Used Hess Expert for sale (1,952)

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Lsdpfx Aot Tqy Ejncsaa Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 1991, functionality: fully functional, total width: 2,000 mm, total height: 2,150 mm, total length: 2,450 mm, overall weight: 4,200 kg, power: 25 kW (33.99 HP), input voltage: 380 V, control type: manual, degree of automation: manual, actuation type: electric, Number of sanding units: 4 pcs Sanding width: 190 mm Lsdm U H Nfet Tqy Eofjrw Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry Lsdpfx Anjxzbdkoceaa - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. The Feeding mats have been recently changed

Condition: used, Year of construction: 2017, Rotary Indexing Table Ljdpfx Anoyl Swwocjaa Manufacturer: Expert Tünkers Model: EDX810/0250/8 Year of manufacture: 2017 8-station table (45° indexing steps)

Condition: used, Year of construction: 1979, Press length: 3000 mm Press depth: Vertical pressing elements: 6 Horizontal pressing elements: Pressure system: pneumatic Ljdpey A Hkhjfx Ancoaa Pressing pressure: per cylinder Cylinder stroke: mm Hold-down device: no Machine length: 2700 mm Machine width: 1000 mm Machine height: 1400 mm Weight:

Condition: used, Year of construction: 1993, pressing area: 3000mm x 1900mm pressing units vertical: 3 pressing units horizontal: 2 pressing system: elctro - hydraulic machine length: 3500mm machine width: 1000mm Ljdoy A Hkzopfx Ancoaa machine height: 2600mm waight: ca. 900kg

Year of construction: 2002, condition: like new (used), functionality: fully functional, L x W x H: approx. 12,1 x 3,0 x 3,25 m Ljdpellvpzsfx Ancjaa Volume: 55 cbm capacity: approx. 150 m³/h 6 dosing-/discharging-screws - pair driven each 11 kW weight: approx. 15 t.,

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: Ledpewyda Ujfx Ancjaa • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: as good as new (ex-display), Year of construction: 2013, -for manual grinding parts -Power: 0.75 kW -Stepless speed adjustment -Supply: 230 V -Demonstration machine built in 2013 Lsdod Ealhjpfx Anceaa -incl. wheels K150 / K180 / K220 -Weight: 120 kg

Condition: excellent (used), Year of construction: 1984, Oil-hydraulic frame press Type: Hydro Year of manufacture: 1984, 1.1 kW Weight approx. 1500 kg 3 vertical and 2 horizontal beams Ledpfx Ansv Im Hnjcoaa Pressing dimensions: 4000 x 2550 mm Frame size: 4900 x 800 x 2500 mm Clamping beam size: 2850 x 800 x 500 mm Transport available at additional cost!

Condition: good (used), Year of construction: 1989, HESS JUNIOR grinder year 1989, max. grinding width approx. 180 mm, height approx. 160 mm Lodpsyw R I Hefx Ancoaa price 3,000 €

Year of construction: 1972, condition: used, Working length up to: 3900 mm hydraulic drive: 220/380 V, 1400 rpm, 0,75 kW Space requirement: 600 x 4650 x 1000 mm Weight: approx. 250 kg Ledobnnyispfx Ancsaa in mobile version

Condition: used, HESS RH500 1998r Ljdpfxoyx Hx Rs Ancjaa control panel 2 moulds hydraulics conveyor

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade Ljdpfxoif Ek Rs Ancoaa • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife Lajdpfxofnlkwo Ancea • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Lsdpfx Anefhgvwoceaa Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: Lasdpfxowgc I Rj Ancja • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Lodpfexgvwpex Anceaa Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Year of construction: 2024, condition: ready for operation (used), This EXPERT cut Expert ecocam 2 was manufactured in 2024. It features a high positioning speed of 90 m/min and can handle cutting heights up to 100 mm. The machine operates on a PC-based NC software and supports various tool options including electric oscillating knives and driven circular knives. Ideal for cutting leather, textiles, and foams. For more information about this machine, please reach out to us. Machine Benefits Technical Machine Benefits • Positioning speed: 90 m/min / cutting height: standard: up to 50 mm / special version: up to 100 mm / repeat accuracy: ±0. 25 mm / precision: 0. 1 mm • Material layers: single layers or low layers • Electrical requirements: operating voltage: 400 vac, 50/60 hz / current: 63-125 a / control: pc-based nc software / compressed air: standard: 6. 0 bar / 200 l/min / for pneumatic knives: 8. 5 bar / 600 l/min • Working area (standard sizes): maximum size: 7500 x 3200 mm / further options: 3500 x 2100 mm, 5500 x 3200 mm, etc. / customization: customer-specific sizes possible Ljdox D Nnpopfx Anceaa • Tool options: fot: electric oscillating knife (up to 15000 oscillations/min) / prt: driven circular knife (up to 11000 rpm) / kct: kiss-cut tool (gentle on the surface) uct: universal cutter (tangentially controlled) / v-cut: angle-cut knife / milling head: with suction device • Nest expert: optimum material utilization / pattern expert: cad template management / order expert: erp connection (e. G. , sap) / pick-up expert: visual sorting aid • Areas of application: cutting of leather, technical textiles, foams, plastics, rubber, composite materials, prepregs, sealing materials, foils, cardboard

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 Lsdpfxswrn Iys Ancoaa (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Features and technical data: - Electro-hydraulic - Automatic final pressure release and follow-up switching for constant pressure maintenance - Central pressure beam with quick-adjustment cylinder, pressure cylinder, and abutment - Additional horizontal pressure cylinder - Press area approx. 3000 x 2250 mm - External dimensions 4000 x 2750 x 850 mm Lodpeyq T Hwofx Anceaa - Equipped with 3 horizontal pressure cylinders - Equipped with 2 vertical pressure cylinders - Cylinder stroke 150 mm - Pressure force per cylinder: 2000 kp at 100 bar - Working pump pressure capacity: 100 bar - Support and pressure plate depth: 100 mm - Electric connection: 1.5 kW Availability: short-term Location: 63934 Röllbach

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. RAW MATERIAL DIMENSIONS: Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm WATERJET CUTTING MACHINE: cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger) Lodpfx Aeytp U Ajnceaa

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Drill, HESS door handle. Single-unit with pneumatic clamps. For PVC and ALU windows. Lajdpfsv H E Alex Ancoa

Condition: used, Year of construction: 1988, - Grinding width: 190 mm - Grinding height: 4 - 150 mm - 2 grinding units - Belt speed: 25 m/s - Feed speed: 5 - 25 m/min - Sanding belts: 1850 x 200 mm - Electrical connection: 400 V, 3/N, 50 Hz Ljdpoymnz Uofx Anceaa - Ex stock

Condition: used, Year of construction: 2017, working width max. 240 mm Sanding height max. 140 mm weight ca. 2200 kg Lsdpsxwtwusfx Ancsaa

Condition: new, Year of construction: 2021, EXPERT EL390/1301 Vertical linear axis for loads with a total weight of up to 2000 kg per unit Laodpfx Aneu Hklcocea Year of production: 2021 More units available