Used Laboratory Dissolver for sale (1,597)

Condition: used, functionality: unexamined, machine/vehicle number: LD 50, Used Pendraulik LD 50 laboratory dissolver Pedoxp Hw Espfx Adlerc Manufacturer: Pendraulik-Ruhrwerk Model: LD-50 Max 8,400 rpm

Condition: used, GRIESER Type: GFD 11 LST Product: Grieser Laboratory Stand Dissolver Intended Use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can range from thin to pasty. Machine Design: The laboratory stand dissolver consists essentially of the machine stand, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the collet chuck, and the control cabinet (non-Ex) with control and compact controller. Prsdjzdtflepfx Adloc In the working position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed control via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is carried out by switching on the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains in any desired position. Lowering the mixing tool drive To lower the arm, the corresponding buttons (two-hand safety circuit DOWN-DOWN) on the control panel are pressed. Mixing tool change The mixing tool shaft is provided with an M8 connection thread. Depending on the requirement, the mixing tool (stirring blade, customer-supplied) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of construction: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring blade, customer-supplied Control panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". Safety-relevant functions such as disconnection from the mains via the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber are excluded. The control panel consists of an illuminated LCD display and film-covered tactile buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be switched through using the up and down buttons. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), For Sale: Set of Three Dissolvers / Mixers (photos numbered accordingly) 1. UNIVERSAL DISSOLVER – PASQUALE MORENO GENOVA Technical Specifications: -Agitator drive: Electric -Column lifting: Hydraulic -Adapted for connection to a screw feeder for dosing powder -INOX stainless steel mixing tank (no drive) -Dispersing disk diameter: Ø 250 mm -Disk rotation speed: 1400–2800 RPM -Tank dimensions: Ø 110 cm × 100 cm (height) -Overall dimensions (L×W×H): 210 × 110 × 170 cm -Power supply: 380/400 V 2. DISSOLVER 3HP with Inverter Technical Specifications: -Electric column lifting -Inverter for smooth speed adjustment -Agitator motor power: 3 HP (2.2 kW) -Dispersing disk diameter: 200 mm -Shaft length with disk: 600 mm -Maximum lifting height: 1000 mm -Total height: 2200 mm -Power supply: 380/400 V 3. LABORATORY MIXER FERRI F30 – 1HP Technical Specifications: -Smooth mechanical speed control via knob -Manual column lifting with counterweight -Electrical control box -Suitable for small containers -Total height: 1300 mm -Overall dimensions (L×W): 600 × 600 mm (with control box: 600 × 800 mm) -Max disk lifting height: 600 mm -Motor power: 1 HP (0.75 kW) -Speed range: up to 2800 RPM Predpfxewwh Hgj Adlec -Power supply: 220/230 V Keywords: dissolver, mixer, process equipment, mixing machinery, agitator, machine sales, used machines, chemical industry, cosmetics industry, production line, mixing technology, chemical production, Diamac

Condition: used, This listing is for the H+P Komet Variomag Poly 15 Magnetic Stirrer The unit is in full working condition and is ready for immediate use The Variomag Poly 15 is a precision-engineered, 15-position direct-controlled magnetic stirrer built for laboratory applications requiring simultaneous mixing of multiple samples. Developed by Variomag-USA (2mag GmbH, Germany), this stirrer is ideal for chemical, microbiological, biotechnical, and medical environments. Core Features Direct-Controlled Operation: Offers simple, immediate speed control for easy use. Inductive Drive: Wear-free and low-maintenance magnetic induction ensures quiet, long-lasting operation. Digital Speed Control: Microprocessor-based for consistent performance, with memory recall for repeated tasks. Soft Start Function: Prevents splash and ensures gentle acceleration to protect magnetic coupling. Predjxl E Izjpfx Adloc Simultaneous Stirring: Ideal for processing multiple Erlenmeyer flasks or beakers at once—up to 15 × 250 mL or 6 × 1 L vessels. Typical Applications The POLY 15 is designed for a wide range of laboratory tasks, such as: Growing micro-organisms (e.g., aeration and culturing bacterial cultures) Dissolving nutrient media and solids Preventing settling of suspended particles Performing titrations General liquid mixing in R&D, pharma, food science, and education labs

