Used Maka Pe 70 for sale (18,955)

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Hedsvr A A Tjpfx Amyor Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work safety: - Mobile protective cabin with safety bumpers on the operator side. Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window - New Y-axis energy chain - New Z-axis energy chain - Various cables and air hoses replaced.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 21017403, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 5,900 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, number of slots in tool magazine: 32, controller manufacturer: BWO 900C, overall weight: 8,000 kg, year of last overhaul: 2024, spindle motor power: 12,500 W, mount diameter: 90 mm, number of spindles: 1, rotational speed (max.): 17,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in working order and in use will be available from 01.11.2024 at the earliest .After services and repairs are Vacuum pump, central lubrication, tool magazine, spindle . The machine connected to the network is possible to check and try out. In addition, on the equipment of the machine is a software with a postprocessor for the production of stairs and a laser projector. There is a possibility of training . Hedouyl Npjpfx Amyjr

Condition: repair required (used), Year of construction: 2005, functionality: unexamined, operating hours: 52,751 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, number of slots in tool magazine: 32, controller manufacturer: BWO, overall weight: 16,600 kg, controller model: CNC 920, continuous operating pressure: 6 bar, nominal power (apparent): 12 kVA, number of spindles: 1, rotational speed (max.): 20,000 rpm, rotational speed (min.): 1,000 rpm, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). Hsdpfev Rlpyox Amysr The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.

Condition: used, Foil Stamping & Embossing Machine Kolbus PE 70 with automatic Feeder and Pre-stacking conveyor. Heißfolienpräge- & Prägemaschine / Foil Stamping & Embossing Machine Kolbus PE 70 Baujahr / Year 1979 - Serial-No. 178 Open cover size  min.170 x 100mm - max. 660 x 405mm Printing surface 420 x 355mm Pressing power 35 tons Geschwindigkeit / Speed max. 70 cycles/min. Vorstapel Föderband / Case Pre-stacking conveyor Anleger für Buchdecken / Feeder for cases Deckenausbiege Station / Case bending station Folientransportvorrichtung / Foil transporting device Folienabwickelvorrichtung / Foil unwinding device Hsdpfx Asydfwzomyor Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1976, condition: used, Embossing machine Kolbus PE - PE 70 Year: 1976 Tandem configuration consisting of 2 interconnected Kolbus PE 70 embossing machines. - Case pre-stacking conveyor - Case bending station: DBA - Foil transporting device Hedpfxozat H Ao Amyjr - Case infeed 90° swivelling

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Available immediately Hodpfx Ajgiwl Demyjr

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 420 mm, number of axes: 5, controller manufacturer: SIEMENS, controller model: Siemens 840D sl / PCU 50 with NCU 730, spindle motor power: 26,000 W, spindle speed (max.): 24,000 rpm, This 5-axis MAKA PM 270 X CNC processing center was manufactured in 2012. It features an impressive X-axis travel of 9000 mm and Y-axis travel of 2700 mm, designed for workpiece thicknesses up to 60 mm. The machine includes a powerful milling spindle with adjustable speeds up to 24,000 rpm and a tool magazine with 32 positions for efficient tool changes. If you are looking to get high-quality milling and drilling capabilities, consider the MAKA PM 270 X machine we have for sale. Contact us for further details. • CNC control: Siemens 840D sl / PCU 50 with NCU 730; OP 15 control panel with 15" display on a guide rail along the longitudinal axis Hjdpfxey Uwrgj Amysr • Working area / machinable cube (with tool L/D 160 mm): • X: 9000 mm (with both gantries) • Y: 2700 mm • Z: standard cube size 420 mm • Custom-designed for workpiece thicknesses up to 60 mm • 5-axis unit • Portal 1: • Universal 5-axis milling unit • Spindle power: 20/26 kW (S1/S6) • Speed: up to 24,000 rpm, water-cooled • Tool interface: HSK F63, automatic tool change • Thread cutting possible • Chain tool magazine: 32 positions with rotary gripper; fixed on operator side • Portal 2: • 2 unit mounting consoles, each with 2 heavy-duty multi-spindle drilling units • Shared exhaust hood • 13 drilling spindles per unit (26 total), individually selectable vertically, L-shaped arrangement • 2 inclined drilling spindles adjustable 0–25° forward (1 right, 1 left), approx. 2.2 kW each, 2800 rpm • Drill chuck: Rego Fix ER 25 M • Machine table: • Base frame with linear guide • 12 table crossbeams on linear guides for X-positioning, each NC-driven and positionable • Vacuum supply integrated into the crossbeams • Each crossbeam individually vacuum-monitored and linked to machine control • Installation requirement: Foundation recess approx. 300 mm • Workplace safety: • Traveling safety cabin on both gantries • Safety bumpers and safety light curtain system on operator side and rear Additional equipment • Workpiece feed system: 1 belt conveyor with 4 belt strands (40 mm width each); each crossbeam with NC-controlled lifting device; stroke 110 mm mm) • Vacuum system: Bush vacuum pump type Mink MM 1322, suction capacity 250 m³/h, with 500-liter intermediate tank for rapid vacuum build-up • Chip handling: 2 chip conveyor belts under the machining area (for chips/small waste up to 100 x 100 x 100 mm) • Automatic central lubrication system

