Used Johnford Gt-80D-2S for sale (2,365)

Condition: good (used), Year of construction: 2009, JOHNFORD CNC lathe Type GT-80D-2S Year 2009 CNC Control Fanuc Series 18i-TB Country of origin Taiwan Hfodpfx Aiot E Naujqjn Turret amount of positions 12 Bar passage 165 mm Serial no. TDF9007 Turning Length 2000 mm Turning Diameter Over Bed 1550 mm Spindle Speeds 1000 RPM Swing Diameter Over Bed Slide 1270 mm Longitudinal Travel (Z-Axis) 2000 mm Spindle Diameter In Front Bearing 240 mm Spindle Bore 185 mm Spindle power 37/30 kW Cross Travel 685 mm Rapid Travel Speed X-Axis 10 m / min Rapid Travel Speed Z-Axis 12 m / min Turret head 12 positions Machine length 9800 mm Machine width 3695 mm Machine Height 5292 mm Weight of the Machine Ca. 40 t

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar Hsdpfoz N H Enex Aiqjfn X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, turning length: 1,600 mm, turning diameter over cross slide: 700 mm, turning diameter: 920 mm, spindle motor power: 2,600 W, spindle speed (max.): 2,500 rpm, spindle bore: 115 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 1,600 mm, bar passage: 91 mm, total height: 2,765 mm, total length: 5,252 mm, total width: 2,778 mm, CNC Lathe JOHNFORD ST-70 AH 6 CF + Y TECHNICAL SPECIFICATIONS Hfedpeyz R D Nsfx Aiqon Brand: Johnford Model: ST-70 AH+CF+Y Year: 2013 CNC: Fanuc 21i-TD Swing over bed: 920 mm Swing over carriage: 700 mm X-axis travel: 370 mm Z-axis travel: 1600 mm Y-axis travel: +/-075 mm Driven tool + Y axis TBYA 250 turret (12 positions) - 3276 rpm / 37 kW Hydraulic 3-jaw chuck Ø 304 Programmable hydraulic tailstock with rotary quill Chip conveyor Bar capacity: 91 mm Spindle A2-8 / 2500 rpm / 22-26 kW PRICE AND FURTHER INFORMATION UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Spindle Head Spindle taper - BT-40 (BIG PLUS System) Hfodpfsxdiigsx Aiqon Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe - Tool probe - Rigid tapping - Electronic handwheel - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure

Condition: good (used), Year of construction: 2003, operating hours: 1,194 h, Genie GS-2032 scissor lift, articulating boom lift, 2005, 8 meters working height. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-works Nuland. Hfsdpszyavcofx Aiqen Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 800 mm, table load: 4,600 kg, overall weight: 18,600 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Johnford VMC-1600S was manufactured in 2014. It features a longitudinal travel of 1600 mm, cross travel of 1100 mm, and vertical travel of 800 mm. The machine has a robust table working surface of 1800 x 1000 mm and a maximum table load capacity of 4600 kg. If you are looking to get high-quality milling capabilities, consider the Johnford VMC-1600S vertical machining centre we have for sale. Contact us for further details. • Table working surface: 70.9” x 39.4” (1800 x 1000 mm) • Spindle nose to table: 5.9”–37.4” (150–950 mm) • Spindle center to column: 45.3” (1150 mm) • Spindle taper: • VMC-1600S: BT-40 / CAT-40 • VMC-1600SHD: BT-50 / CAT-50 • Spindle diameter: • VMC-1600S: 2.75” (70 mm) • VMC-1600SHD: 3.9” (100 mm) • Spindle speed: • VMC-1600S: Auto Hi-Lo Gear 80–8000 rpm • VMC-1600SHD: Auto Hi-Lo Gear 10–4500 rpm • Spindle motor: • VMC-1600S: 15/10 HP (15/20 HP optional) • VMC-1600SHD: 25/20 HP • Rapid traverse (X/Y/Z): 18 / 18 / 12 m/min • Feed (spindle): 1–12,000 mm/min • Tool selection: Bi-direction random type, shortest path • Number of tools: • VMC-1600S: Armless 24; Arm type 24/32 (optional) • VMC-1600SHD: Armless 20; Arm type 24/32 (optional) • Max tool diameter: • VMC-1600S: 4” (100 mm) • VMC-1600SHD: 9.8” (250 mm) • Max tool length: Hfsdjy A Ik Aepfx Aiqon • VMC-1600S: 12.5” (320 mm) • VMC-1600SHD: 15.7” (400 mm) • Max tool weight: • VMC-1600S: 22 lbs (10 kg) • VMC-1600SHD: 33 lbs (15 kg) • Floor space: 177.2” x 209.8” (4500 x 5330 mm) • X/Y/Z ballscrew diameter: φ50 / φ63 / φ50 • Cutting capacity (S45C): • Milling: 180 cc/min (S) / 320 cc/min (SHD) • Drilling: φ40 mm (S) / φ52 mm (SHD) • Tapping: M30 x P3.5 (S) / M50 x P4.5 (SHD)

