Used Lrk-50 for sale (34,589)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: /, overall weight: 185 kg, load capacity: 50 kg, arm reach: 2,050 mm, pivoting range: 370 °, controller manufacturer: Fanuc, controller model: Typ R-30iB Plus, control cabinet width: 600 mm, control cabinet height: 500 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, FANUC industrial robot M-710iC/50 with 6 controlled axes and a maximum payload of 50 kg. The robot has a reach of 2,050 mm and is supplied with the R-30iB Plus controller, control cabinet type “A”, as well as 2 m robot cable and a 10 m teach pendant cable. Design complies with CE and NRTL directives. Axis 1 has a movement range of 370° (-185° to +185°) without a mechanical stop. Technical data: - Type: M-710iC/50 - Controller: R-30iB Plus - 6 axes - Payload: 50 kg - Reach: 2,050 mm - Rotation: 370° - Robot cable to mechanics: 2 m with UL Prjdpfx Afez E N T Ej Sjb - Teach pendant cable: 10 m - Control cabinet: Type “A” - Complies with CE and NRTL

Condition: new, Mini Cable Recycling Line with a capacity of 50-80kg/h The set includes: 11kW grinding mill - TORNADO 320 Compact dust removal system Belt conveyor Water separator - GOLD RIVER 300/1250 Technical data of the installation: Installed power - 13kW Power supply - 400V; 50Hz Podpjv I Skrefx Af Ssrb Batch efficiency - 50kg/h (this is a real value, checked on basic materials). Dimensions - 3500x3600x1950mm Weight - 950kg Spare consumables included. This is a set of high-quality devices created for cable recycling. The basis of the entire recycling process is proper fragmentation and separation, TORNADO series grinding mills have been designed so that the input material leaves the chamber in a short time, the enlarged sieve area and balanced rotation of the cutting rotor provide us with uniformly cut material fractions. The use of an innovative water system with pressure control valves in GOLD RIVER series separators allows for very precise separation of materials that are difficult to separate. The introduction of a new separation mat solution in combination with several other technical parameters allows for the separation of a single copper wire with a thickness of 15 microns [µm]. At the same time, maintaining the ideal purity of the plastic. Solid Polish workmanship supported by experience ensures a very long service life. The materials used for production are carefully selected in terms of type and meeting the appropriate strength parameters. We provide full post-warranty service throughout the country, we have every part for the offered devices. Recyclable materials: Aluminum cables of all kinds Car harnesses with adhesive insulation Computer tapes Network and telephone cables Coaxial cables, Christmas tree lights Copper wires filled with silicone or gels 15-micron winding coils, contaminated with plastic and sticky paper Winding coils filled with silicone coating IMPORTANT!! We provide real performance!

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, torque: 83 Nm, workpiece weight (max.): 200 kg, table load: 200 kg, overall weight: 3,960 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, coolant supply: 2 bar, spindle motor power: 13,000 W, Equipment: chip conveyor, CNC SIEMENS B40 D SPINDLE: Spindle taper: SK 40 Spindle speed: rpm 20 – 8,000 Spindle power: kW 13 / 9 Maximum torque: Nm 83 Rapid traverse X/Y/Z: m/min 12 Maximum feed force: kN 4.5 FEED DRIVE: Feed rate X, Y, Z: up to 12,000 Rapid traverse X, Y, Z: m/min 12 WORKING AREA: X-axis travel: mm 500 Y-axis travel: mm 450 Z-axis travel: mm 400 B-axis: -5° / +110° C-axis: 360° TABLE: Rotary tilting table: mm 630 x 500 T-slot spacing / Dimensions: mm 63 / 14H7 Center hole: mm 30H6 Rapid traverse: °/min 2,160 Podpoz E Su Ssfx Af Sorb Rotation area: 360° Clamping: Hydraulic Maximum load (table center): kg 200 INFRARED MEASURING PROBE: Length: mm 50 Diameter: mm 40 Weight: g 260 Maximum spindle speed: 1/min 1,000 Operating temperature range: °C +5 - +50 Storage temperature range: °C -10 - +70 CHIP CONVEYOR: Length: mm 3,120 Width (with coolant tank): mm 920 Scraper blade conveyor width: mm 275 Height: mm 1,550 Weight: kg 250 CHIP DISPOSAL: Maximum chip length: mm 100 Discharge height: mm 950 Discharge height, chip disposal hopper removed: mm 1,250 PUMP PERFORMANCE: External coolant supply – Volumetric flow: l/min 14 External coolant supply – Pressure: bar 2.0 Washing gun – Volumetric flow: l/min 14 Washing gun – Pressure: bar 2.0 MACHINE WEIGHT: Approximately kg 3,960 YEAR OF CONSTRUCTION: 2011