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC-controlled machining center for 5-axis machining CNC control Hjdpfsy S Hahsx Amyor Control type: bwo CNC 900 C, 512 KB RAM, PC 80486, 1 GB HD Controlled axes Travel distances: 14000 x 3300 x 200 mm Units Type designation: Milling motor HSK 63F Cooling: Water cooling Power: max. 20 kW Speed range: 1000-17000 min-1 Lubrication: Grease lubrication for 2000 operating hours Tool holder: HSK 63F Type designation: Chain tool changer Number of positions: 32, of which 4 are equipped with a torque support for holding angle/probing heads Holder: HSK 63F Diameter: 90 mm / arranged 160 mm Tool length: 160 mm Workpiece cube dimensions X-axis: max. 3300 mm Y-axis: max. 14000 mm Z-axis: 200 mm A-axis: +270° rotary axis B-axis: ±98° swivel axis

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Hedpfx Amsvmpx Reyjr Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Hedpfxjvmywqe Amyer Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: new, Ebara CDXHSM/A 70/05 centrifugal pump, serial number: 1615054900, unused, 100% functional, scope of delivery as shown in the photos. Hodpfx Aezkc Uvomyor

Year of construction: 2020, operating hours: 6,126 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, total operating hours: 6,126 h. Description: For sale is a high-quality climate test chamber from Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is designed for the simulation of temperature conditions and is ideally suited for: - Material testing - Electronics inspections - Environmental and aging tests - Quality and endurance tests Hsdpfx Aoyxm Ulsmyer The chamber can achieve both very low temperatures down to approx. -70 °C and high temperatures up to +180 °C, and can change temperatures at a defined rate (temperature ramps). Precise control allows for reproducible testing conditions. Operation is user-friendly via an integrated touch panel. Features: - Fast temperature changes (up to 5 K/min) - Even temperature distribution in the test space - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and operating hours counter included Technical Data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change speed: up to 5 K/min High precision & stability: Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time Spatial deviation: ±0.5 to ±1.0 K Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeat accuracy. Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side port: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A (approx. 2.9 kg) R23 (approx. 1.3 kg) Weight: approx. 1,200 kg For your security as a buyer, please note the following: The following checks are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered for you by phone.

Year of construction: 2006, condition: used, Printing machine, embossing machine, stamping machine, rail stamping machine, embossing press, die cutter, pneumatic die cutter -Manufacturer: Stommel 6 Voos, embossing press, rail stamping machine on a solid base -Type: SV700/6/PE/EF -Band width: 13 mm, convertible Hodpfx Amskyy Ufsyor -Individual components: see photos -Accessories: without other accessories -Dimensions: 820/520/H1680 mm -Weight: approx. 154 kg