Condition: used, This listing is for the Stuart Scientific SM1 Magnetic Stirrer The unit is not at it's best aesthetically and that is reflected in our pricing, it is however in full working condition and is ready for immediate release. Predpox Npnvsfx Adljc The Stuart Scientific SM1 Magnetic Stirrer is a laboratory bench-top device designed to mix liquids uniformly using a rotating magnetic field. It’s a basic analogue magnetic stirrer often found in educational, research, and routine laboratory settings for mixing solutions, suspensions, or samples without heating The SM1 is suitable for everyday laboratory mixing tasks such as: Mixing aqueous solutions, buffers, and reagents. Suspension of particulates or cells. Routine solution preparation and titration support. Because it lacks a heating element, it’s ideal where temperature control isn’t needed, or when stirring only is required (e.g., during dissolving solids into liquids).

Condition: used, This listing is for a Jenway 3540 pH & Conductivity Meter. The unit is in full working condition and is ready for immediate release. The Jenway 3540 is a versatile combined pH and conductivity meter tailored for water testing applications in laboratories. Its compact design and dual functionality make it an excellent choice for efficient analysis of both parameters. Key Features: - Conductivity Measurement Range: Measures conductivity from 0.01 μS/cm to 1.999 S/cm, suitable for various water quality assessments. - pH Measurement Range: Capable of measuring pH levels from 2 to 20.000, accommodating a wide range of samples. - Temperature Measurement Range: Operates within -10.0 to 105.0°C (14 to 221°F), enabling measurements in diverse environmental conditions. - Versatile Measurement Options: Includes salinity and TDS (Total Dissolved Solids) measurement, resistivity, and ORP/Redox measurement via the pH channel. - Ultra-Pure Water Function: Ensures ideal temperature compensation for precise readings in ultra-pure water applications. - Temperature Compensation: Offers both manual and automatic temperature compensation with an adjustable temperature coefficient (0.00 to 10.00 % per °C). - Adjustable Conductivity-to-TDS Factor: Customize the TDS factor from 0.4 to 1.0 for accurate conversions based on specific sample conditions. - User-Friendly Features: Selectable units for temperature (°C/°F), ready indicator, and measurement hold features enhance usability. - Data Management: Store up to 500 data sets with date and time stamps, ensuring comprehensive record-keeping. - Output Options: USB or RS232 output enables easy data transfer to software or printers, facilitating analysis and reporting. - GLP-Compliant Data Storage: Maintains compliance with Good Laboratory Practice (GLP) standards for traceability. - Compact Design: Features a built-in stand and wall-mount option, saving valuable lab space. Pjdpfeyk Dwyex Adljrc Applications: - Water Quality Testing:Ideal for testing pH and conductivity in drinking water, wastewater, and industrial applications. - Laboratory Research:Useful in laboratories for environmental monitoring and experimental setups requiring precise pH and conductivity measurements. - Aquaculture and Hydroponics:Supports monitoring water parameters critical to fish farming and soil-less cultivation, ensuring optimal growing conditions. SpecificationsManufacturerJenwayModel3540ConditionUsedSerial Number01298Stock Number29042

Condition: like new (used), Dissolver Vollrath EWTMV 0.5 Previously protected design Power: 0.3 kW Prodpfe Aa Iuwex Adlsc Speed range: 145-2000 rpm Absolutely new condition!!!

Condition: used, This listing is for 1 of 2 Hanna HI 180 Speedsafe Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The Hanna HI 180 Speedsafe Magnetic Stirrer is an excellent choice for laboratories seeking a compact and efficient mixing solution. Here’s a detailed overview of its features and applications: Key Features: Compact and Lightweight Design: Its small footprint makes it perfect for laboratories with limited bench space. Attractive Colour Options: Available in various colours, it allows easy identification of different samples, enhancing workflow efficiency. Prodjxxz U Rspfx Adlsc Electronic Speed Control: Users can easily regulate stirring speed through electronic controls, ensuring precise mixing. Speedsafe Mechanism: This safety feature limits the maximum stirring speed to 1000 rpm, even if the load is suddenly removed. This helps prevent accidents and ensures consistent performance. Durable ABS Housing: The stirrer's housing is constructed from ABS, making it resistant to most harmful chemicals typically found in laboratory environments. Maximum Stirring Capacity: Capable of stirring up to 1 litre, making it suitable for small-scale applications. Performance and Applications: The Hanna HI 180 Speedsafe Magnetic Stirrer is ideal for various light-duty laboratory stirring tasks, such as: Mixing Small Volumes of Liquids: Perfect for preparing solutions in microcentrifuge tubes or small beakers. Dissolving Solids in Solvents: Efficiently mixes solids into liquids, ensuring thorough dissolution. Preparing Samples for Analysis: Excellent for creating homogenous mixtures needed for accurate laboratory testing.

