Used Lefa Zpm 60 Liter for sale (26,795)

Condition: good (used), Year of construction: 1996, Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with attachments -Tank capacity: approx. 60 liters Bdsdpfxjpix Nco Amrjh -Individual components: see photos -Dimensions: 730/670/H620 mm -Weight: 74 kg

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Bdsdpfxswc Afhj Amroh Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, fully refurbished, 12-month warranty, available for immediate delivery - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Supply and exhaust air with electrically actuated dampers (driven by Belimo actuators) Bjdpfjtbq Eqsx Amredh - Supply air fan with frequency converter, controlled via regulator - Stainless steel exhaust hood - Bentrup 507 control system with thyristor control - Note: Controller language is German only; switching to other languages is not possible! - Additional drag element Type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current rating: 26 amperes - Supply voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace, laboratory furnace, hardening furnace, ceramic furnace

Condition: excellent (used), MEMMERT ICP 600 Precision Incubator / Refrigerated Incubator Manufacturer: MEMMERT GmbH + Co. KG Type: ICP 600 Machine Type: Precision Incubator / Refrigerated Incubator Internal Volume: 256 Liters For sale is a used MEMMERT ICP 600 precision incubator with a powerful refrigeration unit and motorized air circulation in the interior. The unit is suitable for temperature-controlled applications in laboratories, research, quality assurance, and industry, as well as for incubation, storage, and testing tasks. Technical Data: Model: ICP 600 Internal Volume: 256 Liters Setting Temperature Range: 0 °C to 60 °C Operating Temperature Range: 0 °C to 60 °C Setting Accuracy: 0.1 °C Nominal Temperature: 60 °C Power Supply: 230 V / 50 Hz Current Consumption: 3.1 A Power: 700 W Protection Class: IP20 Max. Number of Sliding Shelves: 7 Max. Load per Sliding Shelf: 30 kg Max. Load per Unit: 80 kg Dimensions: External Dimensions (W × D × H): approx. 958 × 656 × 1,335 mm Internal Dimensions (W × D × H): approx. 800 × 500 × 640 mm Internal Volume: 256 Liters Equipment: Electronic PID process controller Alphanumeric text display Internal data logger Program sequence control for up to 40 ramp segments Adjustable motorized air circulation Integrated weekly timer Recessed pressure/rotary encoder Optical alarm indicator Refrigeration unit with automatic hot gas defrost Stainless steel interior RS232 interface Sliding shelves as shown in the pictures Mobile base Shipping Data: Unit (W × D × H): approx. 958 × 656 × 1,335 mm Weight: approx. 144 kg Condition: Used Optical condition as shown in the pictures. Nameplate present. Scope of Delivery: Bjdpfxoz Eh Syj Amrjdh MEMMERT ICP 600 Precision Incubator Sliding shelves as shown in the pictures Mobile base Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), MEMMERT ICP 800 Precision Incubator / Refrigerated Incubator Manufacturer: MEMMERT GmbH + Co. KG Type: ICP 800 Machine Type: Precision Incubator / Refrigerated Incubator Internal volume: 749 liters For sale is a used MEMMERT ICP 800 precision incubator with a refrigeration unit and motorized air circulation in the interior. The device is suitable for temperature-controlled applications in laboratories, research, quality assurance, and industry, as well as for incubation, storage, and testing tasks. Technical data: Model: ICP 800 Internal volume: 749 liters Setting temperature range: -12 °C to +60 °C Operating temperature range: -12 °C to +60 °C Setting accuracy: 0.1 °C Nominal temperature: 60 °C Supply: 230 V / 50 Hz Current consumption: 5.3 A Power: 1200 W Protection class: IP20 Max. number of sliding shelves: 14 / 12 Max. load per sliding shelf: 30 kg Max. load per device: 160 kg Dimensions: External dimensions (W × D × H): approx. 1198 × 756 × 1895 mm Internal dimensions (W × D × H): approx. 1040 × 600 × 1200 mm Internal volume: 749 liters Equipment: CFC-free refrigeration unit Automatic hot gas defrosting system Motorized air circulation Electronic PID process controller Alphanumeric text display Internal data logger Program sequence control for up to 40 ramp segments Adjustable air turbine Integrated weekly timer Retractable pressure/rotary encoder Optical alarm indicator Stainless steel interior Sliding shelves as shown in the pictures Mobile base Transport data: Device (W × D × H): approx. 1198 × 756 × 1895 mm Weight: approx. 227 kg Condition: Used Optical condition as shown in the pictures. Bdodpfx Asz Eig Eomrjh Nameplate present. Scope of supply: MEMMERT ICP 800 Precision Incubator Sliding shelves as shown in the pictures Mobile base Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: like new (used), Cream cooker for 60 liters of pudding or other quantities. Made entirely of stainless steel, on wheels, with a stirring mechanism. Bsdpfx Amew R T S Tsrsdh The cream cooker has been fitted with a drive motor for the stirring mechanism. 16 Ah connection.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Bdjdsz Hq Akopfx Amrsh Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Condition: used, Description: CTS climate test chamber CW-60/6 -60°C to +120°C 6,000 liters (6 m³) Bjdjygr E Repfx Amredh Temperature range: -60 °C to +120 °C Temperature deviation: ±0.5 to 1 K over time Heating: 1 K/min from -40 °C to +80 °C Cooling: 1 K/min from +80 °C to -40 °C Temperature range: +10 °C to +95 °C Humidity range: 10% to 85% relative humidity In dew point range: +5°C to +89°C Temperature deviation: ±0.5 K over time Humidity deviation: ±1 to ±3% r.h. over time Dimensions: Internal dimensions: Volume: approx. 6,000 liters (6 m³) Approx. internal dimensions: Height: 2,000 mm, Width: 2,000 mm, Depth: 1,500 mm