Condition: used, mileage: 93,330 km, power: 110 kW (149.56 HP), first registration: 10/2009, fuel type: diesel, empty load weight: 5,600 kg, maximum load weight: 3,700 kg, overall weight: 9,300 kg, axle configuration: 4x4, wheelbase: 2,700 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 2,480 mm, loading space width: 2,030 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, cruise control, differential lock, fog lights, hydraulics, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, short cab, 1 air-suspended seat, rear window, electric window left, electric window right, air conditioning, Telligent shifting system, ABS (anti-lock braking system), differential lock, work lights, rotating beacon, trailer coupling with air and light connections, winter service equipment, green environmental badge. Wheelbase: 2700 mm, body: 3-sided tipper 8331, operating hours, transmission: DC-8 reversing gearbox UG100, two-circuit proportional hydraulic system with 3 sections, separate return line at the front and in the middle, pressure line at the front and in the middle for the 2nd hydraulic circuit, plow relief, differential lock front and rear axle, permanent all-wheel drive with lockable longitudinal differential, snowplow mounting plate, size 3, total weight: 17,300 kg. 8334 operating hours! Available at an extra cost: Hedpfxovhmuxo Amyor Snowplow Flötzinger -9393- DK-SA and spreader Gmeiner -9385- 1500 TC FS! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Charger Hedpfx Amsy Up Utoyor

Condition: used, mileage: 70,109 km, power: 213 kW (289.60 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, loading space length: 4,400 mm, loading space width: 2,430 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Well-maintained 18-ton MAN TGM 18.290 BL 4x2 truck with a Meiller 3-way tipper, automatic transmission, payload of 10.7 tons, air-suspended rear axle, high-performance engine brake, EVBec, trailer coupling with air and hydraulic connections for tipper trailers, air-suspended rear axle, air conditioning, reversing camera, German vehicle from first owner, and more. Short CC cab with rear window Euro 6 E diesel engine with 290 hp and 1,150 Nm of torque Unladen weight 7,342 kg Payload 10,658 kg Drive 4 x 2 Wheelbase 3,575 mm Meiller 3-way tipper, approx. 4,400 x 2,430 mm, side walls 600 mm high Front wall 800 mm high 6 recessed tie-down points in the floor Rear with swing-out tailgate MAN TipMatic 12.12 OD automatic transmission MAN TipMatic steering column lever control MAN Idle Speed Driving transmission function Trailer coupling, Ringfeder type RF40/G 150A with compressed air connections Permissible total weight 36,000 kg Trailer load with continuous braking system 21,657 kg Trailer load with SDAH/ZANH 16,000 kg Tipper hydraulic connections at the rear for 3-way tipper trailers Front axle with leaf springs and rear axle with air suspension Differential lock in rear axle Front axle 7,500 kg, rear axle 13,000 kg, HY axle Front axle load 7,100 kg, rear axle load 11,500 kg Stabilizers and shock absorbers on front and rear axles HY axle ratio i=4.63 Full brake assist Hill start assist MAN Easy Start Emergency brake assist EBA Lane departure warning LDW Reversing camera EBS with ABS and ASR ESP Hedoy Trypspfx Amyjr High-performance engine brake MAN EVBec, adjustable Disc brakes on front and rear axles Air conditioning Cruise control Dustbin in the cab Sun visor Folding rear underrun protection 2 LED rotating beacons on the cab roof Multi-function steering wheel LED daytime running lights and tail lights Roof hatch Large metal dustbin on the left for tools and accessories Electrically adjustable and heated exterior mirrors Electric windows Driver comfort seat with air suspension MAN EasyControl control panel, 4 functions Smartphone integration MAN Media System Advanced 7 inch MAN Sound System Very good and well-maintained condition German vehicle from first owner Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2609