Condition: good (used), Dissolver VMA Getzmann Dispermat LC Podpfxj Adql Ho Adlerc Power: 0.3 kW Speed range: 0-10,000 rpm Toothed disc: 50 mm (new) In good, ready-to-use condition, directly from production!!!

Condition: excellent (used), Dissolver Niemann KDV 1500-136 Ex-protected design Power: 100 kW Speed range: 270-800 rpm Niemann speed control Electric container chuck Complete with control cabinet Documentation available Psdpfx Adoz I Rh Aslsrc In very good condition, directly from production!!!

Condition: excellent (used), Dissolver Niemann KDV 790-79 Previously used, protected design Power output: 58 kW Speed range: 290-1000 rpm Pedpfjz I N Unex Adlerc Complete with control cabinet Documentation available In very good condition, directly from production!!!

Year of construction: 2008, condition: used, functionality: fully functional, FREWITT MF-LAB – PHARMACEUTICAL LABORATORY MILL / GRANULATOR Prodpjzxdgijfx Adlsc For sale: FREWITT MF-LAB laboratory mill / oscillating sieve mill, used in pharmaceutical applications, in excellent used condition. The machine is supplied with an extensive package of 13 original sieve inserts in different sizes, as well as comprehensive original documentation and qualification documentation. TECHNICAL DATA Manufacturer: FREWITT SA, Switzerland Model: MF-LAB Year: 2008 Serial No.: 6180310817 Electrical supply: 400 V / 50 Hz Current: 16 A Design: ATEX APPLICATION The MF-LAB is designed for laboratory and pharmaceutical applications and can be used for gentle size reduction, calibration, and sieving of dry or moist products. Particularly suitable for: - Pharmaceutical R&D - Laboratory and pilot applications - Granule calibration - De-agglomeration - Sizing and sieving - Heat-sensitive products EXTENSIVE SIEVE PACKAGE A major advantage of this machine is the large number of included sieve inserts. Included are 13 marked sieve inserts in 9 different designs/sizes. All sieves shown in the photographs are included in the scope of supply. DOCUMENTATION Comprehensive original documentation and qualification documentation are available with the machine. CONDITION Excellent, very clean used condition from pharmaceutical use. Inspection and demonstration can be arranged by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged upon request. CYCRON GmbH Switzerland Invoice will be issued by CYCRON GmbH. Subject to prior sale and errors.

Year of construction: 2022, condition: like new (used), Due to the closure of our laboratory, we are offering a wide selection of laboratory equipment for sale, all in very good to excellent condition. All equipment has been used as intended, regularly serviced, is fully functional, and ready for immediate use. Our current inventory includes: - GCMS (Shimadzu GCMS-TQ8040 NX, Nexis GC-2030) - LC MS/MS (SCIEX Triple Quad 6500+, Shimadzu LC-40Dx3) - Shimadzu UV-1900i Spectrophotometer - Titan MPS Perkin Digestion System - Millipore Milli-Q Direct 8 Water Purification System - Vacuum Pumps - various units - Heating Mantle Pedpfsxmhfrex Adlerc - Q-Msystem Pollab Temperature and Humidity Recorders - Shakers - Centrifuge - Pipetting Station - Ohaus Balance: Explorer EX12001/M - Rotary Evaporator - Cryogenic Mill - Multitube Vortexer DVX 2500 VWR Sample Preparation Device - Emergency Showers - Laboratory Island 3000/1800 - Gas Sterilizer - Glycol Chiller and many more. This is an excellent opportunity for research institutions, universities, and companies in the biotechnology, chemical, and medical industries to acquire high-quality equipment at attractive prices. We invite you to contact us and view the equipment on-site in Olsztyn, Poland (Warmia-Masuria Voivodeship).

