Used Kündig Enorm 1300-2 Wide-Belt Sander for sale (84,502)

Condition: used, Kündig ENORM 1300-2 wide-belt sander for the precise calibration and fine sanding of solid wood, veneer and wood-based materials. This robust industrial model, featuring two sanding units and a cleaning brush, delivers high material removal rates and precise surface quality in the furniture and interior fit-out sectors. Ideal for craft and industrial businesses with high quality standards, including a set of sanding belts. Cedpfx Aszryxnoilorh Technical data: - Working width: approx. 1,300 mm - Grinding units: 2 - Clearance height: max. approx. 150 mm - Motor power: 18.5 & 15 kW

Condition: used, Year of construction: 2002, Used machine Equipment: Csdpfez Iupwex Ailerh - Constant working height due to a motor-driven, height-adjustable upper section - 1st sanding unit with a rubberized and grooved contact roller, contact roller with 180 mm diameter, 75ø shore, contact roller level adjustable in steps - 2nd sanding unit with a height-adjustable air sanding pad - Belt drive motor 15 kW, 380 volts, with soft start for low power consumption during startup - Parallel, spring-mounted, ground infeed pressure roller - Pneumatic belt tensioning with length compensation - Air-controlled sanding belt oscillation - Immediate stop of the sanding belt drive with disc brake in case of belt breakage, belt slippage, or pressure drop - Automatic star-delta contactor - Thickness indicator for workpiece thickness - Workpiece feed 0.75 kW with a fabric-reinforced rubber conveyor belt - Automatic centering of the feed belt - Rubberized belt drive roller - Ammeter for monitoring the chip removal rate - Max. workpiece thickness 160 mm - Sanding belt dimensions 1120 x 2000 mm - CE version/dust-tested - Infeed roller table - Outfeed roller table - Feed speed continuously adjustable from 3-15 m/min via a frequency converter, control from the front at the operator side - Automatic workpiece thickness adjustment across the entire working width, including over-thickness protection - Adjustment or pre-selection of the chip removal rate via a dial gauge - ENORM-matic quick adjustment with feed release - Operating hour counter in the electrical cabinet Availability: short-term Location: Flörsheim

Condition: excellent (used), Catalog number: 8047 TECHNICAL DATA - max. width of the workpiece: 1100mm Crsdszx Swpopfx Ailoh - max. height of the workpiece: 160mm – Top: - 2 sliding metal rollers - unit: grooved rubber roller + shoe + metal roller - sliding rubber roller – Bottom: - sliding rubber roller - conveyor belt - sliding rubber roller - pneumatic belt oscillation - stepless feed speed adjustment - electric machine body lifting - pneumatic brake - total power: 10.5kW - operating pressure: 6-8 bar - diameter of the dust extraction nozzle: 190mm - dimensions (L/W/H): 1470x1540x2000mm – weight: 1260kg ADVANTAGES - Made in Germany - Single-head grinder with a 1100mm wide shoe - Unpainted – used grinder, very good condition Net price: 19900 PLN Net price: 4740 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, grinding width: 650 mm, Equipment: type plate available, Kündig Botop, sanding unit on top roller, pneumatic shoe, sanding unit on bottom roller, pneumatic shoe. Machine has been completely overhauled, new carpet, new rollers. Cedsvmt D Rjpfx Ailerh

Condition: excellent (used), CATALOGUE NUMBER: 5799 TECHNICAL DATA - Maximum width of workpiece: 230 mm - Maximum height of workpiece: 140 mm - Minimum length of workpiece: 300 mm - 2 grinding units: - Upper and lower + platens * Upper: - 2 sliding, metallic pressure rollers - Pressure - Grinding unit: 2 metallic rollers + platen - Sliding pressure roller - Traction belt * Lower: - Traction belt - 2 sliding, smooth metallic rollers - Pressure - Grinding unit: 2 metallic rollers + platen - 3 sliding, smooth metallic rollers - Electrically adjustable grinding height - Oscillation of grinding belts - Pneumatic cleaning of belts - Smooth speed adjustment via inverter: 3-15 m/min - Feed motors: 2 x 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air consumption: 6-8 bar - Diameter of dust extraction nozzles: 4 x 100 mm - Overall dimensions (L/W/H): 2340x1420x1920 mm - Weight: 1480 kg – For short workpieces (belts overlap) Codpfx Aezty Nvoilorh – German made – Very good condition – Not painted – Used grinder Net price: 18900 PLN Net price: 4400 EUR Net price calculated at an exchange rate of 4.3 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: used, For sale: ENORM PRIMO – TOP CONSTANT THICKNESS MACHINE / automatic head positioning Wide-belt calibrating and fine-finishing machine Combined unit: contact roller and pneumatic sanding pad Enormatic Digital thickness display for workpiece thickness Codpfoz D S Rdox Ailerh Belt drive motor power approx. 9 kW Contact roller pressure adjustable in infinitely variable steps according to grit scale Infeed and outfeed table with roller support Working width 1100 mm Feed rate 2.5 - 15 m/min Machine is WORKSHOP OVERHAULED and in VERY GOOD CONDITION Machine comes from a craft business Available from stock in Lieboch