Condition: used, mileage: 70,109 km, power: 213 kW (289.60 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, loading space length: 4,400 mm, loading space width: 2,430 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Exceptionally well-maintained 18-ton MAN TGM 18.290 BL 4x2 truck with a Meiller 3-way tipper, automatic transmission, payload of 10.7 tons, air-suspended rear axle, high-performance engine brake, EVB?ec, trailer hitch with air and hydraulic connections for tipping trailers, air-suspended rear axle, air conditioning, reversing camera, German vehicle from first owner, and more. Hsdpfx Aey Tryvomysr Short CC cab with rear window Euro 6 E diesel engine with 290 hp and 1,150 Nm of torque Unladen weight 7,342 kg Payload 10,658 kg Drive 4 x 2 Wheelbase 3,575 mm Meiller 3-way tipper, approx. 4,400 x 2,430 mm, sideboards 600 mm high Front wall 800 mm high 6 recessed lashing eyes in the floor Rear with swing-out tailgate MAN TipMatic 12.12 OD automatic transmission MAN TipMatic steering column lever operation MAN Idle Speed Driving transmission function Trailer hitch, Ringfeder type RF40/G 150A with compressed air connections Permissible total weight 36,000 kg Trailer load with continuous braking system 21,657 kg Trailer load with SDAH/ZANH 16,000 kg Rear tipping hydraulic connections for 3-way tipping trailers Front axle leaf-sprung, rear axle air-suspended Differential lock in rear axle Front axle 7,500 kg, rear axle 13,000 kg, HY axle Front axle load 7,100 kg, rear axle load 11,500 kg Stabilizers and shock absorbers on front and rear axles HY axle ratio i=4.63 Full brake assist MAN Easy Start hill start assist Emergency brake assist EBA Lane departure warning LDW Reversing camera EBS with ABS and ASR ESP High-performance engine brake MAN EVBec, adjustable Disc brakes on front and rear axles Air conditioning Cruise control Dust box in the cab Sun visor Foldable rear underrun protection 2 LED rotating beacons on the cab roof Multifunction steering wheel LED daytime running lights and taillights Roof hatch Large metal dust box on the left for tools and accessories Electrically adjustable and heated exterior mirrors Electr. windows Driver's comfort seat with air suspension MAN EasyControl control panel, 4 functions Smartphone integration MAN Media System Advanced 7 inch MAN Sound System Very good and well-maintained condition German vehicle from first owner Price NET plus 19% VAT. We will gladly send you attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2609

Condition: refurbished (used), Year of construction: 2015, operating hours: 2,350 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, fork length: 1,150 mm, empty load weight: 570 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION Our forklifts are technically overhauled according to FEM-4.004 and current safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Book a test on site and get expert advice – we will find the right solution for you. Industrial Truck Specifications Manufacturer: Jungheinrich Model: EJE C20 Low Level Pallet Truck Power Source: Electric Load Capacity: 2,000 kg Year of Manufacture: 2015 Operating Hours: 2,350 Lift Height: 750 mm Mast Type: None Initial Lift: Yes Overall Length: - Overall Width: - Overall Height: 1,400 mm Fork Length: 1,150 mm Unladen Weight: 570 kg Load Centre: 600 mm Tyres: Polyurethane Battery Type: Gel Hodpfx Amsy Rmzpoyjr Charger: On request

