Used Kolbus Ds 391 for sale (2,250)

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table Dedpox Dkk Sofx Agvech - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2004, Book stacker Kolbus DS 391 Year: 2004 For stacking of books. Universally usable as stacker and emergency delivery Description: Dcjdpfx Agsypmrdevjh - Turning device - Pass-through stacker - Straight delivery Max. mechanical speed: up to 65 cycles/min Maximum size range: 382 x 305 x 80 mm Minimum size range: 100 x 100 x 4 mm Maximum pile height: 325 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), Rexroth HDS05.2-W300N-HS32-01-FW Controller, SN:291391-00396, used, normal signs of use, 100% functional, scope of delivery as per photos Dedji D Tqqepfx Agvsch

Year of construction: 2007, condition: used, Case maker Kolbus DA 260 Year: 2007 Description: - Board magazin for manual loading - Centre strip infeed (stiff) Dodpfx Agezba Ebovoch - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing quarter-bound cases in 2 passes - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 40 cycles/min Size range opened case (max): 670 x 390 mm. Size range opened case (min): 205 x 140 mm. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 34, Kolbus Casemaker, complete with pallet feeder type PPA290 Case – size range opened case (width x height) min. 300 x 210 mm, max. 1050 x 735 mm Cloth (width x height) min. 765 x 200 mm, min. 1080 x 290 mm Boards Thickness min. 1 mm, max. 4 mm Mechanical speed: Up to 40 cycles/min Board in-feed, Stiff spine in-feed, Flexible spine in-feed from roll, In-feed cloth, glue tank, glue rollers, pressing device, delivery belt Dcodpewnqtkofx Agveh Machine no: 34, Books produced: 2 million

Year of construction: 1976, condition: used, Embossing machine Kolbus PE - PE 70 Year: 1976 Tandem configuration consisting of 2 interconnected Kolbus PE 70 embossing machines. - Case pre-stacking conveyor Dcjdszat H Aopfx Agvsh - Case bending station: DBA - Foil transporting device - Case infeed 90° swivelling

Condition: used, Year of construction: 2005, PUR + EVA Hotmelt spine glue unit Dcodpfxjzat Hio Agvjh Kolbus Year 2005 Roller system With mode selector switch (PUR or EVA-Hotmelt) Compatibel with: KOLBUS KM 473 perfect binder

Condition: used, Year of construction: 2005, PUR + EVA Hotmelt spine glue unit Kolbus Year 2005 Roller system Dedpfx Aszat E Segvjch With mode selector switch (PUR or EVA-Hotmelt) Compatibel with: KOLBUS KM 473 perfect binder

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Kolbus SW.E 500 is a high-performance corner-cutting machine for the industrial processing of high-quality cardboard packaging. It was specifically designed for the automated production of luxury packaging and rigid boxes. The Kolbus SW.H 500 is a high-performance box-making line from the German manufacturer Kolbus Group GmbH. The machine processes pre-scored and corner-cut cardboard sheets. The Kolbus SW.H 500 applies adhesive to the pre-formed creases, erects the side walls, and precisely fixes them to create a stable, foldable rigid cardboard box. Dedpozblxmefx Agvsch

Condition: good (used), Year of construction: 2006, Built in 2006 Size 310 x 430 x 80 mm Size trimmed 300 x 420 mm min 100 x 120 x 2 mm Feeding height max 80 mm Speed max 6.600 c/h Equipment - Einfuhr von rechts - Automatisch Magazin für Inlinie Produktion - Schnittzähler - Austauschbare Schneidkassetten (Standardsatz) - Messervoreinstellgerät - Satz (Sätze) von Messerhaltern: 2 - Messersatze insgesamt: 2 Description: - Right hand infeed - Automatic hopper feeder for inline production Dcsdpfx Aozbkmpjgvjh - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Cleaned good working conditon

