Used High Voltage Test Device for sale (43,531)

Condition: used, High-voltage tester, high-voltage test device, high-voltage tester for HV, PE, IS measurement Test console, test station, measuring station, test device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The device PE/IS/HV / 91-3J.3 is used to measure voltage strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Noise suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Lasdpsd Dc Unjfx Albeh Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57820 and 57821.

Condition: used, Available quantity: 4 units “Removed from a production facility of an automotive supplier, professionally dismantled” Designation: DC high-voltage/insulation test module GH-200.11A Manufacturer: STAHL Prüftechnik Application: Checking and determining voltage and insulation strength Technical data: - Test voltage (setpoint specification): 100 ... 7500 V DC - Control deviation/measurement accuracy: 0.1 % ± 2 V of the setpoint - Rise rate (ramp): 50 V/s - 30 kV/s - Discharge internal resistance: 100 MΩ - Measurement range: 0 ... 7500 V DC - Output isolation: ± 1500 V max. voltage difference between HV 0 output and PE connection - Trigger current: 1 µA ... 10 mA - Measurement ranges: - Range 1: 0 ... 10 mA - Range 2: 0 ... 200 µA - Resolution: 1 nA - Measurement uncertainty: Lajdpfjzg Ihgsx Alboh - Range 1 (10 µA to 10 mA): < 0.5 % of the measured value ± 0.5 µA - Range 2 (0.5 µA to 200 µA): < 1.0 % of the measured value ± 0.01 µA - Discharge energy: < 350 mJ Interfaces: - Ethernet (Modbus protocol) - Optional: Profinet, EtherCAT - Optional: 2-channel safety circuit Special features: - Safety current limited to 10 mA - Precise insulation measurements in the GΩ range through guard connection - Compact industrial design for installation in automated testing applications - Voltage supply with wide-range input

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3).   Technical details   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A   Lasdpjziiz Hsfx Albeh Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 Lasdpfxoxqxt Is Albsh - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: used, HEIDEN – COMPETENCE IN POWER HEIDEN Infeed Test System ES1.3 High-performance DC test system 500 kW / 3x400V / 1000V 800A Year of manufacture: 2015 · IGBT/PWM · HTS14 digital controller · industrial DC test system Multi-part switchgear system for industrial testing and supply applications with power, control, measurement and monitoring technology. Technical data: Manufacturer: HEIDEN Model: Infeed Test System ES1.3 System type: 3870; Series: HTS14-500-1002 Device No.: 3870.550.01.400; Serial No.: 332732 Year of manufacture: 2015; Operation: DB (continuous operation) Output rated power: 500 kW Efficiency at rated load/voltage: 95 % Power loss: 27 kW; Noise: max. 79 dB(A) @ 1 m Input: Mains: 3/PE/400 V AC ±10 %; 50 Hz ±6 % Power consumption: 526 kVA; Power factor: >0.99 Maximum input current: 854 A @ 400 V Protective fuse: 3× gL/gG 1000 A Cable: 3×185 mm²/phase; PE: 3×95 mm² Output / Control: DC: 10–1000 V adjustable; ±800 A, adjustable current limit Rated power: 500 kW; Cable per pole: 3×150 mm² Measurement accuracy/-resolution U/I: 0.1 % fs / 16 Bit ADC each Control accuracy U/I: 0.1 % fs each Static setpoint tolerance U: approx. max. ±0.1 % fs; I: max. ±0.1 % fs Residual ripple U (ohmic load)/I: 0.1 % fs eff. each Current rise time 10–90 % Iₙ: typ. ;2 ms (standard conditions) Power / Control: HEIDEN HTS14, LCD; Transistor rectifier, PWM, galvanically isolated; IGBT technology IGBT power components: 3×1000 V DC (bill of materials ES1.3) Digital IGBT controller/fast DC controller Storage chokes: 3×1200 µH; thermally 270 A; saturation 400 A DC contactors: 4× single-pole, coil 24 V; Filter charging unit Cooling: forced air Measurement / Safety: LCD panel; Analog display 0–1000 V DC Current transformers and shunts: 600 A/60 mV, class 0.5 Isometer IRDH275B-435; AGH150W up to 1100 V DC Mushroom head PNOZmulti 2 with extensions (bill of materials) Protection class 1 (EN 60950); IP20 (EN 60529) Protective conductor current: ;5 % Iₙ, typ. 50 mA Lasdsz Uc Sbspfx Albsh Communication / Features: CAN, Ethernet; CANopen (safety control) Remote indicator relays; Control power supply 24 V DC/10 A (bill of materials) Metal cabinets with ventilation; Operating, power, and control electronics HTS14-LCD, Analog display, Control elements Cable entry at the bottom; Door hinge on the right (standard) Dimensions / Weights: W×D×H: (1400+1200+1200)×1000×2000 mm ES1.1: 1900 kg; ES1.2: 650 kg; ES1.3: 1050 kg Total: approx. 3600 kg; RAL 7035 Wall distance min. 200 mm; Ceiling min. 300 mm Operating conditions: 0 to +40 °C; RH 5–85 % without condensation With cabinet heating up to 95 % RH without condensation Installation height max. 1000 m above sea level at rated load; Air pressure min. 870 hPa Restricted access; non-flammable base (e.g. concrete) Pollution degree 2 Notes: System data type 3870; Components/quantities according to the bill of materials. 500 kW applies to the entire system. 1000 V and 800 A are not confirmed to be available simultaneously. Cable cross-sections apply to the documented installation conditions. Scope of supply: 1× HEIDEN Infeed Test System with HTS14 and existing cabinet/power components as shown in the pictures. Tools, machines and items not explicitly mentioned are not part of the sale.

