Used Linia Do Grochu Pea Processing Line for sale (32,930)

Condition: excellent (used), For sale: a complete unit for processing green peas, combining a winnowing machine, a de-stoner, and a vibrating screen washer in one. Capacity: approximately 6 tons/hour. Njdpfjzhv Nuox Ahkowk

Condition: ready for operation (used), For sale: a pea processing line, which includes: - Air separator - Destoner - Sieve - Flotation washer - 2 x Hydro transport systems The photos show the actual equipment being sold. Nodpezhv E Nefx Ahkewk

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: Nwedpotzmifefx Ahksk -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: excellent (used), Year of construction: 2000, The line is fully operational, modernized in 2019. Among others, : Hydraulic installations and control. Nsdpfx Aeim Ez Dshkswk minimum material thickness - 20mm max material thickness - 130mm minimum material width - 30mm max material width - 130mm minimum input length of the material - 250mm max input length of the material - 1600mm minimum output length of the material - 250mm max output length of the material - 300mm

Operating hours: 12,000 h, condition: good (used), functionality: fully functional, Raster press punching line which includes: Njdpfsryu Taex Ahkowk 1) Dimeco Alipresse type 2330DF unwinder with SV tracking and speed change system. 2) Dimeco Alipresse type 1645 powered straightener with SV tracking and speed change system. 3) Raster eccentric press Type HR 60 SL-4 S with soundproof enclosure . Parameters in the photos. 4) Documentation.

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder Nedpjzvmx Aefx Ahkewk - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device - Double-sided IMA COMBIMA for transverse machining 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Nwsdpfezuypxsx Ahkjk Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Profile trimming blade Surface trimming blade Buffing unit Smoothing unit - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1997, A 1.5-times linked IMA edge processing line with automatic Venjakob workpiece transfer is offered. Max. working width: 2500mm, transfer angle: 90°, distance between the workpiece edges: 6000mm. Control system: Siemens S5. Including peripheral equipment and conveying system. Required installation space: approx. 250-300m², overall dimensions X/Y: approx. 19000mm/13600mm. IMA. Operator PC: renewed in 2018. Inspection possible by appointment. Nwodpfx Aozh Nh Rshkek

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Nsdpfxsxn T Smj Ahkowk Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2017, zpracování slabé hmoty - délka výřezů od 1300 - 4500 mm - průměr kmene od 130 - 350 mm - 100 m3 / směnná výroba - celkový příkon 230 kW. ​Vyhledat podrobnosti 137 / 5 000 Njdpfx Ahenqzkpokjwk Výsledky překladu Výsledek překladu processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW.

Year of construction: 2017, condition: used, processing weak matter Nwodpfx Ahenwm R Nokek - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, The log processing line includes the following units: Nwedpfxszg Dl Ij Ahkok • log splitting band saw – ELCA SNV14 • log handling carriage – ELCA CMOL33 • planer – ELCA PTL1000 • cross-cutting circular saw – ELCA TRCBT3 • multiple-blade rip saw – COSTA LEONE 2160 • log profiling system – VISION_1200 • material handling systems required for servicing the processing line ◦ cross conveyor chain conveyor ◦ roller conveyor • band saw sharpening machine – ALIX AF 518 • dust and chip extraction system – VENTIL VENETA, model PF/JET, designed specifically for the system

Year of construction: 2011, condition: ready for operation (used), A complete Facma/Cerquetani hazelnut harvesting and processing line for processing hazelnuts from crop reception through sorting, cleaning and grading is available. 1) Facma hazelnut harvester. 2) Ditta Cerquetani Antonio collection and transport trailer. 3) Facma combined processing, cleaning, rotary screen and screening unit. 4) Facma washing and wet cleaning unit. 5) Drying system with drying silo, blower and electrical control cabinet. 6) Facma inclined conveyor with feed hopper. 7) Facma horizontal conveyor and selection belt. 8) Facma sorting, inspection and grading table. Including various peripheral equipment and accessories. Documentation available. Inspection on site is possible. Nodpfx Ahjznx Ndekowk