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components Bdsdpfx Amszima Hsroh 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone.

Year of construction: 2024, condition: new, functionality: fully functional, New machine with a 24-month warranty Stainless steel model Advantages: + Mobile unit with locking castors + Completely made of stainless steel + For the production and preparation of pastry dough, baking cream, chocolate, fondant, fruit jam, coatings, fillings, as well as for any product requiring uniform heating and mixing + Thermal oil circulates in the double-walled tank, which is designed for safe and easy use + Triple-walled construction for optimal thermal insulation + With side and bottom scrapers + Electronic thermostat for setting the cooking temperature + Manual / automatic operation possible + Digital temperature display with timer + The tank can be easily tilted via a handwheel for emptying (optional: with a drain valve) + Two working speeds + Safety switch in case of overheating SPECIAL accessories, optionally available at an extra charge: - Drain valve for quick and easy emptying: + €880.00 net - Machine with frequency inverter, for stepless stirring speed: + €1,115.00 net - Double mixing tool, for particularly homogeneous mixing of products + €815.00 net - Higher temperature (instead of 150°C, up to 180°C possible) + €990.00 net Technical data: - Capacity: 60 liters - Max. temperature: 150°C (optional up to 180°C) Bdjdsivdubjpfx Amreh - Thermal oil volume: 17.5 liters - Heating power: 6 kW - Stirring speed: 46 rpm & 92 rpm (1st / 2nd gear) - Motor power: 0.6 kW / 0.8 kW (1st / 2nd gear) - Connection values: 400 V - 3Ph - 50Hz - 32A-CEE plug - Dimensions: 960 x 780 x 1635 mm (WxDxH) - Filling height: 1200 mm - Net weight: 150 kg

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Bedpjzimgaofx Amrsdh Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Bsdjzii A Ropfx Amrjdh Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: new, PRICE: 1800 EUR Bdjdpeikvrdjfx Amroh The machine is characterized by simple operation, easy cleaning, and maintenance as well as stability during operation It is suitable for factories dealing with meat processing, restaurants, kitchens, and other catering facilities Dimensions: 850× 450× 850mm Electrical power: 0.12kW Volume: 60 liter Delivery time: immediately after the advance payment (100%)

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / accumulator / filter ... -Type: 03 HDJ -Engine power: 22 kW/1460 rpm Bsdogz Irvepfx Amrodh -Tank capacity: approx. 240 liters -Pressure gauge: up to 250 bar -Individual components: pressure accumulator/hydraulic tank/filter/valves (see pictures) -Number: 2 units available -Price: per piece -Dimensions: 1060/820/H1530 mm -Weight: 738 kg

