Used Kia Centre H63 for sale (3,261)

Condition: excellent (used), Year of construction: 2004, Used Kia Model Kia Centre H63 Twin Pallet Horizontal Machining Centre with 60 Station ATC and Fanuc 18M Control. Serial Number KH630216. Year of Manufacture 2004. MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle • Shuttle Type Pallet Changer • Pre-Tensioned Double Anchored Ballscrews • Fanuc 18M Control with 15 Inch Colour Screen • 20 Bar ‘Cool-Jet’ Through Spindle Coolant • Set of BT50 Toolholders • Filtermist FX5002 Mist Filtration • Frontal and Side Operators Platforms TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM 0bwkk Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Hfedpfou A Ut Nex Ag Esn Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper NT #50 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEARED HEADSTOCK FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type BT #50 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415V / 3PH / 50HZ MACHINE Floor Space (L x W) 3,610 X 5,320 MM Height 3,140 MM Weight 14,000 KGS

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,222 h, functionality: fully functional, machine/vehicle number: KH630338, travel distance X-axis: 950 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 760 mm, controller model: Fanuc Series 18i-MB, spindle speed (max.): 4,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Hfjdpfsztpixex Ag Ejn Travel distance X-axis: 950 mm Travel distance Y-axis: 825 mm Travel distance Z-axis: 760 mm Working area max.: Ø 1,120 × 875 mm Distance from table surface to spindle center: 175–935 mm Distance from table center to spindle nose: 0–825 mm Spindle Spindle mounting: NT50 Spindle speed: 4,500 rpm Spindle motor power: 22 kW Gear stages: 2 Cooling: Cooling through the spindle Pallet Pallet size: 630 × 630 mm Maximum pallet load: 1,000 kg Tool changer Tool positions: 40 Maximum tool diameter: Ø 110 mm Tool diameter without neighboring tool: Ø 245 mm Maximum tool length: 600 mm Maximum tool weight: 20 kg Tool change time tool-to-tool: 6 s MACHINE DETAILS Control: Fanuc Series 18i-MB Operating hours (as of 05/12/2026) Power-on hours: 71,457 h Operating hours: 28,051 h Spindle running time: 13,222 h Dimensions & Weight Dimensions (L x W x H): 3,610 x 5,320 x 3,140 mm Machine weight: 14,000 kg Weight of dual pallet changer: 2,000 kg Total weight: 16,000 kg EQUIPMENT Dual pallet changer Spindle cooling Oil cleaner Chip conveyor Cooljet Systems oil cooler Tools in the machine Tools on 2 tool carts Operating manuals Parameter backup on USB stick Note: The machine is in operation until disassembly. Before collection, it will be disconnected from the power supply, and the oil will be drained. The backup batteries were replaced on 06/01/2023. In addition, an updated parameter backup will be created before the power is shut off.

Condition: used, Year of construction: 2005, functionality: fully functional, KIATURN 15N SLANT BED CNC LATHE 170 MM HYD 3 JAW CHUCK MAX TURNING DIA 250 MM BAR CAPACITY 38.1 12 STATION TURRET TAILSTOCK FANUC CONTROL TOOL SETTER PARTS CATCHER BARFEED Hsdpfxoz Rnwbo Ag Esfn

Condition: excellent (used), Year of construction: 2006, turning diameter: 250 mm, spindle bore: 90 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 320 mm, spindle motor power: 11 W, type of input current: three-phase, overall weight: 4,600 kg, Equipment: documentation/manual, HYUNDAI-KIA SKT 21 VM CNC VERTICAL LATHE Hedszzvmmjpfx Ag Eefn CNC vertical turning center with an inverted spindle, C-axis, and driven tools. Technical data: Manufacturer: Hyundai-Kia Model: SKT 21 VM Machine type: CNC vertical lathe / vertical turning center CNC control: FANUC Max. turning diameter: approx. 250 mm Max. workpiece diameter: approx. 350 mm Chuck size: 8" Spindle nose: ASA 6 Spindle speed: up to 5,000 rpm Spindle motor power: 11 kW Spindle bore: approx. 90 mm Tool turret: 12 tool stations VDI 40 tooling system Driven tools C-axis Axis travel: X-axis travel: approx. 1,255 mm Z-axis travel: approx. 320 mm Rapid traverse: approx. 30 m/min Machine equipped with: C-axis driven tools 12-position tool turret hydraulic chuck coolant system chip conveyor FANUC CNC control