Condition: good (used), Year of construction: 2018, functionality: fully functional, Oce Arizona 1260 GT Color: 6C (CMYK, plus white and varnish) Format: 2.5m x 1.25m Resolution: 6pl Varodot, 1440 dpi Speed: up to 34 m²/h New features: Registration pins Hodpfx Aez Ebrysiqefn Self-cleaning print heads New user interface (GUI) Optional: - ONYX THRIVE RIP - Roll option - Delivery - Installation - Training

Condition: good (used), Year of construction: 1999, functionality: fully functional, Vertical machining center Manufacturer: Johnford / Matra Model: FMC 850 Year of manufacture: 1999 Hours: see image - 24-tool changer with double gripper - Table size: 1000x500mm - Spindle speed: 8,000 rpm - Travel: 800x450mm - Fanuc Oi control system Hjdpjzkg Uyofx Aiqsfn - Machine is in working order and can be inspected while running.

Condition: good (used), Year of construction: 2005, operating hours: 1,200 h, Genie GS-2032 scissor lift, 2005, 8 meters working height. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can schedule a non-binding appointment for a viewing and/or test drive. Please call beforehand as we are not always on site. Hfedpfx Aozyau Soiqjn Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Hsdpfxezwqyyo Aiqofn Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blast wheel, number and type: 2 WX1M Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: ready for operation (used), functionality: fully functional, JOHNFORD 2VS TURRET MILL Excellent Condition! • R8 spindle • 42" x 9" table • 2-axis DRO • Work light • Coolant Machine cleaned and serviced Price: €4,250 ex works JOHNFORD 2VS FRÄSMASCHINE Ausgezeichneter Zustand! • R8-Spindel • 42" x 9" Tisch • 2-Achsen-Digitalanzeige (DRO) • Arbeitsleuchte • Kühlmittelanlage Maschine gereinigt und gewartet Hjdpfsy Tt S Tsx Aiqsfn Preis: 4.250 € ab Werk

Condition: good (used), Year of construction: 1990, Johnford 5 VH Milling machine by Johnford with Fagor digital readout, year of manufacture 1990, in good condition CE-compliant!! Technical data: Year of manufacture: 1990 Working area Table clamping surface: 1370 mm x 250 mm Maximum table load: 350 kg Travel distances X-axis travel: 800 mm Y-axis travel: 390 mm Z-axis travel: 380 mm Vertical milling head Spindle speed (vertical): 70 rpm - 3600 rpm Spindle taper: SK40 DIN 2080 Quill stroke: 127 mm Hfjdpfx Aoyalc Aoiqen Feed Quill feeds (3): 0.04; 0.08; 0.15 mm/rev Drive power Main drive motor output: 3.75 kW Dimensions and weights Dimensions (L x W x H): 2.54 m x 2.16 m x 2.24 m Weight: 1590 kg About the machine: This versatile universal milling machine combines all the advantages of the world’s best-selling milling machine with additional stability. Belonging to the category of conventional milling machines, it stands out as the top model of the 5 VH series with an SK 40 tool taper and a 30% higher net weight. Both the X and Y axes are equipped with infinitely variable feed units. The swiveling vertical milling head offers a wide speed range for machining steel and non-ferrous metals. Further features include a four-stage automatic quill feed, pneumatic tool clamping, and a large table for workpieces and clamping devices. Further milling machines from well-known manufacturers can be found on our website.