Condition: used, Very little used Quickstep Anticorro stainless steel reactor. Vessel: - Manufacturer: Quickstep Anticorro - Total/working volume: approx 2897 / 1900 liters - Designed material: Stainless steel AISI 304 - Design type: Clamped dished and hinged top and welded dished bottom - Dimensions: approx 1706 mm diameter x 2471 mm height (3580 mm height with lid open) - Maximum pressure and temperature of the vessel: -1/1 bar at 0 to 100°C - Maximum pressure and temperature of jacket: -1/2,5 bar at 0 to 135°C - Mounted on stainless steel legs. Agitator: - Bottom entry frame agitator MIX Brno model 60 MP 30 - The agitator is designed for mixing creams, gels and ointments with a maximum weight of 1100 kg/m3, maximum viscosity 10000 cP at a temperature up to 100°C and maximum particle size 10 - 80 μm. - Drive through NORD gear drive 7.5 kW, 1460 rpm, 50 Hz - final rpms of the agitator at 50 Hz is 42 rpm. Specifications: Capacity: 1,900 L Type of Stainless: 304 Stainless Steel Internal Pressure: 1 bar Internal Temperature: 100°C Jacket Pressure: 2.5 bar Bdodpfx Amezunpterjh Jacket Temperature: 135°C Legs/Lugs/Mounting Ring: Legs

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total width: 690 mm, total length: 940 mm, total height: 1,470 mm, empty load weight: 300 kg, power: 3 kW (4.08 HP), height adjustment type: mechanical, New machine with a 24-month warranty. Advantages: + Excellent price-performance ratio + Powerful planetary mixing machine with digital control + 10 speeds with constant power transmission + Equipped with an ingredient hopper and a safety guard made of stainless steel + The machine switches off immediately when the guard is lifted + With integrated dust/splash protection cover + The machine stands on 4 vibration-absorbing adjustable feet + No floor anchoring required + Bowl lift with lever + Bowl support arms made of stainless steel + Closed planetary gearbox made of stainless steel + Can also be used with a 30-liter attachment (optional) + Fast spare parts supply within 1-2 working days Bjdehydl Iepfx Amrodh STANDARD accessories, included in the price: - 1x 60-liter stainless steel bowl - 1x mixing beater for 60-liter bowl - 1x flat beater for 60-liter bowl - 1x dough hook for 60-liter bowl OPTIONAL accessories, available at an extra cost, prices on request: - Additional 60-liter stainless steel bowls - Additional tools (mixing beater, flat beater, dough hook) - Bowl trolley for 60-liter bowls - 30-liter attachment (1x 30-liter stainless steel bowl + 3 tools for 30-liter bowl) Technical data: - Motor power: 3.0 kW - RPM at 50 Hz: 165 - 450 (level 1 - 10) - Connection values: 400V - 3-phase - 50Hz - 16A-CEE plug - Dimensions: 690 x 940 x 1470 mm (W x D x H) - Max. 1710 mm height when the hood is open - Net weight: 300 kg

Condition: used, Year of construction: 2010, Labotek dryair dryer DDM 5/60 60 Liter + Loader year 2010 price: 4.450 € Bdedpfjz Hc Hzex Amroh Contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, COMPLETE PELLET PRODUCTION LINE 6 t/h Bodpfx Aeqy Hcdemrjdh Hydraulic walking floors - double for hard and soft wood Conveyor belt 12m with magnetic separator for chips Two hammer mills each 130 kW for wet material Two beams with hydraulic floor befor drum dryer Dryer for drums of 12 m FIEDLER boiler 3.5 MW Refiner 250kW with transport fan and filter Silos bin ZEPI for dry material Z conveyor ZEPI above three silo bins for pellet mill 0qe0k TRI Pellet Mill ZEPI ZPM600 with 200kW (2pcs) and 160Kw Pellet mill production year 2015 (two pcs) Conveyor belt 10m for hot ball, conditioner and aspirin system vibro sieve ESSEGI packaging system (ITA) 2019 Pallet system ROBOTIK KOGLER (SLO) 2015 Grecon spark detection system Electrical cabinet room for complete equipment Line in operation, capacity 6-7 t/h

