Used Materials Testing Machine Special Torsion for sale (82,652)

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures Nwsdpfxezwvtxo Ahkek The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Nwedpfxjzwvu No Ahkjk Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Material testing machine Testing force in tension/compression: 500 N Overall height, without head crossbeam: 789 mm Overall width: 411 mm Overall depth: 622 mm Installation area: net footprint: 0.008 m² load frame base area: 0.196 m² specific floor load: Nwodpfxeziixlj Ahkek based on typical installations: 0.85 kg/cm² with 50% safety margin: 1.28 kg/cm² Ceiling load: based on typical installations: 97 kN/cm² with 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with extension arm installed pointing upwards: minimum height: 235 mm maximum height: 565 mm Working space height with extension arm installed pointing downwards: minimum height: 90 mm maximum height: 420 mm Software: testXpert III Version 1.9 Weight: approx. 78 kg with accessories Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nwedpfx Ahozimgtjkek Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 Material Testing Machine, 20 kN Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Machine Type: Servo-electric Material Testing Machine / Universal Testing Machine Max. Testing Force: 20 kN For sale is a used Zwick / Roell Z020 Allround-Line material testing machine with testControl II control system, industrial PC, and installed testXpert V3.5 software. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials, and is used in testing laboratories, quality assurance, research and development, and training. Technical Data: Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Max. Testing Force: 20 kN Testing Direction: Tensile and Compression Testing Space Height: 1,000 mm Crosshead Speed: 0.0005–1,000 mm/min Power Supply: 230 V / 50–60 Hz Power Consumption: 8 A Control System: testControl II Software: testXpert V3.5 Load Cell: Zwick / Roell Xforce P 20 kN Zwick / Roell Xforce P 2.5 kN Dimensions: Machine Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Machine Weight: approx. 212 kg Equipment: testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Accessories as shown in the pictures Shipping Data: Nodpfx Ahezra Rqokswk Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Shipping Weight: approx. 212 kg Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplates present. Scope of Supply: Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Further accessories as shown in the pictures The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideally suited for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Line current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Control console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the images Technical documentation as shown in the images Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of supply: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Control console Testing platens / compression tools as shown in the images Machine accessories as shown in the images Technical documentation as shown in the images Important note: To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for re-commissioning. A functional test could not be performed due to the missing software. Therefore, the sale is preferably aimed at specialist companies for re-commissioning or retrofitting. Condition: Used Optical condition as shown in the images. Normal age-related signs of wear are present. The workbench shown in the photos is not included in the sale. The control console and the machine accessories shown are included in the scope of supply. Nodpfxjzlp Ixj Ahkswk Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading by forklift is possible. Shipping by freight carrier is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, ZwickRoell Z100 THW Allround Table Top Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Nedozktr Sepfx Ahkswk Year of Construction: 2024 Machine Type: Electromechanical Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a like-new ZwickRoell Universal Testing Machine, Type Z100 THW Allround Table Top, manufactured in 2024. The machine is suitable for highly precise tensile, compression, bending, and material tests in research, development, quality assurance, laboratories, and industrial applications. The testing system is equipped with a 100 kN XforceK load cell, state-of-the-art measuring and control technology, and comprehensive documentation, including operating instructions, testing, and calibration documents. Technical Data: Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Article Number: 3023272 Works Number / Serial Number: 746182 Year of Construction: 2024 Testing Force: 100 kN Test space height (bottom): 1,285 mm Test space height (top): 1,400 mm (with additional cross member) Test space width: 1,040 mm Cross member speed: 0.0001 to 1,500 mm/min Return speed: max. 2,500 mm/min Control deviation: max. 0.05 % Stroke resolution: 0.484471 nm Positioning accuracy: ±2 µm Control cycle: 1,000 Hz Power connection: 400 V / 3-phase / N / PE Mains frequency: 50 / 60 Hz Current consumption: max. 9 A per phase Power consumption: approx. 6 kVA Protection class: IP32 Load Cell: Manufacturer: ZwickRoell Series: XforceK Serial Number: 832082 Nominal force: 100 kN Nominal sensitivity: 2 mV/V Dimensions: Load frame height: 1,769 mm Overall height with base frames: 1,884 to 2,694 mm Width: 1,360 mm Width with base frames: 1,536 mm Width including machine electronics: 1,729 mm Depth with base frames: 781 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 215 kg Base frames: approx. 34 kg System weight with typical components: approx. 315 kg Maximum total weight according to nameplate: 385 kg Equipment: Electromechanical two-column testing frame 100 kN XforceK load cell Electronic measuring and control technology Programmable test sequences Digital measurement data acquisition Mechanical holding brake Control panel with emergency stop Original ZwickRoell operating manual Testing and calibration protocols Measurement process capability studies (Cg/Cgk) Calibration markings present CE marking Accessories as shown in the pictures Condition: Used Year of construction 2024. The machine is in very good condition. Testing, maintenance, and calibration documents are available. Optical condition as shown in the pictures. Scope of supply: ZwickRoell Z100 THW Universal Testing Machine 100 kN XforceK load cell Original operating manual Testing and calibration documents Documentation Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Nsdpfx Aezizlqjhkjwk - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm Nwodpfx Ahszii Ugskjk - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: used, Technical details: traction force: 250 kN control: SCHENCK HYDROPULS PSB dayligth: 1000 - 1200 je nach Spannwerkzeug /acc. clamp.tool mm piston stroke: 180mm mm A servo-hydraulic leaf spring testing machine with Series 65 digital electronics is designed for testing leaf springs used in commercial vehicles, railway vehicles, and industrial applications. A hydraulic actuator applies defined loads while force, displacement, and, if required, strain are measured. Typical tests: ·Static spring characteristic (force-displacement curve) ·Fatigue and endurance testing ·Cyclic load testing Njdpfx Ahszi R R Aekewk ·Service life testing ·Tensile and compression testing ·Production quality control *