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,010 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Oi-MC, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 510 mm Hsdpfxoz Ebb Us Ag Eofn Table length: 1,200 mm Table width: 510 mm Orientation: Horizontal Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Tool positions: 24 MACHINE DETAILS Control: CNC Control system: Fanuc Oi-MC Number of axes: 3 Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,150 x 2,300 mm Net weight: 6,000 kg Shipping packages: 3 Operating hours: 3,010 h EQUIPMENT Spindle cooling Documentation CE marking External cooling Tool magazine Chip conveyor Tools included

Condition: used, mileage: 87,254 km, power: 130 kW (176.75 HP), fuel type: gasoline, gearing type: automatic, first registration: 01/2022, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please contact us by phone or email to arrange a viewing appointment. The vehicles are not always directly available on our premises. Special equipment: Inductive charging cradle for smartphone, metallic paint Hfsdjy U A Iaspfx Ag Ejn Additional equipment: 3rd brake light, airbag on passenger side can be deactivated, airbag on driver/passenger side, active brake light (ESS), audio navigation system KIA (8 inches), exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors electrically adjustable, both, exterior mirrors in vehicle color, turn signal integrated into exterior mirror, on-board computer, brake assistant, chrome trim around side windows, DAB tuner (digital radio reception), roof rails, roof spoiler, parking assistance system rear, automatic headlight activation, driving assistance system: active lane keeping assistant (LKAS, Lane Keep Assist System), driving assistance system: downhill speed limiter, driving assistance system: hill-start assist control, driving assistance system: drive mode selection, driving assistance system: high beam assistant, driving assistance system: driver attention warning system (DAW), driving assistance system: traffic sign recognition, power windows front + rear, hands-free system Bluetooth, floor mats, washer fluid level indicator, counter-steering support (Vehicle Stability Management, VSM), transmission 7-speed - dual-clutch transmission DCT, cup holders rear, seatbelt pretensioners with force limiter, heated rear window, rear window wiper, Isofix mounts for child seat, body: 5-door, head airbag system front and rear, luggage compartment cover, lumbar support seat front left, steering column (steering wheel) adjustable in height/length, light alloy rims, air vents in the rear center, center armrest rear, mobile online services UVO Connect / Kia Connect, model refinement, engine 1.6 Ltr. - 130 kW TGDI CAT, multifunction steering wheel, gasoline particulate filter (OPF), wheelbase 2670 mm, tire repair kit, tire pressure monitoring system, rear view camera, rear seat back split/folding, low emission according to emission standard Euro 6d-TEMP, gear knob leather, gearshift indicator, side airbags, front seat belts height adjustable, front seat left height adjustable, seat cover / upholstery: fabric, front seat heating, sun visors with mirror (illuminated), socket (12V connection) in center console, bumpers in vehicle color, exterior door handles chrome, front underride protection, USB connection + AUX-IN connection , seats: top sports seats front, front seat heating The vehicle is located in our external storage facility, so please contact us to arrange a viewing. Thank you very much! Subject to price changes, typing errors and omissions, as well as prior sale.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC vertical glass processing centre with waterjet Working direction: from left to right Max. glass size: 6000 x 3300 mm Min. glass size: 600 x 200 mm Glass thickness: 3 - 25 mm Hfedpfjz Syvxex Ag Een Max. grinding speed: 25 m/min Line consists of: - Vertical CNC glass working centre SYSTRON proHD 6033 (year: 2016), - High-pressure waterjet pump THYSSENKRUPP HPS 4037, - Vertical glass washing machine LISEC VHW-33/V8 (year: 2011). Types of processes: - Grinding (inner and outer contours), - Polishing (inner and outer contours), - Drilling/counter-sinking/milling (by waterjet), More technical information can be found attached as Tech. data file Very good and clean condition Good working order, still in production As is Available in December, 2026

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,688 h, functionality: fully functional, machine/vehicle number: G3138-0826, turning diameter over cross slide: 375 mm, turning diameter: 590 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 750 mm, controller model: Fanuc 21i-T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle speed max.: 3,000 rpm Turning diameter over bed: 590 mm Turning diameter over slide: 375 mm Distance between centers: 750 mm Spindle bore: 78 mm Travel in X-axis: 220 mm Travel in Z-axis: 750 mm MACHINE DETAILS Hjdpezza Uusfx Ag Esfn Control model: Fanuc 21i-T Power: 22 kW Operating hours: 1,688 h Shipping weight: 6,100 kg EQUIPMENT Three-jaw chuck Chip conveyor Turret CE marking