Condition: used, functionality: fully functional, machine/vehicle number: SA002337, Technical data: Working width: 1135 mm 1 Combination unit Shaft diameter: 210 mm Max height of processed material: 160 mm Sanding belt dimensions: 1135x2200 mm Electric lifting Digital display Crjdpfx Aisyn N Dgjljh Safety switch Main motor power: 11 kW Voltage: 380V Operating pressure 8 bar Adjustable feed speed Overall dimensions: Depth: 1500 mm Width: 1800 mm Height: 2300 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A80722MM2, grinding width: 1,350 mm, power: 31 kW (42.15 HP), height adjustment type: electric, Automatic leveling wide belt sander suitable for fine sanding of solid wood. This sander belongs to the top range of automatic wide belt sanders and stands out, in particular, for its small machine size, perfect sanding quality, ease of operation, and high reliability. It was used for final sanding of solid parquet. 2 main units: soft sanding cylinders, 1350 mm Additional units: Scotch-Brite brush, cleaning brush, cleaning air blowers Total maximum power consumption: 31 kW Sanding width: 1350 mm Max. workpiece height: 160 mm Constant working height of the machine – suitable for integration into a production line Motorized adjustment of working thickness with LCD display Continuously adjustable feed rate of the conveyor belt Continuously adjustable speed of both working units Pneumatic blowers for the working units Ammeter for monitoring motor load Remote shutdown of units from the control panel Stop with 4 positions for compensating for belt grit Perforated conveyor belt with the option of vacuuming up parts Roller extension of the table at the input and output Pneumatic oscillation, electronically controlled CE safety standard Crodpfx Ajy Idxyoiljh Weight: 3800 kg Year of manufacture: 2008 Damage to the first sanding cylinder – see photo Negotiable price: 25,000 EUR (excluding VAT) The machine is fully functional and sold in its current condition. In stock in Telnice, near Brno – Czech Republic Testing, demonstration, and operator training are included.

Condition: used, Year of construction: 2007, Wide-belt sanding machine Manufacturer: Kündig Type: Premium-2 1100-RE Year of manufacture: 2007 Technical data: Working width: 1100 mm Working height (max.): 200 mm Sanding roller Sanding shoe for finish sanding Belt cleaning Vacuum 400 V, 50 Hz, 24 VDC 57.5 amps 28.4 kW Includes loading Codpszuza Sefx Ailerh Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, grinding height: 160 mm, 1. calibration roller unit 2. electronic shoe unit 3. electronic shoe unit Codpewhqmwjfx Ailorh stable industrial machine for calibration, fine sanding and lacquer sanding