Condition: used, Atlas Xenon Weather-Ometer / Weathering Test Device Atlas Ci3000+ Xenon Weather-Ometer Xenon test device for artificial weathering and light aging For sale is a used Xenon Weather-Ometer from Atlas Material Testing Technology LLC. The device is suitable for weathering tests, light aging, material testing, quality control, research and development, as well as aging tests for plastics, paints, coatings, and materials. Technical data Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Device type: Xenon Weather-Ometer / Weathering Test Device Year of manufacture: 12/2010 Light source: Xenon arc lamp Lamp rated power: 4,500 W Operating range Xenon lamp: 1,700 – 4,500 W Device model according to display: Ci3000+ W Sample sensor 1: Black standard Sample sensor 2: Black panel Light sensor 1: CI 300 – 400 nm Light sensor 2: CI 420 nm Mains connection: 220 / 380 V Frequency: 50 Hz Connection type: 3/N/PE Rated current: 50 A Power consumption: 9.5 kW Control voltage: 24 VDC Compressed air supply required Operating pressure: 80 – 100 PSI (552 – 689 kPa) Compressed air consumption: approx. 4 CFM (0.11 m³/min) Dimensions: approx. 950 x 730 x 1830 mm (W x D x H) Required footprint: approx. 1050 x 2030 mm (W x D) Weight: approx. 404 kg Minimum distance exhaust hood: approx. 102 mm to 152 mm Equipment Touchscreen control panel Xenon burner Test chamber with sample rack Black standard sensor Black panel sensor CI 300 – 400 nm light sensor CI 420 nm light sensor Water-cooled lamp system Exhaust connection Interface connections Integrated humidification system Documentation / Documents as shown in the pictures Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Documentation as shown in the pictures Accessories as shown in the pictures Areas of application Artificial weathering Light aging testing UV and Xenon testing Material testing Plastic testing Paint and coating testing Colors and pigments Textiles Packaging Automotive industry Construction and materials testing Quality assurance Research and development Condition Used Good optical condition Optical condition as shown in the pictures Scope of delivery 1x Atlas Ci3000+ Xenon Weather-Ometer Lasdpfx Alozf D Rnjbeh Available accessories as shown in the pictures Available documentation as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight shipping possible. (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Atlas Type: Heraeus Atlas Xenotest BETA LM Weathering test device Heraeus Atlas Xenotest BETA is a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOSENSIV gearbox Control of lamp power in W/m² XENOCHROME 320 35-100 W/m² Specimen chamber temperature up to 80°C, controlled Measurement sensors at specimen level XENOSENSIV E(300-400 nm) Humidification / irrigation Water supply with integrated water tank Specimen chamber temperature: Ambient - 80 °C Black standard temperature: Surface - 130 °C Relative humidity: 10 % - 95 % Electrical version: 3/N/PE AC 400V ± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12 kVA Rated power of the xenon lamp 2200 VA Power of the xenon lamp 2800 VA Rated current 16A Lamp current max. 20A Dimensions: Width 900 mm x Depth 1200 mm x Height 1800 mm Laedpfx Alozdtkuobjh Maximum specimen area 4000 cm² Weight: approx. 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Switch Testing Device - 3x test stations for appliance switch testing - Voltage: 0–600V AC / DC - Current rating: max. 40A Lsdpfx Alox I Ef Ujbsah - Operation of test switches via pneumatic cylinders - Testing with resistive and inductive loads according to EN 61058 (VDE 0630) - 1x thermal chamber (oven) for testing at ambient temperatures up to 125°C - Testing of appliance switches with rated data 250Vac / 16(4)A / 125°C Buyer responsible for disassembly!

