Used Leisse Wema Probst Vrz 3 for sale (64,266)

Year of construction: 2008, condition: excellent (used), Sorting system for small-diameter wood and stakes Nodpfxswqdc Re Ag Ielh for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Sorting system for small-diameter wood and stakes for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Nljdpfx Aowqf S Hjg Ish Ready for demonstration.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Ventilator VRZ 1120/63/3 WSN 180, power: 55 kW (74.78 HP), Radial industrial fan with a robust, welded sheet steel construction. Operational volume flow: 9.0017 m³/s; total pressure difference: 2001 Pa; shaft power: 20.8 kW. Low operating hours, as it was used exclusively for testing purposes. Very good condition. Very high brand quality: Zenner fan; consoles, impellers, and housing are fully welded; Küenle motor. Njdpfxozzaz Is Ag Ielh Includes a set of vibration dampers, compensators with guide vanes on the pressure and suction sides; color: blue according to RAL 5015.

Condition: excellent (used), The milling cutter motor has a power of 37 kW, and the roller drive motor has a power of 4 kW. Nedpfx Agezxc Ais Ielh

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. Nljdpfx Ajwt Abwsg Ish The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Year of construction: 2013, grinding diameter 300 mm grinding depth 300 mm Travel distance - Z1 470 mm Travel distance - X1 200 mm Tilt angle - B2 1/1000 ° power capacity 3,5 kW Travel distance - Z2 470 mm Travel distance - X2 325 mm Drive power – External grinding spindles 16,5 kW Nlodozfqiwepfx Ag Ish 120 mm grinding diameter - cylindrical 400 mm sanding belt length 400 mm grinding wheel size Ø 500 x 50 x Ø 127 mm Travel distance - U 470 mm Tilt angle – B1 with longitudinal adjustment -1/+12 ° Tilt angle - B1 with workpiece spindle unit -20/+30 ° Manual longitudinal adjustment of the workpiece sp 470 mm Drive power – workpiece spindle 3,8 kW turning speeds 1-895 U/min Load capacity - Spindle head 200 kg Centre height above the swing bridge 200 mm total power requirement 47 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,54 x 2,83 x 2,3 m Accessories / Equipment: - Pneumatic dressing wheel that extends into the working area (mounted behind the workpiece spindle) - Coolant system with paper belt filter - Central lubrication - Spindle cooling - Documentation

Condition: used, Wema Probst profile milling machine Nsdpfx Asc N N U Neg Ielh Main motor: 11 kW Disassembled and ready for loading.

Condition: new, Heidenhain VRZ 770 G 3-axis counter Id. 249 904 02 SN:4437173, unused in opened original packaging, 100% functional, delivery contents as shown in photos Nlodpfx Aex Eturjg Ieh

Condition: like new (used), Year of construction: 2004, operating hours: 2,177 h, functionality: fully functional, machine for producing cylindrical logs with a diameter of up to 400 mm and a length of up to Nlodpfx Agjzcgtbs Ieh 10 m.

Condition: excellent (used), For sale: a robust WEMAS column milling machine, model FM23. Cast iron construction, very rigid, ideal for tool rooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital position readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant with a separate tank and pump. Vertical spindle with a precision collet and adjustable feed. Power supply: 3×400 V. The machine is complete, has undergone a recent inspection, runs smoothly, and is ready for testing under power. It shows normal signs of use – without any disqualifying play or looseness. Included in the price: 3-axis DRO display, scales on the X/Y/Z axes, coolant tank and pump, hoses, power cable, work light. Additional information from the photos: “WEMAS” and “FM23” nameplates, spindle setting correction plate, DRO panel with mm/inch functions, ABS/INC, calculator. Working parameters, spindle taper, and speed ranges to be confirmed on-site – I can measure the table and X/Y/Z travels. Nodpfx Aez Slaqsg Iolh Loading with a forklift is possible. I can assist with organizing transport.

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Multiple programs can be stored for turning and milling operations. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via belt drive; within the stages, operation can be continuously adjusted using a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end-of-travel shut-off. Njdpfx Aezfwm Nog Islh Hydraulic copying slide with V-shaped tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center punches, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition from a small carpentry shop. The machine obviously was not used for high-volume production. Dimensions approx. 2600 x 1300 x 1300mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this seller".

Condition: excellent (used), functionality: fully functional, fuel tank capacity: 10 l, color: original, overall weight: 570 kg, empty load weight: 570 kg, operation weight: 570 kg, lifting power: 150 kg/m, Year of construction: 2015, operating hours: 1,400 h, Equipment: pallet forks, Probst Jumbo-BV-Vario vacuum kerb lifter. In perfect working order but has some age related marks. Very well maintained and regularly serviced. This machine enables the laying of up to 400m of kerbs to be laid daily with just one operator feeding the kerb layer with no manual handling and just moving levers! Honda GXV390 petrol engine which is bullet proof when filters are cleaned regularly. Also available with the machine are Quick Hitch fork attachments to suit a Manitou telehandler and numerous different lifting plates to suit a variety of kerb shapes and sizes. Videos are available of the machine working. Nedpfoxvqclsx Ag Iolh

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,800 kg, table width: 800 mm, table length: 920 mm, overall weight: 14,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 33, Control system: HEIDENHAIN iTNC 530 with smarT.NC Tool interface: HSK-A63 Machining: 3-axis simultaneous Nodpfx Ago Aba Ths Ielh Special equipment: - 3D touch probe system - Tool measurement - Electronic handwheel - Roller-type roof guard FREE DELIVERY!