Condition: used, Nieużywana i nigdy nie zainstalowana linia do napełniania fiolek produkcji Steriline, wyprodukowana w 2021 roku, o wydajności do 24 000 sztuk fiolek na godzinę. Linia została zaprojektowana do pracy w systemie zamkniętym oRABS (Open Restricted Access Barrier System) i obecnie jest w stanie napełniać fiolki o rozmiarach 6R (5 ml) i 2R (2 ml) zamykanych korkami do liofilizacyj / iniekcji lub aluminiowymi kapslami. (Producent może dostarczyć części wymienne do fiolek i korków o innym rozmiarze.) Nsdezi D Izepfx Ahkswk W skład linii wchodzą urządzenia wymienione poniżej: Główne urządzenia wchodzące w skład linii: - Rotacyjna maszyna myjąca RC-V8 - Tunel depirogenacyjny ST9-CCS - Ładowarka tacek / TL2 - 4 Urządzenia LAF (laminarny przepływ powietrza) - Napełniarka fiolek VFM400 + oRABS - Przenośnik taśmowy SWB1 + oRABS - System rozdzielania dodatniego PDS + oRABS - Zamykarka fiolek VCM400 + oRABS - Przenośnik taśmowy SWB2 - Przenośnik taśmowy LBT - Przenośnik taśmowy SWB3 - Stół obrotowy RT Pełne specyfikacje projektu dostępne wraz z instalacją.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: mse mail inserter, Bluecrest epic mail inserter / folder Nwsdpjzkli Nefx Ahkek processing speeds of 22,000 mailpieces per hour hi input accumulator / folder 4 station chassis current windows barcode 2D reading cameras for mail matching

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The offer includes a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. It is designed for the production of: • round, marked buns • elongated, unmarked buns • cut buns • twisted buns • Kaiser rolls Nedoy And Nspfx Ahkswk • hot dog buns • Poznań-style buns Product description: • Fully automatic and compact bun production line • Based on a Mini Rex Futura divider-rounder from 2009, which is rotary • 2-row operation • Manual removal of products from the discharge conveyor • Marking station with easily replaceable tools; includes heads for: Kaiser rolls and Korinsky buns • Integrated elongation and flattening unit • Weight range: - for marked buns from 25g to 75g dough piece weight – output: from 1,800 pieces/h to 2,640 pieces/h, - for unmarked buns 80g - 125g dough piece weight – output: from 1,800 pieces/h to 3,960 pieces/h. • Fermentation time: approx. 6 minutes at an output of 2,000 pieces/h • Dough types: wheat, whole wheat, yeast dough, donuts. • Single-person operation The machine is in the final stage of renovation. The attached photos show its current, actual condition. If you are interested in the price and would like to see more photos, please contact us.

Condition: used, Kebab Line Frey KL6 260 The Frey Kebab Line KL6/260, combined with the Frey F-Line F260 vacuum filler, is a powerful and professional solution for industrial kebab production and meat processing. This automatic kebab production line produces up to 28 portions per minute and processes discs with diameters of 100–300 mm, making it ideal for döner, kebab, and shawarma applications. The Frey F260 vacuum filler ensures precise and consistent portioning with a capacity of up to 7,300 kg/hour. Thanks to its powerful vacuum technology, stainless steel construction, and user-friendly touchscreen control, this combination is perfect for companies requiring high quality, efficiency, and reliable production. Features include: - Consistent portioning using vacuum technology - Adjustable shapes and sizes for flexible production - Hygienic, durable, and easy-to-clean design - Ideal for food processing, meat processing, and kebab production facilities - This kebab production line is fully manufactured from stainless steel (SS). Specifications: - Production capacity: 28 portions/min - 6 loading stations providing 2 workstations - Adjustable disc diameter: 100–300 mm Nedpfozfzfpox Ahkewk - Adjustable disc thickness (height): 10–50 mm - Voltage: 400 V (3 + N, 50 Hz) - Power: 11.4 kW - Weight: 1,374 kg - Year of manufacture: 2014 - Compressed air connection: 6–7 bar (5,600 l/h) - Dimensions of complete line (W × D × H): 3470 × 1330 × 2020 mm

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Nedpfx Ajyhzhhehkswk Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Nsdpfx Ahsxw Rcujkowk Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Nwjdpeif Sg Sefx Ahksk Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion Nwjdeq Nywxepfx Ahkjk A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.