Condition: used, Weiss Type: SC 450 Weiss corrosion testing device / salt spray testing chamber for corrosion tests, salt spray tests, and condensation water tests with Liebisch / Weiss control system Data according to the nameplate: Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Device No.: available Electrical data: Voltage: 1/N/PE AC 230 V ±10% / 50 Hz Rated power: 2 kW Rated current: 8.7 A Test chamber data according to manufacturer's documentation: Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions according to manufacturer's documentation: Height with hood: approx. 1370 mm Laodpfxszbatro Alboh Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Technical data: Salt solution tank: approx. 180 liters Temperature range for salt spray test: 5 K above ambient temperature up to +50 °C Temperature range for condensation water test: 5 K above ambient temperature up to +45 °C Temperature stability over time: ±1 K Compressed air: min. 4 bar / max. 10 bar Weight empty: approx. 180 kg Control / Operation: Liebisch Labortechnik control panel S!MCON/32 control and regulation unit Color touch panel Digital setpoint and actual value display Operating and error display Programmable test sequences Testing options: Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Corrosion test Material test Surface test Quality assurance Equipment: Corrosion-resistant polyethylene housing GFK test chamber Acrylic glass nozzle in the spray nozzle Heated compressed air humidifier Flow and dosing system for salt solution Salt solution storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Exhaust connection Condensate drain Condition: Used equipment from industrial use. Optical condition according to the pictures. Inspection and testing on site are possible after arrangement and are expressly desired. Scope of delivery: (See picture) Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Liebisch Type: SKBWF 1000 A-TR Liebisch Constamatic Corrosion Testing Device Salt spray, condensation, and combined testing device with automatic control Data according to the nameplate: Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Test chamber: Test chamber volume: approx. 1000 liters Internal dimensions according to the data sheet: Width: approx. 1535 / 1425 mm Depth: approx. 800 / 780 mm Height: approx. 660 / 650 mm External dimensions according to the data sheet: Width: approx. 2600 mm Depth: approx. 1120 mm Height: approx. 1210 mm Electrical data according to the nameplate: Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to the nameplate: S Watt: 2800 W K Watt: 2150 W B Watt: 500 W W Watt: 1700 W Technical data according to the data sheet: Max. test specimen load: 10 kg per level Test solution reservoir: approx. 150 liters Distilled water consumption humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling for bottom trough system: approx. 15 liters Testing procedures: DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D Lsdezba N Topfx Albjah VW PV 1210 and other corrosion and combined testing procedures Equipment: Automatic control Touch panel / control panel Test chamber made of GRP Temperature test chamber connections Humidifier connections Connections for relative humidity Air pressure connection, two-component nozzle Flow control, test solution Test specimen grids / insert grids Test specimen holders NaCl test solution supply Deionized water supply Compressed air connection Weight: 450 kg Condition: Used equipment from industrial use. Optical condition according to the pictures. Inspection and testing on site are possible by arrangement and are highly recommended. Condition: used Scope of delivery: (See picture) Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will gladly answer further questions by telephone.

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Included in the set: Bosch high-voltage inverter Original Bosch transport case Foam transport protection Ledpfjz Snd Ssx Albjah Bosch transport documentation Test and quality control reports Condition: 100% technically functional. Very good visual condition. Complete with original documentation and transport case. Sold exactly as shown in the pictures.

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. Ledpszg Er Aefx Albsah We will be happy to answer any further questions by telephone.

