Used Hosokawa Alpine Mill for sale (9,723)

Condition: ready for operation (used), functionality: fully functional, color: grey, Year of construction: 1988, Aeroplex fluidised bed counterjet mill 400 AFG The plant is fully functional and can be inspected on site. Trial milling can be carried out in advance depending on the material. In 2005, the plant was modernised and converted to load cells. Electrical control system: Simatic S7-300 The plant consists of the following units: 1. Mill Lrjdpfx Aijx T Ar Nsien 2. Raw material filling unit 3. Air filter 4. Electrical switchgear

Year of construction: 1988, condition: good (used), machine/vehicle number: 14684/1, suitable for copper cable and plastic recycling Lrodpjnvdq Nofx Aiion

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Lrsdpfsvdu N Ajx Aiijn

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Lrsdpfx Asx R Avveiijn Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Handling trolley  

Year of construction: 2023, condition: new, Rental system Hosokawa Alpine AS 200 Baseline. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without aspirator) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 23 μm 33 kg/h Nifedipine 90% ᐸ 2.4 μm 8 kg/h Progesterone 90% ᐸ 9 μm 20 kg/h Diosmin 90% ᐸ 4 μm 8 kg/h Omeprazole 99% ᐸ 5 μm 3 kg/h Lrjdpfxsm Nbnro Aiijn Cosmetic powder 90% ᐸ 10 μm 15 kg/h A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2022, condition: new, Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Ljdpfjh Utyrjx Aiiorn Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle sizes between 0,5 and 10 mm depending on the feed product. The AFC can be used for mixture homogenization, flakes granulation, disintegration of agglomerates, increasing bulk density and flowability of clumped materials. It´s fitted with a rotating grinding tool which can work in combination with a sieve of choice to adjust the resulting product according to specification. The sieves exchange is quite fast reducing the unit´s downtime. Suitable for different industries such as pharmaceutical, food, chemicals, etc. Material of construction: stainless steel Without wear protection Non gas tight Non Pressure Shock Resistant (NPSR) Scope: Flake Crusher, motor, controls and screens according to requirements

Year of construction: 2024, condition: new, functionality: fully functional, Hosokawa Alpine MZM 1-40 classifier system by Alpine Rentals. Stand-alone lab scale air classifier, perfect for highly precise separation of small batches into a coarse and fine fraction. Adjustable cutting point, ranging from 0,1 to approx. 6 mm. Can be used for sorting and separating different materials. Thanks to the plexiglass cover it is ideal to observe the classification process inside the classifying tube. Technical details Stainless steel, plexiglass and glass Non ATEX, Non Pressure Shock Resistant (NPSR) Air flow 6-60m³/h Throughput approx. 3-30kg/h Maximum feed size approx. 10mm Scope of supply Hosokawa Alpine MZM 1-40 zigzag classifier complete with supporting frame, including feeding bin, cyclone, glass collecting bottles and vacuum cleaner. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Lredewxwwkjpfx Aiisn

Year of construction: 2022, condition: like new (used), Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Ledpfx Ajd S D Uueiijrn Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc. and can be exchanged on the same platform at any time. Dry grinding and classifying Depending on the function module, 1 or 2 identical high-speed motors are used for dry grinding and classifying, except the Piconizer. Wet grinding The wet mill uses a slower running motor with high torque. The drive controller of the motor is located in the platform. Mixing and particle design The batch mixer and the high-energy mixer for particle design use the same slow-running motor with high torque. The motor drive controller is also housed in the platform. THE ACCESSORIES Depending on the operating mode (continuous, discontinuous) and the batch size, numerous peripheral devices such as agitator vessels, dosing devices, product separators, external blowers or barrier pressure systems are available as an option and are designed for specific applications. The machine was operated as a pilot plant. There are also many modules and many accessories available for purchase or rent.

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, Rental Hosokawa Alpine CS 25 compactor system by Alpine Rentals. Technical details Material of construction: - product contacting parts: stainless steel - non product contacting parts: stainless steel/mild steel - non ATEX - Non Pressure Shock Resistant (NPSR) Lrsdpfx Ajvq Rirjiijn Scope of supply Compactor CS25 with 11kW motor and AFC 200 capable of producing briquettes, granulates, pellets and even be used as a roller crusher depending on the fitted rolls (pending availability). The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industries such as minerals, chemicals, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2021, condition: as good as new (ex-display), Rental Unit Lrodpfsf H Azgex Aiijn A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemical or mineral products. Materials up to approx. 3 Mohs can be processed on the UPZ. The 100 UPZ is the perfect mill for the laboratory, research and development of new materials or even small scale production. Thanks to the easy mill’s door opening, that doesn´t require disassemble of other system parts nor use of tools, grinding tools exchange or revision is very quick. It is fitted with a security device that prevents the opening of the machine while in operation. Motor power: 1.5 kW Construction material: stainless steel

Year of construction: 2023, condition: like new (used), functionality: fully functional, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 • Alpine Dry Agitated Media Classifier Mill Pulvis 150 PV • Alpine Aeroplex Spiral Jet Mill 100 AS Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX Lrodpfsr Iig Ssx Aiisn - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel and wear protection - non product contacting parts: stainless steel, plastic (PE-HM) Wear protection: ceramic and Vulkollan (Polyurethane) Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in wear protected design. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP, 50 ZPS, 100 AS and 150 PV

