Used Indur/ Hew Grating Mill for sale (10,231)

Condition: used, Drum diameter: 600mm, max. rotational speed: 1,500rpm, connected load: 30kW, made of stainless steel, movable on a steel frame, equipped with INDUR screens and HEW RF 10L/2 electric motor, manufacturer unknown, suitable for food products and spices. Ijdpfxoz R Ux Hs Ahbotn

Year of construction: 2001, condition: excellent (used), machine/vehicle number: R200 SE (R200 A.1), Complete sawmill Log lengths: 2.4–6.5 m Log diameters: 8–35 cm Line speed: 60–130 m/min. Capacity: 120,000 m³/shift Itodpfx Ahoz Tfa Esben Hewsaw R200 SE with banana infeed Left/right motor: 132 kW Top/bottom motor: 110 kW Saw motors: 132 kW Edging unit: 37 kW Board separator

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Itedjy Iyw Sspfx Ahben

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, Iodov Hcwtspfx Ahbstn rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Year of construction: 2025, condition: new, SPECIAL OFFER! Washing system with granulator + destoning system IWR2000 Washing system with granulator for fruit and vegetables. The system is made entirely of stainless steel and features a sorting grate, a washing tank, and a conveyor belt. The fruit falls into the water and, after pre-washing, is transported along the conveyor belt, where it is thoroughly cleaned with fresh water. The cleaned fruit is then transferred to the mill, where it can pass through the desired sieve to reach the desired mashing unit. Isdpfowcl Ulox Ahbotn • Easy to clean • Minimal maintenance • The belt speed is continuously adjustable in both directions • With 2 steerable rollers • With 2 fixed rollers Technical information Rated capacity: 2000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1400 mm Wash tank connection: G 6/4" Cleaning connection: G ½" Material: Wnr. 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min. Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg IPE4MAX The destoning and straining system is suitable for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotating rotor for straining or pitting stone fruit, pome fruit, and various types of fruit and berries. The pulp and seeds are ejected separately. The sieves can be replaced quickly and easily. The system is supplied with one sieve; additional sieves can be ordered separately. • Food-safe rubber scraper • Adjustable distance between sieve and scraper • Rolling machine feet/swivel casters with brakes Technical information • Rated capacity: up to 4000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear puree • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1130 mm Width: 574 mm Height: 1138 mm Weight: 125 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total height: 1,560 mm, total width: 1,100 mm, total length: 700 mm, overall weight: 400 kg, workpiece weight (max.): 100 kg, Apex comminuting mill Iodpfjz D Tbwjx Ahbstn Capacity > 100 kg / h (The engine is larger than Schutte) Stainless steel Simple design Compact size Used machine Screen sizes 2mm + one very small one (Will we get desired particle size)

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Isdpfx Ajq Nf U Ejhbstn Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: good (used), Year of construction: 2013, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, spindle speed (max.): 8,000 rpm, table width: 406 mm, table length: 1,372 mm, rotational speed (max.): 8,000 rpm, overall weight: 3,100 kg, space requirement width: 2,280 mm, space requirement length: 2,900 mm, space requirement height: 2,550 mm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis: 1.000 mm Y-axis: 500 mm Itsdpfxjvpl I Ts Ahbjn Z-axis: 530 mm Table size: 406 x 1.372 mm Spindle nose: BT 40 Spindle speeds: 1 - 8.000 rpm Controller: Fagor Featured with: - Cooling unit - User Manuals Country of origin: Taiwan Motor power: 10 HP Machine LxWxH: 2.900 x 2.280 x 2.550 mm Machine weight: 3.100 kg

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS Itodpfx Ahszvgdlobon MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, fuel type: electric, Year of construction: 2026, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: Itsdpfeq Igiisx Ahbsn - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Itjdsq Ngafspfx Ahbon Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The machine is unused! TECHNICAL DETAILS Rotor: Open rotor Grinding mechanism: 650 mm × 550 mm Application: Grinding of, for example, lumps MACHINE DETAILS Power: 22 kW Voltage: 380 V Frequency: 50 Hz Current consumption: 42.5 A Speed: 1,470 rpm Protection class: IP55 Insulation class: F Itsdpfx Ajzr Hzishben Operating mode: S1 – Continuous operation Sound level: 71 dB(A) Weight: approx. 190 kg EQUIPMENT Control system Star/delta connection possible Spare parts can be supplied for an additional charge.

