Used Indumac 4000 X100 for sale (2,870)

Condition: used, functionality: fully functional, INDUMAC FOLDING MACHINE 4000 X 100 TON WITH REGISTER USED MACHINE Dedoxltgxopfx Albokt INTERNAL CODE: SVR 290

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Dkjdpfxezqunhj Albst Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: like new (used), Year of construction: 2015, functionality: fully functional, We offer this as new MHM SPM 4000 12Z08 70x100 screen printing machine, year of manufacture 2015. If you have any questions or need more information, feel free to send us a message or give us a call. Dsdpfxoy I Iz Ee Albjkt

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Dksdpjrfucqsfx Albjt Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Dsdpszma Sksfx Albskt

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Djdpszma Tbofx Albokt Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor Dkjdpfow Ty S Sjx Albjt - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840 D-SL, rotational speed (max.): 16,000 rpm, coolant supply: 50 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, Heller FP 4000 + SCHULER LoadMaster Compact Year of manufacture: 2013 Control system: Siemens 840 D SL Operating hours: approx. 40,000 h Spindle hours: approx. 20,000 h Spindle: SCU 63 unit, 16,000 1/min, 40 kW, 80 Nm X-axis: 800 mm, Y-axis: 800 mm, Z-axis: 1000 mm 4th axis (table/C-axis): NC rotary table, pallet size 500 x 630 mm 5th axis (head/B-axis): Swivel milling head (swivel range approx. +15° to -105°) Rotary table: 360,000° x 0.001° Power dynamic: 60 m/min 2x pallets GRM with DIN hole pattern Tool holder: HSK 63 A Wireless measuring probe, manufacturer: RENISHAW Tool magazine: 240 positions (chain type) PMS multiple clamping Chip conveyor for wet machining - Monitoring + collision detection Fast drill breakage detection NC rotary table Special design KMA Interface for extraction system Schuler Loadmaster Compact: LMC 900/FP4000 Dkodpfxeztmhlj Albjt 19x additional pallets with DIN hole pattern Siemens control system Available very soon Loading and disassembly possible

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request Dedozy I Tpspfx Albskt

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Dsdpfszww R Sex Albskt

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Dsdpfx Aszp H R Eolbjkt Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15066, 1 x Atwell Labellers Ltd inline 3-head side-apply labelling machine with ICE Zodiac ES 8.4 Clarity thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. The label dispensers are run by a servo / stepping motor and is controlled by a micro-processor. Manufacturer - Atwell Labellers Ltd and EME etiketteringsmaskiner ApS. Models of Labelling Heads - 2 x EME Series 4000 and 1 x EME Series 2000. Model of Conveyor Section - EME MO-3000-S4-S2. Serial Number - 15066. Date of manufacture - 2015. Dsdpfxey Hkqyo Albjkt Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (adjustable - can go higher).

Condition: like new (used), Year of construction: 2019, operating hours: 9,620 h, functionality: fully functional, machine/vehicle number: 7607, feed length X-axis: 550 mm, feed length Y-axis: 340 mm, feed length Z-axis: 355 mm, travel distance X-axis: 415 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, total height: 2,450 mm, total width: 2,250 mm, total length: 2,350 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,000 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, distance table to spindle center: 495 mm, space requirement width: 2,500 mm, space requirement length: 2,600 mm, space requirement height: 2,600 mm, warranty duration: 6 months, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, HSC 300/3 - 3-axis TNC640 High-speed machining center Technical data: Working area X/Y/Z 415x340x355 Workpiece weight max. 500 kg Distance machine table - spindle nose 495 mm Machine dimensions (W x D x H) 2250x2350x2450 mm Machine weight approx. 4000 kg Power connection Three-phase 400V/50Hz Equipment Color Light gray Control Heidenhain TNC640 NC-34059008 SP1HF1 Milling spindle Steptec HVC140 Speed 42,000 rpm Tool holder HSK40-E Tool positions 16 Tool measurement with laser Handwheel Renishaw probing system OMP400 Minimum quantity lubrication Adjustable air supply Dust extraction L.CUT1 with silencer attachment Services including transport, on-site installation, training Options available on request: Automation with AWEX50/5 50 electrode changer positions 5 pallet changer positions Dkedpfxjzzklqe Albst

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Dksdszx Anxepfx Albot Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

Condition: good (used), Year of construction: 2018, spindle bore: 140 mm, turning diameter over bed slide: 1,100 mm, center width: 4,000 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 4 rpm, overall weight: 14,500 kg, Turning lathe, manufacturer: FAT HACO, type: TUR SMN 1100 x 4000 Dedpfxjzvwmqe Albjkt Year of manufacture: 2018, serial number: 180529, control system: SIEMENS 840 D SL, distance between centers: 4,000 mm, swing diameter over bed: 1,100 mm, swing diameter over cross slide: 790 mm, max. workpiece weight between centers: 4,000 kg, spindle speed: 4 to 1,200 rpm, spindle bore: 140 mm, drive power: 33 kW, machine weight: 14,500 kg. The standard equipment of the machine includes an 8-position VDI turret, a hydraulic steady rest, an automatic gear change, a coolant system, a hydraulic unit, an automatic lubrication system, work area lighting, a USB port, and CE-compliant design.

