Used Ims Shear for sale (2,015)

Condition: good (used), punching force: 45 t, - Capacity 45 tons - Hydraulic - 4 stations - Foot control - Emergency stop - 400 V Gedpfx Aju Havweb Deit

Year of construction: 1998, condition: ready for operation (used), machine/vehicle number: 2131, Max. pressure: 55 kN Throat: 175 mm Adjustable punching stroke: 0 - 28 mm Gjdpfx Abonacy Tj Dsit Number of strokes at 15 mm stroke: 30 Notching stroke adjustable: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Floor space required: 1170 x 620 x 1470 mm weight: 930 kg

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Gjdpfevg Rh Tjx Ab Djit Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Year of construction: 2003, condition: ready for operation (used), There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t. Giodpfjivt R Aex Ab Dst

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, TECHNICAL FEATURES: Press Model: T25-VE Year of construction: 1996 Nominal force: kN 250 Free passage between the uprights mm: 220 Distance between the axis of the connecting rod and the uprights (notch) mm: 160 Dimensions of the mallet mm: 250x130 Worktable dimensions mm: 500x310 Minimum distance between worktable and mace with high adjustment Gijdpettwfyjfx Ab Det and mallet all the way down mm: 275 Mace adjustment mm: 50 Adjustable stroke mm: 0÷60 Shank hole diameter mm: 40 No. strokes per minute: 155 Engine power KW: 1.5 Total mass Kg: 950 Operating voltage V: 380 Frequency Hz: 50 Dimensions mm: H=1890; L=1000; D=980 Lubrication pump motor power Kw: 0.09 Complete with user manual and CE compliance Warranty six (6) months excluding electronic parts. NEW COMPONENTS INSTALLED: - Front and side safety guards with safety keys; - Motor bearings; - Tang locks; - Flywheel bearings; - Flywheel belts; - Work surface brightened on CNC machine

Condition: good (used), Year of construction: 2001, Table 950x650 mm, ram 610x410 mm, stroke 0-140 mm Giodpfxjqgcaao Ab Dst

Condition: used, functionality: fully functional, ---IMS PHY 1100 PUNCHING MACHINE, YEAR 2008, MAX PUNCHING 32X26 mm. Overall dimensions 185X75X210(h) cm, Machine weight 1800 kg ---IMS HY 45 VS PUNCHING MACHINE YEAR 2005 Hydraulic single punch Power 45 ton 5 work stations (slotting, angular cutting, bar cutting, shearing) Punching diameter 32 mm X 12 mm Gijdewn Hu Ropfx Ab Djt Slotting 50X40 x 6 mm 90 degree angular cutting 80 mm X 80 mm X 8 mm Plates 300 mm X11 mm Swan neck 170 mm Controlled or free descent Self-moving extractor Adjustment of punch upper dead point Check squares Motor power 4 kW Overall dimensions 100X60X180(h) cm, Machine weight 500 kg

Condition: excellent (used), functionality: fully functional, overall weight: 1,800 kg, Year of construction: 2024, operating pressure: 400 bar, machine/vehicle number: S10 00164, The shear was used for only one project! TECHNICAL DETAILS Working pressure: 400 bar Oil flow in cylinder: 200 L/min Rotational pressure: 110 bar Oil flow during rotation: 20 L/min MACHINE DETAILS Gisdpfxoy Ia Iws Ab Dot Weight: 1,800 kg Compatible excavators: boom weight min. 10 t, max. 20 t

Condition: used, Year of construction: 2016, gebraucht 2016 9737 prompt, Zwischenverkauf v 7300 € 1 2025 mm 3 mm 500 mm 4 kW Gjdpjwiq Iwsfx Ab Djit 2500 mm 1720 mm 1200 mm 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity

Condition: new, Year of construction: 2026, 3050 mm 06,0 mm 0,5-3,0 ° 1000 mm Gijdpjy Sbkusfx Ab Djt table height 770 mm work height max. 0 mm

Condition: excellent (used), Slate shears TS NS1 in case Gijdpjy Sayzsfx Ab Dst - Attachments for cordless screwdriver - As new

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, control type: NC control, working width: 3,200 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Motorized Guillotine Shear Make: Schröder Model: MHSU V 3200 x 3.0 Year: 2007 Technical Data Manufacturer: Schröder Model: MHSU V 3200 x 3.0 Year of manufacture: 2007 Working length: 3200 mm Gedpfx Ajy R Na Ujb Deit Sheet thickness: 3.0 mm Strokes per minute: 34 (continuous mode only) Drive power: 9 kVA Dimensions: L 4.0 x W 1.9 (plus support arms 0.6m) x H 1.5 m Weight: 3300 kg Equipment - POS 100 control system with 9-fold program memory - Pneumatically controlled sheet support device - Linear front guide for movable T-slot consoles - 2 movable support arms on linear guide - Right-hand extended back gauge with T-slot and scale (currently dismantled) - Hold-down device with hard rubber strip to protect polished sheets - Rear area safeguarding via light barrier - Selector switch for single and continuous stroke - Foot switch All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2026, 3050 mm 12,0 mm 0,5-3,0 ° 1000 mm table height 930 mm Gedpsxpi Dhsfx Ab Djit work height max. 930 mm