Year of construction: 2024, condition: new, functionality: fully functional, Rental Multiprocess System in stainless steel. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 Characteristics: Lsdpfxeugfn As Aiiorn • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel - non product contacting parts: stainless steel Wear protection: none Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in stainless steel. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP and 50 ZPS. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2022, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Lodsfhmmxopfx Aiisrn Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Materials and surfaces In contact with product: 316 L stainless steel. (1.4404) Ra ᐸ1.2 μm not in contact with product: stainless steel 304 (1.4301) Ra ᐸ1,2μm Drives Three-phase current geared motors Technical data rolls Nominal power (kW): 4,0 Speed (rpm) 3 - 30 voltage: 400 V, 50 Hz Protection class: IP 55 Compacting rollers The rollers for the PHARMAPAKTOR are made of hardened stainless steel. Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls. Roller profile: At your choice roller diameter: 200 mm roller width: 50 mm roller gap: 2.5 mm

Year of construction: 2024, condition: like new (used), functionality: fully functional, Rental Hosokawa Alpine RO 28/40 system by Alpine Rentals. Cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, non gas tight Material of construction: -product contacted parts: stainless steel -non product contacted parts: normal steel Food grade Wear protection: without Scope of supply Ledpfjv Dalpsx Aiijrn Complete Hosokawa Alpine Rotoplex RO28/40 production plant consisting of: mill inlet with safe design for manual feeding, mill with rotor, knifes and sieve for the rotor, including a relays control cabinet everything fitted on a frame, product fines collecting barrel and vacuum cleaner with filter. REMARK: The user must provide an on site operating platform for the operator to safely handle the feed material and feed it in to the mill. This is NOT part of our scope. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2021, condition: new, Hosokawa Alpine Mikropul ACM and ZPS spare parts for your mills ACM 2 - ACM 150 or ZPS 100 to ZPS 630. Other manufacture or types on request. Ledpogn Edlefx Aiiern We are able to deliver spare parts like: Classifier wheels, Liner, complete Bearing Assembly ( new or overhaul ), hammer with carbide face, shroud ring

Year of construction: 1986, condition: good (used), machine/vehicle number: 2057, Hosokawa Alpine ZPS 315 classifier mill Universally applicable for materials up to a Mohs hardness of approx. 3.5 with requirements for very high final fineness with the lowest possible energy input. Classifier mill for high finenesses, cool grinding and flexible production parameters in the fineness range from less than 5 µm to 200 µm Impact beater mill with Turboplex classifier integrated in the upper section for precise particle size limitation Welded construction, grinding tools made of special steel Lrodeqi Hhpspfx Aiion The mill is available complete with accessories, such as: suction filter, rotary valves, cyclone, filter, fan, piping, control cabinet

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment Ledpfx Aioy Uhxkjiern 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: ready for operation (used), * Brand: Voestalpine * Feed opening: 900 x 680 mm. Lrsdoywmmxjpfx Aiijn * Driving: 55 kW E-Motor.

Condition: used, Used Hosokawa Bepex model BH 150 stainless steel cone mill: - Manufacturer: Hosokawa Bepex - Model: BH 150 (nowdays BEXMILL ABM) - Rotor type: Two arm beater. Top belt driven by electric motor 1.5 kW, 1405 rpm, 50 Hz. Max rotor speed 1700 rpm. - Screens: (7) Cone screens type available. Cone screen top diameter approx. 150 mm and bottom diamter 45 mm, cone height 90 mm. - ATEX rating: ATEX 94/9/EG - EN 13463-1/-5, Ex II 2G c T4/II 2DcT Lrsdpozbugysfx Aiisn

Condition: reconditioned (used), Used ACM 15 for sale. Grinding tools are completely new. Bearings are completely new. Lrodpfx Ajzat Iajiien

Condition: excellent (used), Hosokawa Powderplex APP 400 size reduction and screening mill Drive power: 37 kW Motor speed: 3000 rpm Pressure surge resistant up to 10 bar (g) Additional screening wheel In very good, operational condition, directly from production!!! Lrodpfxohbq Ure Aiion

Condition: refurbished (used), Hosokawa Mikropul ACM 10 fine mill / classifier mill with new control cabinet and accessories We are offering a Hosokawa Mikropul ACM 10 fine mill in very good condition - an ideal solution for the precise crushing and classification of powders and granules. Technical data: Lodpfx Aiovn Riaoiern • Model: ACM 10 • Motor power: 9.2 kW • Condition: Very good condition (refurbished), with newly built control cabinet Additional details: • Classifying sieve available: A subsequent classifying sieve is also in stock. • Comparable mills: We have similar/analog mills in stock that work on the same principle as the ACM 10. Advantages of the ACM 10: • Compact design: Saves space in production • Energy efficient: Optimized for lower power consumption • Flexible use: For processing chemicals, food, pharmaceuticals and more Condition and inspection: The machine would be ready for use quickly and can be inspected by arrangement. We also offer technical accessories and spare parts for seamless integration into your production. Contact us for more information or a customized offer.

Condition: used, Used Hosokawa Alpine ZPS 315 for sale. Was used for powder coatings. Lrodpfx Aiswdvt Usijn Includes filter, cyclone, rotary valves, control cabinet, air intake cooler, and much more.

Condition: excellent (used), Year of construction: 1995, Maximum distance between centers: 1,000 mm Diameter over lathe bed: 410 mm Spindle bore: 54 mm Lrsdpfezd S Dasx Aiijn Taper for tailstock: MK 4 Machine weight: approx. 2.1 tons Includes: 3-jaw chuck Includes: Multifix quick-change tool holder Includes: Live center

Condition: good (used), functionality: fully functional, Speed: 21 - 1,500 RPM Maximum turning diameter: 1,000 mm Turning diameter over bed: 520 mm Spindle bore: 71 mm Machine weight (approx.): 2,000 kg Ledpfxezd Smzs Aiiern Equipment: - Coolant system - Chuck guard - Multifix cassette B (8 pieces) - 315 mm chuck - Tailstock, MK 5 - Various intermediate sleeves, centers, and drill chucks