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of workpiece 970 mm Credpfx Aiezxg H Ssljh - max. height of workpiece 160 mm - 2 units - 1) grooved rubber roller - 2) two metal rollers + shoe - power of unit I and II: 11 kW - total power: 12 kW - brake * from above: - metal roller, sliding - pressure roller - unit - metal roller, sliding - pressure roller - unit - metal roller, sliding * from below: - rubber roller, sliding - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 types of feed speed - feed motor approx. 0.75 kW - working pressure 8-10 bar - diameter of dust extraction nozzle 2x160 mm - overall dimensions (L/W/H) 1600x1500x2000 mm - weight 1370 kg ADVANTAGES – Made in Italy – 2 units – Unpainted – Used grinder, very good condition Net price: 21900 PLN Net price: 5090 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2020, For sale: HOUFEK BASSET PBH250 belt grinding machine, manufactured in 2020 in the Czech Republic. This machine features a robust industrial design with a large 800 × 2500 mm work table, ideal for grinding, smoothing, and finishing surfaces of larger parts. The 150 × 7000 mm long grinding belt and adjustable work table allow for convenient processing of both individual parts and larger workpieces. The grinding head can be tilted up to 90°, making the machine suitable for grinding edges of parts as well. houfek.com Codpfx Aiez Izt Aolerh Key information: Manufacturer: HOUFEK a.s. Model: BASSET PBH250 Year of manufacture: 2020 Made in: Czech Republic Serial No.: PB-3604 Technical specifications: Motor power: 3 kW Motor speed: 1400 rpm Grinding belt speed: 17 m/s Grinding belt dimensions: 150 × 7000 mm Work table dimensions: 800 × 2500 mm Vertical work table travel: 540 mm Horizontal work table travel: 700 mm Max. workpiece weight: 100 kg Grinding head tilt: up to 90° Dust extraction connections: 2 × Ø100 mm Power supply: 3/N/PE 400 V / 50 Hz Nominal current: 7 A Protection class: IP54 Machine weight: 556 kg Key advantages: Large 800 × 2500 mm adjustable work table Long 150 × 7000 mm grinding belt 17 m/s grinding belt speed 540 mm vertical and 700 mm horizontal work table travel Grinding head tiltable up to 90° Robust industrial design Dust extraction from both sides of the machine CE marking If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2005.09 261, overall weight: 12,500 kg, power: 180 kW (244.73 HP), input frequency: 50 Hz, input current: 350 A, input voltage: 400 V, Working machine. Planned dismantlig 2026-12 Crodpfezu I Ehsx Ailsh no manual or documents.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finish sanding Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Bookbinding machine with combined unit and electronic articulated pressure bar, edge segments can be switched on and off Segment width of the pressure bar 35mm Contact roller can be pneumatically adjusted, low wear due to corrugated steel roller Grain compensation Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Constant working height 900mm by adjusting the upper part of the machine, thus also integrable into sanding lines Feed belt still has good grip and is in very good condition Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Csdpfxezqvmro Ailjrh Common sanding belt dimension 1360 x 1900mm 3 rubberized pressure rollers Infeed roller table and foldable outlet table Preparation for vacuum blower. The belt is perforated and plugs for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE marking Operating manual without the illustrated connection cable Original paint, only touched up in places Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Year of construction: 1990, functionality: fully functional, STEMAC Wide belt sander for lacquer sanding MICRON 1 R Manufacturer Stemac Italy year of construction 1990 S/N S90.503 working width 1350mm Cjdpfxjtyyl Ss Ailjrh 1 lacquer sanding unit 20 kW, infinitely variable speed Sanding belt length 2620mm with cleaning brush Infinitely variable feed Sanding belt blow-off device Electronic work table adjustment 400 V , 50 Hz Weight approx. 4300 kg with some additional sandpaper

Condition: used, Year of construction: 1999, total width: 1,800 mm, total height: 2,320 mm, total length: 1,700 mm, Colour: White Empty weight: 2.500 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 99125681 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 175 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 1750 - - Roller material: Rubber - - Motor power [kW]: 18.5 - Max. working width [mm]: 1100 - Min. working height [mm]: 30 - Max. working height [mm]: 183 - Infeed table length [mm]: 400 - Outfeed table length [mm]: 250 - Feed motor [kW]: 0.75 - Voltage [V]: 380 - Current consumption [A]: 36 - Fuse [A]: 63 - Transport dimensions: 1700mm x 1800mm x 2320mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Cedpozr Hx Uofx Ailsrh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Bütfering SCO 313 QEH 1. Cross Sanding Unit "Q" Segment width: 25 mm Unit type: Cross sanding unit with electronic pressure beam Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 13.5 kW Belt speed: 1-16 m/s Belt dimensions: 5360 x 150 mm Belt air cleaning 2. Unit with Electronic Pressure Beam "E" Segment width: 25 mm Unit type: Unit with electronic pressure beam Pressing element: CPS 2 system with variable sanding and edge pressure Codsw Sh Apopfx Ailjrh Motor power: 7.5 kW Belt speed: 2-18 m/s Belt dimensions: 2620 x 1350 mm Belt air cleaning 3. Unit with Pressure Lamella Belt "H" Segment width: 25 mm Unit type: Unit with electronic pressure beam and internal lamella belt Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 20 kW Belt speed: 1.5-12 m/s Belt dimensions: 2620 x 1350 mm Belt air cleaning Year of manufacture: 2007 Price: 17,500.-