Condition: like new (used), Year of construction: 2016, operating hours: 9,300 h, machine/vehicle number: IntNr231649, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2016, with only approximately 9,300 operating hours. Technical Data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine Type: CNC Swiss-type automatic lathe Year of Manufacture: 2016 Control System: FANUC 31i-B Number of CNC Axes: 8 Number of Spindles: 2 Operating Hours: approx. 9,300 h Condition: very good Main Spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 rpm Spindle drive power: approx. 4 kW C-axis Counter-Spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 rpm Drive power: approx. 4 kW C-axis resolution: 0.001° Tool Carrier 1 8 tool positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 1 kW Tool Carrier 2 8 tool positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 1 kW Front machining Up to 4 tool positions Rear/Opposite-side machining Up to 8 tool positions Of which, up to 4 are driven positions Speed of driven tools: up to 6,000 rpm Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Hfjdpfx Aioz Er A Noqon Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V The machine can be inspected under power by prior appointment. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: like new (used), Year of construction: 2019, operating hours: 7,300 h, machine/vehicle number: IntNr231648, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2019, with only approximately 7,300 operating hours. Technical data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine type: CNC Swiss-type automatic lathe Year of manufacture: 2019 Control system: FANUC 31i-B Number of CNC axes: 8 Number of spindles: 2 Operating hours: approx. 7,300 h Condition: very good Main spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 min⁻¹ Spindle drive power: approx. 4 kW C-axis Hodpfx Aoz Er Tnoiqefn Counter spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 min⁻¹ Drive power: approx. 4 kW C-axis resolution: 0.001° Tool turret 1 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Tool turret 2 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Front machining up to 4 tool positions Rear/opposite-side machining Up to 8 tool positions Of which up to 4 are driven positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V The machine can be inspected while powered on by prior arrangement. Subject to changes, errors and prior sale!

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 600 mm, spindle motor power: 15,000 W, total height: 1,862 mm, total width: 2,020 mm, overall weight: 4,500 kg, controller manufacturer: FANUC, controller model: Oi-TC, product length (max.): 3,525 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2007. This Johnford SL-40 features a maximum bar diameter of Ø76.5 mm and an impressive X-axis travel of 240 mm, along with a Z-axis travel of 600 mm. It includes a 3-jaw chuck with a diameter of 254 mm and a hydraulic tailstock with a travel of 500 mm. If you are looking to get high-quality turning capabilities, consider the Johnford SL-40 machine we have for sale. Contact us for further details. - Weight: 4500 kg- Nominal Voltage: 380 V- Current Type: Three-phase current- Operating Current: 63 A- Frequency: 50 Hz- Power Capacity: 15 kW- Spindle Speed: 4000 rpm- Maximum Bar Diameter: Ø76.5 mm- Turret Stations: 12 stations- Tool Shank Size: 25x25 mm- X-axis Maximum Travel: 240 mm- Z-axis Maximum Travel: 600 mm- Tailstock Type: Hydraulic Tailstock MK-4- Tailstock Travel: 500 mm- Tailstock Stroke: 60 mm- Chuck Type: 3-jaw chuck Ø254 mm- Main Spindle Nose: A2-8- Additional Equipment: Hinge belt chip conveyor, Central lubrication for bedways, Air conditioning unit for cabinet, Electrical Transformer, Hydraulic power unit for 12-fold turret/tailstock/3-jaw chuck clamping pressure, 2x boring bar holders, Data Interface RS-232C- Included Manuals: Operator's Manual Fanuc Series Oi-TC (B-64114EN/01), Parameter Manual Fanuc Series Oi-Model_C (B-64120EN/02), Maintenance Manual Fanuc Series Oi-Model C Alarm-Liste (B-64115EN/03), CNC Lathe Instruction Manual S/O Nr: T256118 SL-40 Fanuc_OiT-C- Machine Dimensions: Length: 3525 mm, Width: 2020 mm, Height: 1862 mm Technical Specification Hodpezgf R Eefx Aiqsfn Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 925 mm, turning length: 2,800 mm, turning diameter: 1,200 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, CNC Siemens 840D Hfedpfx Aiswzyn Reqsn 48-tool changer, Capto C8 tools chip conveyor Forkardt 400MM chuck, 2 hydraulic steady rests SMW Autoblok capacity 2800x1250MM, spindle bore 132MM weight 23,500 kg

