Used Kolbus Buchstraße for sale (139)

Condition: refurbished (used), Year of construction: 1961, We are selling an operating Casing in Line from the Berlin location. This consists of a casing-in machine built in 1961 and a pressing unit built in 1973. An extensive modernisation took place in 2021/2022. The drive of the machine and the safety equipment were renewed. The machine can be inspected at any time. Speed 500-800 pcs/h depending on personnel. Kdedpfxen Nv Sdo Ah Est

Year of construction: 2008, condition: used, Dust jacketing machine Kolbus SU 631 Year: 2008 Description: - Inline production - Setup element: Solema stand-up unit - year 1999 - Infeed conveyor - Automatic jacket feeder - Scoring station - Book opening station Kdsdpfx Ahsz Dgk Ej Eet - Case separation station - Case closing station - Delivery to the right Book stacker Theodor Attenberger Fancy Year: 2009 Description: - Compensating stacker - Turning device - Roller table delivery on the left and right

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, Kolbus DA 270 Used hardcover production machine for book covers, file cases, calendar backs, or games Year 2010 Standard equipment Kedpfozxdhmex Ah Eodt Cardboard pre-stacking belt Sheet feeder for non-stop operation Fault monitoring during gluing Utility cylinder with grippers and interchangeable die plates External glue application Unit for padded covers Automatic cover counter Programmable automatic settings, motor-driven adjustments Speed up to 65 cycles/min Unit for processing roll spine material Heated glue application rollers and doctor blade Viscosity control unit for automatic water supply to ensure consistent glue viscosity Unit for mirror gluing with hotmelt Board spine magazine Small format unit Large format unit (height) for open cover format of max. 670 × 405 mm Large format unit (width) for open cover format max. 678 × 390 mm, width max. 718 mm Corner trimming device (manual operation) Unit for processing asymmetric covers and sheets Unit for processing thin boards Optional equipment for viscosity control unit Available in stock

Condition: excellent (used), Year of construction: 2019, Kolbus AutoBox AB year 2019 machine for box production Kdedpjx El N Iofx Ah Ejt easy operation servo controlled quick job change suitable for corrugated boxes enables box-on-demand production MC MultiCut Module PR module many box types (FEFCO) scoring, cross and linear cutting, slitting incl. several equipment (glue, new knives) delivery section ready for use good condition available immediately

Year of construction: 2009, condition: used, Case maker Kolbus DA 270 Year: 2009 Description: - Digital display - Semi automatic setting - Automatic case counter - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (flexible) Kdjdpfoz A A I Dsx Ah Ejt - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Pressing station - Stacking delivery - Belt delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Joint width: 4 - 15 mm Cloth width: 223 x- 708 mm Cloth height: 130 - 428 mm Board thickness: 1 - 4 mm Board width: 95 x 328 mm Board height: 140 x 390 mm Max. mechanical speed: up to 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Head & Tail Banding Machine Kolbus HL Head & Tail Banding Machine Kolbus HL Year 1970 Kedszz A R Ejpfx Ah Esdt Format / Size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Leistung / Speed up to 36 cycles/min. Bestehend aus / Consist of: 1) Anleimstation / Gluing Station  2) Kapitalband- und Hinterklebestation / Head and tail banding station 3) Andruckstation / Pressing Station Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Buchformpresse / Book Forming Press Kolbus FE Kjdpfxezz A Rxo Ah Ejdt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Nipping and Smashing Kolbus FM 405 - AB 370 Falz- und Buchblockpresse / Nipping and Smashing Kolbus FM 405 - AB 370 Kodpfozzynzox Ah Esdt Buchblockfalz- und Ganzpresse mit Buchblockanleger Book Block Joint and whole Block Press with Book block feeder Baujahr / Year 1988 - Serial-No. 308 Format (unbeschnitten) / Size (uncut) min. 125 x 100 x 6mm - max. 380 x 290 x 80mm Sehr guter Zustand / Very good Condition Maschinengewicht / Machine weight 4200kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Casing-In Book Forming Press Kolbus EMP 36 Kdedszzynnepfx Ah Ejt Casing-In / Bucheinhängemaschine - Buchformpresse / Book Forming Press Kolbus EMP 36 Year 1966 - Serial-No. 306 Block size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Case size min. 125 x 210mm / max. 370 x 62 mm Speed up to 36 cycles per Minute On request: Book Forming Press Kolbus FE Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: KS 842, KOLBUS KS – Machine for Cutting Bookbinding Materials Manufacturer: KOLBUS (Germany) Model: KS (Cardboard and Narrow Slitting Machine) Year of manufacture: 1975 Purpose: Precision longitudinal and cross-cutting of covering materials from rolls or sheets (calico, bookbinding cloth, imitation leather, Balacron, gauze, PVC). Technical specifications: • Maximum roll width: 1,400 mm • Cutting width (longitudinal cut): minimum 50 mm to maximum 1,400 mm • Cutting length (cross-cut): minimum 10 mm to maximum 1,050 mm • Cutting system: Shaft with circular knives for longitudinal cutting + guillotine knife for cross-cutting Kodez A A Hgspfx Ah Ejdt • Speed: 14–36 strokes (cuts) per minute The machine is well maintained, fully functional, and ready for operation. Price: €4,500.00

