Used Leifeld+Lemke Kbv 100 for sale (24,255)

Year of construction: 1986, condition: ready for operation (used), Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout. Credpfxohp N Ucs Ailsh

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Codpfxez D S Sbo Ailsrh Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: ready for operation (used), Year of construction: 1988, A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, filling process preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. Furthermore, the system includes the complete pallet conveyor, keg conveyor and a Kuka robot for depalletizing and palletizing of the kegs. Documentation available. On-site inspection is possible. Credpoycigkjfx Ailsh

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Cjdpjzucxcofx Ailsrh Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition Crjdeyz Dhzepfx Ailsh - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with Cjdpfx Aiezizlqslerh MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: good (used), • Model – FMF 100 • Double-sided drilling machine • Min. diameter: 3 mm • Max. diameter: 300 mm Cjdpfxsuqma Ao Ailjrh • Speed: 110 – 4600 rpm • Lower drill with automatic feed, upper drill guided manually

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 Crodpfovcfhmsx Ailjh - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compact Fanuc ArcMate 100/7L robot cell with R30iB controller, Lorch S3 pulse welding machine, new. Number of axes: 6 Max. payload: 7 kg Max. working range: approx. 1633 mm Year of manufacture: 2016 Table surface: 750x500 mm each Overall dimensions: approx. 2500x1500x2200 mm Total weight: approx. 2000 kg Used – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected upon request. Free loading / ex works. Crsdpsz I Ryrsfx Ailsh The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Forwarding costs upon request – please specify the delivery address.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2882-0275, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller manufacturer: Deckel Maho, controller model: Dialog 112, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, workpiece weight (max.): 1,250 kg, total height: 2,900 mm, total length: 3,900 mm, total width: 4,100 mm, table width: 800 mm, table length: 1,250 mm, table load: 1,250 kg, rotational speed (max.): 8,000 rpm, overall weight: 9,100 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 10,000 W, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, For sale is a vertical CNC machining center, Deckel Maho DMC 100 V, manufactured in 1998. The machine is in good condition and fully functional. Technical specifications: Manufacturer: Deckel Maho GmbH Type: DMC 100 V Year of manufacture: 1998 Serial number: 2882-0275 Travel in X-axis: 1,000 mm Travel in Y-axis: 800 mm Travel in Z-axis: 700 mm Table size: approx. 1,250 x 800 mm Table load: approx. 1,250 kg Spindle speed: up to 8,000 rpm Tool holder: SK 40 Credpfxoz I R Euj Aileh Tool magazine: 30 positions Operating voltage: 400 V / 3-phase Rated current: 70 A Weight: approx. 9,100 kg If you are interested or have any further questions, please do not hesitate to contact us. Location: 30827 Garbsen.

Condition: excellent (used), Electrically controlled infeed magazine for planing machines For sale is an electrically controlled infeed magazine for continuous and uninterrupted feeding of planing machines. Technical features: * Automatic adjustment of the feed rate to the planing machine * Feed rate of up to 60 m/min * Adjustable feed force, adapted to the respective workpiece size Codpfx Aioz Dpvdslsrh * Continuous and uniform feeding * Front section can be folded down for better accessibility and convenient operation * Robust design for professional use The infeed magazine is ideal for continuous operation and efficient material feeding to planing machines.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side Csdez Hcz Sepfx Ailjrh - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Year of construction: 2016, condition: used, functionality: fully functional, Two Dybvad plate freezers are available for sale from our location in 45891 Gelsenkirchen. These plate freezers are used and come from a business liquidation. Currently, the plate freezers are still connected to the power supply and can be inspected after scheduling an appointment. For technical specifications, please contact the manufacturer. Disassembly and loading are the responsibility of the buyer. Crodsz I Abnspfx Ailoh

Condition: good (used), Technical specifications for the pallet rack upright: Racking system: Bito Type: PRO Included in delivery: 01x pallet rack upright, used Cedpfx Aijx Hz Dwelorh Material finish: Sendzimir galvanized Frame profile: P5 Profile dimensions: P 100 x 76 x 2.25 mm Including horizontal and diagonal braces, base plates, and upright protectors The uprights are pre-assembled (bolted lattice construction) Height: 12,400 mm Depth: 1,100 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be quoted separately depending on delivery location and scope.