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total width: 720 mm, total length: 1,050 mm, total height: 1,660 mm, empty load weight: 450 kg, power: 4.4 kW (5.98 HP), height adjustment type: electric, New machine with a 24-month warranty Advantages: + Excellent price-performance ratio + Powerful planetary mixer with digital control + 10 speeds with constant power transmission + With ingredient hopper and safety grid made of stainless steel + The machine switches off immediately when the grid is raised + With integrated dust/splash protection cover + Machine stands on 4 vibration-absorbing adjustable feet + No floor anchoring required + Hydraulic pot lift with two safety switches + Pot support arms made of stainless steel + Closed planetary gearbox made of stainless steel + Can also be used with a 60-liter attachment as an option + Fast supply of spare parts within 1-2 working days STANDARD accessories, included in the price: - 1x 80-liter stainless steel pot - 1x mixing beater for 80-liter pot - 1x flat stirrer for 80-liter pot - 1x dough hook for 80-liter pot SPECIAL accessories, available as an option for an additional charge, prices on request: - Additional 80-liter stainless steel pots - Additional tools (mixing beater, flat stirrer, dough hook) - 60-liter attachment (1x 60-liter stainless steel pot + 3 tools for 60-liter pot) - Pot trolley for 80 or 60-liter pots Technical data: - Motor power: 4.5 kW - RPM at 50Hz: 133 - 400 (level 1 - 10) - Protection: 16A-CEE plug - Connection values: 400V - 3Ph - 50Hz - Dimensions: 720 x 1050 x 1660 mm (W x D x H) - Max. 1910 mm height when the hood is opened - Net weight: 450 kg Bdsdehydmdopfx Amreh

Condition: good (used), functionality: fully functional, used sourdough machine Isern Häger 600 RMS, for 1000 liters, in bakery condition (good condition), machine no. 06910004, 2.3 kW, 400 V, 50 Hz, weight 420 kg Bdodpjwwwdhsfx Amrjh

Condition: good (used), Year of construction: 2004, machine/vehicle number: 0-201-24-7426, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 410 mm, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag PC85, actuation type: electric, total length: 6,500 mm, total width: 2,500 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, CNC Homag machine primarily for stair construction. Working area: 6000 x 1200 x 410 mm. 5-axis machine. Tool changer with 18 tools. Number of clamping consoles: 10 pieces. Two vacuum pumps. Bodpfx Amoz H Rp Dsrjdh

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, rotational speed (max.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 100 h, coolant supply: 70 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 4-position pallet changer and 180 magazine slots Year of manufacture: 2007 Control system: Sinumerik 840D Technical data: Spindle speed: 0-18,000 rpm Drive power: 35 kW Torque: Spindle connection: HSK 63 Number of magazine slots: 180 Number of pallets: 2 Pallet size: 500x500 mm Travel distances: X-axis: 630 mm Y-axis: 800 mm Z-axis: 650 mm Bjdpfex Dlgnex Amredh C-axis: 0.001° All axes have linear drives Accessories: -Coolant system -Chip conveyor The machine has been regularly maintained. It is still very accurate! More pictures will follow. Video available upon request.

Condition: used, Year of construction: 2015, operating hours: 9,409 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,000 kg, operating hours of spindle: 2,589 h, Equipment: chip conveyor, documentation/manual, Hurco VMX60i | large 3-axis CNC machining center | ready for demonstration We are selling our 3-axis machining center, the Hurco VMX60i. The machine was used for milling operations on steel, stainless steel, aluminum, brass, copper, and plastics. It is currently powered and can be inspected on-site by appointment. The VMX60i is equipped with a spacious worktable. According to our documentation, the maximum permissible table load is 1,360 kg. We will provide interested parties with further technical data, equipment details, and operating hours based on the machine documentation. Tools, clamping devices, ZeroCLAMP zero-point clamping systems, and a programming workstation with CAD/CAM are also available. The scope and prices for these items will be agreed upon separately and are not included in the quoted machine price. Price for the machine: €49,000 (negotiable), net, ex works Leopoldshöhe. Inspection and functional demonstration by appointment. Disassembly, loading, and transport are the responsibility of the buyer. If you are interested, please send your contact information and telephone number. Bodpfez D U S Rsx Amrsdh

Year of construction: 2016, operating hours: 14,242 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chanber Bdedpot Txqrjfx Amrsh Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 14 242 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 SD Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400 Maximum bale weight: 340-500 kg Bjdpfoz H Nu Eox Amrsdh Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of the filling opening: 115 cm wide x 80 cm deep x 55 cm high The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited headroom. Video available upon request!