Year of construction: 2020, condition: used, PHCbi MCO-170AICUVH-PE CO2 incubator cabinet H2O2 decontamination Temperature: AT +5 ~ +50, ±0.1 °C Temperature uniformity: ±0.25 °C CO2 control range and fluctuation: 0 ~ 20, ±0.15 % Year of construction: 2020 Dimensions: 650mm x 620mm x 1000mm ( outside ) 480mm x 500mm x 650mm ( inside ) Weight: approx. 80 kg PHCbi Creating successful cell cultures requires an incubator that offers a high level of precision and safety and is easy to use. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unparalleled temperature and CO2 (and in some models O2) control when processing different cell cultures. These deliver long-term performance, are highly reliable and efficient. - inCu-saFe® interior (proactive contamination control, copper-enriched stainless steel alloy): combines the germicidal properties of copper and the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: the UV lamp isolated from the cell cultures decontaminates the circulating air and the water in the water tray without harming the cell cultures. - H2O2 decontamination technology: PHCbi's unique high-speed decontamination system uses gaseous H2O2, enabling time-saving and documented decontamination in the chamber with a high degree of safety. Electronic door lock that automatically locks the chamber during the decontamination phase. - Dual hot air sterilization (+ 180 °C). No interference and uninterrupted operation with stacked incubators during the sterilization cycle (model: MCO-170AICUVD-PE). - Long-term good performance, optimal cell viability and successful experiments. It also enables precise control of CO2 concentration and temperature with easy operation and maintenance. - Patented DHA direct heating and air jacket system*: high-precision temperature control for advanced temperature stability and fast temperature recovery times after opening the door. - Fast CO2 recovery times: with the PID controller and the dual infrared sensor, an ultra-fast CO2 recovery time is achieved without overheating. Even after opening the door several times. - The unique solid-state O2 zirconium oxide sensor in the multigas incubators enables precise control of physiological oxygen concentrations to simulate in vivo conditions. Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Hedpfxjtxarcs Amysr Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2020, condition: used, PHCbi MCO-170AICUVH-PE CO2 incubator cabinet H2O2 decontamination Temperature: AT +5 ~ +50, ±0.1 °C Temperature uniformity: ±0.25 °C CO2 control range and fluctuation: 0 ~ 20, ±0.15 % Year of construction: 2020 Dimensions: 650mm x 620mm x 1000mm ( outside ) 480mm x 500mm x 650mm ( inside ) Weight: approx. 80 kg PHCbi Creating successful cell cultures requires an incubator that offers a high level of precision and safety and is easy to use. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unparalleled temperature and CO2 (and in some models O2) control when processing different cell cultures. These deliver long-term performance, are highly reliable and efficient. - inCu-saFe® interior (proactive contamination control, copper-enriched stainless steel alloy): combines the germicidal properties of copper and the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: the UV lamp isolated from the cell cultures decontaminates the circulating air and the water in the water tray without harming the cell cultures. - H2O2 decontamination technology: PHCbi's unique high-speed decontamination system uses gaseous H2O2, enabling time-saving and documented decontamination in the chamber with a high degree of safety. Electronic door lock that automatically locks the chamber during the decontamination phase. - Dual hot air sterilization (+ 180 °C). No interference and uninterrupted operation with stacked incubators during the sterilization cycle (model: MCO-170AICUVD-PE). - Long-term good performance, optimal cell viability and successful experiments. It also enables precise control of CO2 concentration and temperature with easy operation and maintenance. - Patented DHA direct heating and air jacket system*: high-precision temperature control for advanced temperature stability and fast temperature recovery times after opening the door. - Fast CO2 recovery times: with the PID controller and the dual infrared sensor, an ultra-fast CO2 recovery time is achieved without overheating. Even after opening the door several times. - The unique solid-state O2 zirconium oxide sensor in the multigas incubators enables precise control of physiological oxygen concentrations to simulate in vivo conditions. - Condensation control: this prevents unwanted condensation in the chamber and possible contamination. Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved. Hedpfxetxacze Amyer