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Important note: "The table shown in the photos is not included in the sale."   Condition: used Lasdezii Akopfx Albsh   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Lodpfx Aszil T Eelboah Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Professional test cover (prufhaube) from the renowned German manufacturer SCHLEICH – model 13-R2. The device is designed for laboratory and industrial use, ensuring maximum safety during high-voltage electrical testing. The unit is in factory-new, warehouse condition – it has never been used. ⚙️ Technical specifications: manufacturer: SCHLEICH (Germany) model: 13-R2 type: test cover / prufhaube year of production: 04.2023 serial number: 21942 country of origin: Germany ✅ Key features: professional test zone (“forbidden zone”) transparent cover – full process control safety system (locks / sensors) robust industrial construction high manufacturing quality – made in Germany ideal for HV/electronics/production testing 📦 Condition: Lsdpoz Smwdjfx Albsah New – warehouse stock, unused. May have minimal storage marks. 📸 Included: device as shown in the pictures

Condition: used, Universal Shaker Accessories / Clamping Devices Lodpfx Aozpya Hjlboah Universal Shaker Accessory Kit Precision clamping devices, angle adapters, adapter elements, and holding devices for vibration test benches, vibration tests, and special designs For sale is a used accessory kit for an electrodynamic shaker or vibration test bench. The kit consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, holding elements, precision chucks, and other accessories for vibration tests. Ideal for test specimen mounting, special designs, and customized test setups. Technical data: Manufacturer: unknown Type: Accessory kit for electrodynamic shaker / vibration test bench Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Components: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Holding and fastening elements Other accessories as shown in the pictures Features: Solid aluminum construction Precision-engineered components Threaded holes and clearance holes Universally applicable Clamping devices Angle adapters Adapter elements Clamping blocks Accessories as shown in the pictures Applications: Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen mounting and special designs Scope of delivery: Complete accessory kit as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Other accessories as shown in the pictures Weight: 600 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present. Only the accessories shown in the photos are being sold. The table shown in the photos, and any other items not explicitly mentioned, are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Some of the technical specifications on the nameplate are damaged and not completely clearly legible. Equipment: RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Repair of existing vibration testing systems Supply of replacement and assembly components Reconstruction and repair projects Scope of delivery: Laodpfx Aoz Iqh Aolbsh 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Weight: approx. 700 kg Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No warranty for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Resato HBU-B160 Gas High-Pressure Workshop Testing System In the oil and gas industry, everything revolves around the extraction of crude oil and natural gas. One of the challenges is to optimize the use of the plants to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components used for oil and gas extraction. By injecting a chemical fluid, the well is stimulated. With the controller, high-pressure systems control and regulate counter-pressure and fluids. In this way, oil and gas can be extracted more safely. Laodpfx Ajr Hmihelbeh Manufacturer: Resato HBU Testing System Type: HBU-B160 Max. Pressure: 200 bar Max. Capacity: 1570 cc Max. Pressure: 7 bar 2 x Gas cylinder holders 3 x Gas cylinder trolleys Digital control panel missing You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Testing console, testing station, measuring station, testing device, measuring device, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage testing device PE/IS/HV SCT 42 / 91-3J.3 is used for measuring voltage resistance, insulation resistance, and the voltage drop of the protective conductor, in accordance with VDE0113 or IEC standards, as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Supply voltage: 230 VAC Supply frequency: 50 Hz Rated current: 1 A Laodjf Axn Aspfx Alboh Interference suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57819, 57820 and 57821.