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 285, KOLBUS PE 0 – Hot Foil Stamping and Embossing Machine for Hardcover Covers Identification Data • Manufacturer: Kolbus GmbH & Co. KG, Germany Kdsdpfxoz A A Aze Ah Est • Type: PE 0 • Serial number: 285 • Year of manufacture: 1984 Purpose and Technology • Purpose: Hot foil stamping and embossing on hardcover book covers • Operating principle: Flat press head – the cover is fed onto the working table, while the upper head performs the stamping • Capabilities: Hot foil stamping and blind stamping/embossing, depending on the installed tooling • Foils: Gold, silver, pigment, and other hot-foil materials • Operating temperature: Approximately 130–170 °C, according to the markings on the machine, depending on the foil and application Construction and Equipment • Infeed and outfeed tables with conveyors on both sides of the press head • Automated cover feeding and transport • Belt drive with drive motor • Protective covers over the drive components • Control panel with buttons and selectors • Cycle counter • Safety devices and emergency stop buttons • Large flywheel – mechanical press operating principle • Mobile design for relocation within the production area Format and Productivity – Estimated • Format: Suitable for A5 and A4 size covers • Productivity: Approximately 1,000–2,000 impressions/hour • Productivity depends on: Format, type of foil, number of impressions per cover, impression length, and operating method Price: €14,000.00

Year of construction: 2015, condition: used, Book stacker Kolbus KL 501 Year: 2015 For using as a compensating stacker following a three knife trimmer, for stacking of book blocks, brochures and magazines. Description: - Co-Pilot with touchscreen Kedpfjzy Et Hex Ah Esdt - Compensating stacker - Turning device: 90° oer 180° - Delivery to the right - Roller table delivery on the right Max. mechanical speed: up to 18.000 cycles/h (infeed) Maximum size range: 420 x 320 x 80 mm Minimum size range: 125 x 100 x 2 mm Maximum pile height: max.: 330 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2015, Three knife trimmer Kolbus HD 143.P Year: 2015 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Cycles: 12,9 mio Description: - Co-Pilot with touchscreen - Right hand infeed Kodszx S Rijpfx Ah Esdt - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: up to 4.200 cuts/h Maximum size (uncutted): 450 x 320 x 80 mm Maximum size (cutted): 420 x 305 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum pile height: 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2004, Format: 310 x 430 mm Equipment: Counter 22 Mio Kdedpfx Ajy Tacxeh Eet Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

Condition: used, Year of construction: 2007, Format: 1360 x 1200 mm Equipment: Kdsdpfx Ahoyxqvge Eot Fully automated palletizing of loose stacks and solid containers at a speed of up to 1,800 stacks/hr Automatic Palletizing product infeed via accumulating conveyor Pallet dimensions: 1360 x 1200 - 1000 x 800 travel stop for dropping of very smooth products pallet removal in moving direction Pallet sizes 1,360 x 1,200 or 1,000 x 800mm Speed 30 Stacks/min

Condition: used, Year of construction: 1982, Format: 0x0 Kdsdpfxex Rh Dxo Ah Est Equipment: Corner cutter, manual

Year of construction: 1999, condition: used, Embossing machine Kolbus PE 312 Year: 1999 - Case pre-stacking conveyor - Feeder for cases - Case bending station: DBA - Foil transporting device - Case set up outside machine Kdsdpozvd U Ijfx Ah Eot - Matrix plate 2 - Counter stacker

Year of construction: 1980, condition: used, Cloth cutter Kjdpfjzvd N Sox Ah Ejdt Kolbus: KS 820 Year: 1980 Standard equipped

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 123, We are selling a fully functional Kolbus DA260 casemaking machine. The machine has approximately 12 million cycles. It comes with a CD containing the software. Testing of the machine in production is possible by arrangement. Kedpsyw Tc Tefx Ah Eodt

Condition: good (used), Kolbus VDB Cover bender Kdjdszt H Ufjpfx Ah Est This machine is in very good condition and ready to use. Manufactured by Kolbus, Germany. The pressure rollers feature smooth adjustment of the gap and cover straightening power. The entire unit is mounted on a convenient base with wheels. Working width: 750 mm Power supply: 380V Weight: 150 kg

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system Kdsdpfxexuad Ae Ah Ejt - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Year of construction: 2016, condition: used, Suitable for Kolbus BF 512 Kjdpfxsid Nvwe Ah Ejdt

Condition: used, Year of construction: 2004, Gathering element(s) Kolbus ZU 804 Year: 2004 Description: - Number of elements: 1 - Number of gathering stations: 4 - ATC thickness control Kdsdpfjira T Ejx Ah Ejt Size range: Max. 460 x 310 mm Min. 125 x 100 mm Mech. speed: up to 6.000 cycles/h

Condition: used, Year of construction: 2006, Card gluer Clever & Co Year: 2006 Hotmelt glue unit Nordson Description: - Suitable for: Kolbus KM 411 Kedpfxjhd Nkdo Ah Esdt - Excl. universal bases

Condition: used, Year of construction: 2003, Gathering element(s) Ksdpsuf H Arofx Ah Eodt Kolbus ZU 804 Year: 2003 Description: - Number of elements: 1 - Number of gathering stations: 4 - ATC thickness control Technical specifications: max. signature size 460 x 320 mm min. signature size 125 x 100 mm mech. speed: up to 8.000 cycles/h (price quoted is for 1 element, in total 6 elements available)