Condition: used, Year of construction: 2017, Working range X-axis: 550 mm Y-axis: 450 mm (tool change position 725 mm) Z-axis: 375 mm Workpiece carrier Double swivel carrier with counterbearing and crown gear, swivel time 0/180°: approx. 3.0 s A- and U-axis for fixture plate: max. ø475 × 830 mm Drive system: torque motor Load capacity: 2 × 360 kg Speed range A- and U-axis: 1–50 rpm C- and W-axis (optional): 2 or 4 satellites Work spindle Tool interface: HSK-A63 Speed range: 1–10,000 rpm (optional 1–17,500 rpm) Run-up time to max. speed: < 0.4 s (< 1.0 s with optional spindle) Spindle bearings: ø80 mm Power: 32 kW (40% duty cycle) Torque: 72 Nm (40% duty cycle) Feed drive Drive system: ball screw Rapid traverse X/Y/Z: 75 m/min Axis acceleration X/Y/Z: 10 / 10 / 15 m/s² Max. feed thrust X/Y/Z: 8,000 N Accuracy Position measuring system: direct, absolute Positioning tolerance X/Y/Z: Tp = 0.008 mm Tool magazine Tool change system: pick-up Capacity: 40 pockets (optional 64 or 80) Max. tool diameter: 70 mm / 160 mm (with free adjacent pockets) Max. tool length: 275 mm Max. tool weight: 7.5 kg Chip-to-chip time: approx. 2.5 s Weight and dimensions Total weight: approx. 9,500 kg Nodpfx Ajz R Szrog Ielh Transport dimensions (W × H × L): 2.75 × 2.85 × 3.65 m Machine installed (W × H × L): 3.85 × 3.70 × 6.30 m Connected load Operating voltage: 3 × 400 V, 50 Hz, TN-S/TN-C Total connected load: approx. 64 kVA Mean air consumption: 0.5 Nm³/min (6 bar) CNC control Siemens SINUMERIK 840D

Condition: used, Year of construction: 2010, Mazak VTC820/30 3-Axis Machining Centre. S/No. 200131 (2010) with Mazatrol Matrix Control, X/Y/Z Travels 3000/800/720mm, Table 3500mm x 820mm, Spindle Speed 18,000rpm, Spindle Taper BT40, B Axis Swivel Head +/- 110, Removable Centre Partition. Country of Origin: United Kingdom Nledpfxs Afnlas Ag Ish Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: These lots are located in Birmingham & Wolverhampton, UK. Please see individual lot for loading information and charges. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) 4.5 kW HSD Air cooling spindle 4 sets Yako Stepper motors and drivers T-Slot PVC table 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Manual Lubrication system Japan OMRON limit switch Solid steel frame construction Nlsdpfjz Hc T Usx Ag Ijh Power supply 3-phase, 380 V, 50 Hz Power 6 kW Dimension: 3600 × 2150 × 1580 mm Weight 1300 Kg

Condition: defective spare-parts repository (used), Year of construction: 2002, Robot - Handling - Parts Donor Manufacturer: KUKA Type: KR 200/3 Year of manufacture: 2002 Njdpfx Agezz S I Te Ijlh Technical data: - Load capacity: 200 kg The robot has not been tested and is being sold as a source of spare parts. Transport dimensions: approx. L 1.4 m x W 1.2 m x H 1.8 m / Weight: approx. 1,200 kg Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: new, Year of construction: 2025, VKM supplies spare parts for VKM, the complete Oswald product range, as well as selected Bezner-Oswald and Wema Probst machines, plus BÖGLI bandsaws and replacement knives manufactured to drawing specifications for a wide range of woodworking machinery. Some parts are available directly from stock. Below are some particularly frequently requested parts: Centering rollers bore 40mm €112.00/each Centering rollers bore 50mm €156.00/each Feed roller bore 40mm €118.00/each Feed roller bore 50mm €138.00/each Exit roller bore 40mm €102.00/each Nsdpfx Agowagxmj Ielh Feed roller bore 50mm €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to prepare a quotation including commercial terms; further spare parts available on request.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Effective cutting length: 4000 mm Nleds Addvxspfx Ag Ieh Blade diameter: 500 mm Electronic tilting of the inner/outer saw heads Tilting range: 22.5° to 135°

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Heavy-duty roller conveyor with individually adjustable rollers. 8 units on a steel frame. Roller length: 550 mm. 2 x 8 m, or 1 x 8 m. Roller diameter: 165 mm. Robust bearing design. Suitable as an infeed roller conveyor for planers, double edgers, resaws, etc. Nlsdpfxeyq Nnds Ag Ioh

