Used Knoche Dim Sh-50 Scheibenegge for sale (36,672)

Condition: used, Year of construction: 2015, mech. depth adjustment ring roller hydr. folding scraper for roller / rubber buffer stone protection (Amazone system) / Fsdpforxr Sdsx Akyepn

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, manufactured in 1996, for sale. Model designation: SH-50 Serial number: 450 The machine is currently powered and available for immediate delivery. • P8 power supply, valued at 1500, was renewed in August 2024. • The spindle was repaired in 2017 and has since been used primarily in a single-shift operation, as we mainly produce individual parts and small series. Therefore, the machine has spent most of its time in setup mode. • Machine: Mori Seiki SH50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Configuration: Horizontal milling machine with indexing table • Tools: 60 (BT40) • Number of pallets: 2 (500mm * 500mm) Fodpfsyt Nnpsx Akyepn • Travel: X 630mm, Y 600mm, Z 650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse of the X-axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring during pallet changes is likely damaged, resulting in oil leakage. We have temporarily resolved this by inserting a ball valve in between. We only need to open this when we change the pallets, which doesn't happen very often. The machine is sold as inspected, without any warranty or guarantee. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. The magazine loses its reference point after being switched off for an extended period. The procedure for restoring it is known. If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, Base Machine - SH-5000P - Demonstration Machine Like New • Basic machine, 4-axis • Control: Siemens 840D sl • Table size: 500x500mm • Max. table load: 500kg • X/Y/Z travels: 730/730/830mm • X/Y/Z rapid traverse: 60/60/60 m/min • Milling spindle: • HSK63 • 30/50kW • 18,000 rpm • Tool magazine with 40 stations • Automatic pallet changer • Automatic loading door • Hydraulic unit • Oil separator • Oil mist extraction Fpjdpfx Akszluqlsyen • Air conditioning unit for electrical cabinet • External measuring systems, linear axes • Media feed under pallets • Central lubrication • Door interlock • Coolant unit • Internal cooling with 70 bar high pressure • Coolant and compressed air gun • Chip conveyor • Documentation in German, digital

Year of construction: 2020, condition: ready for operation (used), A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 5) Single-needle high-speed lockstitch machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control: AHE59. 6) Post-bed sewing machine Pfaff 591-900/81-BL. 7) 2x identical swing-arm cutting presses Moneus 1333. 8) 5-thread overlock machine Chee Siang Golden Wheel CSK-2516D-03/S35-3x5. 9) Manually operated riveting and setting machine with mechanical foot operation. 10) Rotary screw compressor Kaeser Aircenter SM 13, year of manufacture: 2020, motor power: 7.5kW, max. operating pressure: 11bar, motor speed: 2955rpm, control: Kaeser SIGMA CONTROL 2. Documentation available. Inspection possible by appointment. Fjdpfszt Skxsx Akyopn

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, OptiCut S 50+ optimizing saw - Feeding system with transverse conveyors and automatic pusher - Outfeed conveyor belt with 2 zones, including ejectors and tables, one of which is foldable - Saw motor: 7.5 kW Fpedpfx Aszkbmdokyen - Boards/planks up to 5 meters long can be fed into the machine. - Maximum cutting cross-section: 270 x 100 mm Additional technical information and a video are available upon request.

Condition: used, Year of construction: 2000, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: MORI SEIKI, controller model: MSX-502III, table width: 500 mm, table length: 500 mm, overall weight: 14,300 kg, With double pallet, Mori Seiki MSX-502III control system. Excluding workholding fixtures and tooling. Fpodpfx Akszxtbpeyjn PICK-UP BY SEPTEMBER 2026.

Condition: good (used), Year of construction: 2014, Lifting capacity: 500 kg Swivelling, horizontal/vertical 6 suction plates Height: 1250 mm Width: 1250 mm Depth: 1150 mm Net weight: 130 kg Condition: good, second-hand Fedpozb E Iujfx Akyjpn

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Fpjdpoxqt Tisfx Akyen

Condition: good (used), Year of construction: 2014, Lifting capacity: 550 kg. Weight: 100 kg. Condition: good, second-hand Fpjdpfx Akex Dtfrsysn

Condition: good (used), Year of construction: 2015, Lifting capacity: 500 kg. Dimensions of the goods: Width: 2300 mm. Height: 1600 mm. Depth: 320 mm. Fpsdpfsxw H E Ssx Akyen Weight: 80 kg. Condition: good, second-hand.

