Used Hosokawa Micron 20-Mfc-43 for sale (31,113)

Condition: used, Year of construction: 2023, Vertical mixing line consisting of: Hosokawa micron 20-MFC-43 conical mixing tank, year of manufacture 2023, capacity 2000 kg, total volume 3350 liters, empty weight approx. 1350 kg Donaldson Torit DCE dust filter, type DCE 125 F, year of manufacture 2023 Ruberg eddy current separator, type RWS 2-220, year of manufacture 2023 Goudsmit magnetics magnetic separator 2 screw conveyors 400 Volt Documentation available This lot extends from the 1st to the 2nd floor, up to the 1st ring above the Y-junction (rotary airlock not included) Dimensions of the upper part: approx. ø 220 cm Chodpfoz Ipplsx Afgoc Dimensions of the lower part: approx. 310x290x300 cm Mixing system with a round mixing tank, horizontal mixing unit, and multiple electric motors. Details: Configuration: round mixing tank on a frame with a horizontal mixing unit Drive: multiple electric motors Included: piping and fittings Material: metal, partially stainless steel Condition: used

Condition: used, Year of construction: 2002, machine/vehicle number: 6696301000, Used Hosokawa model 20-MSC-43 nauta conical screw mixer. - Working volume: 1700 litre. - Working pressure: Atmospheric. - Product contact parts: Stainless steel 1.4301. - Cone has dimensions (approx.): 2048 mm diameter x 2820 mm cone height / 3523 mm total height (bottom edge of discharge valve - drive). - Top semi-circular covers: 1x hinged cover with safety mesh, 1x bolted cover with flanges DN200 and DN100 Cjdpfjx R S Tkex Afgshc - Non-supported screw agitator: driven by 5.5 kW electric motor, final rpms of screws 70 rpm - Arm: driven by 0.55 kW electric motor, final rpms of arm 1.2 rpm - Includes: discharge valve. - Mounted: (3) lugs.

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Chjdpfxjzvxvas Afgec Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) Chodpfx Aszvxxnofgec 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production Cjdpezxt Snjfx Afgshc - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: used, Year of construction: 2011, STAR ECAS-20 — CNC SWISS-TYPE AUTOMATIC LATHE MACHINE IDENTIFICATION — VERIFIED FROM NAMEPLATE Manufacturer: Star Micronics Co., Ltd., Japan Model: ECAS-20 Type: 570 Manufacturing date: March 2011 Serial number: 0509 Lot number: 047 Supply voltage: AC 200 V, three-phase Frequency: 50/60 Hz Rated apparent power: 8.0 kVA Machine weight: 3,500 kg CE marking: Present MODEL SPECIFICATIONS — MANUFACTURER DATA Configuration: 10 axes; independent front/back machining; simultaneous two-tool turning Control system: Star Motion Control System Maximum machining diameter: 20 mm Headstock stroke: 205 mm MAIN AND SUB-SPINDLES Cjdpfxjz D Ezve Afgehc Maximum speed: 10,000 rpm each Motor output each: 2.2 kW continuous / 3.7 kW for 30 minutes C-axis indexing: 0.01° each Sub-spindle chucking diameter: 20 mm Front-ejection length: 80 mm Workpiece projection: 30 mm TOOLING Turning positions: 4 front, 2 rear Tool shank: 12 mm; optional 16 mm Sleeve-holder positions: 4; optional 2 rear-end stationary tools Stationary drilling: Ø10 mm Tapping/die-cutting: M8 × 1.25 Optional driven positions: 3 front, 3 rear Driven-tool speed: 8,000 rpm Driven-tool motor: 0.75 kW Driven drilling: Ø8 mm Driven tapping: M6 × 1.0 Milling: Ø10 mm Slotting: 1.5 mm wide × 4 mm deep BACKWORKING Tool positions: 4 Drilling, stationary/driven: Ø10/Ø8 mm Tapping, stationary/driven: M8 × 1.25 / M6 × 1.0 CAPACITY AND DIMENSIONS Coolant tank: 120 litres Machine dimensions (W × D × H): 2,588 × 1,150 × 1,765 mm Overall installation dimensions with peripherals: Unconfirmed EQUIPMENT VISIBLE IN PHOTOGRAPHS Bar-feeding equipment with pendant control Fire-suppression cylinder and automatic CO₂ warning label CNC operator panel

Condition: used, Hosokawa Alpine Turboplex Classifier for ultrafine classification of dry powders. Chsdozvgl Aopfx Afgoc Model 500 ATP-NG (New Generation). Classifier wheel designed for reduced pressure drop and hence power consumption. Classifier manufactured in 2002 for project in Turkey. In storage for the last 8 years. Installed power - 22 kW. Airflow - 7500 m3/hour. Fineness range - 97% passing 120 - 8 micron. Can be used for separation of powders or for operation in closed circuit with a mill. Feeding introduced either by gravity from above or in airstream from below. Scope of supply includes 55 kW exhaust fan to generate airflow through classifier system. PPDS can supply ancillary equipment and controls to complete system if required. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can provide a full refurbishment service. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Three machines available, each with an exhaust fan. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Model Type 8 HP VC 1200-325 Volume 9980l Chodpfxjufy S He Afgjc Weight 2200kg