Condition: used, functionality: fully functional, Instrumentation Laboratory ILab Aries Clinical Chemistry Analyzer. ILab Aries can perform photometry, turbidimetry and potentiometry test. The throughput is up to 280 photometric +160 ISE tests/hour to give a total of 440 tests/hour. 280 photometric tests/hour, up to 440 tests/hour with the ISE module. Bench top system. Podoupwawopfx Adlorc Integrated sample bar code reader with host query. Sample Rack allowing the use of primary tube without the need for adapters, and cups. 68 sample positions with the possibility of continuous loading. Automatic pre-dilution of samples as required. Automatic re-run of test as required. Integrated Reagent bar code reader. Real-time update of reagent level, reagent stability, calibration stability. Low reagent level alarm. 56 refrigerated positions on board. Integrated ISE module for the determination of Na, K, and Cl on serum, plasma and urine. Up to 3 reagents per test. Multi point calibration curves with up to 8 calibrators. Automatic generation of calibration curves from a master calibrant. Compact size: W 1100 mm, D 650 mm, and H 500 mm Weight: 45 Kg Good working condition. Please check out our other listings as well.

Year of construction: 2025, condition: like new (used), functionality: fully functional, 12 months warranty, available from 12/2026, like new, additional images available upon request - with frame - TS version, pass-through cabinet with fully insulated stainless steel doors, locking mechanism to minimize contamination - e.g. for material transfer between cleanroom and non-cleanroom environments - Maximum temperature: 250 °C - Oven chamber volume: 161 liters - External dimensions without frame: 745 x 1233 x 584 mm (W x H x D) - Oven chamber dimensions: 560 x 720 x 400 mm (W x H x D) - Adaptive, multifunctional, digital PID microprocessor controller with high-resolution TFT color graphic display - Timer: Digital countdown timer with target time indication, adjustable from 1 minute to 99 days - SetpointWAIT function: Process time starts only when the target temperature is reached - Calibration: Three freely selectable temperature values Prjdjz Tf Ddopfx Adlec - Adjustable parameters: Temperature (Celsius or Fahrenheit), speed of the circulation fan, exhaust flap position, program runtime - Further adjustable parameters: Time zones, daylight saving time - Air turbine: Electronically controlled, adjustable in 10% steps, low noise - Fresh air: Addition of preheated fresh air via electronically adjustable exhaust flap - Exhaust: Exhaust nozzle with throttle valve, electronically controlled - Maximum 8 inserts possible (only 2 included) - Maximum load per shelf: approx. 20 kg - Maximum total load: 210 kg - Power: 3200 W - Voltage: 230V, 50/60 Hz - Oven weight: 125 kg + frame - Documentation, CE declaration The oven is not to be used for substances containing solvents. Oven, industrial oven, heating cabinet, heat oven, laboratory oven, drying oven, temperature oven, test cabinet, universal cabinet. Precise drying, heating, tempering, aging, curing, testing, and hardening in research, science, industry, and quality assurance.

Condition: used, functionality: fully functional, Laboratory rolling mill, Tröster, approx. 5 kg, roll diameter approx. 200 mm, roll width approx. 370 mm. Functionality is present; safety features do not meet the latest standards, but are still functional. Disassembly and collection are the responsibility of the buyer. Prsdsz Rmzxspfx Adljc

Year of construction: 2014, condition: used, The lot consists of: (1) Bale Breaker B3, bale opening unit / R%K Solution Systems; Serial No.: 100011/2014 (1) Post-bale-breaker elevating conveyor Psdpfxj Afm Dne Adlsrc (1) Conveyor, Promac Technical Details: 14.2 kW; 400/690 V; 50 Hz; 2,200 kg