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox. Isdpfx Aozvgvnshbetn

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Itodpeq Nx Alsfx Ahbsn Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, Year of construction: 1933, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,259 mm, travel distance Z-axis: 1,500 mm, table length: 1,250 mm, table width: 1,400 mm, overall weight: 10,500 kg, x-travel 1600 mm Itodpfx Ahjz Aun Ssbsn y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. Itjdsq Nf Uwopfx Ahbjn 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 Itsdjx Hkd Hjpfx Ahbon - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition

Condition: excellent (used), Year of construction: 2018, operating hours: 7,200 h, Technical Data Main spindle, counter spindle Turning length: mm 660 Spindle bore: mm 65 Chuck diameter: mm 165 Speed max.: min-1 6,000 Power (100% / 40% duty cycle): kW 20 / 24 Torque (100% / 40% duty cycle): Nm 125 / 170 C-axis resolution: degrees 0.001 Slide travel X: mm 710 Rapid traverse: m/min 60 Feed force: N 6000 Turret, lower / upper Speed max.: min-1 7,200 Power max.: kW 9 Torque max.: Nm 16 Milling spindle Tool system: HSK-A40 Speed max.: min-1 7,200 Torque (25% duty cycle): Nm 52 Power (25% duty cycle): kW 22 Tool holder 1 Slide travel X: mm 230 Rapid traverse: m/min 30 Feed force: N 6000 Slide travel Y: mm +/-65 Rapid traverse: m/min 15 Feed force: N 10,000 Slide travel Z: mm 845 Rapid traverse: m/min 50 Feed force: N 6000 3 Turrets Turret 1 YB - 6-position tool changer HSK Turret 2 Y Turret 3 y Year of manufacture 2018 Control system Siemens SINUMERIK 840D sl Turning length up to 660 mm Spindle bore 65 mm Milling spindle with 360-degree B-axis Production hours approx. 7,200 h Turret, lower and upper Feature Specification Stations and tool positions 14 stations per turret (VDI 25), a total of 42 tool positions Maximum speed 7,200 min⁻¹ Maximum power 9 kW Maximum torque 16 Nm Milling spindle Feature Specification Tool system HSK-A40 Iedpfx Ahjz Sywcobotn Tool magazine 6 tool positions B-axis 360 degrees Maximum speed 7,200 min⁻¹ Torque at 25 percent duty cycle 52 Nm Power at 25 percent duty cycle 22 kW Tool holder 1 Feature Specification X-axis 230 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±65 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 845 mm, rapid traverse 50 m/min, feed force 6,000 N Tool holder 2 Feature Specification X-axis 140 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±45 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 810 mm, rapid traverse 50 m/min, feed force 6,000 N Workpiece removal Feature Specification Design Gantry part removal system with conveyor belt Maximum workpiece length 200 mm Maximum workpiece weight 5 kg Dimensions and connection values Feature Specification Length × Width × Height 5,355 × 2,235 × 2,400 mm Weight approx. 8,500 kg Connected power 42 kW Bar feeder magazine and accessories Feature Specification Bar feeder magazine INDEX MBL 65 Coolant system KNOLL system with band filter and high-pressure pump 80 bar Automation Automatic door Accessories Tool holder

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Iedpfxjvzx Auj Ahbstn Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Iedpfx Ajz Izdujhbetn Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: used, Year of construction: 1988, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Quill travel: 80 mm Work table Table size: 1,000 × 400 mm Spindle Spindle speed: 20–3,000 rpm Spindle mount: SK 40 Feed rate and rapid traverse Automatically programmable feed rate: 1–4,000 mm/min Rapid traverse: 6 m/min Control system CNC control: Philips 432 Performance data Drive power: 12 kW Total power consumption: 15 kW Iedpfx Ahjz S Iz Nebetn EQUIPMENT Rotatable V-head Coolant pump Hydraulic tool clamping Automatic central lubrication Machine light Chip collection tray Splash guard enclosure

Condition: ready for operation (used), HEW R 160M/6-4 L engine, serial number as shown in the photo, mounting hole spacing: 255 x 210 mm, drive shaft diameter: 42 mm, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. ATTENTION: Please request separate quotes for packaging and shipping costs! Itsdpfx Ahoi D Ictebsn

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Isdpfx Ajxtiunshbotn Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: used, Year of construction: 1996, operating hours: 17,625 h, functionality: fully functional, machine/vehicle number: 03-106, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, total width: 2,700 mm, total height: 3,000 mm, total length: 7,000 mm, table length: 2,200 mm, table width: 850 mm, table height: 900 mm, spindle motor power: 22 W, workpiece weight (max.): 16,000 kg, grinding spindle motor power: 22 W, Equipment: documentation/manual, Fixed-table milling machine CME bf 03, travels 2000x1000x1000mm, Heidenhain 426 control, 30-tool changer (ISO 50), 4th axis, and internal cooling. Iedpsz Tdkiofx Ahbjtn It is used regularly and is in full working order.

Condition: good (used), Year of construction: 1988, functionality: fully functional, Burkhardt & Weber portal milling machine, year of manufacture 1988 / overhauled in 2008, Itsdpfxez Tnzxo Ahben Siemens Sinumerik 840 D control system, travel range X/Y/Z 4000 / 2800 / 800 mm, dual pallet changer, clamping area 1810 x 3025 mm, vertical clearance 1220 mm, horizontal clearance 2250 mm, 173-position tool changer / tool magazine, two-stage gearbox, swivel boring and milling head, high-pressure coolant system, chip conveyor, 3D measuring probe.