Condition: excellent (used), Year of construction: 2017, Processed Cheese Blending Line & Inline Cooker UHT Line Nwedpfx Asy Uuvvehkjk Ideal for processed cheese, suitable for IWS, triangle, and foil wrapped packaging. Manufacturer: Karl Schnell GmbH & Co. KG, Germany. Capacity of the line end product: 300/500/800/1.500 kg/h output. Year of manufacturing: 2009-2012-2017 A) Processed Cheese Blending Line 1. Trolley Elevator 2. Grinder 3. Conveyor 4. Blender 1 – 1,500 kg with buffer 5. Blender 2 – 1,000 kg with buffer 6. Pigging system B) Inline Cooker UHT Line 7. Buffer Tank – 15 °C 8. Inline Cooker – 15 -> 80 °C 9. Buffer Tank – at 80 °C 10. UHT 80-142-80 °C 11. Creaming Tank 80 °C 12. Inline Viscosity Meter 13. Option: Deaerator and homogeniser

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Nwsdjw Ahg Rjpfx Ahkjk Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Year of construction: 2026, condition: new, Complete turnkey production lines for slitting, cut to length, combined slitting-cut to length and press feeding systems. Bosporas Machinery is a manufacturer of coil processing and press feeding systems, delivering high-performance and customized industrial solutions worldwide. We provide complete turnkey coil processing lines designed for modern sheet metal production facilities. Our solutions cover the full process from coil loading and feeding to cutting, recoiling, stacking and automation. Whether for new factory investments, capacity expansion or modernization projects, Bosporas offers reliable, efficient and customized production lines tailored to your material specifications, production targets and factory layout. From standalone machines to fully integrated automatic systems, we deliver complete engineering solutions with international project experience. ⚙️ AVAILABLE SOLUTIONS Coil Slitting Lines: For precise longitudinal cutting of coils into narrower strips with recoiling solutions. Cut to Length Lines: For accurate sheet cutting with stacking systems for flat sheet production. Combined Slitting & Cut to Length Lines: Flexible systems capable of both slitting coils and producing cut sheets in one integrated line. Nwsdpfxey A Ia Ds Ahksk Compact Press Feeding Systems: Integrated decoiler, straightener and servo feeder solutions for press automation and stamping operations. 🔧 LINE CONFIGURATION Depending on the project, production lines may include: Hydraulic Coil Loading Car Decoiler / Uncoiler Systems Straightener / Leveler Units Servo Feeder Systems Slitting Head Rotary / Hydraulic / Mechanical Shear Scrap Winder Systems Tension & Separator Units Recoiler Systems Automatic Stacking Systems Conveyor Systems PLC & HMI Automation Safety Systems & CE Compliance Options ⚙️ ENGINEERING FEATURES Custom machine design according to customer requirements High precision processing performance Heavy-duty machine construction Servo-controlled feeding and automation Modular structure for future upgrades User-friendly control systems Reliable operation for continuous industrial production ⚡ OPERATIONAL ADVANTAGES Complete turnkey production solutions Single supplier for the full project Reduced labor and production costs High efficiency and consistent product quality Fast installation and commissioning support Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Steel service centers Sheet metal processing companies Automotive suppliers White goods industry Construction materials production HVAC manufacturers Metal furniture and component production General industrial manufacturing 🧩 OPTIONAL CONFIGURATIONS Customized line capacities Different thickness and width ranges Full automation packages Factory layout engineering Remote support solutions Spare parts and training packages 📸 REFERENCE PROJECTS You can see and review our completed (manufactured and installed) projects on our Youtube channel. For machine videos and references, please visit our YouTube channel. You can search on Youtube as Bosporas Makina / Ayika Group.

Year of construction: 2007, condition: new, functionality: fully functional, UNUSED Complete Potato Processing and Frying Line (2007), Installed But Never Commissioned Capacity: approx. 1,000 kg/hour Nedpfx Aey Axfkehkewk This is a rare opportunity to purchase a complete European industrial line in near-new condition at a fraction of the replacement cost (>€1.5M). Key Features: - UNUSED – 0 operating hours - Installed but never put into production - Complete line: input → frying → cooling → packaging - High-quality European manufacturers - Immediate availability Main Equipment: - Blancher – Komen-Kuin (UNUSED) - Vibrators – Kiremko / Atraco (UNUSED) - Frying Line – Florigo (UNUSED) - Conveyor Belt – Florigo (UNUSED) - Pre-Refrigeration – Ferguson (UNUSED) - Refrigerator & Control Panel – Ferguson (USED, included) - Packaging Machine – Campagnolo (UNUSED) - Boiler Station – Maxxtec (UNUSED) - Oil Tank – Florigo (UNUSED) - General Control Panel (UNUSED) Condition: The majority of equipment is UNUSED (0 hours). Installed but never commissioned. Location: Greece Availability: Immediate Inspection: Available Dismantling & loading support: Provided Note: Priority will be given to buyers interested in the full line. Serious inquiries only.