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M Nedovxwxcepfx Ahkswk pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: used, power: 155 kW (210.74 HP), fuel type: diesel, color: yellow, mast type: duplex, Year of construction: 2018, operating hours: 11,999 h, Year of manufacture: 2018 Intended use: Construction Nwjdpoy T Rdgefx Ahksk Drive type: Wheeled Number of cylinders: 4 GVWR: 46,000 kg Superstructure brand: LIEBHERR LH 50 LITRONIC CE marking: Yes LIEBHERR LH 50 M LITRONIC MATERIAL HANDLER YEAR 2018 TOTAL WEIGHT 46,000 KG REACH 20.0M CE-MARKED MACHINE ENGINE D934 A7-04 POWER 155 KW / 210 HP WHEELBASE CM GROUND CLEARANCE CM WIDTH OF UNDERCARRIAGE CM 4-POINT OUTRIGGERS HYDRAULICALLY RAISABLE CABIN 3RD AND 4TH HYDRAULIC LINE INDUSTRIAL STRAIGHT MONOBOOM Z INDUSTRIAL STICK, STICK END WITH ANGLE 5-TINE GRAB MULTI-TINE GRAB CAPACITY 1.10 - 1.70 M3 CRANE IS READY FOR WORK WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, Type: FM611E1 400V/3N - 15A - 50Hz - 9.2kW dimension Nwedpfxozcgc Ne Ahkok Length: 980mm Width: 770mm Height: 840mm

Year of construction: 2015, condition: used, diameter / mm Cutting (quantity) / weight 15000 kg Control Siemens 840D Production line - Modular Special Machine (MSM) with clamping device 1 double spindle machining centre Make: GROB Type: Special machine GM4650 Year: 2015 Control: Siemens, type 840D sl CO2 fire extinguishing system, air filter LTA, oil treatment, make: Ruez, type MBF-1000 AS, year 2015 - Operating hours 43,774, spindle hours 1,598 Technical data Nodephu D Topfx Ahkewk Machine length: 8400mm Machine width: 2500mm Machine height incl. LIP: 2150mm Machine weight: 15.000kg

Year of construction: 2026, condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 820 kg, total length: 2,560 mm, total width: 1,700 mm, total height: 1,820 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: Nwodpfxew Afdas Ahksk The ASCO Bunker-BC enhances material handling efficiency for quarries, recycling plants, and construction sites. Ideal as a standalone unit or an add-on to the SD Compact system, it boosts throughput by up to 50%, ensures continuous material feeding, and reduces downtime for higher productivity. Key Features: • Robust, high-performance drum bunker for long service life • Bidirectional hopper belt for flexible material flow • Quick-change hopper belt for minimal maintenance • Fully electrical control with frequency converter Tech Highlights: W 1.70 m · L 2.56 m · H 1.82 m · Qmax 90 m³/h · Power 2.2 kW (400 V) · Bunker belt W 0.6 m · Filling H 2.16 - 2.66 m · Weight 820 kg