Condition: new, Year of construction: 2026, 3050 mm 13,0 mm 0,5-2,5 ° 1000 mm Giodpewp Tduofx Ab Dot work height max. 900 mm

Condition: new, Year of construction: 2024, 3050 mm Godpfowp Tfrex Ab Deit 06,5 mm 0,5-2,5 ° 1000 mm

Condition: new, Year of construction: 2025, sheet width 1360 mm plate thickness 06,0 mm table width 455 mm work height max. 880 mm cutting angle 1°30 ° rear stop 750 mm Giodpfxoxpi Dbe Ab Dot

Condition: good (used), functionality: fully functional, Year of construction: 2020, Hydraulic Guillotine Shear Make: Fasti Type: 530 – 3000 x 6mm Year: 2020 Technical Specifications Manufacturer Schröder Model 530 - 30/6 Year of Manufacture 2020 Sheet Width 3040 mm Sheet Thickness 6.00 mm (400 N/mm²) Blade Gap Adjustment 0.5 – 1.8 mm Strokes per Minute 24-61 spm Gedpfx Aoy R Dcwsb Deit Drive Power 12.0 kW Space Requirement (LxWxH) Approx. 4.00 x 3.00 x 1.96 m Weight Approx. 6.5 t Equipment/Features - 12” touchscreen controller PSC 150 on swiveling panel - Energy-efficient drive for frequency-controlled motor and pump - Automatic blade gap adjustment - Adjustable hold-down pressure selectable via the control system - Motorized backgauge 10–1000 mm with ball screw spindles - Pneumatic sheet holding device - LED cutting edge illumination - Programmable start and end position for the blade beam - Angle stop mounted on the left incl. electronic length measurement system, fine adjustment, and lateral flip stop with linear guide, 1000 mm - 2 backgauge arms with ball rollers, adjustable on linear guides - Table support made of stainless steel sheets with ball rollers - Rear area secured with light barrier - Scrap and small parts chute to the front incl. "Return to Sender" function - Movable table extension mounted on guide rail - Finger guard, can be raised approx. 1500 mm, incl. electrical safeguarding All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears Gedpfx Ash U U Tgeb Dsit -Manufacturer: Thälmann, lever shears, profile steel shears type ScDH8 -Steel sheet: up to 8 mm -Round steel: up to 16 mm -Cutting performance: see photo type plate -Holder: continuously adjustable -Number: 2x lever scissors available -Price: per piece -Dimensions: 700/230/H1435 mm / 720/230/H1370 mm -Weight: 88 kg / 90 kg

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Manufacturer: Peddinghaus Model: 210/25s Giedswcqmaopfx Ab Dst Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Godpfxevkbrqo Ab Djit Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: used, total length: 2,500 mm, total width: 1,700 mm, total height: 1,500 mm, Colour: Grey Weight: 2.050 kg Gijdpfx Abjyzp A Re Det - Documentation available: Yes - CE certificate present: No - Serial number: 14/9 - Drive system: Conventional - Drive type: Mechanical - Power [kW]: 5.5 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 2040 - Cutting speed [mm/min]: 50 - Throat depth [mm]: 100 - Backgauge depth [mm]: 550 - Transport dimensions: 2500mm x 1700mm x 1500mm (l x w x h) - Transport weight [kg]: 2050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1988, total length: 4,300 mm, total width: 3,000 mm, total height: 2,500 mm, Colour: Grey Weight: 13.700 kg Price: On request - Year: 1988 Giodpfx Ajyym Iheb Det - Documentation available: No - CE certificate present: No - Serial number: 15322 - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 3100 - Backgauge depth [mm]: 1000 - Transport dimensions: 4300mm x 3000mm x 2500mm (l x w x h) - Transport weight [kg]: 13700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL Gijdey Raitspfx Ab Dot cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type "E10-S" - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - original instruction manual

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm Giedpfx Absy Raime Det no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Discharge conveyor + hold-up system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear is equipped with a discharge conveyor, hold-up system, and scrap bin combined in one unit. Behind this, an original Amada discharge conveyor with material stacker has been installed. The system is frequency-controlled. The machine is in very good condition and was exclusively used for thin material. All documentation is available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Giodpfx Aey Sbu Hob Dst Control: Amada Automatic cutting angle adjustment Automatic blade gap adjustment Backgauge: 1000 mm Hold-up system: pneumatic Length x width x height: 3790 x 2230 x 1860 mm Weight: 6150 kg