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Heavy-duty roller conveyor with individually adjustable rollers. 8 units on a steel frame. Roller length: 550 mm. 2 x 8 m, or 1 x 8 m. Roller diameter: 165 mm. Robust bearing design. Suitable as an infeed roller conveyor for planers, double edgers, resaws, etc. Nledpeyq Nmtefx Ag Ioh

Condition: used, Year of construction: 2016, machine/vehicle number: M296, Used Filling Monoblock ALFATEK Elvira for beer 2000 bph General Characteristics of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph The Used Filling Monoblock ALFATEK Elvira for beer 2000 bph serves as a filling system specifically designed for bottling beer in glass containers, ideal for artisanal or semi-industrial production lines. Alfatek built the unit in 2016, and the Elvira 3/9/1 model handles a production speed of 2000 bottles per hour in the 33 cl format, while also supporting the 75 cl format. Therefore, it meets the needs of breweries with varying product volumes. Moreover, its configuration allows easy integration into existing lines. In particular, this monoblock suits breweries focused on maintaining product quality. Mechanical Configuration and Working Direction The machine operates with a clockwise rotation and includes certified safety guards, which ensure compliance with workplace safety regulations. Furthermore, the safety system prevents accidental operator contact with moving parts. Currently, the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph remains offline but fully functional. In addition, all technical manuals are available, and the system has undergone regular maintenance and revision. As a result, the machine retains its mechanical integrity. Thus, it stands ready for immediate use upon installation. Light Pressure Filling System At the core of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph lies the filler with 9 valves, configured for light pressure filling. Notably, this system is ideal for beer, as it preserves carbonation and minimizes agitation. Consequently, it prevents foaming and ensures a clean fill level. The system ensures precision, consistency, and compatibility with 33 cl and 75 cl glass bottles. Additionally, operators can clean and maintain the valves with ease. In other words, this machine simplifies process control. Therefore, it supports stable and hygienic production. Single-Head Capper for Two Cap Sizes The capping unit, integrated into the monoblock, features a single head for crown caps, compatible with 26 mm and 29 mm diameters. The capper, manufactured by AROL, offers high reliability and synchronizes perfectly with the filling phase. Moreover, its construction ensures durability even under regular use. As such, it guarantees a secure seal for each container. Besides that, the capper minimizes the risk of misalignment. For this reason, many small breweries prefer this model for its simplicity and efficiency. Nledpfxj Adt Taj Ag Ish Product Application and Container Type Manufacturers designed the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph specifically for beer bottling in glass containers. The machine does not support plastic or can formats. Because of this, it best suits craft breweries seeking high-quality packaging solutions. The light pressure filling system preserves the beer’s organoleptic properties and maintains its effervescence. In contrast, gravity filling would compromise carbonation. Therefore, this setup remains optimal for delicate products. Furthermore, the glass packaging ensures longer shelf life and consumer appeal. Operational Condition and Spare Parts The monoblock remains in good working condition and is available for functional testing. Even though it is no longer in production, it maintains its full operability. A full set of origi...

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Features: Nljde Ad Rnujpfx Ag Ioh - Dust collector - Briquetting press Technical Specifications: Vacumobil JP 300: - Nominal airflow: 5,100 m³/h - Max. airflow: 6,000 m³/h - Pressure differential at nominal airflow: 2,700 Pa - Pressure differential at max. airflow: 2,200 Pa - Filter area: 28.0 m² - Suction inlet: 300 mm - Inlet height: 1,215 mm (centered) - Fan motor: 7.5 kW - Customer-supplied fuse: 32 A - Compressed air connection: 1" - Operating pressure: 4.5 bar - Compressed air consumption: approx. 120 NL per pressure pulse at a pulse duration of 150 ms - Sound pressure level: 75.0 dB - Weight: 900 kg CS3-12 briquetting press: Maximum throughput: 50 kg/h or 0.75 m³/h (depending on material) - Hydraulic pump motor: 3.0 kW - Agitator motor: 0.37 kW - Feeding screw motor: 0.75 kW - Customer-supplied fuse: 16 A - Briquette diameter: 65 mm - Weight: 780 kg - Feed hopper: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Footprint: 4,500 x 3,000 x 2,900 mm Available starting in June/July 2027

Condition: excellent (used), Year of construction: 2013, Vertical machining center, Haas VM-3, year 2013. Njdj Adptcjpfx Ag Ielh

Condition: used, Year of construction: 2015, operating hours: 4,500 h, Equipment: all wheel drive, * Enclosed cabin * Amberg in-cabin air filter system * 600 TL (presumably a monetary value or specification) Nljdpfx Agj Afta Ao Ioh * Air conditioning * Dozer blade * 47 kW engine power * Hydraulic control circuits on the boom ----Last service on March 24, 2026, at 4421 operating hours----Vehicle number 12643----Errors and prior sale excepted