Condition: like new (used), Year of construction: 2018, DOOSAN GT 2600 M LATHE YEAR 2018 ONLY: 652 CUTTING HOURS Hodpez D Eq Rofx Aiqsfn MAX. ROTATING DIAMETER: 630 mm MAX. MACHINABLE LENGTH: 658 mm MAX. MACHINABLE DIAMETER: 460 mm BAR FEEDER CAPACITY: 82 mm SPINDLE SPEED: 35 - 3,500 RPM SPINDLE MOUNT: ASA - 8 TRAVEL: X: 265 mm Z: 680 mm MOTORIZED TURRET TAILSTOCK CHIP CONVEYOR TOOL PRESETTING WEIGHT: 5,500 KG

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,040 mm, turning diameter: 580 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,040 mm, TECHNICAL DETAILS Turning diameter: 580 mm Turning length: 1,040 mm Spindle speed: 3,500 rpm Travel range X-axis: 2,500 mm Travel range Z-axis: 1,040 mm Tailstock diameter: 85 mm MACHINE DETAILS CNC control: Fanuc 18T-C Dimensions & Weight Dimensions (L × W × H): 4,650 × 2,320 × 2,060 mm Hfodpfx Aijzu Rzreqon Machine weight approx.: 7,200 kg EQUIPMENT VDI turret with 12 driven tool stations Chip conveyor Machine without tailstock Foot switch Chuck Turning chuck

Condition: like new (used), Year of construction: 2022, functionality: fully functional, turning length: 725 mm, turning diameter over cross slide: 590 mm, turning diameter: 376 mm, spindle motor power: 30 W, spindle speed (max.): 2,800 rpm, spindle bore: 115 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, torque: 1,112 Nm, bar passage: 103 mm, bar diameter (max.): 103 mm, quill stroke: 100 mm, quill diameter: 100 mm, quill travel distance: 100 mm, swing diameter over cross slide: 590 mm, spindle nose: A 2-11, swing diameter over bed slide: 720 mm, feed force X-axis: 9,465 N, feed force Z-axis: 17,379 N, Equipment: documentation/manual, rotational speed infinitely variable, As-new machine, only used for commissioning and combined with a Universal BIG 70 LoadAssistant holder. Can also be purchased separately. Hjdpfx Asyud Uajiqofn

Condition: like new (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, turning length: 1,070 mm, turning diameter: 460 mm, spindle motor power: 22 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, ONLY 10 HOURS !!!!! There are 8 Doosan CNC Turning center Like this in our warehouse 1 Set DOOSAN GT2600 LM CNC Turning center With C Axis - 12 inç - 10 Hours 2 Set DOOSAN GT 2600 CNC Lathe 12 inç 10 hours 2 Set DOOSAN GT2100 CNC Lathe 10 inç 10 hours 3 Set DOOSAN Lynx 2100 CNC Lathe 8 inçh 10 Hours you can visit and check all machine Hfedezk I Rvjpfx Aiqen

Condition: excellent (used), Year of construction: 2024, 3 axes, C-axis with rotating tools Features: Maximum turning diameter over the bed: 400 mm Maximum turning diameter over the cross slide: 330 mm Bar capacity: Ø 51 mm Spindle nose: A2-6 Spindle bore: 65 mm Spindle speed: up to 4500 rpm Spindle motor power: 11/15 kW Hjdpfx Aoyzfgxeiqjfn Spindle bearing diameter: 100 mm X-axis travel: 180 mm Y-axis travel: +/- 40 mm Z-axis travel: 600 mm Rapid traverse: 24 m/min Number of tools in the turret: 12 stations Tailstock travel: 500 mm Sleeve travel: 60 mm Sleeve diameter: 60 mm Taper: MT#4 Bed inclination: 30° Guide type: prismatic slides Machine weight: approximately 4000 kg Dimensions: 3525 (with conveyor) x 1851 x H2020 mm Standard equipment Automatic lubrication system Coolant system Halogen work light Chip conveyor (chain type) Programmable hydraulic tailstock SMW Autoblock 3-jaw chuck Ø 175 mm 6 fixed tool holders Electronic handwheel Siemens 828D CNC control Videos available