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: FANUC, controller model: 21‑i TB, This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of axes: 4 (x, z, c, b) /x axis travel: 221 mm /z axis travel: 549 mm • Max. Machining diameter: Ø 254 mm/ max. Machining length: 531 mm • Tool magazine: 12 positions Hedpfx Aeyaln Eeg Eefn • Equipment: chip conveyor /bar feeder: top automazioni mod. Magic

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1160235, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Hsdezz Ndrepfx Ag Eofn Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg   MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 HSCI Speed : 10000 rpm Movement X/Y/Z : 1050/530/630 mm Tool holder : SK40 General: Tool magazine:24 stations Rapid traverse X/Y/Z:24 m/min Machine weight:7,800 kg Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK40 Fluid delivery:Blow air through the spindle + cooling lubricant through the spindle (IKZ) Work table: Work surface:1,150 x 560 mm Table load capacity (max.):700 kg Travel ranges X/Y/Z:1,050 x 530 x 630 mm Features/Accessories: Hfedez R Icwspfx Ag Esn Chip Management:Chip Conveyor Cooling Management:IKZ System Setup Mode:Electronic Handwheel Probe:Tool Probe (Hexagon)

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Hfjdpexdxhrsfx Ag Ejn Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM Hfsdpfjp T Ulzsx Ag Eon SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: VT 2573, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Hodpfx Agez Im Nis Eofn Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800Kg Machine in Metric execution Machine Equipped with Acu-Rite 2 Axis Digital Readout System 3 Jaw chuck Quick change toolpost 5 Position turret Bedstop Single Bedstop Saddle guard Lighting Coolant system Chuck guard Rear splashguard

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: Sinumerik ONE, _____ Description: Year of manuf. : 2024 Control : Siemens Sinumerik ONE Speed : 8000 rpm Movement X/Y/Z : 1000/1000/1000 mm Tool holder : HSK-A100 Spindle: Technology:Gearbox Spindle Speed:8.000 rpm Power (max.):60 kW Torque (max.):1.146 Nm Taper:HSK-A100 NC-Roundtable: B-Axis:0,001° Palletsize:630 x 630 mm In general: Toolmagazine:425 stations Rapid travers in X/Y/Z:50 m/min Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbelt-filter and high-pressure, 70bar Hfsdpfx Agsz N Rbgs Ejn Workpiecemeasurement:Touchprobe, Renishaw RMP60 Toolbreakagecontrol:Taktil Softwareoption:Process-integrated tool monitoring Automation I:Palletchanger, 2 stations Automation II:Interface FASTEMS MLS Oilmistseparation:Interface mechanical prepared Further Accessory:Rinsing pistol

Condition: good (used), Year of construction: 1998, I sell the 3-axis CNC working centre Biesse Rover 13S with beam table, year 1998. Configuration: 3-axis main spindle HSD 1 grooving saw X-direction Hfedpsz Ii Axjfx Ag Esn Drilling head 10+4+2 spindles Useful working area 1540x1050mm. 1 working field, 2 clamping areas Total power 10kW Pump Becker Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately.

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine, it is connected and can be tested. A video of the machine can be sent via WhatsApp. Diameter over the bed: 1250 mm Diameter over the carriage: 900 mm Turning length: 6000 mm Hfodpjxwqk Eofx Ag Een Workpiece weight between centers: 14,000 kg

Condition: like new (used), Year of construction: 2022, operating hours: 2,085 h, turning diameter: 240 mm, spindle motor power: 11,000 W, spindle speed (min.): 3,200 rpm, spindle bore: 90 mm, travel distance X-axis: 142 mm, travel distance Z-axis: 165 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 2,500 rpm, type of input current: three-phase, total height: 2,700 mm, total length: 3,590 mm, total width: 2,610 mm, overall weight: 5,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, Front set Double SPindel Turning Center. with 2 spindle, 2 rew.head, with DRIVEN tools, and C axis, 2 linear robots. Machine is almost new, we used only 2000 hrs. This is the FULL-FULL version of the machine, with two side feeders. collet + 3 jaw chucks. Chain conveyor. FANUC 0ITD control. machine bought new from Takisawa dealer in Hungary. ( SZIMKER ZRT ) RAKU-RAKU MONITOR. Hfjdperzq N Usfx Ag Eon