Condition: used, functionality: limited functionality, machine/vehicle number: -, Comprehensive and diverse package of specialized laboratory, measuring, and testing equipment. Prjdpfxsz Suxhe Adlsc The set comes from a professional laboratory/quality control department and includes several dozen items essential for testing physical properties, performing precise measurements, monitoring the work environment, and diagnosing machinery. The package includes equipment from renowned brands (including Voltcraft, Elcometer, Mitutoyo, Festo, SMC, and Balluff), which guarantees high reliability and measurement accuracy. Electronic measuring instruments: multimeters, infrared thermometers (pyrometers), including Voltcraft, conductivity meters, pH meters, digital light meters (including UV), and lux meters. Specialized and non-destructive testing (NDT): advanced Elcometer coating thickness gauge (model 456), test panels for penetrant testing (including Sherwin PSM-5), optical refractometers, and image quality indicators (IQI). Precision mechanics and standards: a comprehensive collection of gauges (plunger, ring, and thread gauges, including Leitech), surface roughness standards (including castings), and roughness testers (e.g., Mitutoyo SJ-210). Automation and pneumatics: air preparation units (filter-regulators with lubricators) from Festo and SMC, pneumatic grippers (Schunk), actuators, valves, Balluff switching mechanisms, and inverters (Invertek Optidrive). Accessories and consumables: hydraulic gear pump, lathe chucks (Sandvik), machine rubber bumpers (Haas), steel ball bearings, hanging scales. Location: 41-200 Sosnowiec, Poland Transportation: Transportation is possible throughout Poland and Europe, subject to prior agreement. Additional photos, videos, and transportation costs are available upon request. VAT invoice available.

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) Pedpfx Aezr Ircsdlsrc • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer a complete, ready-to-use mineralizer in perfect condition. Mineralizer model: Titan MPS External Exhaust. Psdpfx As Afubhodlsrc Please feel free to contact us and arrange a visit to see the equipment on-site.

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. Psdpfx Adszd Unbelsrc This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: like new (used), Niemann Butterfly VKDVB 332-20 Dissolver Vacuum version with Busch vacuum pump Power 15 kW with wall scraper Speed range 0-240 rpm, adjustable via frequency converter Control cabinet 3 stainless steel mixing tanks, each 300 l Pjdpfxswmaxms Adlsrc Matching: Niemann/Gehalin H 500 squeezing device D = 700 mm for 300 l mixing tank Top condition, straight from production!

Condition: used, IKA LR 2000 V Laboratory Reactor For sale is a professional, modular IKA LR 2000 V laboratory reactor system in ready-to-use condition. This configuration is the ideal workhorse for product development, simulation, and small-scale production (e.g., in the fields of cosmetics, pharmaceuticals, chemistry, or food technology). Thanks to its vacuum compatibility and the combination of an anchor stirrer and a high-performance disperser, the system is perfectly suited for the production of stable emulsions, creams, and lotions. Here you will receive a complete, ready-to-use system. The expensive double-walled glass vessel with bottom outlet, the heating bath with temperature sensor, and the Ultra-Turrax T25 including shaft are already included in the package. You save yourself the tedious and costly individual purchases, which would amount to thousands of euros! Scope of delivery & technical components: Reactor vessel: Double-walled 2.0-liter vessel made of high-quality borosilicate glass 3.3. The jacket allows for precise heating and cooling via external thermostats. Equipped with a practical bottom outlet valve for clean emptying. Prjdpfjz I Szwex Adlsc Mixing tools: Integrated anchor stirrer for optimal wall scraping with viscous masses, as well as a suitable flow breaker to prevent vortex formation and for perfect vertical mixing. Dispersing device: IKA ULTRA-TURRAX T25 including matching dispersing shaft. Enables highly effective homogenization and size reduction directly during reactor operation. Drive & control: Robust IKA control unit RE 162 P for powerful stirring even at low speeds. Temperature control: Water bath LT5 control including external temperature sensor. The sensor measures the temperature directly inside the reactor medium, which enables highly precise control via the water bath. Accessories: Complete stand system for the secure mounting of all components as well as all necessary holders. Note: The sale is without control software. The system can be fully, independently, and easily controlled directly via the hardware controls. "Everything from one source: We will gladly offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Dissolver Niemann KDV 491-50 Power: 37 kW Speed range: 300-1400 rpm Niemann Speedcontrol All functions controlled via the control panel New clamping jaws Podpfxozidpxe Adlerc Electric container clamping device Control cabinet

Condition: ready for operation (used), Dissolver Niemann KDV 241-25 Power: 18 kW Speed range: 290-1650 rpm Niemann Speedcontrol All functions controlled via the control panel Psdpozidd Aefx Adlorc New clamping jaws Electric container clamping device Control cabinet