Condition: excellent (used), functionality: fully functional, We are offering this very well-maintained Fasti PC 4000 pivoting bending machine, 3 m long, with a segmented die and a back gauge. Manufacturer: Fasti Model: PC 4000 Condition: very good Year of manufacture: Category ID: 1470 Type ID: 1258 Machine type: Pivoting bending machine Part number: 7.0559 B For sale: 3 m sheet metal bending machine in good condition, with a back gauge and the option to mount the upper die as a segment. Various die adapters are also available. If interested, an upper tooling platform is also available for an additional 1,000 EUR to the machine price. If you have any questions or need more information, please feel free to send us a message or call us. Dkjdpfx Aezxptbelbjt

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 35001032, turning length: 40,000 mm, turning diameter: 890 mm, spindle motor power: 69,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 1,800 rpm, spindle bore: 122 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 260 mm, type of input current: three-phase, quill stroke: 140 mm, quill diameter: 120 mm, quill travel distance: 3,958 mm, spindle nose: A15, overall weight: 25,500 kg, spindle diameter: 200 mm, feed force X-axis: 10,000 N, feed force Z-axis: 22,000 N, distance between centers: 4,000 mm, Equipment: documentation/manual, For sale is a Heyligenstaedt Heynuflex turning and milling center, which is currently still in production. The machine is in operational condition and can be inspected under power and in operation until September 14, 2026. Machine type: Hn35U/4000 Flex Commission number: 35001032 Year of manufacture: 1994 Working area: - Turning length: 4000 mm - Swing diameter over bed: 890 mm Main drive: - Power at 100% duty cycle: 50 kW - Power at 50% duty cycle: 69 kW Main spindle: - Spindle diameter at the front bearing: 200 mm - Spindle bore: 120 mm - Spindle head shape: Shape A DIN55026 Gr15 - Speed range: - Gear stage 1: 1 – 540 rpm - Gear stage 2: 7 – 1800 rpm Feed: - Rapid traverse speed max.: 15 m/min - Planar feed: 0.5 - 5000 mm/min - Longitudinal feed: 0.5 - 5000 mm/min Tool carrier system: - Tool interface: Capto C8 - Linear travel range Y-axis: +/- 130 mm Dkjdpezwb Dpofx Albjt - Linear travel range X-axis: 980 mm - Tool magazine: 36 tools Tailstock: - Quill diameter/stroke: 125 mm / 140 mm - Axial force min/max: 16000/2500 N - Internal taper quill: MK 5 Control system: - Type: Siemens 880T If you are interested or would like to arrange a viewing appointment, please do not hesitate to contact us.

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods Dkedpfxjzuyg Re Albet JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: used, Year of construction: 2015, Colour: White Weight: 4.000 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AE/034421 - Main motor power [kW]: 9.0 - Software: Wincut 12.2.9 - Saw blade bore diameter [mm]: 80 - Max. saw blade diameter [mm]: 320 - Max. cutting length [mm]: 4150 - Max. cutting width [mm]: 2200 - Max. cutting height [mm]: 67 - Spindle speed: - └ Min. spindle speed [rpm]: 1000 - └ Max. spindle speed [rpm]: 5000 - └ Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 21 - Fuse [A]: 32 - Power [kW]: 8.4 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dedpfx Aezzb I Njlbjkt Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, Deckel Maho NHX 4000 Horizontal Machining Center Horizontal Machining Center, Deckel Maho Type / Model: DMG NHX 4000 Condition: Used Year of Manufacture: 2012 Program Runtime: approx. 48,200 hours Spindle Hours: approx. 39,200 hours Technical Data Travel distances X / Y / Z axis: 560 mm / 560 mm / 660 mm Rapid traverse rate (X/Y/Z): 60 m/min Work table & Pallets: 2-way pallet changer, standard (APC) Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece dimensions (Ø x H): Ø 630 x 900 mm Pallet changing time: approx. 8.0 seconds B-axis (rotary table): 360° (division 0.001°, direct drive) Main spindle Max. speed: 12,000 rpm Drive power: approx. 11 kW Max. torque: approx. 110 Nm Tool interface: SK 40, tool changer STC Tool changer (ATC) Magazine slots: 60 magazine slots Max. tool diameter: 70 mm (with free adjacent slots up to 170 mm) Max. tool length: 450 mm Max. tool weight: 12 kg Electrical data Power connection: 400 V 3/N, PE 50 Hz Power consumption: 33 kVa In max.: 48 A Max. fuse rating: 80 A DC control voltage: 24 VDC AC supply voltage: 230 VAC Equipment 1: Smartline Line 36kW Equipment 2: NX15 Dkodpfxjzxc H Ue Albot Dimensions & Weight Machine weight: approx. 8,000 kg Footprint / Dimensions (W/D/H): approx. 2,680 x 2,540 mm Control: Siemens 840D SL Equipment Indexing table Tool measuring system, 60 tools SK40 Direct measuring system Tool breakage control MSC Coolant system IKZ 35 bar Chip conveyor Signal light Inquiry item: Transportation costs in individual offer