Condition: good (used), Year of construction: 1999, functionality: fully functional, controller manufacturer: Heidenhain, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DMG DMU 50 evo Year of manufacture: 1999 Prjdjz E A R Rjpfx Af Seb Heidenhain TNC 430 control 30-tool changer, SK40 Internal coolant system Chip conveyor

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 1,100 Nm, controller manufacturer: HEIDENHAIN, controller model: MILLPLUS, workpiece weight (max.): 330 kg, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, DECKEL MAHO DMU 50 EVOLUTION Universal Machining Center - Operating hours: see photos - Tool holder: SK 40 - Resolution of the measuring system X/Y/Z: 0.001 mm - Positioning tolerance: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool changer: 6 kg - Max. total tool weight in the magazine: 90 kg - NC rotary table with swivel axis, clamping surface: 500 x 380 mm - Distance of T-slots/size: 63/4 H 7 mm - Centering bore diameter: 30 H 6 mm Prodpfezlgnvex Af Ssb - Max. revolutions of the table top (rotary axis): 33 rpm - Max. swiveling torque: 1400 Nm - Swiveling speed: 26 rpm Attention: The item must be picked up between October 7th and October 14th, 2026, on a date to be agreed upon. FCA D-35576 Wetzlar - loaded onto a truck.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 500 050, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 82 Nm, controller manufacturer: Grundig / Heidenhain, controller model: MillPlus, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 50 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total length: 2,200 mm, total width: 1,800 mm, table width: 500 mm, table height: 800 mm, table length: 700 mm, table load: 200 kg, rotary table diameter: 500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 9,000 rpm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, Deckel Maho DMU 50 T – CNC Universal Milling Machine (Year of manufacture: 1996) For sale is a well-maintained and fully functional CNC universal milling machine, the Deckel Maho DMU 50 T, equipped with the proven MillPlus control system. This machine is ideally suited for toolmaking, the production of single parts and small series, and for training workshops. Key features: Control system: MillPlus (Deckel Maho) Travel ranges: X = 500 mm / Y = 400 mm / Z = 400 mm Table: Swiveling rotary table for flexible 5-axis machining Spindle: SK40, up to 9,000 rpm Equipment: Full enclosure with sliding doors and ergonomic control panel Sales and transport conditions (Incoterms): Sales condition: EXW (Ex Works / Ex Location) Dismantling & Loading: Dismantling, removal from the building, loading, and transport must be completely organized and carried out by the buyer (at their own expense and risk). Dismantling can also be carried out for a fee. Various accessories included. Prodoz D Ab Tspfx Af Seb The machine can be inspected on-site by appointment.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Kilia Bowl Cutter 50 Litres Meister Plus Vario with Hand and Knee Operation Condition: Factory reconditioned with 6 months warranty. The Kilia 50 litre Meister Plus Vario is a powerful universal high-speed bowl cutter for the production of fine and coarse sausage products as well as many other products. The machine impresses with its compact design, high-quality stainless steel construction and modern, infinitely variable drive technology for precise mixing and cutting. The machine is equipped with a 6-knife head, infinitely variable knife shaft drive with forward and reverse operation, infinitely variable bowl drive, electric knife shaft brake, temperature cut-off, revolution counter with automatic stop, central lubrication for the knife shaft and plate shaft bearings, as well as a 7-inch touch display as an alternative operating solution. In addition, the machine features hand control and knee control for particularly practical and ergonomic operation. The noise protection cover is included, and the knife cover is manually operated. An electric knife cover drive is optionally available. Technical Data: Bowl volume: 50 l Capacity: approx. 35 kg Knife speed mixing/cutting: 50 to 5,100 rpm Prsdpjzcux Sofx Af Sjb Reverse knife shaft operation: 50 to 500 rpm Knife tip speed: up to 97 m/s Bowl speed: 7 to 20 rpm Knife drive: infinitely variable Bowl drive: infinitely variable Time/revolution cut-off: yes Temperature cut-off: yes Central lubrication: yes Remote control: yes Touch control / hand control / knee control: yes / yes / yes Hydraulic knife cover drive: – Hydraulic ejector: – Manual ejector: – Recipe manager KPV: optional Scale: optional Standard Electrical Data: Knife shaft drive power: 12 kW Bowl drive power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Customer-side pre-fuse: 32 A

