Used L + Z Lathe, Turning Machine for sale (109,050)

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Pjdpfx Aszkbirjf Sjrb Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Pedezav D Djpfx Af Sjrb Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) Pedpfxow Uf Hwo Af Sjrb - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm Prsdelzm Eqepfx Af Sob spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY Psdpfx Afoyhn A Ij Ssrb The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization).

Condition: good (used), functionality: fully functional, Internal article number: 26095 Pedpoz E Nxzefx Af Serb Lathe Weiler Condor 81, Type B Serial number: 84112 The machine is equipped as follows: Three-jaw chuck, Weiler 160 Base holder, Multifix "B" MK3 drill chuck Chuck guard 3-axis digital display (K&C) 4x Multifix "B" steel holders Collet set with draw tube Technical data: Center height 165 mm Center distance 750 mm Spindle speed: 22 to 2800 rpm Spindle bore 40 mm Short taper spindle head, DIN 55027, size 5 with bayonet lock Tailstock, MK 3 Feeds from 0.015 to 0.46 mm/rev Dimensions (L x W x H): 200 x 100 x 130 cm Weight: approx. 1000 kg In good technical condition and fully functional! You are welcome to inspect the machine while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Pedpsyaywhjfx Af Serb Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Prjdpfx Aozacwdof Seb Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm Predoxdmgvepfx Af Ssb CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, L & Z Lathe / DREHMA D 410x1500 / New - Unused / Showroom Machine -CE marking -3-axis digital display -Turning diameter over bed: 410 mm -Turning diameter over cross slide: 225 mm -Turning diameter in the crotch: 580 mm -Turning length: 1500 mm -Spindle bore: 52 mm -Speed range (geared): 45 - 1800 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch etc. -Tailstock MK 4 -Drive power: 3.5 kW -Central lubrication -Electric chuck guard -Chuck guard via steel support -Fixed and traveling steady rest -Multifix base with inserts -3-jaw chuck 200 mm Prsdpfxozv H Iko Af Sob -4-jaw chuck 250 mm -Faceplate -Coolant system -Work light -Foot brake -Traveling center & drill chuck -Machine feet -Documentation Dimensions: L x W x H 2.2 x 0.1 x 1.6 meters / Weight 1850 kg Errors and omissions excepted.

Condition: used, Year of construction: 1990, Killinger copy lathe with mechanical tracing Centre distance 1200/1500 mm Prjdpfewuxpaox Af Ssb Copying length 1100/1400 mm Centre height 250 mm Motor power 1.5 kW Manual feed Speed 2800/1580/870/670 rpm Space required 2080 x 750 x 1150 mm Weight 350 kg Year of manufacture 1990 Price 3000.-

Condition: excellent (used), Schaublin 102N – Precision Lathe For sale is a Schaublin 102N precision lathe, a high-quality Swiss machine tool known for its accuracy and robust design. This machine is particularly suitable for precise turning operations, small-series production, model making, tool making, and general precision engineering. Technical Data Manufacturer: Schaublin, Switzerland Model: 102N Machine Type: Precision Lathe Design: Lead and feed screw lathe Center Height: approx. 102 mm Center Distance: depends on the model Spindle Mount: Schaublin-specific design Spindle Bore: depends on the installed spindle Speed Range: depends on the motor and belt configuration Drive: Electric motor Prjdpfx Asz Eqgmsf Ssb Rotation Direction: Right/Left, if equipped accordingly Mounting: Workbench/subframe mounting Accessories: - Collet chuck system including a set of collets The machine is in very good condition and operates perfectly.