Condition: excellent (used), CATALOGUE NUMBER 8046 Technical specifications: - max width of the workpiece 900mm - max height of the workpiece 160mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: - slipping rubber roller I unit - 2 x slipping rubber rollers II unit Crsdpfozx Rzyex Aileh - slipping rubber roller, smooth – from below: - conveyor belt - pneumatic belt oscillation - 2 types of feed speed 0.55kW - electric table lifting - main motor 7.5kW - operating pressure 6-8 bar - diameter of the dust extraction port 2x160mm - dimensions L/W/H 1300x1500x1950mm - weight 1100kg Advantages: – Italian-made, – unpainted – used grinder, very good condition Net price: 28900 PLN Net price: 6720 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6916 TECHNICAL DATA - Max. width of workpiece: 200mm - Max. height of workpiece: 150mm - 2 sanding units: upper – metal roller + shoe + metal roller lower – metal roller + shoe + metal roller from above: - pressure roller, metal - sanding unit - slip pressure roller, metal - cleaning brush - conveyor belt from below: - conveyor belt - 2 slip metal rollers, smooth - sanding unit - pressure roller, metal - cleaning brush - delivery roller - electrically adjustable sanding height - pneumatic oscillation of sanding belts - stepless feed rate adjustment - feed motors 0.55kW - main motors 2x4kW - air consumption 6-8 bar - diameter of dust extraction nozzles 3x80mm, 1x120mm - overall dimensions L/W/H 1800x2070x2000mm, weight 1422kg - Made in Germany, unpainted - Very good condition, used sander Net price: 22900 PLN Net price: 5326 EUR Codpfezty Npjx Ailsrh Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: like new (used), Lot of sandpaper for a Kündig wide-belt sander or similar. 5 pieces: EKA 1000 F 80 8 pieces: ARKFO 120 Technical data: Crjdpfx Aiez Iwqwoljh - Dimensions: 650 x 2000 mm

Condition: used, Year of construction: 2009, functionality: fully functional, overall weight: 1,500 kg, input current: 33 A, input voltage: 400 V, We are offering this used Boere Sandrite 1300 wide-belt sanding machine, manufactured in 2009. Manufacturer: Boere Model: Sandrite 1300 Year of manufacture: 2009 If you have any questions or would like more information, please feel free to send us a message or call us. Crodpfx Aoz Epitoileh

Condition: excellent (used), functionality: fully functional, overall weight: 3,500 kg, power: 52 kW (70.70 HP), table width: 1,350 mm, workpiece width (max.): 1,350 mm, 1. Cross-belt sanding 2. Segmented sanding pad The machine is in the excellent condition shown in the photos. It can be tested and works perfectly. Csdsz E Ig Dspfx Ailerh

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, Crjdpozkvd Rsfx Aileh automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: excellent (used), CATALOGUE NUMBER 6582 TECHNICAL DATA - max. width of the workpiece: 920 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW Top: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers Bottom: - 3 slip rubber rollers - conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of the dust extraction nozzle: 2 x 160 mm Cjdpfx Aszw Dcheiljrh - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg - Made in Germany - 2 units - Used grinder, very good condition Net price: 24,900 PLN Net price: 5,791 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7840 TECHNICAL DATA - Max. workpiece width: 630mm - Max. workpiece height: 110mm - 2 units: 1) Grooved rubber roller for calibration Crodpfx Aezr I Anjilsh 2) Grooved rubber roller for calibration + pad + metal roller - Top section: - Metal infeed roller, slip type - Unit - Metal slip roller - Unit - Metal slip roller - Bottom section: - 2 metal slip rollers - Feed belt - 2 metal slip rollers - Pneumatic oscillation of belts - 2 feed speeds - Motor: 2×7.5kW - Electric table lift - Operating pressure: 6-8 bar - Extraction port diameter: 2x160mm - Overall dimensions (LxWxH): 1650x1060x1970mm - Weight: 972kg ADVANTAGES – Polish-made – 2 processing units – Not repainted – Very good condition – Used sander Net price: 20,900 PLN Net price: 4,980 EUR (calculated at 4.2 EUR) (Prices may change with larger exchange rate fluctuations)