Used Kairos Engineering Srl Esp E Wesp for sale (77,312)

Year of construction: 2022, condition: new, Electrostatic filters are considered the most sophisticated technology, currently available, for the collection of solid and liquid particles existing in an exaust air flow. The electrostatic uptake allows the separation of any particle from the air, regardless of its size. In fact, the agglomeration of very fine particles is possible with efficiencies up to 99% on atmospheric dust according to the EN 779 method.The use of electrostatic filters therefore allows to obtain air completely free of dust , smoke, spores, bacteria, pollen ecc . The main advantages deriving from the use of electrostatic filters are: • High filtration efficiency • Low pressure drops • Low operating cost • Limited maintenance interventions Ljdpfxoh Aku To Af Sert • High operating reliability

Year of construction: 2018, condition: like new (used), Deflector spray scrubbers are an air pollution control technology. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas flow to atomize liquid as it passes over them. Lredoinbi Sspfx Af Sjt

Year of construction: 2022, condition: new, machine/vehicle number: XXXX, Baffle spray scrubbers are a technology for air pollution control. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas stream to atomize some liquid as it passes over them. Lodpfx Aeh Akn Uof Sort

Year of construction: 2022, condition: new, Kairos Engineering's energy recovery system is a technology that recovers the heat contained in the industrial hot wastewater, to transfer it to other water to be put back into the production process. The transfer takes place by means of shell and tube heat exchangers in which the two fluids, which never meet directly in order not to undergo contamination, they are sent against the current, that is, one against the other. Indicative savings of 30%. Lrodoh Akv Hepfx Af Sjt

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station Lrodezw Ukcepfx Af Sjt 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Included in the adhesive application cell: Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Protective fences, etc. Lrjdpfx Ajzz Agmsf Sjt Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Condition: used, Year of construction: 2015, input voltage: 230 V, Equipment: CE marking, installation consisting of controlled compressors to regulate the pressure and expansion tanks with bellows C10.1-6 Connect 0.6kW 0/5bar C15.1-10 Connect 1.2 kW 0/10bar DU 500.10 - 500L 0/10bar CG 1000.10 - 1000L 0/10bar CG 2000.6 - 2000L 6/8.6bar CG 2000.6 E - 2000L 6/8.6bar Lrsdpjzcdyfsfx Af Sjt

Year of construction: 2007, condition: used, functionality: unexamined, machine/vehicle number: 151 000/69, We are offering this used Weil Engineering longitudinal seam welding machine, model Flexmaster 400 WIG, manufactured in 2007. Lodpfxozxqb He Af Ssrt If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Lrodpfx Asy Hlkbjf Sot Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Ledpoy Hlvwefx Af Sjrt Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: used, Year of construction: 2021, A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency: 50Hz, control voltage: 24V DC, upstream fuse: 16A. Approx. 30000 assemblies were foam-applied using the system. The system was shut down in 2024 according to the manufacturers instructions. Documentation available. An on-site inspection is possible. Lsdjzvy Ecjpfx Af Sjrt

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder Ljdpfxoyzr Nmj Af Sert • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Year of construction: 2018, condition: excellent (used), Type: Low Voltage Distribution Board / MCCB Panel Installed equipment 1 × Schneider Electric Compact NSX400NA main incomer Main incomer rating: 400 A 3-pole configuration Ui: 800 V Lredpfx Aozlii Njf Set Uimp: 8 kV 4 × Schneider Electric Compact NSX160F outgoing MCCBs 4 × Schneider TM125D thermal-magnetic trip units Outgoing MCCB rating: 125 A each Breaking capacity: approximately 36 kA at 415 V 1 × additional Schneider / Merlin Gerin outgoing device rated 125 A 1 × additional Schneider / Merlin Gerin outgoing device rated 63 A Three-phase L1/L2/L3 distribution Internal busbar system Labelled outgoing circuits Spare internal capacity / blanked positions Heavy-duty floor-standing steel enclosure Lockable double front doors The board appears complete and is in good visual condition. Operational testing and final electrical inspection should be carried out by the purchaser before installation. Available for inspection. Additional photographs and technical information can be provided.

Year of construction: 2019, condition: used, machine/vehicle number: 23467, Performance: 25/35 kVA, control system: SIEMENS Simatic HMI, consisting of: 1 swarf transport car tilting device from ELIAS ENGINEERING, load capacity: 500 kg, 1 shredder ELIAS ENGINEERING FS 600, 1 pre-cleaning unit ELIAS ENGINEERING KSS-RA, 1 post-cleaning unit ELIAS ENGINEERING 23468-4, 1 storage tank ELIAS ENGINEERING 23468-6, 1 swarf distribution device ELIAS ENGINEERING TTS 600, load capacity: 150 kg, with rail system, control system, and steel enclosure. Lodozqy R Uepfx Af Sjrt

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. Lrsdpfx Ajx Dbkcjf Sjt This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: excellent (used), Year of construction: 1999, LNG Methan Gas Cryogenic Semi-trailer M1 Engineering Lodpfx Aswp Iq Asf Sjrt Hersteller: M1 Engineering Baujahr: 1999 Volume: 49 m3 Working pressure: 8 bar. Tare 15435 kg Pump Flowmetter We also have other tankers, tanks, vessels for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane We will be glad to answer your questions via Phone and E-mail

Year of construction: 2022, condition: new, The Venturi Scrubber is a device that generally consists of a centrifugal part capable of separating the solid parts from the liquids and of a Venturi column that narrows in the middle section to vary the pressure and therefore allow the polluting solid particles to fall through the fumes. This type of Scrubber is used for the removal of dust and pollution present in corrosive and dangerous industrial gases. Venturi Scrubbers are used in the abatement of particulates that come from coal, oil or wood boilers, the textile industry but also for emissions from the chemical industries, wood industries, paper mills, etc. Ljdpfjh Atp Asx Af Ssrt