Condition: used, H. Köhler KG Kesternich Testing Device / Corrosion Test Chamber H. Köhler HK 320 BF Kesternich Testing Device Corrosion test chamber for SO₂ corrosion tests For sale is a used corrosion testing device from the manufacturer H. Köhler KG. The device is used for carrying out Kesternich tests under a sulfur dioxide-containing atmosphere and is suitable for corrosion investigations on materials, surfaces, and coatings. Technical data Manufacturer: H. Köhler KG Type: HK 320 BF Device type: Kesternich testing device / corrosion test chamber Test chamber volume: approx. 300 liters Internal dimensions: approx. 725 x 500 x 750 mm External dimensions: approx. 1070 x 570 x 1970 mm Temperature range: RT +5 °C to 60 °C Expandable to approx. 75 °C according to manufacturer's specifications Power connection: 220 V / 50 Hz Power consumption: 1,000 W Compressed air supply: approx. 4.5 - 8 bar Equipment Stainless steel test chamber Large viewing windows Front door with locking mechanism Test specimen carrier / frames SO₂ gas system Pressure gauge Manual controls Base frame with storage area Areas of application Corrosion testing Coating testing Material testing Quality assurance Automotive industry Research and development Condition Lajdpfx Alezclxvjbsh Used Signs of wear and tear due to age and use Optical condition as shown in the pictures Scope of delivery as shown in the pictures Scope of delivery 1x H. Köhler HK 320 BF Kesternich testing device Accessories as shown in the pictures Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Laedpfxozhadco Alboh Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, SHI Machines Type: BlueBox As good as new, with only 250 operating hours! Technical data: Power: 120 kW Torque: up to 470 Nm Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Lajdpoy Tg R Nofx Albjh Accessories, etc.: 1 clutch 120 - steel, incl. adapter Clutch size: 100 Max. speed: 7,300 RPM Max. torque: 1,000 Nm 1x adapter 1x clutch steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter mounting tool Clutch 120 - CFRP, incl. adapter Max. speed: 8,500 RPM Max. torque: 720 Nm Adapter mounting tool CISPR 25 test table made of wood on wheels for EMC BlueBox 120, size 2500 x 1000 x 900 mm Loadable up to max. 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2020, condition: like new (used), functionality: fully functional, MED-CONT MODULAR SYSTEM Originally custom-built for medical device manufacturing, the MED-CONT Modular System is a turnkey, relocatable modular technical facility offering approximately 100 m² of high-quality laboratory, production and office space. The system is ideally suited for: Medical device manufacturing Biotechnology and life science companies Electronics manufacturing and assembly Research & Development (R&D) centres Universities and research institutes Start-ups and scale-up companies Pilot production and prototyping Quality control and testing laboratories Pharmaceutical manufacturing support Clean assembly and light manufacturing Contract manufacturing (CMO/CDMO) Engineering and automation companies Humanitarian and disaster response projects Military medical and technical field operations Mobile laboratories and temporary technical facilities The system comprises three 40' High Cube CARU ISO technical containers and one 20' office/administration container, providing a fully integrated and relocatable working environment that can be deployed wherever high-quality technical space is required. Key Features Approx. 100 m² modular technical facility 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Fully insulated construction Heating and air conditioning (HVAC) 220 V / 380 V EU electrical installation High-quality LED lighting Ethernet network infrastructure Indoor-stored, outdoor-deployable Modular configuration – containers can be connected or operated individually Built in 2020 Excellent condition Fully functional Typical Applications Medical device manufacturing Electronics assembly Laboratory operations Pharmaceutical applications Lasdpfoznmvrox Albsh Research & Development Pilot production Start-up manufacturing Quality control laboratories Corporate innovation centres Technical training facilities Mobile production facilities Mobile technical support centres Humanitarian and disaster response projects Military field laboratories Office Container The integrated office container provides a comfortable administrative workspace featuring: Office area for up to four workstations Meeting table for 5–6 people Heating, cooling and Ethernet network connection Ideal for administration, engineering, project management and customer reception Included in the Sale The sale includes the complete MED-CONT Modular System, consisting of: 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Additional laboratory, production and utility equipment is available by separate negotiation. Business Advantage The MED-CONT Modular System represents a cost-effective alternative to constructing or refurbishing conventional laboratory and technical facilities. It enables organizations to establish high-quality laboratory, production and office space within a fraction of the time required for traditional construction, while maintaining the flexibility to relocate or expand the facility as operational needs evolve.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon High Capacity Stacker H1/J1” finishing machine Item for sale: 1 x Canon High Capacity Stacker H1/J1 Condition: This offer is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Compatible with various Canon imagePRESS models, including the C650/C750/C850, C710/C810/C910 and C8000VP/C10000VP. Laedpfxsz Ixzqj Albeh The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: ready for operation (used), Reicherter Wolpert Hardness Testing Machine / Hardness Tester Manufacturer: Reicherter Model: Briro VA II Test Loads: 50 – 100 kgf, 62.5 – 187.5 kgf, 100 – 250 kgf Manufacturer: Wolpert Model: Dia Testor 2n Throat Depth: 150 mm Test Area Height: 300 mm Brinell (ISO 6506): 5 / 10 / 15.625 / 30 / 31.25 / 62.5 / 187.5 / 250 Vickers (ISO 6507): 5 / 10 / 20 / 30 / 40 / 50 / 125 Accessories: See photos for details You are welcome to come for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Requirement: a valid VAT ID number. Subject to prior sale. Lodpfxex U Tlvs Albsah Visit our shop and check out our other offers. Stated company names and trademarks are the property of their respective owners and are used only for identification and description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.