Condition: excellent (used), Year of construction: 2016, operating hours: 7,260 h, functionality: fully functional, Willibald EP5500 Shark waste shredder, manufactured in 2016. In perfect condition and ready for operation, with 7,260 operating hours. Fpjdpozrv Huofx Akyon

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function Fpjdpfxszwhdie Akysn - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: used, Year of construction: 1995, Fanuc MSC 516 2 pallets, 500x500mm BT40 spindle Spindle speed: 12,000 RPM 20-tool changer Fodpfxezgrzks Akyopn Coolant pressure: 20 bar Renishaw

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Fedpfszcuyiox Akyepn Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Fjdpfx Aoy Er Tgokyspn Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, *

Condition: used, functionality: fully functional, machine/vehicle number: JU3413, Year of construction: 2002, operating hours: 12,760 h, load capacity: 7,000 kg, lifting height: 3,920 mm, free lift: 365 mm, load center: 700 mm, fuel type: diesel, construction height: 2,830 mm, motor manufacturer: Perkins, DGUV certified until: 11/2026, fork carriage width: 260 mm, fork length: 1,380 mm, front tire size: SE300-15, rear tire size: SE300-15, empty load weight: 9,900 kg, total height: 2,830 mm, total length: 5,100 mm, total width: 2,350 mm, color: red, Equipment: CE marking, lighting, sideshift, Forklift Jumbo J/SH/14/50; No. JU3413, year of manufacture 2002; tires SE 3.00-15; platform width 1,400 mm; platform height 1,150 mm; overall height – structural height: 2,850 mm; width 2,350 mm, length 5,100 mm, mast height: 2,830 mm, lifting height 3,920 mm, free lift 365 mm, forks: 260 x 50 x 1400 mm; load capacity 7,000 kg / load center 700 mm, engine: Perkins diesel, approx. 12,760 operating hours – may change slightly as the vehicle is still in use; fork positioner, full cabin. Sale without guarantee and without warranty; Vehicle sale ex works – must be picked up by the buyer; Fodpjz D Aacsfx Akyspn Inspection and test drive are possible by appointment.

Condition: used, functionality: fully functional, FESTO DGPL-40-1250-PPV-A-B-KF-GH-SH Linear actuator. Good working condition. Please check out our other listings as well. Fodotwqrwepfx Akyjpn

Condition: good (used), Year of construction: 1983, FGSH 50 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Double-torsion head (new bearings, new gears). Beam to the level with the eyepiece. Fpedpedqp Euefx Akysn Parameters: Table 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Speed ​​range 45-1400 rpm. Main engine power 15 kW. The demand for a power of 23 kW. Dimensions: Length X Width X Height: 3200 X 3475 X 2620 mm. Weight 6500 kg.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Fpedpfx Aoxnizdskyen Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2025, machine/vehicle number: SH-250, functionality: fully functional, pressing force: 250 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 8 mm/s, total length: 3,000 mm, total width: 2,000 mm, total height: 1,700 mm, Equipment: documentation/manual, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal hydraulic ram press is engineered with a range of three different capacities, from 100 to 250 tons. These horizontal hydraulic presses are specifically designed for straightening and bending profiles, bars, and beams. The horizontal configuration enables easy handling of large-size beams and profiles. The latest-generation HS series offers versatile utility, with the possibility to fit a wide variety of tooling. They operate at a hydraulic pressure below 350 BAR to ensure greater durability of the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature an electro-welded "C"-frame structure made exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. Design and calculation are carried out using finite element software, thus maintaining our high standards of robustness, accuracy, and quality. They come equipped with a main anti-rotation push cylinder and a rear support table, both made from high-strength steel and machined with DIN 650 T-slots. Standard equipment includes C45E steel support blocks. Two adjustable side rollers are also included as standard, one on each side. CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with honed sleeve, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder is operated by a lever hydraulic distributor. It is fitted with a removable block to prevent piston damage. Single speed motor-driven hydraulic power unit. ELECTRICAL INSTALLATION AND SAFETY Electrical system includes a motor protection switch and emergency stop. Supplied with a glycerine-filled pressure gauge (tonnage readout) and hydraulic oil. Fully complies with all essential CE safety and health regulations. Supplied with an operation manual. OPTIONAL ACCESSORIES • Basic feed rails from 3,000 mm up to 12,000 mm, height adjustable. • Motorized feed rails from 3,000 mm up to 12,000 mm. • Hydraulic elevation and tilting of feed rails. • 415 mm folding device. PROMECAM clamping system. • Additional single-speed manual pump, allowing both manual and powered operation. • Low-voltage electric foot pedal control. • Precision limit switches with cylinder anti-rotation system and low-voltage electric foot pedal control. • Two-speed hydraulic power unit. • Geometry customized to your requirements. Fpjdpfx Akjwk Hkqsyjn

