAN TGM 18.290 First registration: 29.10.2015 Mileage: 439,700 km Automatic transmission, 12 speeds PALFINGER PK15500 loading crane Year of manufacture: 2010 2x hydraulically extendable Lifting capacity: 3,030 kg at 4.5 m 2,250 kg at 6.1 m 1,690 kg at 8 m 5th and 6th function (slewing/grab function) Remote control Hyvalift container hooklift system Hook-roller distance (retracted): 3.65 m Hook-roller distance (extended): 5.0 m Bumper overhang: +0.25 m Front tyres: approx. 50 % Rear tyres: approx. 40 % Front brake pads: 64-62 % Rear brake pads: 30-35 % Lhjdpfozl Tq Dsx Ab Aen Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: good (used), Year of construction: 1996, Offer 25115 Technical Data: - Saw blade diameter: 400 mm - Saw blade speed: 3000 rpm - Cutting height up to approx.: 125 mm - Cutting depth up to approx.: 600 mm - Bevel adjustable on 2 axes - Table size approx.: W 800 x D 800 mm - Table height: 920 mm - Drive: 400 V / 1.5 kW - Space requirement approx.: W 800 x H 1900 x D 1100 mm Lhodpfx Aswn D Emjb Aon - Weight approx.: 200 kg

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, Professional Two-Needle Post Bed Machine DÜRKOPP ADLER 868-290020 M-TYPE (ECO Version) For sale is a top-class, industrial post bed machine from the renowned German brand Dürkopp Adler, model 868-290020 from the prestigious M-TYPE series. Manufactured in Europe (Czech Republic), guaranteeing the highest quality of workmanship and legendary component fit. The machine is in very good visual and technical condition – well-maintained, clean, fully functional, and ready for immediate use. Lodpfxe Adl H Ej Ab Aehn 🌟 Key advantages of this unit: 🤖 Operator panel and automatic locking: The machine features automatic start and end locks controlled from an advanced control panel. The machine automatically and precisely secures the stitch to prevent unraveling, which significantly speeds up the sewing process, guarantees repeatability, and saves thread. Precise 3 mm needle spacing: A very dense, elegant, and desirable spacing. Ideal for luxurious edge stitching, delicate upholstery, and premium leather goods. The machine is equipped with a complete, original sewing set and is immediately ready for operation in this configuration. Powerful stitch length up to 12 mm: Allows for both standard construction seams and beautiful, very long decorative stitches, which are highly desirable in modern upholstery. Adjustable presser foot stroke up to 9 mm: The machine has manual adjustment of the presser foot stroke height. This allows it to “climb” and smoothly move over material thicknesses, transverse seams, or multiple layers of leather without slowing down or losing the stitch. Triple transport (feed dog, needle, presser foot): A robust mechanism that easily handles the heaviest materials. The machine sews perfectly evenly, without puckering or shifting the material layers – indispensable for thick leather, artificial leather, and upholstery fabrics. ECO version – Reliability and simplicity: A design devoid of complex electronics and pneumatics, eliminating the risk of costly failures of computer components. This machine is designed for trouble-free, long-term operation, in which the operator has full, manual control over each stitch. Energy-efficient motor with needle positioning: A modern drive provides quiet operation, high performance, and drastically reduced power consumption. The motor is equipped with an automatic needle positioning function, which significantly speeds up and simplifies the work (the needle always stops in the desired position, e.g., embedded in the material when turning the component). Application: The machine is ideal for professional workshops and production lines involved in: Automotive upholstery (seats, door panels, steering wheels, dashboards) Furniture upholstery (sofas, armchairs, mattresses) Heavy leather goods (bags, suitcases, belts, shoes) The machine is prepared for operation with a 3 mm spacing. For a decisive customer, there is also a technical possibility of configuring it for an 8 mm or 16 mm spacing. Delivery to the customer by courier is possible.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 7,800 mm, total width: 2,200 mm, overall weight: 2,100 kg, 2020 HEBBECKER VERSAJET II VJ-II-2-9090-4180 – Industrial Gas-Heated Textile Tunnel Dryer Professional industrial HEBBECKER VERSAJET II gas-heated textile tunnel dryer, manufactured in 2020 and designed for continuous, high-volume textile screen-printing production. The machine is equipped with a dual conveyor belt system (2 × 850 mm), allowing two production lanes to be used simultaneously. The touchscreen control panel provides convenient adjustment of the conveyor settings and drying temperature. The direct gas-heating system provides fast heat-up, high efficiency and uniform curing, while keeping electrical energy consumption very low compared with conventional electrically heated dryers. Key Features Manufacturer: HEBBECKER GmbH Model: VERSAJET II VJ-II-2-9090-4180 Year of manufacture: 2020 Serial No.: 2001948 Machine type: Industrial textile tunnel dryer Heating system: Direct gas heating Gas heating capacity: 40 kW Dual conveyor belt: 2 × 850 mm Heating zone length: 5,565 mm Electronic temperature control Temperature stability: ±2°C Fast heat-up time Designed for continuous industrial production Suitable for textile screen-printing curing and drying Heavy-duty industrial construction Low electrical energy requirement Quiet operation Dual Conveyor System The VERSAJET II is equipped with two separate conveyor belts, providing two parallel production lanes. The touchscreen interface provides individual conveyor settings, making the dual-belt configuration particularly useful when processing different garments, print types or production batches simultaneously. Energy Efficiency The dryer uses direct gas heating without a heat exchanger, allowing the gas energy to be transferred efficiently into the drying process. According to the manufacturer's specifications, the system can provide more than 50% energy savings compared with electrically heated dryers, depending on operating conditions and configuration. Technical Data Electrical supply: 400 V / 3-phase / 50 Hz Electrical power: 3.2 kW Lhodpfxjy Ty Sgs Ab Aen Current: 5.1 A Fuse: 16 A Gas heating capacity: 40 kW Gas pressure: 30 mbar Conveyor configuration: Dual belt Belt width: 2 × 850 mm Heating zone length: 5,565 mm Machine weight: approx. 2,100 kg The HEBBECKER VERSAJET II is an excellent solution for professional textile printing companies looking for a high-capacity, energy-efficient gas dryer with a dual conveyor system. Machine available for inspection.

