Used Marinus Machinery Powermax Finger Jointer & Defect Saw for sale (74,897)

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Ljdpfep R Iwhsx Anueac Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. Lajdpfxsf Hkgpj Anuec This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Ljdoiv R Hhspfx Anujac

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: Lajdpfeq Auhdjx Anusc 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Model: Powermax Endmatcher 300 Year of manufacture: 2017 Well-maintained machine, sourced from a parquet manufacturing facility The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Control via touch panel at the machine infeed Lajdpfx Ajy H U Upenujc Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Year of construction: 2025, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Westtech Woodgripper WG1600 7-finger grapple / incl. saw unit / incl. infinitely rotatable tilt rotator / incl. OQ70/55 adapter plate / incl. V90 connector / year of manufacture: 2025 / DEMO unit / in stock & immediately available Price: €40,290.00 net / €47,945.10 gross - Grapple opening (mm): 1,800 - Self-weight (base – full equipment) (kg): 530 – 1,375 - Recommended flow rate (l/min.): 60 – 190 - Recommended operating pressure (bar): 100 – 300 - Service weight of rigid carrier vehicle (t): 12 – 22 - Service weight of articulated carrier vehicle (t): 12 – 22 Equipment: - incl. infinitely rotatable tilt rotator incl. 30° mounting bracket - incl. saw unit .404 - version with grease lubrication - Electro-hydraulic switching between grapple and saw unit - incl. OQ70/55 adapter plate - incl. V90 electrical connector We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. Lasdjzd Nm Sepfx Anuoc We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sales excepted! Internal No.: 326033 = Further information = New: No Part suitable for: Application forestry Please contact Marius Herden for further information.

Condition: good (used), Year of construction: 2005, AUTOMATIC FINGER-JOINT LINE, WITH DOUBLE HEAD AND 6,000 mm PRESS. Brand YONGQIANG, model FJL150/8 Dimensions of boards at input: Maximum/minimum width: 150 mm / 30 mm Maximum/minimum thickness: 80 mm / 30 mm Maximum/minimum length: 895 mm / 150 mm Dimensions of finished boards: Maximum/minimum width: 150 mm / 30 mm Maximum/minimum thickness: 80 mm / 30 mm Ledjza Dhqepfx Anuoac Maximum length: 6,000 mm 1. Transfer system with smooth conveyor belts for feeding the pieces into the first finger-joint machine. 2. Finger-joint machine MHB3515B-A, complete with a movable carriage with hydraulic movement and vertical and front clamping devices, a conveyor belt for feeding the pieces, an incisor unit, a disc-cutting unit, and a ram unit. 3. Finger-joint machine MHB3515B-B, complete with a movable carriage with hydraulic movement and vertical and front clamping devices, a conveyor belt for feeding the pieces, an incisor unit, a disc-cutting unit, a ram unit, and a gluing unit. 4. Transfer system with motorized rollers and an RC 2x800 piece-by-piece separation system, consisting of a transverse pneumatic piston and a motorized belt in a vertical position. 5. SC300 transfer system, with a conveying system using two side chains, one of which is adjustable in width, and a central clamp along the entire length of the transfer system, with vertical idler rollers. The function of this transfer system is to guide the pieces one by one into the press. 6. Hydraulic finger-joint press MHB15608-C, consisting of a grooved and motorized roller for feeding the pieces, a cutting unit, a pre-pressing system, and a pressing and ejection system for the pieces, and support arms for unloading the slats. Used machine, manufactured in 2005. In very good condition.

Condition: used, Double Mitre Saw RAPID Type DGL 5000 / 500 Lodpfx Asyxy S Denujac In need of repair - control unit non-functional Year of manufacture: 1993 Cutting length: 5000 mm Shortest cut length: 350 mm Saw blade diameter: 500 mm - Control unit non-functional Space requirement (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are making space Affordable machine – ideal for export

Condition: excellent (used), Very well-maintained Cursal 6000/250 mm cross-cut saw operates either with marking chalk as a defect cross-cut saw or as an optimizing cross-cut saw without length limitation. Ledpfjynlnzex Anujac