Year of construction: 2023, condition: new, Rental system Hosokawa Alpine AS 200 Baseline. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without aspirator) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Chjdpfxsm Nbnro Afgsc Product / End fineness / Throughput Celecoxib 90% ᐸ 23 μm 33 kg/h Nifedipine 90% ᐸ 2.4 μm 8 kg/h Progesterone 90% ᐸ 9 μm 20 kg/h Diosmin 90% ᐸ 4 μm 8 kg/h Omeprazole 99% ᐸ 5 μm 3 kg/h Cosmetic powder 90% ᐸ 10 μm 15 kg/h A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2023, condition: used, functionality: fully functional, Hosokawa Alpine hammer mill Type UPZ 500 Year of construction: 2023 Weight: 1300 kg Capacity/max: 5,910 l/min Dimensions: approx. 230x110x129 cm Documentation available This lot is located in room 3 Hosokawa Alpine centrifugal fan with electric motor on a steel base frame. Details: Brand: Hosokawa Alpine Type: centrifugal fan Drive: electric motor Design: housing with protective cover and connection/piping Frame: steel base frame Chedez Iam Ispfx Afgsc Color: gray with blue motor Condition: used

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 0.75 kW (1.02 HP), For sale: welding fume extractor and soundproof enclosure in good condition with low hours of use. The unit is fully operational and can be tested. Price on request. Cjdpfoyk Snmox Afgehc

Condition: like new (used), Year of construction: 2021, Hydraulic 4-roll bending machine Cedpfxoz I D Ags Afgohc Digital display of roll positions Capability to form cones Length: 3050 mm Diameter of upper rolls: 220 mm Diameter of side rolls: 180 mm Bending capacity: 7 to 8 mm with a minimum radius of 1000 mm Machine dimensions: 4700 x 1100 x 1330 mm Weight: 5700 kg Operating videos available upon request.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: M+ Mazatrol, table load: 1,000 kg, TECHNICAL DETAILS Travel in the X-axis: 1,660 mm Travel in the Y-axis: 510 mm Travel in the Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tools MACHINE DETAILS Control system: M+ Mazatrol Machine weight approx.: 7,500 kg Space requirement approx.: 5 m² EQUIPMENT Chjdoz Ahw Hjpfx Afgjc Chip conveyor: MAYFRAN 4th axis: Tilting rotary table: Rotamatik RM 100

Year of construction: 2022, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Materials and surfaces In contact with product: 316 L stainless steel. (1.4404) Ra ᐸ1.2 μm not in contact with product: stainless steel 304 (1.4301) Ra ᐸ1,2μm Drives Three-phase current geared motors Chedpfxjfhmmxj Afgjc Technical data rolls Nominal power (kW): 4,0 Speed (rpm) 3 - 30 voltage: 400 V, 50 Hz Protection class: IP 55 Compacting rollers The rollers for the PHARMAPAKTOR are made of hardened stainless steel. Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls. Roller profile: At your choice roller diameter: 200 mm roller width: 50 mm roller gap: 2.5 mm

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Cedpjzvmx Nofx Afgshc Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row Chsdpszl E N Esfx Afgec The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Chedpfxszvmpnj Afgec Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. Chsdszl E Stopfx Afgoc The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Cjdpfx Afjzvgu Degohc Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Chodpfxszvmxpj Afgec Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Year of construction: 1999, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Chjdpfx Aei E Himefgoc Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine APC K 200-50 pharmapactor with Flake Crusher AFC 300. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Specially built for pharma industry. Material of construction: - product contacting parts: stainless steel - none product contacting parts: stainless steel Non Pressure Shock Resistant (NPSR), non ATEX Scope: Hosokawa Alpine Pharmapaktor APC K200/50 with 4,0 kW motor, feeding screw with 1,1 kW motor + Flake Crusher AFC 300 with 0,75 kW motor

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Chodpfxsi Dx Sbo Afgoc

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Codoz Iql Ispfx Afgohc Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240 L210-2 2000 robot, serial number 910437, industrial robot including control cabinet 56178. The KUKA KR 240 L210-2 robot is a 6-axis robot arm with a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications for the KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, polishing, material handling, palletizing, and remote TCP. Specifications Manufacturer: KUKA Model: KR 240 L210-2 2000 Type: Robot arm Axes: 6 Payload: 210 kg Reach: 2900 mm Repeatability: 0.06 mm Weight: 1277 kg Serial number: 910437 Control cabinet: 56178 Year of manufacture: 01/2008 Codpfxjzmr Rls Afgjhc Used – normal signs of wear. Further details, article numbers, and images available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Local pick-up in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please specify the delivery address.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,858 h, clamping force: 4,200 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine. • Injection capacity (PP): 1.2 kg • Minimum mould dimensions: 380 mm • Tie bar spacing: 800 x 800 mm Cjdpfx Asy S Tw Hefgehc • Maximum mould opening: 1400 mm • Working hours: 44,858 h • The robot, conveyor belt, and material hopper are not included.