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Fsdeyq R D Hepfx Akyopn

Condition: used, Year of construction: 2016, Marel labeling machine Fsdexnkh Sepfx Akyopn - Concept 500 - Top labeller More photos and full specifications: /

Condition: excellent (used), Year of construction: 2018, clamping force: 500 kN, Equipment: documentation/manual, Clamping force - 500/650 kN Injection cylinder diameter - 27 mm Theor. Cylinder volume - 50 cm3 Centering circle diameter - 125 mm Min. mold height - 210 mm Fjdpfxozn Uqwj Akyepn Max. mold height - 460 mm Max. opening of the cap - 600 mm Distance between columns (vertical) - 320 mm Distance between columns (horizontal) - 360 mm External dimensions of the clamping plate (w x h) - 500 x 470 mm Number of hydraulic cores - 0 Number of pneumatic circuits - 2 Max. ejector stroke - 70 mm Power consumption - 30 kW Equipment / Options: 1. Power transformer AC400V → AC200V 2. Air ejector – 3 circuits 3. Reject part detection 4. Euromap E67 5. USB interface 6. Parallel mould movement / dosing 7. Parallel mould movement / ejector 8. Pre-injection function 9. Precision dosing function 10. Screw check valve backflow measurement 11. Shut-off nozzle – software 12. Hot runner valve gates – 8 circuits (software) 13. Communication with temperature controllers (software) 14. Intelligent mould protection 15. Intelligent ejector protection 16. Tool kit 17. Fuse kit 18. 21 freely programmable inputs/outputs 19. 2× analogue inputs 0–10 V DC 20. Alarm beacon with audible signal 21. Czech operating manual 22. 1-day operator training at customer site 23. Commissioning 24. Automatic clamping force correction during operation

Condition: used, Big-bag emptying station (0.5 m³, injection blower) – Plastcompactor HV 50/110 (600–700 kg/h, 4 m³ silo with feed screw, agitator, discharge screw, DS drive 110 kW, 2 compacting discs Ø 500 mm with kneading bars and water cooling, Siemens S7) – Post-cutting mill SML 45/100-S3-2 (10 mm screen, 3x1 rotor/2 stator knives, shear cut, spray mist cooling, hydraulic opening, 45 kW) – Fine material separation with a zig-zag sifter and return system – Material discharge with a double big-bag holder MFT 45/350, blower 7.5 kW, cyclone. Fedpoz Aiuyefx Akyopn

Condition: good (used), mileage: 409,000 km, power: 552 kW (750.51 HP), first registration: 01/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2017, Equipment: Bluetooth, central locking, fog lights, onboard computer, = Additional options and accessories = - Air horn - Cabin - Heavy duty engine brake - Leather interior Fpsdpfxjzlr Tds Akysn - PTO - Radio/Cd/Audio system - Refrigerator - Rotating beacon - Sunroof - Toolbox - Visor = Remarks = Volvo FH 16.750 8x4 Palfinger PK 110002-SH G Power Link Plus + JIB PJ 170 EDPS Plus 8x4 drive I-Shift gearbox Euro 6 750 hp Luxury leather interior Beacons Various work lights Various tool boxes Rear extends 150 cm Adjustable turntable Drop plate Tow bar Palfinger PK 110002-SH G Power Link Plus + JIB PJ 170 EDPS Plus Main arm 8x hydraulically extendable JIB 6x hydraulically extendable Winch = More information = Transmission: Automaat, Automatic Front axle 1: Steering Front axle 2: Steering Empty weight: 25.695 kg Carrying capacity: 11.305 kg GVW: 37.000 kg Technical condition: good Visual appearance: good