Condition: used, Year of construction: 2004, Gathering machine Kolbus ZU 840 Year: 2004 Description: - Number of gathering stations: 16 - ATC thickness control - Hand feeding station: 2 - Set up element - Excluding pump(s) - Excluding delivery For coupling with an existing book block production line. Compatible with: Sigloch SB, Müller Martini Collibri, Kolbus RF book block production line. Maximum size range: 420 x 320 mm Minimum size range: 105 x 105 mm Dodpfxswut D Ee Agvsch Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2008, Manufacturer: Kolbus / Cermi • Model: XCR 650 • Machine Type: Front-Cut / Front Cutting Unit for Flap and Brochure Production • Application Area: Print Finishing / Book and Brochure Manufacturing • Function: – Gathering channel with feed and alignment of brochures – Opening of inserted flaps – Front-Cut: Precise front cut for processing flap brochures – Automatic feeding and stacking of finished products • Fields of Application: – Processing of flap brochures and similar print products – Inline integration into finishing or binding lines – Can also be used as a stand-alone machine • Format Range (typical): – Max. trimmed size approx. 480 × 350 × 50 mm – Min. trimmed size approx. 125 × 100 × 3 mm – Max. untrimmed size approx. 480 × 375 × 50 mm – Min. untrimmed size approx. 125 × 105 × 3 mm • Performance: – Mechanical output depending on settings up to approx. 6,000 cycles/h (single cut) – Throughput mode up to approx. 8,000 cycles/h possible :contentReference[oaicite:1]{index=1} • Special Features: – Precise front cut for demanding brochure formats – Suitable for inline production lines – Robust, industrial-grade design Dodex Hxq Iopfx Agvjch • Typical Industries: Print finishing, bookbinding, printing houses

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station Djdpfx Aey Uvfregvech - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: good (used), Year of construction: 2007, Ref:11104 . 2007 Kolbus KM473 Ratiobinder Line 8,000 p/h EVA perfect binding line with gauzing. Equipped with: 18 station ZU 804 gatherer with over track feeding including 2 x hand feed AS 800 reject station for over or incomplete books Downstream delivery belt Ratiobinder KM473 - 24 clamps with ‘Co-pilot’ touch-screen monitors Milling/brushing, equalizing milling & brushing units Interchangeable gluing system comprising; Kolbus LH370 EVA hotmelt pre-melters EVA hot-melt spine glue EVA hot-melt disc side glue Gauzing unit Pile cover feeder with scoring Dcjdpfxsy T Ii Hj Agvoh 2 x Cover nipping/pressing stations Flat TS.Z conveyor system to (2010) Kolbus HD143.P pile trimmer with ‘Co-Pilot’ pre-setting Specification: Book size, Max: 383 x 320 mm Max: 460 x 190 mm Min: 105 x 100 mm Book thickness : 3 -- 70 mm Mechanical speed, Max: 8,000 cycles/hr.

Condition: good (used), Kolbus ECK 100 Automatic Corner Cutter Dedsy Tu T Sepfx Agvoch Made in Germany, Kolbus GmbH & Co. KG. Very good condition. This is a professional, production-grade device for trimming corners for hardcover binding. Year of manufacture: 2009. Sturdy construction ensures precise operation. Interchangeable blades. Adjustable margins. One set of blades included. Compressed air powered.

Condition: good (used), Year of construction: 1998, CNC Vertical lathe DS Dorries Scharmann - VCE 2000 FMC MACH-ID 9088 Dcedpfx Agjwb Ayijvsh Make: DS Dorries Scharmann Type: VCE 2000 FMC Control: SIEMENS 840C Year: 1998

Condition: used, Year of construction: 2015, Beading machine DS-Lifting - H-9000 Djdpfswrywgsx Agvoch

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 123, We are selling a fully functional Kolbus DA260 casemaking machine. The machine has approximately 12 million cycles. It comes with a CD containing the software. Testing of the machine in production is possible by arrangement. Djdpfx Agoyw Tc Tjvjch

Condition: used, Year of construction: 2004, Format: 310 x 430 mm Dedjy Tacxepfx Agvjch Equipment: Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