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Prsdpfx Afsz Dp Dbo Seb Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: used, Year of construction: 2005, operating hours: 11,100 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The machine is still in operation and can be tested while powered. Available from approximately December 2026. At approximately 10,000 spindle operating hours, the spindle was re-bearinged, and the ball screws in the X, Y, and Z axes were replaced. Includes Heidenhain probe. Tool holder: SK 40. The zero-point clamping plate shown on the table will be removed and is not included in the sale. Prjdpfx Afez Damto Seb

Condition: used, Year of construction: 1990, machine/vehicle number: 9417, functionality: fully functional, operating hours: 85,640 h, power: 28 kW (38.07 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 50 t, stroke length: 51 mm, total length: 1,820 mm, total width: 2,890 mm, total height: 3,090 mm, Pressing force: 50 t Adjustable ram stroke: 16 - 51 mm (currently fixed at 51 mm) Podpfx Ajzp Ukyef Serb Ram adjustment: 64 mm Table clamping surface area, approx.: 930 x 590 mm Number of strokes per minute: 100 - 750 min-1 Power consumption: 28 kW

Condition: good (used), Year of construction: 2007, operating hours: 63,868 h, functionality: fully functional, machine/vehicle number: 413089, clamping force: 500 kN, screw diameter: 30 mm, overall weight: 3,400 kg, We are selling a fully functional EE50. It is connected to the power grid and can be inspected at any time. Accessories: Psdpfx Aez Dq N Sjf Sjrb Handling interface EM67.

Year of construction: 2021, condition: used, overall weight: 27 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Psdpfxjz Ali Hj Af Ssrb

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 3 - D Bending with fully automatic process controlled by NC Pjdjz Dntuspfx Af Sjrb Maximum pipe diameter: 50 mm Includes 3 bending dies: 26.9 mm, 33.7 mm, 42.4 mm Used very little, therefore in very good condition.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated Pjdpfx Aoziz S Def Sorb • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Horizontal baling press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device, semi-automatic. Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity at bulk density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. The video can be found on our website or our YouTube channel. The operating manual is available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Prjdpsz A T Tqofx Af Sob The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg Prjdpfx Afezyu Ums Seb max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table

Condition: like new (used), functionality: fully functional, Year of construction: 2006, operating hours: 1,608 h, screw conveyor diameter: 50 mm, Krauss Maffei KMD-50K in very good condition for sale. This extruder comes from the first owner and was used in a technical laboratory – original 1608 operating hours! Delivery includes documentation, hopper, and adapter. An inspection while the machine is powered on can be arranged at any time. Technical specifications: - Model: Krauss Maffei KMD-50 K - Year of manufacture: 2006 Pjdpez A Rvvofx Af Sjrb - Operating hours: 1608 - Weight: 1800 kg - Standard profile screw - Closed screw temperature control Loading via forklift. Delivery, export documents, or training can be arranged upon request. Please feel free to contact us if you have any questions.