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg Psdpsqwlmqjfx Af Sjrb

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Podpfx Afswym Nfe Serb Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: refurbished (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, Fully equipped machine IMECA BOSS 32 L edger Turning tool holder included Predpfozic Ruox Af Sob 6 fully overhauled motorized tools New tool drive gearbox. New Y-axis, motor, and ball screw. Clamping and guiding device provided with the machine New edger channel 380 V / 220 V transformer included

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. Pedexz Tfajpfx Af Ssrb - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: excellent (used), !!!DEMO MACHINE!!! For sale: a Drechselmeister MIDI 2 Plus lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: - Center height approx. 178 mm / Swing diameter 355 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 RPM - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) safety groove - Tailstock with interchangeable tailstock spindle 100 mm MK2, trapezoidal thread, and measuring scale! Prjdpfxszgr Sij Af Sjb (Optional: interchangeable tailstock spindle with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, turning tool, woodturning, turning, machine Reference: R-D1618

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly Prjdpfezz S R Isx Af Sob stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC-Steuerung Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Pjdpfx Aezx Nx Rjf Sjrb Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes The machine can be viewed under power by arrangement.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Podpfx Afswz Rifo Sorb Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: excellent (used), DEMONSTRATION MACHINE!!! For sale is a Drechselmeister Stratos ECO wood lathe with a center distance of approx. 680 mm. The machine is in very good condition and has been refurbished and inspected by our qualified staff. (Fully functional) Technical specifications: - Center height approx. 230 mm - Swing over bed approx. 455 mm (up to 800 mm with optional outboard turning device!) - Center distance approx. 680 mm (expandable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Spindle speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) Prodpfx Afsy Nm Rhj Ssb - Motor: 1.5 kW / 2 HP (230 V connection) - Weight: 177 kg The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: wood turning lathe, metal lathe, lathe, wood lathe, turning, woodturning tools, woodturning, turning machine Reference: R-D1618

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale is a TEKNATOOL Nova Nebula 230 DVR woodturning lathe with a direct drive ranging from 50 to 4,000 rpm. The demonstration machine is in excellent condition. Technical specifications: - Center height: approx. 230 mm - Maximum distance between centers: 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper: MT2 (Morse Taper 2) - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-position indexing system - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg Predpoy N R A Iefx Af Seb - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Forwarding delivery: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related keywords: woodturning lathe, lathe, turning machine, woodturner, woodturning, turning tools, wood spinning, turning, machine Reference: R-A0117

Condition: used, functionality: fully functional, L&Z precision lathe, Leinen & Boley model, with lighting, quick-change tool holder Multifix, steady rest, coolant pump, and 125mm chuck. Psdpfxezpd T Ds Af Ssrb (A 165mm chuck is also possible), turning length 500mm, various related parts included, with a 50-liter compressor. €1500.00

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an almost-new Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The demonstration machine is in original condition, meaning you receive the full warranty. Technical Specifications - Center height: 280 mm - Swing over bed: 550 mm (expandable up to 1,000 mm with optional extension bed and outboard turning attachment) - Distance between centers: approx. 780 mm (expandable!) - Spindle thread: M33 x 3.5 with ASR (European) safety groove - Spindle and tailstock Morse taper: MK2 Prodpfx Afstpplne Ssb - Inverter drive (3 belt speeds): - Speed 1: 60 – 1,200 rpm - Speed 2: 100 – 2,200 rpm - Speed 3: 150 – 3,700 rpm - Tailstock quill travel: 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor: 3 HP - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight carrier: Austria: € 125.00 incl. VAT Germany: € 150.00 incl. VAT South Tyrol: € 180.00 incl. VAT If you are interested in this machine, please provide your complete address via the contact form so that we can process your inquiry professionally. Thank you, your NEUREITER Team Related Keywords: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, woodturning tools, turning, machine Reference: R-A0117

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE 300 lathe with a motor output of 3 HP. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Center height 300 mm - Center width 1,000 mm (extendable*) - Electronic speed control (100-450 / 300-1,100 / 750-2,700 rpm) - Hollow spindle D = 20 mm with inner cone MK3 - Quill travel 150 mm - Motor 3 HP / 400 V - Weight 276 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Prodpfxetpnu Ro Af Ssb If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, woodturning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117