Condition: like new (used), Durkopp Adler 867-290142M Triple feed XXL hook 2 needles (5/6/8/10/12...mm) automatic Durkopp Adler 867-290122M Triple feed 2 needles (5/6/8/10/12...mm) automatic Durkopp Adler 867-290322 Triple feed 2 needles (5/6/8/10/12...mm) automatic Durkopp Adler 767 Triple feed 2 needles (5/6/8/10/12...mm) Ljdpfx Abjvv E Dno Ashn automatic

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm Ljdpfx Abju Idxro Aohn TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Lodpfxju Idxfj Ab Ajhn Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Lodpfou Idv Djx Ab Aohn Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) Lhedju Idvwspfx Ab Aen - control panel - manual switch i.D. *

Condition: excellent (used), mileage: 536,550 km, power: 213 kW (289.60 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,770 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Equipment: differential lock, tail-lift, Refrigerated/Freezer Truck MAN TGM 18.290 First registered: January 2016 Mileage: 536,550 km Automatic transmission, 12 gears Emission class: 6 Carrier Supra 125 OMZ refrigeration unit Loading space divided into 3 compartments with sliding wall Length: 7.9 m Widths: 75 cm, 82 cm, 82 cm Height: 2.15 m Payload: 7,370 kg Total weight: 18,000 kg Palfinger MBB tail lift, 2000 kg Lodpj Aa Acijfx Ab Ajhn Brake pad wear, first axle: 84–85% Brake pad wear, second axle: 82–82% Tires, first axle: +/- 80% Tires, second axle: NEW! Automatic climate control Onboard computer Central locking Cruise control Differential lock Electric windows and exterior mirrors Air suspension front and rear Heated seats ... Address: Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new • Chuck size (main spindle): up to 15" (380 mm) (not included) • Bar capacity: 60 mm • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque (possible) • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment • Coolant pump, 10 bar • Oil skimmer • 3-color warning light • Optional: Chip conveyor (hinge belt conveyor). Price on request Lhsdpfx Abeyrr Rwo Aen • Machine is delivered with standard basic package: Turret fully equipped, base holder included. Technical Specification Driven Tools No

Condition: like new (used), functionality: fully functional, Dürkopp adler 867-290342-100 Longarm Lhedpevz Tk Hefx Ab Aon Dürkopp adler 467-65-Fa 273 Longarm bed zipper machine

Condition: used, Year of construction: 2014, operating hours: 4,804 h, * Radio * Driver’s air-suspension seat ----Structure: ROPS cab with cab heating, articulated boom, dozer blade 2200x500mm, track width approx. 450mm, hydraulic quick-change system with swivel motor (Powertilt), 4 additional hydraulic connections. Yanmar 4-cylinder diesel engine 4TNV98CT-WTB, 3,318 cc, 51.6 kW, 2 travel speeds. Max. digging radius 7,730 mm, max. digging depth 3,980 mm, max. dump height 6,120 mm, fuel filling pump. Indicated operating hours: 4,804 h----160 mm digging bucket Ledpfx Aey Iudmjb Ajhn Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE HAS TO BE PAID!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see legal notice) form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales discussions.

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Lodpfxew Ebpwo Ab Aohn Weight 18,400 kg

Condition: used, Centrifugal fan, chip extraction fan, fan, extraction, chip fan, fan wheel, fan housing -Fan housing: for exhaust fans -Fan mount: Ø 215 mm, bolt circle Ø330 mm -Inlet: Ø465 mm / bolt circle Ø495 mm M8 -Outlet: 200 x 280 mm -Number: 2x housing available Lhsdpfx Aelx Nwdeb Asn -Price per piece -Dimensions: 780/290/H820 mm -Weight: 30 kg/pc.

Condition: excellent (used), mileage: 42,000 km, power: 213 kW (289.60 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Equipment: air conditioning, = Additional options and accessories = - Air suspension - Reversing camera - Visor = More information = Ljdpeyxn Uaofx Ab Ajhn Year of construction: 2019 Front axle: Steering GVW: 18.000 kg Technical condition: very good Visual appearance: very good Price: On request

Condition: new, Year of construction: 2025, Dürkopp Adler 867-290142-M NEW – Double Needle Direct Drive – Direct from Stock – €6,500 excl. VAT For sale: brand new Dürkopp Adler 867-290142-M, available immediately from stock. ✔ New / unused ✔ Double-needle version – ideal for parallel stitching and finishing on leather, textiles, and technical fabrics ✔ Available in 6 mm, 8 mm, and 10 mm stitch width ✔ Equipped with M-TYPE direct drive motor – quiet, powerful, and energy-efficient ✔ Triple transport (lower, upper, and needle feed) for perfect material guidance ✔ Professional German quality from Dürkopp Adler ✔ Ready for immediate use in workshops or production Limited-time offer – only valid until the end of April 2026! Special price for quick sale: €6,500 excl. VAT First come, first served – available immediately For more information or to arrange a viewing, feel free to send a message. Keywords: Lsdpfsz Abyusx Ab Ashn industrial sewing machine for sale industrial sewing machine wholesale sewing machine supplier professional sewing machines industrial sewing machine used industrial sewing machine sewing machines for businesses