Condition: excellent (used), For sale is an industrial gas burner, Weishaupt WM-G10/3-A monarch®, in ZM design, complete with DUNGS gas fittings and accessories as shown in the pictures. With a thermal output of 100–1000 kW, this burner is suitable for installations requiring high performance, such as industrial boiler rooms, heating and process boilers, after selecting the burner according to the equipment's parameters. A key advantage of this offer is the extensive range of included equipment: in addition to the burner, you also receive a double gas valve DUNGS DN65, a pressure regulator, flange components, and a Weishaupt control panel. The entire set is sold in the configuration shown in the photographs. Burner data from the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Design: ZM Year of manufacture: 2010 Serial number: 5970155 Type of gas indicated on the nameplate: N Thermal output range: 100–1000 kW Gas connection pressure range: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Country of manufacture: Germany CE marking: CE-0085BQ0027 Fittings and equipment shown in the pictures: Double gas valve DUNGS DMV 5065/12 Nominal valve diameter: DN65 Maximum valve pressure: 500 mbar Valve catalog number: 245099 Valve marking: class A, group 2, EN161 Gas pressure regulator Presostat DUNGS GW 50 A2 Weishaupt / Berger Lahr STE 50 actuator, 24 V DC power supply Weishaupt control panel with display Manometer Codpfx Aoz I Enqjilsrh Tubular elements, flanges, connectors, and wiring shown in the pictures Condition and scope of sale: The unit has visible signs of use, dirt, and localized corrosion on the steel components. The pictures show the actual item offered and serve as the basis for determining the scope of delivery. This offer includes the burner together with the shown accessories. Selection for a specific boiler, installation, and adjustment should be entrusted to a gas burner service company.

Condition: excellent (used), functionality: fully functional, clear span: 2,700 mm, total height: 10,050 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 10,000 kg, number of shelf rows: 5, overall weight: 14,500 kg, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty racking solution for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load capacity of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The pallet racking system on offer has a total of 648 pallet spaces, including spaces on the floor level. At a total price of €14,240.00 net, this corresponds to a price of only €21.97 net per pallet space. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Level load: 2,000 kg per level - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: Floor + 5 beam levels - Pallet spaces: 648 including floor spaces - Price per pallet space: €21.97 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 270 × Beams, approx. 360 × 12 × 5 cm - 540 × Locking pins PRICE: €14,240.00 net €16,945.60 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner logistics company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams optionally available Crodez Ip Hwjpfx Ailoh - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, a renovation, or an extension – we will provide you with expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, storage racking systems, and other solutions. Many systems are set up and can be experienced directly. Our specialist consultants will be happy to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company website. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: excellent (used), For sale: an industrial gas burner, Weishaupt WM-G10/3-A monarch®, ZM version, from 2011, complete with DUNGS gas valves and accessories as shown in the photos. The burner’s thermal power range is 100–1000 kW, and its German manufacture and extensive valve set are the key advantages of this offer. This burner is suitable for industrial boiler rooms, as well as heating and process installations – after being adapted to the boiler and gas installation parameters. The offer includes not only the burner but also a double gas valve, a pressure regulator, a gas filter, pressure switches, and connecting elements. The exact scope of the sale is visible in the photographs. Burner technical data – according to the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Crsdpfx Aisz I Ep Iolsh Model: WM-G10/3-A Version: ZM Year of manufacture: 2011 Factory number: 40018116 Gas type – designation on the nameplate: N Thermal power: 100–1000 kW Gas connection pressure: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Designation: CE-0085BQ0027 Country of manufacture: Germany Gas valves and accessories: DUNGS DMV 525/12 double gas valve Maximum pressure: 500 mbar Class: A, group 2 Standard indicated on the nameplate: EN 161 DUNGS catalog number: 255248 DUNGS FRS 520 gas pressure regulator Maximum inlet pressure: 500 mbar Output pressure range indicated on the label: 5–20 mbar DUNGS catalog number: 223382 Weishaupt article number: 640679 Weishaupt 520/1 gas filter Connection: 2″ Maximum working pressure: 0.5 bar Designation: CE-0085AS0538 Other equipment visible in the photos: DUNGS GW 50 A5/1 gas pressure switches Pressure switch mounted on the burner Pressure gauge Control actuator Burner head assembly with electrodes and cables Pipe elements, elbows, flanges, and fittings Wiring and connecting plugs Condition and scope of delivery: Used burner, with visible signs of use and storage. The elements have some dirt and localized corrosion marks. The photos show the actual item being offered.

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 100 t, stroke length: 320 mm, operating speed: 35 mm/s, reverse speed: 380 mm/s, table width: 560 mm, table length: 710 mm, table height: 850 mm, throat depth: 320 mm, distance table to ram: 460 mm, oil tank capacity: 365 l, total length: 1,200 mm, total width: 3,200 mm, total height: 2,800 mm, overall weight: 8,500 kg, Oilhydraulic gap press, YOP 1990, control SIEMENS, capacity 100 to, return power 10 to, motor 15 KW, throat depth 320 mm, stroke 320 mm, table size 710 x 560 mm, table bore Ø 110 mm, table high 850 mm, rapid feed, hydr. ejector 20 to, hydr. die cushion 10 to, Hydro strip feed device Keller typ HVP-SIG 2 with control, decoil hauling winch SOPREM, weight ca. 8500 kg Crjdoz Itdtjpfx Ailsh