Condition: used, Year of construction: 1976, machine/vehicle number: 193, For sale: Kolbus PE machine – automatic stamping/foil blocking machine. The machine is designed for embossing hardcover PU materials used in diaries, notebooks, and books. It operates in an automatic cycle: cover feeding, positioning, embossing, and removal. The machine is equipped with a system that allows stopping in the upper position, enabling blind (dry) embossing with material discoloration. Year of manufacture: 1976, rebuilt in 2012. The machine is connected and operational; testing is possible. Actual working speed for blind embossing – 18 units per minute. Includes many additional components – suction cups, markers, etc. The sample video does not depict the machine for sale. Dodpfx Agsx Rcgnjvoch

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 25 kg, product height (max.): 150 mm, product length (max.): 930 mm, product width (max.): 500 mm, production capacity: 100 unit/h, For sale is a new semi-automatic bottom-up bagging system. The system was purchased in 2024, has been dismantled, repackaged, and has never been operated. The original purchase price was €235,000! TECHNICAL DETAILS (according to the manufacturer) Performance: approx. 100 bags/hour Bag weight: 20, 25 kg Bag sizes: bag width 500 mm, bag length 700–930 mm, bag depth 150 mm Bag material: Paper (2–5 layers) with PE inner liner or PE Weighing range: 10–30 kg Weighing accuracy: 2 Sigma +50g/–0g Weighing accuracy: compliant with PTB MACHINE DETAILS Footprint: (approx.) 20 x 4 m Control voltage: 400 V, 50 Hz – 24 DC, 3 phase Electrical power: 15 kW Electrical components: Siemens/Eaton PLC: S7-300 Drive motors/Gearboxes: SEW Pneumatic components: Festo Material: Stainless steel DIN 1.4301 Cable tray: Brand Cablofill Protection rating: IP54 Zone: ATEX zone, inside zone 20 up to 500 mm radius, zone 21, 500–1000 mm radius, zone 22 Working pressure: 6 bar Compressed air consumption: V = 89 Ndm³/bag Pneumatic connection: 5–6 bar Air requirement: 400 Nl/min Protection class: IP54 Aspiration air: 45 m³/min Dedjy N Tm Ajpfx Agvjch Note: Additional technical data can be found in the attached order confirmation.

Condition: used, diameter div. number 16x tool adaptor SK 50 Tool Package DS SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available Dcedpfx Aowtrztogvjh

Condition: used, Year of construction: 1982, Format: 0x0 Dcedpfxox Rh Dxj Agveh Equipment: Corner cutter, manual

Condition: used, Year of construction: 2007, Format: 1360 x 1200 mm Equipment: Dcedpfxsyxqvgj Agvoh Automatic palletizing PC control with batch view Layer formation Pallet dimensions: 1360 x 1200 - 1000 x 800 Speed: 30 stacks/min.

Condition: excellent (used), Year of construction: 2014, Ref:11081 . 2014 Kolbus DA-270 Casemaker For high-speed production of hard book covers, Lever Arch files and games boards. Comprising: ‘Co-pilot’ system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board magazine feeders Central soft spine feeder with double reel holder for auto-splice and cutter for waste *Special board centre strip cutting device Dcjdpfx Ajyzy Rrsgveh Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit with pre-melter* Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals. N.B. Compressed air and water supplies to client’s account. Accessories: Board centre-strip cutting device for cutting rigid centre board strips to width, with possible width variance from product to product for digital book production. ° Board sheet thickness max. 2 mm ° Width max. 1,500 mm | height min. 140 mm | max. 390 mm ° Board centre-strip max. 7 mm | max. 60 mm Kolbus ECK standalone corner cutter to work with case maker Specification: Size of opened case, Max: 670 x 390 mm Min : 205 x 140 mm Centre strip width : 6 - 90 mm, thickness 1 – 4 mm Joint width : 4 - 15 mm Turn-in width, closed : 8 – 15 mm Output, variable : up to 65 cycles/min Floor space : L: 6700 x W: 3000 x H: 2,200 mm Electrical loading : 15 kW (3ph, 400V, 50 Hz) Air requirement : 33 Nm3/h 6 bar.