Condition: good (used), weight of the machine ca. 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 550 mm Table diameter: 260 mm Base circle diameter: 0–630 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 300 kg X-axis: 230 mm Y-axis: 370 mm Z-axis: 500 mm Max. workpiece diameter: 630 mm Nodjzidz Uepfx Ahkewk Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Nodpfxozidz Ij Ahkewk Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify Nwjdjzuw R Hepfx Ahksk - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Year of construction: 2015, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4S 10kN 2268/000 1215 902, Dyna-Mess TP 10kN HF Cyclic Testing Machine / Endurance Vibration Test Stand – Top Condition, including temperature chamber (up to 120°C) & software Description: Manufacturer: DYNA-MESS Prüfsysteme GmbH Model: TP 10kN HF (Servopneumatic/Servoelectric High-Frequency Cyclic Testing Machine) Maximum test force: 10 kN (Static and dynamic range) Maximum machine travel: 12mm Date of purchase: December 2015 Condition: Almost new, very little use, immediately ready for operation (Plug & Play) Availability: Immediate For sale is a compact, high-precision cyclic testing machine from the premium manufacturer DYNA-MESS with a 10 kN nominal load and 12mm stroke. The system was acquired for dynamic endurance vibration tests and lifetime determination as part of a research project and has not been used since. It is in excellent, virtually new condition both visually and technically. The complete package includes a matching temperature chamber with controller up to 120°C. This enables standard-compliant, dynamic testing of components and materials under realistic thermal ambient conditions. Nedpszunz Nofx Ahkowk System & Scope of Delivery: Load frame Dyna-Mess TP 10kN HF with highly accurate force and displacement sensors. Complete PC including installed and calibrated control software DYNA-TCC under Windows 7. The system operates completely autonomously and is immediately ready for operation. Temperature chamber with external control unit for tests up to 120°C. All associated documentation and connection cables. The machine is perfectly suited for laboratories, universities or quality assurance departments looking for a reliable system for fatigue and endurance tests without incurring the budget of new equipment. Inspection of the machine is possible by prior arrangement. As this is a commercial sale, the item is sold ex-works without warranty or guarantee. The sale is preferably to buyers who can collect the item themselves (dismantling and transport must be organized by the buyer). Price: €24,500 negotiable plus VAT.

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 5 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Nedpjydanhefx Ahkjwk Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2026, condition: new, functionality: fully functional, Universal testing machine PM10 (10 kN) – Complete system including software For sale is a versatile universal testing machine PM10 with a maximum testing force of 10 kN. The system is characterized by its flexibility and efficient stand-alone operation. The machine is ready for use, including evaluation electronics and basic software for comprehensive data analysis. Technical data & performance features • Maximum testing force: 10 kN (including matching load cell) • Crosshead travel: 700 mm • Testing space / installation space: 400 mm • Testing speed: 1 – 500 mm/min • Return speed: 700 mm/min Nsdpfsyc U Ugsx Ahkowk • Path resolution: 0.01 mm • Overall height: 1,230 mm • Weight: approx. 85 kg Highlights & operation • Flexible stand-alone operation: Quick tests can be performed directly on the machine via a numeric keypad, completely without a PC. • Powerful basic software: Machine control, recording of curves, and detailed data storage when connected to a PC. • Open data interface: Easy export of raw data for further processing in your own programs (e.g., Excel). Scope of supply • Universal testing machine PM10 • Load cell 10 kN • Integrated evaluation electronics • Basic software for control and evaluation Optional services & accessories (upon request) • Service: Delivery, professional installation, and commissioning on site • Certification: DAkkS or factory calibration according to DIN EN ISO 7500-1 • Extensive range of clamping devices: Pressure plates, bending and shear devices, wedge and scissor clamps, peeling and screw clamps, as well as pneumatic or hydraulic clamping devices. The machine is available immediately. Please contact us for an individual offer including the appropriate accessories for your testing requirements!

Year of construction: 2026, condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 48 kg Resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 5 kN Includes evaluation electronics and basic software. Nsdpfxsd R Dqbo Ahkewk Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a "quick test" even without a PC. For tests that require data storage and recording of the curve, we offer the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or manufacturer calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending jigs, shear jigs, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PM3, Universal testing machine PM3 (2026) Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Displacement resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Load cell: 3 kN Nodpfxoyc U Dbo Ahkewk Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option to control and evaluate the tests using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Force sensor: 3 kN Nwjdpfefdzupsx Ahksk Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a "quick test" even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option of control and evaluation with the basic software. This enables you to generate different test sequences and create a test report. Furthermore, you have the option of further processing the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Resolution: 0.01 mm Nwsdpfx Aod R Dpushkjk Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a keypad, allowing for a “quick test” even without a PC. For tests that require data storage and a record of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.