Condition: new, plate width 4000 mm plate depth 1000 mm plate height 300 mm weight 3500 kg dimensions of the machine ca. 4000 x 1000 x 300 mm GERD WOLFF clamping plate 4000 x 1000 x 300 mm If you cannot find the size you are looking for, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 X 28 Dsdpfx Alsyk Ikwsbskt T-slot spacing: 300 Number of slots: 3 Edge distance: 200 Weight: 3500 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 48390-115-3078, We are offering this ready-to-use Metso M&J 4000 M pre-crusher, manufactured in 2012. Manufacturer: Metso Model: M&J 4000 M Dkjdpfezm Eiuex Albot Serial number: 48390-116-3078 Year of manufacture: 2012 EC type approval: e1*97/68HA*2004/26*0346*00 Machine no.: 14 of 50 Engine ID: 942.992-C-0837-242 If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 8070850, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG Photonics GmbH, laser power: 4,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, overall weight: 420 kg, total length: 856 mm, total width: 806 mm, total height: 1,186 mm, Equipment: cooling unit, Technical Data Manufacturer: IPG Laser GmbH Laser Model: YLS-4000-S2-IHE Serial Number (SN): 8070850 Rated Voltage: 400V AC +-10% 3P/PE Frequency: 50/60 Hz Full Load Current: 80 A Fuses: 80A / 120kA Date of Manufacture: 08.12.2008 Wiring Diagram: G25-16-70820-4 Cooler Wiring Diagram: G25-16-61012-4 Certification: CE marking Wavelength: 1070 nm Wavelength Bandwidth: approx. 1070 nm – 1080 nm Rated Output Power: 4.0 kW Laser Class: Class 4 Power Control: 10% to 100% Typical Fiber Diameter (Delivery Fiber): Mostly 100 µm (micrometers) Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Dksdpfxozc Hpve Albjt Machine Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 640 mm, total height: 2,791 mm, total width: 2,160 mm, overall weight: 9,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 40, tool weight: 8,000 g, product length (max.): 4,463 mm, number of axes: 4, This 4-axis Mazak NEXUS 4000 II was manufactured in 2011. It features an X-axis travel of 560 mm, Y-axis travel of 630 mm, and Z-axis travel of 640 mm. The machine has a maximum workpiece diameter of Ø630 mm and a weight capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 4000 II horizontal machining centre we have for sale. Contact us for further details. • Travels • Rapid traverse (X/Y/Z): 60,000 mm/min • Max. cutting feed: 60,000 mm/min • Workpiece capacity • Max. workpiece diameter: Ø630 mm • Max. workpiece height: 900 mm • Max. workpiece weight: 400 kg • Pallet / Table • Pallet size: 400 × 400 mm • Standard pallet changer: 2 pallets • Pallet change time: 6 sec • Standard B-axis indexing: 1° × 360 positions • B-axis indexing time: 1.3 sec / 90° • Optional NC positioning table: 0.001° • Optional NC rotary table: 0.0001° • Pallet positioning repeatability: ≤4 µm • Spindle (two configurations) Dodpezx U H Tefx Albokt • 12,000 rpm high-torque spindle • 30 kW / 30 min; 22 kW continuous • Max. torque: 300 Nm • 18,000 rpm high-speed spindle • 35 kW / 30 min; 26 kW continuous • Max. torque: 168 Nm • Spindle speed range: 35–12,000 rpm or 35–18,000 rpm (depending on version) • ATC / Tool magazine • Standard magazine: 40 tools • Optional: 60 / 80 / 120 / 160 tools • Tool holder: ISO BT40 • Max. tool diameter: Ø95 mm • Max. tool diameter without adjacent tools: Ø150 mm • Max. tool length: 420 mm • Chip-to-chip time: 2.7 s with tools

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Dedpfjzdiz Nox Albekt Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.