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min tool taper SK 50 number of tool places 26 Pos. Number of working hours ca. 50.884 h connected load 69 KVA weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor - External belt filtration system Prjdpfxjz Ek D Sj Af Sjb Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 1998, Used 2500 mm bending machine by Safan Type: SMK 50 2550 TS1 Capacity: 2550 x 50 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 Podpfxezvyg Hj Af Ssrb Year of manufacture: 1998

Condition: as good as new (ex-display), Year of construction: 2022, Features: - E-Control 20 Dual Screen with bending sequence simulation - 6-axis back gauge with 100 mm stroke (right ±50 mm) - E-Bend S sensor for thickness control on Z1 Predpfx Afjz A Tg Ds Sob - Wila NSCR-II HC Premium table - Wila NSCL-II HC Premium tool holder - Pair of front sheet metal supports - Bending force: 500 kN - Usable bending length: 2,040 mm - Usable stroke: 300 mm - Maximum opening: 590 mm - Rapid approach speed: 160 mm/sec - Interface for Industry 4.0 - Standard tool kit

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 221005, functionality: fully functional, Technical Data – AICHELIN Pusher Furnace System Manufacturer: AICHELIN Type: DHLG-50/50/50 System Type: Gas-heated Pusher Furnace Year of Construction: 2012 (system) Control System: Siemens S7-400 Machine No.: 221005 Electrical Data Connected Power: 261 kW Rated Current: 383 A Supply Voltage: 400 V / 50 Hz Furnace Data Heating: Natural Gas Max. Furnace Temperature: 500 °C Protective gas operation possible Continuous pusher operation Batch Data Pjdpjzf Upnefx Af Ssrb Max. Batch Weight: 10,000 kg Continuous heat treatment of large series components Application Area Hardening Tempering Stress-relieving annealing Preheating Heat treatment of forged and cast parts Gearbox and drive components Equipment Siemens S7-400 control system Automatic loading and pusher system Gas-heated industrial furnace Protective gas atmosphere possible Fully automatic series operation Typical Applications Automotive industry Forging operations Gearbox manufacturers Heat treatment companies Supplier industry Special Features Very high batch capacity of up to 10 tons Modern Siemens PLC control system Energy-efficient gas heating Suitable for high production volumes in 3-shift operation Ideal for the heat treatment of gearbox parts, shafts, gears, and forged parts This AICHELIN DHLG-50/50/50 is a modern industrial heat treatment system and is significantly more valuable than a comparable standard tempering or chamber furnace. The system is particularly interesting for forging companies, gearbox manufacturers, foundries, and contract heat treatment companies.

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t chamfer lenght: 2550 mm distance between columns: 2045 mm Prsdsu Ib D Eopfx Af Seb throat: 250 mm stroke: max. 170 mm back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *

Condition: used, Year of construction: 2000, machine/vehicle number: 11.985, functionality: unexamined, input voltage: 400 V, type of input current: three-phase, throat depth: 1,600 mm, Radial drilling machine Reform RB 50/16, year of manufacture 2000, machine no. 11,985. Prodpsz A Ulujfx Af Sob Connection 400 V, 50 Hz, total power 6.5 kW. Drilling capacity in steel 50 mm, arm reach 1,600 mm. Equipment: Digital display Acu-Rite, clamping cube and clamping table with T-slots, T-slot base plate. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; dismantling and loading to be arranged. All information without guarantee.