Condition: new, functionality: fully functional, empty load weight: 652 kg, maximum load weight: 2,048 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,490 mm, loading space width: 2,105 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Tipping Trailer 450/2 S 2.7T NEW VEHICLE NEW SERIES Internal dimensions: 449cm x 210cm Total weight: 2700Kg Payload: 2048Kg Braked tandem axle trailer Overrun brake and handbrake from AL-KO Hfodpfx Ajzl Admoiqsn 2x 1350Kg axles and brake with automatic reverse function Low chassis Fully welded, hot-dip galvanized steel frame Tilting loading platform 6-degree approach angle Integrated steel loading ramps Automatic jockey wheel with 400Kg support load Numerous lashing eyes along the entire length Reinforced 10" C tires with steel valve M+S tires 13-pin connector Side marker lights in the front Rear lights with reversing light and triangular reflectors Winch with brake and bracket 2x wheel chocks OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with bracket -Complete LED lighting -Anti-theft device -Full aluminum floor made of aluminum panels -Aluminum floor with wood support -Anti-sway coupling -2 wheel stops for perforated steel tracks -Wheel stop across the entire width -Side boards More accessories available upon request! Plus freight to Gera and vehicle registration document: €275 net Images are for illustrative purposes and may show optional accessories that incur an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will also find a wide range of rental trailers with us. Visit us online or come by directly.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Professional Double-Sided Planer (Thicknesser) GOODTEK GT-635ARD (Year 2018) For sale, we offer a high-quality, industrial-grade double-sided planer from the renowned Taiwanese manufacturer, Good Tek Machinery Co., Ltd. The GT-635ARD model from 2018 is a powerful and extremely precise machine designed for continuous operation in furniture factories and sawmills. The machine allows for simultaneous planing and thicknessing of wooden components on both sides during a single pass, significantly reducing processing time. 🌟 KEY FEATURES: Spiral cutterheads (top/bottom): Equipped with replaceable carbide inserts (TCT). They provide a perfectly smooth wood surface, longer blade life, and significantly quieter operation compared to traditional straight knives. Electronic digital panel: Allows for quick and precise setting of the planing thickness with an accuracy of hundredths of a millimeter. Smooth feed with frequency converter: Adjustment of the feed speed allows for perfect matching of the working pace to the hardness and characteristics of the material being processed. CE certificate: The machine is fully approved for use in the European market and complies with strict safety standards. ⚙️ TECHNICAL SPECIFICATIONS: Manufacturer: Good Tek Machinery (Taiwan) Model: GT-635ARD Year of manufacture: 2018 Serial number: X6198 Maximum planing width: 635 mm Maximum planing height: 200 mm Total weight: 2880 kg (very rigid, heavy, cast iron construction that dampens vibrations) Power supply: AC 380 V / 50 Hz / Current: 56 A Hsdpfx Asztptdeiqjfn 🔌 MOTOR SPECIFICATIONS (Total power 38.5 HP / ~28.7 kW): Upper cutterhead motor: 20 HP (~15 kW) Lower cutterhead motor: 15 HP (~11 kW) Feed motor: 3 HP (~2.2 kW) Body/table lifting motor: 0.5 HP (~0.37 kW) 📈 TECHNICAL CONDITION: The machine is in perfect working order, well-maintained, and ready for immediate use in your facility. The electrical and mechanical components operate flawlessly. The central automatic lubrication system for the feed rollers guarantees trouble-free operation for many years.

Condition: good (used), Year of construction: 2007, MACHINE SPECIFICATIONS Brand JOHNFORD MODEL SV-48 CONTROL HEIDENHAIN 530 i TNC TABLE DIMENSIONS 1300X700 TRAVELS X, Y, Z X=1220 Y=710 Z=630 BT TAPER 40 SPINDLE RPM 60-10000 TOOL CHANGER UP TO 24 pcs. CHIP EXTRACTOR YES YEAR 2007 EXTERNAL MEASUREMENTS 3200 X 3900 X 2490 WEIGHT 9500 KG Hfsdpsxqra Ujfx Aiqsn

Condition: used, Year of construction: 2002, Technical details: grinding length: 1500 mm grinding width: 700 mm Hfodpfx Aiez Dvidsqjn workpiece height: 580 mm table load capacity: 2380 kp table speed -stepless-: 5 - 35 m/min grinding wheel dia. x width: 500 x 100 x 203 mm grinding wheel motor: 18 kW speeds:: infinitely variable (elektronically) total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, el.handwheel, full cabin *