Year of construction: 2021, condition: used, PHCbi MCO-170AICUVH-PE CO2 incubator cabinet H2O2 decontamination Temperature: AT +5 ~ +50, ±0.1 °C Temperature uniformity: ±0.25 °C CO2 control range and fluctuation: 0 ~ 20, ±0.15 % Year of construction: 2021 Dimensions: 650mm x 620mm x 1000mm ( outside ) 480mm x 500mm x 650mm ( inside ) Weight: approx. 80 kg Hjdpfx Amotxakxeyor PHCbi Creating successful cell cultures requires an incubator that offers a high level of precision and safety and is easy to use. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unparalleled temperature and CO2 (and in some models O2) control when processing different cell cultures. These deliver long-term performance, are highly reliable and efficient. - inCu-saFe® interior (proactive contamination control, copper-enriched stainless steel alloy): combines the germicidal properties of copper and the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: the UV lamp isolated from the cell cultures decontaminates the circulating air and the water in the water tray without harming the cell cultures. - H2O2 decontamination technology: PHCbi's unique high-speed decontamination system uses gaseous H2O2, enabling time-saving and documented decontamination in the chamber with a high degree of safety. Electronic door lock that automatically locks the chamber during the decontamination phase. - Dual hot air sterilization (+ 180 °C). No interference and uninterrupted operation with stacked incubators during the sterilization cycle (model: MCO-170AICUVD-PE). - Long-term good performance, optimal cell viability and successful experiments. It also enables precise control of CO2 concentration and temperature with easy operation and maintenance. - Patented DHA direct heating and air jacket system*: high-precision temperature control for advanced temperature stability and fast temperature recovery times after opening the door. - Fast CO2 recovery times: with the PID controller and the dual infrared sensor, an ultra-fast CO2 recovery time is achieved without overheating. Even after opening the door several times. - The unique solid-state O2 zirconium oxide sensor in the multigas incubators enables precise control of physiological oxygen concentrations to simulate in vivo conditions Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,500 kg, cooling capacity: 50 kW (67.98 HP), volume flow: 10 m³/h, The Air Liquide cooling and heating system is a process thermostat designed for optimal and precise temperature control for any application demanding rapid, precise, and powerful thermal control between -80°C and +70°C. The temperature control unit works by thermally conditioning the heat transfer fluid Syltherm XLT within a closed-loop circuit. For cooling, liquid nitrogen (LIN) is used as the cryogenic medium to lower the fluid's temperature. For heating, an integrated electric resistance heater raises the fluid temperature to a maximum of +70°C. The conditioned fluid is then circulated from the unit to the external application to enable precise process temperature control. The system is fully automated, ensuring precise and reliable process control with minimal manual intervention. Original paper documentation is included. • Year of manufacture: 2016 • Manufacturer: ALTEC GmbH • Condition: Fully functional • Cooling Capacity: 50 kW • Operating temperature: -80°C - 70°C • Automation: Fully automated operation • Documentation: Original paper documentation included • Heat transfer fluid: Syltherm XLT • Heat transfer fluid flow rate: 10 m³/h • Material: Stainless steel 304L (1.4541) Hsdpfxewt A Eij Amysr Dimensions: • Width: 1800 mm • Height: 2000 mm • Length: 3500 mm • Weight (empty): 2500 kg • Insulation: PU foam and aluminium sheet cladding Potential Applications Include: • Pharmaceuticals: API synthesis, reactor cooling, vaccine storage, biotech applications. • Food Processing: Flash-freezing, quality preservation. • Aerospace/Automotive: Component testing, material treatment. • Electronics: Manufacturing and testing. • Materials Science: Cryogenic milling and processing. • Research & Development: Any application requiring precise thermal cycling. We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: used, Year of construction: 1973, Storage location: Nattheim Hedpfx Amovvkt Ujyor

Condition: new, empty load weight: 3,740 kg, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, sideboards 600 mm high, galvanized, loading height approx. 990 mm, 4 x tie-down points in the floor, each rated at 5 tons, 8 x tie-down points in the floor, each rated at 3 tons, reinforced gearbox support winch with load and fast gear at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Additional cost for: aluminum ramps (approx. 3,520 x 400 mm) with a load capacity of 10 tons per pair and 2 folding supports at the rear, price: 1,900 euros. Hodpfxozqtwbo Amyor Printing errors, errors and changes excepted, sample images. More details: !

Condition: used, mileage: 27,025 km, power: 346 kW (470.43 HP), first registration: 08/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Standard warranty, extended liability for material defects: 48 months or max. 200,000 km. Construction site package, trailer package, EBS, full emergency braking assistant, steering brake, roll-away protection, 2 rotating beacons on cab, LED lighting, preparation for rear-view camera, ASR, emergency braking assistant, lane departure warning system, PTO dependent on gearbox, MAN Media System Advanced Navi 7'', navigation map Europe+Russia, RIO BOX, smartphone integration, Rockinger SK5 tow coupling, broom and shovel holder, longitudinal side protection panels on the tipper side wall, bolted protective roof covering the entire width of the tipper body, PVC roll tarp, 3x tarp fasteners with tensioning strap and ratchet on the side. Hedpfevbny Nsx Amysr