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The offered pallet racking system has a total of 432 pallet spaces, including ground-level spaces. At a total price of €9,870.00 net, this corresponds to a price of only €22.85 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Shelf load: 2,000 kg per level - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground level + 3 beam levels - Pallet spaces: 432, including ground-level spaces - Price per pallet space: €22.85 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 520 × 110 cm, pre-assembled - 162 × Beams, approx. 360 × 12 × 5 cm - 324 × Safety pins PRICE: €9,870.00 net €11,745.30 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Crsdpfsz Ip Emjx Ailjh Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, shelving systems, and other solutions on-site. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many more offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: good (used), Extremely practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Maximum load: 100 kg horizontally. Maximum load: 50 kg vertically. Rotation speed: 0.5-9 rpm. Rotation direction: left and right. Rotary table speed: manually adjustable. Rotary table diameter: 345 mm. Rotary table height: 415 mm. Rotary table tilt angle: 0-90°. Codpfx Ajcctnaoilorh Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power supply: AC 110V / 220V 50/60Hz. Optional with jaws, additional cost: 160. Delivery to your doorstep: 80.

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition Crodpfeyc H I Sex Ailsh • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, Year of construction: 2015, functionality: fully functional, NAKAMURA NTJ-100, CNC turning and milling center with FANUC 31i-B control • C-axis on the left spindle • C-axis on the right spindle • Milling drive on the upper turret • Milling drive on the lower turret • B-axis on the upper turret +/-91° • Y-axis +/- 40 mm on the upper turret • Y-axis +/- 32.5 mm on the lower turret • Bar capacity left 42mm A2-5, 6000 rpm • Bar capacity right 42 mm A2-5, 6000 rpm • 12/24 + 6 stations under 45° turret, top • 12/24 stations turret, bottom • 90° inclined bed • Interface for bar loader magazine, Hommel • Air blow-out, right spindle • Drive power left, FANUC AC11/7.5kW • Drive power right, FANUC AC 11/7.5KW • Chuck pressure monitoring, right and left • 19" touch monitor • Door lock • Clamping force control • Helical interpolation • NT-Nurse 2 • NT-Work navigator • Feed rate and rapid traverse adjustment switch • Transformer • CE marking • Memory capacity 2560 meters • Tool offset memory 99 items • Program management 2000 programs • Extended editor function • Background editor • Macro B • Direct input of drawing dimensions • G52-G59 • Polar coordinate interpolation • Cylindrical interpolation • Current documentation • Machine color RAL 9002, light gray • Door color RAL 7011, iron gray • Chip conveyor RAL 7024, graphite gray Machine options NTJ-100 Air and coolant blow-out through the right spindle Ø 65mm NTJ-100 Chuck blow-out, left spindle NTJ-100 Intelligent handwheel NTJ-100 Polygon turning function Manual tool probe, removable for left and right Workpiece unloading NTJ-100 Unloading with gripper hand on the upper turret for parts up to Ø 65 mm x length 150 mm / 3.0 kg NTJ-100 Material collection tray type A with enclosed collection box, left, for material remnants and finished part ejection, part size up to spindle bore 65 mm NTJ-100 enlarged main spindle, left, Ø 65 mm, spindle nose A6 NTJ-100 enlarged counter spindle, right, Ø 65 mm, spindle nose A6 Crodpfx Ajz Iy Uroiljh Chip disposal Hinged belt chip conveyor for NTJ-100, discharge right. Manufacturer: AME. Color: RAL 7024. Motor right, in the direction of travel.

Condition: excellent (used), For sale is a Karl Süss HR 100 Analyse – a high-end, manual measurement and testing station designed for the analysis and contacting of semiconductor wafers and microelectronic components. The device is used in laboratories, research and development departments, and during scientific research. Crjdjzl H Ayopfx Aileh The station is equipped with a precise measurement table with fine adjustment, a sample holder with a vacuum function, and a mechanical lifting mechanism. It also has connections for compressed air and vacuum, which ensures stable mounting of the components being tested during measurements. Technical data: Manufacturer: Karl Süss Model: HR 100 Analyse Device type: manual testing station (Wafer Probe Station) Application: analysis and testing of semiconductor wafers and microelectronic components Vacuum function for sample mounting Precise measurement table Connections for compressed air and vacuum Condition: used, as shown in the pictures.

Condition: used, Year of construction: 2017, MURATEC MT100, 2017, CNC machining center with gantry loader 2 turrets 2 spindles Crodpjz Ix Taofx Ailsh 2 Y-axes

Condition: as good as new (ex-display), Very practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Max. load: 100 kg horizontally. Max. load: 50 kg vertically. Rotation speed: 1 to approx. 7 RPM. Rotation direction: left and right. Table speed: manually adjustable. Table diameter: 345 mm. Table height: 415 mm. Table tilt angle: 0-90°. Motor power during operation: 0.12 kW. Crodj Ugnbepfx Ailsh Dimensions: 500 x 470 x 415 mm. Power: AC 110V / 220V 50/60Hz. Optional: with chuck/quick-release chuck, surcharge of 180 €. Delivery to your door: 90 €.