Condition: like new (used), Year of construction: 2022, operating hours: 458 h, functionality: fully functional, machine/vehicle number: 1536582684A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 30 kVA, torque: 83 Nm, workpiece height (max.): 550 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 3,500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13 W, number of spindles: 3, number of slots in tool magazine: 30, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this DMG MORI CMX 50 U universal machining center, in like-new condition. Operating hours: Power-on hours: 458 h / Spindle: 330 h, year of manufacture 2022. TECHNICAL DATA Axis travels: • X = 500 mm • Y = 450 mm • Z = 400 mm • B = -5° / +110° • C = n × 360° Work table: • 630 × 500 mm pivoting rotary table • 7 T 14 H7 grooves, 63 mm pitch • Central hole Ø 30 H6 • Permissible table load: 200 kg • Axis – table distance: 150–550 mm Main spindle (inline spindle): • Speed: 20 – 12,000 rpm • Power: 13 kW (40% DC) / 9 kW (100% DC) • Torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool shank: SK40 DIN 69871 • Clamping according to DIN 69872, hydraulic control • Clamping force SK40/BT40: 10 kN Tool magazine: • 30 positions, chain with double gripper • Max. tool diameter: 80 mm (130 mm with adjacent pockets free) • Max. tool length: 300 mm (from the spindle face) • Max. tool weight: 8 kg • Max. magazine load: 120 kg • Tool change time: 2.7 s Feeds and accuracy: • Rapid feed rate X/Y/Z: 30 m/min • Max. feed force (40% DC): 4.5 kN • Linear guide rails with rollers on all axes • Direct measuring system on X, Y, Z (including air purge) • Positioning accuracy X/Y/Z: A = 6 µm (ISO 10791-4) • Repeatability X/Y/Z: R = 5 µm (ISO 10791-4) • Accuracy B/C: A = 16 seconds of arc (ISO 10791-4) • Repeatability B/C: R = 12 seconds of arc (ISO 10791-4) INCLUDED EQUIPMENT Base machine: • CMX 50 U universal machining center (C-A3390F) • DMG MORI SLIMline Multi-Touch 19" / Siemens 840D SL control (C-B3097F) • Coolant or air, switchable via M functions • Chip tray / drawer • Enclosure with sliding door • DMG MORI IoTconnector included as standard 20 bar production package with chip conveyor (C-K3661F): • Internal 20 bar coolant supply • Scraper-type chip conveyor, 250 l tank (left) • Washing of bed and ATC arm via M function • Coolant spray gun • External electronic handwheel • Enclosure roof • 4-color signaling lamp • Double cartridge filter (filter change without stopping the machine) Pedpfjz Epnvox Af Ssrb Measurement / monitoring: • Renishaw measuring kit for Siemens (C-K4222F): PP40 probe with optical transmission, TS27R tool probe, measuring cycles with tool breakage monitoring, dummy tool and calibration ring • 3D QuickSET for CMX U (C-K2530F) – control and compensation of 5-axis kinematic accuracy Software and documentation: • DXF Import option on Siemens controller (C-G3067F) • Documentation in Romanian • Screen text in Romanian DMG MORI Digital Products: • Digital production package: IoTconnector, machine data connector MDC (OPC UA / MTConnect / MQTT), NETservice (remote diagnostics) • Messenger V4 – machine status in real time • DMG MORI Service Agent – preventive service warning • Machine 3D model in STEP format (upon signing of NDA, for CAD/CAM) NUMERICAL CONTROL – Siemens SINUMERIK 840D SL • TCU30.3 console, NCU720.3B PN • Safety Integrated • 19" multi-touch screen, 1024 × 1280 • Block processing time: 1.5 ms • User memory 16 MB + 4 GB extension (EES) CONNECTIONS • Standard 12,000 rpm: 30 kVA / 47 A / 50 A fuse at 400 V • With 20/40/80 bar package: 32 kVA / 50 A / 63 A fuse at 400 V • Voltage: 400 V / 230 V, 50/60 Hz, ±10% • Air: 6–8 bar, average consumption approx. 30 m³/h

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 165 m³/h, Equipment: type plate available, We are offering this very well-maintained BITZER refrigeration compressor, model HSEM6461-50-40P, manufactured in 2015. Manufacturer: BITZER Model: HSEM6461-50-40P Year of manufacture: 2015 Condition: very good Category ID: 265 Type ID: 1102 Machine type: Compressor Podpfx Afsz D Duuj Sorb If you have any questions or require further information, please do not hesitate to send us a message or call us.