Condition: new, Year of construction: 2026, machine/vehicle number: KF0409HKP20260601, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, throat depth: 400 mm, total length: 1,685 mm, total width: 2,300 mm, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, bending angle (max.): 90 °, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, warranty duration: 12 months, Mechanical Structure 1. Frame: Integral thick steel plate welded structure with shot blasting stress relief, high torsion resistance, stable long-term precision; processed by large CNC boring & milling machine. 2. Sliding ram: Connected to cylinders via spherical joints; self-lubricating rectangular guide rails; fitted with 0.005mm grating scales on both sides for synchronous closed-loop detection. 3. Worktable: Equipped with motor-driven integral mechanical crowning wedge to compensate deflection. 4. Backgauge: Servo-driven ball screw with dual linear guides, modular multi-axis expandable design, fast and high-precision positioning. 5. Tooling & accessories: Quick clamping upper dies, dual V lower dies for fast mold change; adjustable front support stand with horizontal & vertical movement. 6. Anti-deviation structure: Dual-side grating scales eliminate throat deformation interference, strong anti-unbalanced load capacity. 7. Cantilever operation box conforming to ergonomics for easy operation. Hydraulic System 1. Integrated PHUCHIN hydraulic manifold, compact layout and zero leakage. 2. Original SKF/PARKER sealing rings for long service life. 3. Special oil tank with high cleanliness; oil level & temperature visual display; built-in overload protection. Electrical & Control System 1. Main SCHNEIDER electrical components, anti-interference and safe. 2. Movable foot switch with emergency stop; neat heat-dissipating electrical cabinet wiring. 3. DA53T CNC Controller (4+1 axes standard, expandable to 6+1 axes): - 15-inch color LED touch screen, multi-language support, mouse compatible - Storage: 999 workpieces, 20 upper molds + 20 lower molds, 100 programs with 25 steps each - Multiple ports: USB, RS232, Ethernet; supports robot linkage & automatic production line connection - Real-time mold graphics, programmable step speed, dual-machine linkage function Core Component Brands Hydraulic system: PHUCHIN/Bosch Rexroth; Oil pump: Hi-Tech/SUNNY; Grating scale: Italy GIVI; Seals: SKF/PARKER; Electric parts: Schneider; Main motor: Siemens/Lido Other Advantages - Comply with national JB & GB standards for press brakes; Noise ≤82dB(A) - 12-month warranty; 8-hour response & 24-hour on-site after-sales service 二、.Technical Parameters 1. Rated bending force: 1000KN 2. Max bending length: 3200mm; Column distance: 2700mm 3. Ram stroke: 200mm; Max opening height: 450mm; Throat depth: 400mm 4. Speed: Rapid traverse 180mm/s, working speed 0–10mm/s, return speed 170mm/s 5. Main motor power: 7.5KW; Power supply: 380V/50Hz three-phase 6. Precision Index Lsdjwfwkwspfx Anuoac - Y1/Y2 ram positioning accuracy: ±0.02mm; Repeat positioning: ±0.01mm - Workpiece angle tolerance: ±30' full length - X-axis backgauge repeat accuracy ≤±0.01mm; R-axis ≤±0.02mm 7. Environment requirements: Temp -5℃ ~ 40℃, humidity 55–85%RH, altitude ≤1000m 8. Standard axes: Y1,Y2,X,R,V (4+1 axes)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm Ledpfxexu Uhvj Anujac - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Laodpfex Axbcex Anujc

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, product width (max.): 330 mm, working width: 330 mm, „Technically audited by Focus Machinery expert on June 5th, 2026 – 100% ready for production" Lasdpfx Aerxrx Sonujc 8 colour UV-Flexoprinting machine: Model eFlex 330-2 S

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 75 kW (101.97 HP), shaft diameter: 1,200 mm, warranty duration: 12 months, The ERP Series – Eco Recycling Plant is Mizar’s latest innovation in cable recycling, engineered to deliver maximum output with minimal energy consumption. This compact and high-performance system is built on two core components: the FGR – Fine Granulator and the DES – Densimetric Separator. Together, they offer an advanced, eco-friendly solution for high-purity metal and plastic separation. The ERP Series stands out with its low energy consumption, optimized material flow, and precise separation technology — all integrated within a space-saving design. Whether operating as a standalone system or as part of a larger line, ERP offers excellent efficiency without compromising quality. Lodexb A S Nepfx Anujac Operators benefit from a smart PLC-controlled touch-screen interface, allowing real-time monitoring and simple operation. All components are CE-certified and manufactured with high-grade materials to ensure long-term durability and performance. The ERP Series is available in three sizes to fit diverse operational needs: ERP S1 , ERP M1 , ERP L1 With the ERP Series, you can achieve maximum recovery rates, superior material purity, and energy-efficient operation — all in one eco-conscious system.

