Used Large Die Cutting Machine for sale (72,159)

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards Dodpfxjy Tu Rwo Aayeuw – safety pressure mats – operating tools – hard sheet metal

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Dusdoziytmspfx Aayow Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Duodpfev Nzpgox Aayew Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Dodpfoyly R Ejx Aayjuw Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene

Year of construction: 1999, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1999 -Dimensions: 600/600/H1300 mm -Weight: 50 kg Dsdpfob A N T Hjx Aayjuw

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 Dsdpfxec Uldrj Aayeuw -pneumatically operated -Piston stroke: 20 mm -Pressure power: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Year of construction: 1996, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Duedpfx Ajb A H U Ejaysw -pneumatically operated -Year of manufacture: 1996

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically Duedpob A Nc Hofx Aayew -Year of manufacture: 1995

Condition: excellent (used), Year of construction: 2002, operating hours: 20,000 h, functionality: fully functional, working width: 1,700 mm, type of input current: three-phase, total width: 4,500 mm, total length: 8,030 mm, total height: 2,150 mm, power of the servo motor: 20 W, overall weight: 34,000 kg, input voltage: 380 V, Semi-automatic die-cutting machine. Manual sheet feeding, Dedozidhbopfx Aaysuw die-cutting section, waste removal section, and palletizing.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 15,000 h, functionality: fully functional, working width: 1,430 mm, type of input current: three-phase, total width: 5,000 mm, total length: 5,500 mm, total height: 2,100 mm, overall weight: 4,000 kg, input voltage: 380 V, Automatic flatbed die-cutting machine with sheet feeder, suitable for cardboard and corrugated board. The machine is fully operational and ready for production. Dujdpszidbnefx Aaysw The machine offers absolute safety for the operator. Maximum sheet size: 1030 × 1440 mm.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Dusdpozgc Ubefx Aayow Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Year of construction: 2013, condition: good (used), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: Dedew E Iumepfx Aayjuw o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment • Die-Cutting Plate Size: 1,080 x 760 mm

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. Dujdpozfwxxofx Aayew It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B Dedpfxozg D I Nj Aaysuw - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools - 6 x tool carts

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) Duedpfx Aevpalaeayjw ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. Dedpeiklxbefx Aayjuw We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Condition: used, Punching machine for, e.g., slipcases with many punching dies Dusdjxw N Ntjpfx Aaysw

Condition: refurbished (used), and Fed Platen Erba model Titan 3 with automatic ZENARI feeder: size 80/120, Picard plate, Duodpfx Aszc Ek Ssayew counter, automatic lubrication, 3 operating modes (continuous, single, and timed), Automatic ZENARI feeder. All safety features. Completely rebuilt to like-new condition.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 858799A, Manufacturer: Ruiyang Printing Machinery Co., Ltd., China Model: MH-1650 Machine Category: Die Cutting & Creasing Machine Machine Type: Automatic Large Format Die Cutter Year of Manufacture: 2014 Serial Number: 858799A Technical Specifications: - Max. Sheet Size: 1650 x 1210 mm - Min. Sheet Size: 650 x 550 mm - Max. Die Cutting Size: 1620 x 1190 mm - Speed: up to 3,200 sheets/hour - Power Supply: 380 V, 50 Hz, 3 phases Features: Djdpfx Aajw Rb Ipoyeuw - Automatic feeder with suction head - Large format pile delivery - Heavy-duty design for carton and corrugated board - Control panel with management and safety functions - Suitable for large format packaging production

Year of construction: 2000, condition: good (used), Platen-type equipment designed for die cutting, creasing, and perforating cardboard and corrugated board. Duedpjyb Tc Hefx Aaysw Maximum sheet size: 720 × 520 mm. Output: up to 25–28 cycles per minute. Motor power: 2.2 kW. Weight: approx. 2000 kg No documentation available.

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Dusdpfx Aaox Ndu Dsyjw Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been very well maintained, regularly cleaned, and serviced. It is in like-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Sheet metal thickness max.: 15 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Automation level: Automatic Chuck type: Electric Duodpsy Tvzkofx Aayjw Input voltage: 380 V Input current type: Three-phase Laser operating hours: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT CE marking Documentation/Manual Safety light curtain Rotary table Extraction system

Condition: good (used), Year of construction: 2004, functionality: fully functional, Bobst SPO 160 Vision, ref. 3002 Year 2004 Maximum sheet size: 1600x1100mm Maximum speed: 4500 sheets per hour QUBE system Stripping unit Batch delivery In good working order. Dsdpfx Aaoy Tpfvoysuw

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers Duedoy Rumyspfx Aaysw - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening Dusdey Rummspfx Aaysw – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate