Used Holzprofi 7-Ksm2600Tv-G for sale (54,834)

Condition: new, Machine stand in torsion- and vibration-free design, extremely stable. Sanding unit adjustable up to 45° using a lever. Sanding belt - oscillation with separate gear motor. Height-adjustable sanding table to utilize the entire belt width. Height-adjustable additional table with suction for sanding radii. Kedpjvrvcgofx Ahbsdu With spring-loaded belt tension. Made in EU! Technical data: Table size 750 x 300 mm Table height adjustment 200 mm Belt length 2600 mm Belt width 150 mm Belt speed 20m/sec Oscillation stroke 20 mm Oscillation motor power 0.25 kW Main motor output 3.8 kW S6 400V (3kW S1) Weight 180 kg Included in the price: Adjustable table extension with rollers. Miter stop

Condition: new, Aluminum format sliding carriage with hardened steel guide rods. Telescopic crosscut stop 1500 mm and two stop flaps as standard. Stable extension table for processing large and heavy panels. Parallel stop with micrometric fine adjustment. Inclination of the saw blade up to 45° with reading from a scale. Cutting width on the parallel stop 950 mm. Degree grid on the extension ruler. With electric height adjustment and swiveling of the saw blade. 100% Made in EU (developed, built, quality-tested) Technical data: Format table length 2743 mm Max saw blade diameter 315 mm Spindle diameter 30 mm Max. cutting width on parallel stop 950 mm Max. cutting height, 90°/45° 102 mm/72 mm Motor output 5 kW S6 (4 Kw S1) Extraction nozzle diameter 120 mm Weight 530 kg Kjdpfjvrvddjx Ahbedu Optional accessories: Format table length: 2300 mm; 2544 mm; 2743 mm; 3000 mm Pre-scoring unit Protective hood attached to the side

Condition: new, Aluminum format sliding carriage with hardened steel guide rods. Telescopic crosscut stop 1500 mm and two stop flaps as standard. Stable extension table for processing large and heavy panels. Rip stop with micrometric fine adjustment. Slant adjustment of the saw blade up to 45° with reading according to scale. Cutting width on the rip stop 950 mm. Degree grid on the extension ruler. Kdodpfx Aovrvc Hohbju 100% Made in EU (developed, built, quality-tested) Technical data: Format table length 2300 mm Max saw blade diameter 315 mm Spindle diameter 30 mm Max. cutting width on parallel stop 950 mm Max. cutting height, 90°/45° 102 mm/72 mm Motor output 5 kW S6 (4 Kw S1) Extraction nozzle diameter 120 mm Weight 530 kg Optional accessories: Format table length: 1600 mm; 2544 mm; 2743 mm; 3000 mm or 3200 mm Pre-scoring unit Protective hood attached to the side

Condition: new, Demonstration Machine Aluminium sliding table with hardened steel guide bars. Standard telescopic cross-cut fence 1800 mm with two flip stops. Robust outrigger table for processing heavy panels. Parallel fence with micrometric fine adjustment. Milling spindle and saw blade fully retractable. Interchangeable milling spindle with MK4 mounting. Separate motor for the scoring unit for easy disengagement. 100% Made in EU (designed, manufactured, quality-tested) Technical Data: Circular Saw: - Max. saw blade diameter: 315 mm - Spindle diameter: 30 mm - Max. cutting width at parallel fence: 1100 mm - Max. cutting height, 90°/45°: 103 mm/72 mm - Motor output: 5 kW S6 (4 kW S1) - Extraction port diameter: 120 mm Spindle Moulder: - Spindle diameter: 30 mm - Tilting spindle: 90°/45° - Spindle height adjustment: 175 mm - Spindle speed: 10,000/8,000/6,000/5,000/4,000/3,000 rpm - Motor output: 5 kW S6 (4 kW S1) - Weight: 790 kg With Special Equipment: - Sliding table length 2300 mm, scoring saw, - 4 kW motor, integral fence 500 mm, overhead extraction, - Angle grid on outrigger table Kodpfx Aovrvdqehbodu Optional Special Accessories: - Interchangeable spindle for router - Longer sliding table (2500 – 3200 mm)

Condition: used, machine/vehicle number: G-ADHM115775cP, AD planing machine Holzprofi STÖ410, 410 mm planing width, 4 blade shaft Kdjdpfx Ahsvw Ebisbsu Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Year of construction: 2009, Width 900mm 2bands Kdjdpey I Ul Rofx Ahbeu 1 skate Probe at the input Electrical rise and fall Digital display 380V

Condition: used, 4-way combi Holzprofi K5-32-2.0, year of manufacture 2012, good condition, 320 mm planing width, 3x3 kW, 315 mm saw blade, 2200 mm cutting length, 102 mm cutting height, 2000 mm format table length, 3 knives, 850 kg Kdodpfx Aevrvitehbju Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Ksdpfx Asx H Uctjhbodu Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Condition: new, With 2 eccentric clamps and motor protection. Adjustable end stops for transversal and longitudinal operations. Drilling unit tiltable on both sides Ksdpfx Ahsx H Ucmjbodu Westcott-drill chuck mm with protective cover Smooth running height adjustment of drilling unit by hand wheel Easy and comfortable one hand operation. Stop bar for series usable on both sides. With pin drilling device and mitre fence Technical data: Pin point distances 16, 22, 25 und 32 mm Table dimensions 600 x 320 mm Drilling depth 205 mm Drilling length 250 mm Vertical table stroke 165 mm Tilting of drilling unit on both sides 45° Motor speed 2840 rpm Engine power 3 kW S6 (2,2 Kw S1) Weight 180 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,288 h, functionality: fully functional, machine/vehicle number: 936, workpiece weight (max.): 150 kg, power: 8 kW (10.88 HP), workpiece length (max.): 800 mm, workpiece width (max.): 600 mm, number of support arms: 16, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with an optional support system and can therefore accommodate one large workpiece or a maximum of 16 smaller workpieces on the supports. TECHNICAL DETAILS Turbine power: 8 kW Workpiece size (single workpiece) max.: 800 x 600 mm Workpiece weight (single workpiece) max.: approx. 100 kg Number of positions in the support system: 16 Workpiece size (on support system) max.: 200 x 200 mm Workpiece weight (on support system) total max.: 150 kg Filter data Number of filter cartridges: 2 Total filter area: 20 m² Filter area per filter cartridge: 10 m² Air velocity: 1.25 m/min Compressed air data Compressed air pressure: max. 4–5 bar Compressed air consumption: approx. 7 m³/h Compressed air connection: G 1″ Permissible negative pressure: max. 1,500 Pa Dust container: 20 l Residual dust content in the exhaust air: below 5 mg/m³ MACHINE DETAILS Control unit: Pulse/time: 24 V, 1 phase, 50 Hz Solenoid valves: Voltage: 24 V, 50 Hz Timer: Input/output voltage: 24 V, 50 Hz Kjdpfx Ahezh Nf Aobedu Operating hours: 2,288 h Fan data Air flow: 2,000 m³/h Static pressure: 1,800 Pa Total pressure: 2,000 Pa Power consumption: 2.2 kW Motor power: 1.1 kW Motor voltage: 400 V Motor frequency: 50 Hz Motor phases: 3 phases EQUIPMENT Filter cartridges with 10 m² filter area each Aluminum venturi tubes Solenoid valves, type CA 25 DD Timer CG 03.06/04 Filter group Pressure regulator Pressure gauge 1″ ball valve Dust container, 20 l Fan

Condition: ready for operation (used), Year of construction: 2011, A tray sealing machine for the food industry is offered. Tray formats: Format A X/Y/Z: 267mm/326.5mm/65mm, Format B X/Y/Z: 227mm/178mm/35mm, Format C X/Y/Z: 106mm/145mm/36mm, VG function, Busch R5 vacuum pump. Inspection by appointment possible. Ksdpfx Aey A Sl Dehbsdu

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 5,000 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 130 mm, controller manufacturer: FANUC, controller model: 31i, number of axes: 7, This 7-axis DMG GILDEMEISTER MSL60/7 was manufactured in 2012. It features a spindle speed of 5,000 rpm and a spindle bore of 60 mm. The machine includes a counter spindle and driven tools, enhancing its versatility for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the DMG GILDEMEISTER MSL60/7 turn-mill centre we have for sale. Contact us for further details. • Spindle bore: 60 mm • Working hours: 28,000 h Kdsdpfoz R S Dyox Ahbou Additional equipment • Bar feeder: IEMCA • Chip conveyor: Yes Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2019, machine/vehicle number: SPOV-3SC09, Manufacturer: Unitherm Model: SSOC-15.75-1.6-16T-A-G Year: 2019 Condition: Used Serial Number: SPOV-3SC09 Stock Number: 3398 Mini spiral oven Type: SSOC-15.75-1.6-16T-A-G Serial number: SPOV-3SC09 Year of construction: 2019 Model: North - South Execution: Right hand execution Tiers: 16 pieces Product gap: 55 mm Belt width: 400 mm Heating: natural gas, 352 kW Gas pressure: 138 - 480 mBar Temperature: max 232 °C Steam: 270 - 680 kg/h Power: 3 x 380V, 50Hz, 46A Dimensions: 6750 x 2600 x 4000 mm Including belt washer and CIP system Mini spiral freezer Type: SSF-16-1.6-12T-GLYC Serial number: SPFZ-S01 Year of construction: 2013 Model: North - South, top-down Belt width: 400 mm Tiers: 12 pieces Product gap: 105 mm Refrigerant: Glycol Cooling power: 70kW Steam: 113 kg/h (CIP) Water: 227L/cycle (CIP) Power: 3 x 380V, 50Hz, 57A Kdedpozim Rlsfx Ahbeu Dimensions: 5400 x 2600 x 3150 mm Including CIP system

Year of construction: 1990, condition: reconditioned (used), Year of renovation: 2010 Output kVa: 1375 Volt: 6300 V Total weight: 74000 kg Kdjdpfx Asini Hwshbju Other information: 1,16 MW Diesel Generator, Completely renewed

Condition: used, Year of construction: 2006, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° Kodpfx Ahsvxwr Asbsdu work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10,00 to dimensions of the machine ca. 6,10 x 4,40 x 3,30 m coolant filtering unit Hoffmann HSF 100 V

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: M .415619, total length: 5,600 mm, total width: 1,300 mm, total height: 1,950 mm, overall weight: 1,500 kg, GPE/100-7″-UV Automatic machine for printing with registration on travel mugs This machine is in excellent condition Also comes with a set of jigs to print the travel mug with an handle Kdjdpfx Ahj Aazuqjbsu with the UV dryer Print cure instantly

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Kdjdpfx Ahsq Dzi Tjbsu Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Year of construction: 2005, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm diameter of tools min 69,85 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control SIN 840 D SIEMENS Kdsdpfxoynmm Ee Ahbju total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available

Condition: new, Holzprofi bandsaw blades are made with high-quality materials and are of carpentry quality! They offer high cutting performance and reliability, making them ideal for workshops and businesses that value quality and precision. Advantages and features: - High-quality bandsaw blade - Tooth tips hardened for long life and precise cutting Kdjdpfozq Dd Sjx Ahbju Length: 1750mm, suitable for Hans Schreiner ZHBS, among others 2050mm, suitable for Holzprofi GM 310, among others 2400mm, suitable for Hans Schreiner BS 350, among others 2495mm, suitable for Hans Schreiner BS 350 from model year 2022, among others 2560mm, suitable for Holzprofi SBW3501, among others 2630mm, suitable for Hans Schreiner 12-BS350B, among others 3345mm, suitable for Hans Schreiner HBS-HS400, among others 3430mm, suitable for Hans Schreiner HBS 450, among others 3550mm, suitable for Holzprofi GM 500, among others 3607mm, suitable for Hans Schreiner HBS480, among others 3632mm, suitable for Holzprofi SBW4800, among others 3861mm, suitable for Holzprofi SBW5300, among others 3980mm, suitable for Holzprofi HBS 550, among others 4080mm, suitable for Hans Schreiner HBS-HS 610, among others 4230mm, suitable for Holzprofi GM 620, among others 4318mm 4600mm, suitable for Felder SBW6300, among others 4600x35mm, tooth pitch 12mm 4600x35mm, tooth pitch 22mm 4600x35mm, tooth pitch 22mm X-Cut 5020mm, suitable for Holzprofi FBR700, among others 5070mm, suitable for Holzprofi FBR700, among others 5600mm, suitable for Holzprofi FBR800, among others Width: 06mm (partially) 08mm 10mm 16mm 20mm 25mm 30mm (partially) All other sizes are also possible! From 16.00 EUR Prices depend on length and design. If you have any questions about the correct length/width for your machine, please contact us, we will be happy to help. Tel.: 00 43 7613 5600

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Working area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis: 350 mm Table adjustment: 8 ° degrees X-axis: 190 mm Grinding spindle Grinding wheel diameter max.: 500 mm Grinding wheel width max.: 80 mm Grinding wheel bore: 127 (203) Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Grinding wheel protection cover: D500 x 80mm Workpiece spindle Speed: 1 - 2,000 rpm Workpiece spindle mount: MK4 Tailstock Tailstock quill mount: MK3 Tailstock quill stroke length: 30 mm Cylinder fine adjustment range: ± 0.04 Kedovz Snkopfx Ahbjdu Equipment Paper belt filter system Rinse gun Mechanical fume extraction

Condition: as good as new (ex-display), Demonstration Machine The professional brushing machine from Holzprofi is designed for final surface finishing tasks, including fine sanding, structuring, ultra-fine sanding, and other finishing operations. The surface result depends on the tools used. Standard Features: - 2 height-adjustable rubber-coated pressure rollers - Height scale with roller height display - Electrically adjustable roller height - Automatic star-delta switch - Machine is CE compliant Technical Data: Working width: 400 mm Max. tool diameter: 300 mm Mounting shaft diameter: 40 mm 2 feed speeds: 4.5 / 9 m/min Motor output S1 at 100% duty: 5.5 HP (4 kW) Max. workpiece height: 300 mm Kedsvrvwqspfx Ahbsdu Brush roller RPM: 1140 rpm Brush diameter: 120 - 300 mm Machine dimensions (L x W x H): 1500 x 1000 x 1750 mm Weight: 435 kg Additional equipment available on request Extras not included in the price (Representative image)

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm Kjdpfszg Dx Uox Ahbodu - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: as good as new (ex-display), Demonstration machine Standard equipment: Solid machine frame Long feed table Optimal price/performance ratio Noise protection hood Digital display of width and height settings Kdedpfxevrvxbs Ahbsu 100% Made in EU (developed, built, quality-tested) Technical data: Planing width (finished size) min./max. 25 - 180 mm Planing height (finished size) min./max. 10 -105 mm Min. workpiece length (individual workpiece) 350 mm With group feed 250 mm Feed table length 1700 mm Cutter shaft speed 6000 rpm Spindle diameter 40 mm Planer head diameter 120 mm Clamping length of vertical spindles 120 mm Clamping length of horizontal spindles 190 mm Feed speeds 6/12 m/min Feed roller diameter 120 mm Motor power feed 0.8/1.1 kW Motor power horizontal spindles 4 kW + 4 kW Motor power vertical spindles 4 kW + 4 kW Motor output at 100% duty cycle 17.1 kW Extraction connection: 2 x 120 + 1 x 150 mm Weight approx. 950 kg Prices subject to change, errors, printing and typesetting errors reserved

Condition: as good as new (ex-display), Demonstration machine Year of manufacture: 2022 The new FSN jointer-planer combination machine stands out with its robust construction, heavy-duty cast iron tables with ground surfaces, and modern handling. The machine is space-saving and extremely comfortable when switching from jointing to planing mode. The jointing fence is adjustable up to 45°. The substantial thicknessing table guide ensures excellent planing quality. A mechanical digital display allows for precise reading of the thickness setting. CE compliant, 100% Made in EU (designed, built, and quality-tested) Kdodpfx Ahjvrvncjbju Jointer: Table size: 1500 x 320 mm Max. depth of cut: 5 mm Cutterhead diameter: 100 mm Number of knives: 3 pcs Thickness planer: Table size: 700 x 316 mm Max. depth of cut: 4 mm Feed speed: 8 m/min Motor output: 3.8 kW S6 (3 kW S1) Weight: 360 kg Accessories not included in the price (Sample image)

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Technical condition: normal Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift, Kdsdpfx Ahoytkkfobeu