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), overall weight: 1,250 kg, total length: 1,300 mm, total width: 1,500 mm, total height: 2,140 mm, cutting length (max.): 500 mm, cutting diameter: 40 mm, number of blades: 5, rotor length: 400 mm, warranty duration: 12 months, MIZAR CMT Compact Series - All-In-One Copper Wire Granulator & Cable Recycling Machine Lasdsv Hbdrjpfx Anuoc The Ultimate Compact Solution for Maximum Copper Recovery The MIZAR CMT is an advanced, all-in-one cable recycling machine engineered for facilities with limited space but high-performance demands. Integrated with state-of-the-art Turbo Mill technology, it ensures the complete separation of even the finest copper wires (hair wires) from plastics, delivering maximum purity and scrap copper recovery in a single compact footprint. KEY ADVANTAGES & FEATURES • All-In-One Design: A complete, plug-and-play copper wire granulator engineered into a single, space-saving unit. • Integrated Turbo Mill Technology: Achieves exceptionally high purity by aggressively pulverizing and separating ultra-fine copper wires that standard granulators cannot process cleanly. • Optimized Input Capacity: Safely and efficiently processes scrap cables with a maximum thickness of up to 40 mm and a maximum feeding length of up to 50 cm. • High-Efficiency Copper Recovery: Highly effective in separating copper and plastic components, maximizing your recycling profitability. • Cost-Effective Operation: Energy-efficient drivetrain minimizes daily operational costs without sacrificing throughput. PROCESSED MATERIALS • All types of scrap electrical cables, flexible wires, communication cables, and complex harnesses (Max Ø 40 mm / Max Length: 50 cm). Ready for an all-in-one cable recycling upgrade? Contact us for a customized quotation, technical details, or a performance test. Mizar Recycling Machinery

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Ljdsd H Hmhepfx Anuoac Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four-side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches Lodpfszf Nk Tjx Anuoac • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel-type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four-side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders: 3 sets Chiller: 1 set Spare K-type sealing knives: 3 sets

Condition: used, functionality: fully functional, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, Microcut Vertical Turret Milling Machine – 5HP Microcut vertical turret milling machine manufactured by Buffalo Machinery Co. Ltd, Taiwan. Heavy duty industrial machine fitted with power feeds, coolant system and machine vice. Model: 5VK type with 5HP motor and 380V 3 phase supply. Suitable for precision engineering, fabrication, maintenance workshops, toolrooms and general machining work. Features include: Vertical turret milling head Large T-slot table Power feed controls 5HP motor 380V 3 phase Machine vice included Coolant tray and lubrication system Variable speed head Heavy cast iron industrial construction Machine is in good used workshop condition with normal cosmetic wear from industrial use. It is complete and operational. Ideal for engineering shops, maintenance departments and production work. Loading available on site. Transport can be arranged. Lajdpey R Ebnefx Anusc Viewing welcome. Open to sensible offers.