Year of construction: 2016, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH 360 Year: 2016 Width: 36 cm Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Conveyor: Entry conveyor belt – Motor: 0.25 kW – three-phase 400V – Product guidance via stainless steel comb Conveyor: Outfeed belt – Motor: 0.37 kW – three-phase 400V – Integrated air blow-off ramp Cutting unit – Cutting wheel Ø350 mm – 3 blade holders (45° and 90°) – 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – Option to add more – Rotation speed: 72 rpm – Motor: 0.37 kW – three-phase 400V – Guide with stainless steel bearings – Cutting kit available: 90° and 45° Product orientation kit: 1 symmetrical set, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function – Non-motorised stainless steel roller, Ø140 x 350 mm – Gap adjustment: manual – Adjustable anti-clogging scraper Lrjdpfx Aoy Hdqajf Sst Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: ready for operation (used), We offer this ready for use B.I.P. Engineering BIPEL 150 T Rubber Vulcanising Press. It is currently installed so can be seen running in situation. We have attached a data sheet which shows the key Dimensions. Type: 150 FAOL Serial Number: 8620 Voltage: 440 V Phase: 3 Frequency: 50 Hz Apparent power: 100 kVA Price in GBP = £16,000 Lrjdpez D Igbsfx Af Sot If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2018, 1 x Zumex Food Engineering juice extraction and flitration system with elevator and squeezing kits. Manufactured completely in stainless steel. Technical specification ⚙️: ✅ Manufacturer - Zumex Food Engineering Lrjdpst Uircsfx Af Sot ✅ Model - Z450. ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification ⚙️: ✅ Sizes 9-10-11: Heat unit - Kit 9, Oranges/minute - 150.35, Output capacity - 902.4 kg/h, Litres/minute - 6.01 L/min, Litres/hour - 360.84 L/hr. ✅ Sizes 5-6-7-8: Heat unit - Kit 8, Oranges/minute - 133.68, Output capacity - 1145.4 kg/h, Litres/minute - 7.64 L/min, Litres/hour - 458.22 L/hr. ✅ Sizes 2-3-4: Heat unit - Kit 7, Oranges/minute - 116.94, Output capacity - 2338.8 kg/h, Litres/minute - 15.59 L/min, Litres/hour - 935.53 L/hr. PLEASE NOTE - Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5 x 1 x 2.2m CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: excellent (used), Year of construction: 2009, operating hours: 3,350 h, functionality: fully functional, total length: 21,000 mm, total width: 1,200 mm, total height: 3,250 mm, type of input current: three-phase, input voltage: 380 V, feed rate X-axis: 12 m/min, working width: 270 mm, We are selling our fully automated packaging line by CSP Engineering due to production expansion and renewal of our machinery park. The packaging line is engineered for maximum output, precision and reliability in industrial production environments. The line is currently functional in production. Main features - Automatic counting system - Automatic label application with package quantity indication - Integrated folder insert system inside each package - Automatic wrapping and strapping system - Integrated measuring system - High production efficiency: up to 150 m2 per hour - Suitable for long profiles Technical specifications - Maximum plank length: 3100mm - Maximum plank width: 270mm - Widest point of the complete line: 3100mm Machine configuration and power requirements 1. Strapex system - 5.6 AMP 2. Parscan System - 10 AMP 3. Packaging Machine - 6 AMP Lrjdpfx Afjy Rffte Set 4. Oven - 40 AMP 5. Destacker - 25 AMP The line can be inspected in operation and is immediately available upon agreement. Keywords: Labeling, Destacking, Stacking, Strapping, Packaging, Packing, Parquet, Wood, Wrapping, Folder, Shrinking, Shrinkoven

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm Lrsdpfx Afozk N S Uj Sst - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Manufacturer - Canellitech Srl Lodeulpu Sspfx Af Sert Model - 8-1 (8 x filling heads). Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: used, functionality: unexamined, Year of construction: 2001, machine/vehicle number: 3533, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, For sale: a custom-made cutting and marking line (using disc/circular saw) for round and square tubes, manufactured in 2001 by Simec Srl (Schio, Vicenza, Italy). The system consists of a Simec bar feeder "Caricatore BM" (serial number 3587) that feeds the main Simec unit "MEC 120 MI" (serial number 3583), with a disc cutting station identified with the FAT logo. Lredpezvc Utsfx Af Sst The line includes a workbench with guides and measuring scales, a collection box for cut pieces, and a roller table for material transport. The structure is mounted on legs and features its own control panel (Siemens Simatic OP3 interface and Rovan Elettronica counter/display), manual control buttons, a mode selector, pressure gauges, and a three-phase electrical connection. Condition: it was in operation until approximately 1 year ago; the current condition has not been recently verified or tested. Inspection/testing by the buyer is recommended before purchase.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, load capacity: 40,000 kg, lifting height: 800 mm, tire condition: 100 %, Special design / unique item: mobile crane portal for loading and unloading machines and vehicles from low-bed trailers, or as a boat lift in a dry dock, 3-meter clear width, variable hook height, 800mm self-travel, expandable lifting stroke by 1200mm with lifting systems of 4 x 6.5 tons, statically loadable up to 40 tons, adjustable crossbeam, mobile load capacity of 10 tons, electro-hydraulically driven steering chassis, suitable for use on level, smooth concrete surfaces. Lredoz Ekm Hjpfx Af Sjt