Condition: used, Year of construction: 2012, The SAC F4TL window manufacturing centre is designed to meet the requirements of modern window production. It enables highly efficient, high-quality manufacturing with minimal setup time and without the need for tool changes. After machining, the workpiece is automatically returned to the operator. SAC F4TL CNC Window Manufacturing Centre – Machining Units Tenoning Side 1. Tenoning carriage 2. End trimming unit 3. Tenoning spindle Profiling Side 4. First profiling spindle Hodpfx Aozl D Dnog Esfn 5. Second profiling spindle 6. Glazing bead notching unit 7. Hardware slot milling unit (optional) Feed System Tenoning Side 1. Tenoning carriage • Machining speed: 3–10 m/min • Return speed: 45 m/min • Table size: 290–955 mm • Motor power: 1.1 kW • Fence tilting angle: ±60° 2. End trimming unit • Saw blade diameter: 400 mm • Bore diameter: 30 mm • Motor power: 3 kW 3. Tenoning spindle • Vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 620 mm • Vertical travel: 565 mm • Motor power: 7.5 kW • Maximum tool diameter: 350 mm Profiling Side 4. First Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: left/right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 5. Second Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 6. Glazing Bead Notching Unit • Saw blade diameter: 200 mm • Saw blade bore: 30 mm • Horizontal spindle adjustment: 60 mm • Motor power: 2.2 kW Optional Unit 7. Hardware Slot Milling Unit • Motor power: 3 kW • Spindle diameter: 30 mm • Spindle length: 100 mm • Horizontal spindle adjustment: 60 mm • Vertical spindle adjustment: 60 mm • CNC-controlled with 2 vertical positions (maximum difference: 60 mm) • Maximum tool diameter: 190 mm Feed System • Feed speed: 4–20 m/min • Pneumatic workpiece clamping CNC Control and Software • 17" colour LCD monitor • 102-key alphanumeric keyboard • Operating system: Windows XP Professional Options • Hardware slot milling unit • Motorized NC-controlled stop • Return roller conveyor • Leitz IV 69 tool set • Leitz IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2005, Geminis GHT4 - 720 x 2000 CNC Centre Lathe with Fanuc Series 21iTB CNC Control, Distance between Centres 2000mm, Swing Over Bed 720mm, Swing Over Cross Slide 470mm, Spindle Bore Diameter 104mm, Spindle Speeds to 1600rpm. Max Workspiece Weight Between Centres 2560kg, Tailstock with 6MT, Main Motor Power 20.5kw, Fixed Steady, Swarf Conveyor, Various Tool Post Holdwers. S/No. 12029 (2005) Machine Size 2600mm x 2385mm x 1765mm, Weight 4100kg Hjdjz Rnxljpfx Ag Eofn Location: This lot is located in Scotland, UK. A charge of £800 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Year of construction: 2004, condition: used, Emmegi Comet Isola, 4 Axis CNC Vertical Machining Centre for Milling, Drilling and Tapping Aluminium with Emmegi CNC Control (Isac Cam Editor), Bed Length 6800mm, X Axis 5500mm, Y Axis 525mm, Z Axis 380mm, Pneumatic Vices and Auto Vice Positioning. S/No. M271748 (2004) Machine Weight 5300kg Hfedpfx Aez Rnwzsg Ejn Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Hjdjv Iq Ezepfx Ag Eofn Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger Hjdpewx I N Dsfx Ag Esfn

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Approx. weight 8900kg   MACHINE EQUIPPED WITH: - Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Hodpfx Agezr Nf Ds Esfn Renishaw Wireless Intuitive Probing System High Speed Machining Lighting Enclosed Guarding

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5921, overall weight: 12,000 kg, input current: 41 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, 5-axis CNC machining center 2 retractable tables, 1700x1425 mm each Linear axes X-4300, Y-2300, Z-1200 mm Rotary axes B +/- 120, C +/- 240 Tool magazines, 2 x 6 positions OSAI control system Bertronic remote control with teach-in functions 7.5 kW electrospindle, HSK-63F 2 vacuum pumps, 100 m3/hour, two clamping zones (can be combined into one large zone) Exhaust hoods for chip removal around the tables in the work area RENISHAW TS27 probe for tool length measurement and rotary axis calibration Free-standing electrical control cabinet Complete enclosure of the machine to protect against dust and noise CE marking Hfsdpfx Aoz H Slmjg Eon The machine is installed and connected – it can be tested.