Condition: ready for operation (used), functionality: fully functional, We offer this ready-to-use IML Machinery DA-900 IML DA 900 box laminating machine. Manufacturer: IML Machinery Model: DA-900 Condition: ready for use Category ID: 174 Type ID: 82 Laedpfxjzfv Tzj Anusc Machine type: IML DA 900, box laminating machine DESCRIPTION Thanks to its ease of operation and quick changeover capability, this electro-pneumatic machine is suitable for small and medium production volumes of high-quality boxes. The operator places the box onto the pre-glued facing paper and then manually feeds it into the machine. Once the box is positioned, the processing sequence is started via the machine's foot pedal. The machine then operates independently, lining the box, including the inner flap. At the end of the cycle, the box is automatically ejected. TECHNICAL DATA Production: approx. 7 pieces/minute Voltage: 220 volts, single-phase Total power: 2.5 kW Compressed air connection: Rilsan hose Ø 12 mm Air consumption: 20 NL/minute at 6 bar DA 900 Box dimensions (L × W × H): min. 60 × 60 × 10 mm; max. 430 × 350 × 120 mm Machine dimensions (W × D × H): 1200 × 1400 × 2300 mm Weight: 1000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, functionality: fully functional, power: 18.2 kW (24.75 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 15 l, color: blue, operation weight: 1,725 kg, lifting power: 600 kg/m, lifting height: 3,380 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.23 m³, Year of construction: 2026, Equipment: all wheel drive, hydraulics, pallet forks, standard shovel, We offer the compact articulated wheel loader Rippa RL06 as a new machine for commercial customers. The machine is ideally designed for tight spaces in landscaping, agriculture, and on construction sites. 🔥 Exclusive Service: 100 km free delivery! We will deliver the machine free of charge to your yard or construction site within a 100 km radius of 76332 Bad Herrenalb. Unloading is carried out easily using our company's own truck. Current Status: The machines are currently in transit. Pre-orders are possible immediately. As soon as the delivery arrives, the machines can be inspected and test driven at our location in 76332 Bad Herrenalb. Performance & Drive: Engine: Kubota D1105 (3-cylinder diesel, water-cooled) Power: 18.2 kW / 24.7 hp Emission Standard: Stage V / EURO 5 Travel Speed: 0 - 8 km/h Tires: Off-road tires for improved traction Operating Data & Hydraulics: Operating Weight: 1,725 kg (transport possible on a 3.5-ton trailer) Safe Working Load (Rated Load): 300 kg Maximum Lifting Capacity: 600 kg Maximum Loading Height: 3,380 mm Maximum Dumping Height: 2,060 mm Hydraulic Cylinder: Double-cylinder lifting system for even force distribution Operation: One-hand multi-function joystick for forward/reverse and lifting system Dimensions: Overall Width: 1,150 mm Overall Height: 2,300 mm Length with Bucket: 3,650 mm Turning Radius (outside): 2,400 mm Equipment & Safety (included): Quick coupler for tool-free changing of attachments Standard earth bucket (0.23 m³) Pallet fork Operator's protection roof with ROPS (rollover protection) and TOPS (falling object protection) Suspended seat with seatbelt and side protection bars LED work lights and rotating beacon CE certification Prices & Model Variants: Standard version: €13,500.00 net plus 19% VAT (€16,065.00 gross) Version with telescopic arm: €15,500.00 net plus 19% VAT (€18,455.00 gross) Sales exclusively to commercial enterprises (B2B). You will receive a proper invoice with VAT shown. Laedpfx Aoyzbdtenuec Warranty: 2-year manufacturer's warranty on spare parts. Rent with Option to Buy: Once the machines have arrived, we will offer weekly rental of our demonstration unit. If you subsequently purchase the machine, the amount paid for the rental will be fully credited towards the purchase price. Logistics & Contact: Location: 76332 Bad Herrenalb Loading onto your trailer or truck can be done free of charge on site using our crane. If you are interested in placing a pre-order or have technical questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M06I/9135, Offer Number: M06I/9135 Machinetype: double blow header Make: NATIONAL Type: 61LS Constr. year: 1980/2002 diameter range: 6,35 mm shaft length under head: 70 mm cutting length: 95 mm output pieces/min: 300 Location: Germany Lsdpfsyya N Sox Anuoac

Year of construction: 2020, condition: excellent (used), functionality: fully functional, 1 x Ethercat servo-driven horizontal flighted conveyor. This conveyor has an advanced servo system with a matched drive and motor which only works off Ethercat plc systems. Perfect for accurate 'start / stop' work. Manufacturer - Jinan Hiwell Machinery Co. Ltd. Model - LPJ600-4. Serial number - 1661962. Date of manufacture - 2020. Belt dimensions - 3900mm L x 600mm W. Ljdpfezdvb Nsx Anueac Electrical requirements - 220 V / 50 hz / 1 phase.

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 1731124010219J, Allpax Angle Sealing Device / Packaging Machine Manufacturer: Hualian Machinery Group Model: PTHW-WS-5045 Serial No.: 1731124010219J Year of Manufacture: 01/2024 Condition: used Color: light grey Internal Item Number: 2025120105 Pick-up Address: Industriestraße 5 (47918 Tönisvorst) The machine was in operation until dismantling. Ljdpfx Asx Ak Nronujac Tailor-made Solutions for Your Intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, as well as packaging machines, we are your competent partner! We are happy to provide you with an individual offer or advise you on system design or installation queries. Simply let us know your requirements and site conditions. Benefit from our years of experience and excellent network of experts. We have already successfully completed projects for companies in a variety of sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will find ways to optimise your processes and material flow cost-effectively and sustainably. We can also offer fully automatic sorting systems or complementary components, such as picking racks or containers.

Year of construction: 1998, condition: excellent (used), Technical detils : - Capacity - 500 nails/ min. Lasdpfsh Hp H Ssx Anuec - Power - 7 kw - Wire range - 1,0 - 4,2 mm - Nails lenght - 30 - 150 mm - Year - 1998

Condition: good (used), Year of construction: 2014, functionality: fully functional, Buffalo Machinery Microcut BNC 446, Fagor CNC 8055 TC control system, 8-position turret, tailstock, turning length 750 mm, swing diameter 250 mm. Laedpfjzc H Rmox Anuec