Used Hauk Fzz 95 for sale (2,885)

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Knjdpezkh S Hefx Accsc Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Feed type: stepless Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim

Condition: used, functionality: limited functionality, Year of construction: 2018, operating hours: 16,914 h, load capacity: 4,000 kg, lifting height: 4,040 mm, fuel type: gas, mast type: duplex, construction height: 2,855 mm, empty load weight: 6,300 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,040 mm Load capacity: 4,000 kg Load center: 450 mm Fork width: 150 mm Fork thickness: 50 mm Fork length: 950 mm Fork carriage width: 1,350 mm MACHINE DETAILS Mast type: Duplex Drive type: Internal combustion engine Power: 42 kW Speed class: 15 ISO class: ISO class 3 = 2,500–4,999 kg Front tires Tire type: Non-marking Outer diameter: 450 mm Tire width: 200 mm Tire condition: 0–20 % Rear tires Tire type: Non-marking Outer diameter: 680 mm Tire width: 255 mm Tire condition: 0–20 % Battery voltage: 12 V Battery type: Starter Kedsz Hvmnopfx Accsnc Battery year of manufacture: 2018 Unladen weight: 6,300 kg Overall length: 2,190 mm Overall width: 2,050 mm Operating hours: 16,914 h EQUIPMENT 3rd valve Rear work light Front work light Heater Full cab Air conditioning CE certificate Non-marking tires Seat heating 3-wheel design Seat Two-way catalytic converter 55-liter gas tank with indicator Blue Spot Large alternator, 90 A Air-suspended seat Footwell heater Note: The rear wheel motor is leaking.

Condition: good (used), Year of construction: 1993, operating hours: 4,313 h, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 6,100 mm, throat depth: 300 mm, distance table to ram: 500 mm, clearance between the columns: 5,500 mm, oil tank capacity: 350 l, overall weight: 26,000 kg, Max. pressing force: 320 t Bending length: 6100 mm Distance between uprights: 5500 mm Control system: MNC 95 c Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Working speed: 7 mm/s Kjdpfx Ace Aaybvjconc Return speed: 70 mm/s Oil capacity: 350 l Operating hours: 4312 h Voltage: 380 V / 50 Hz Total power consumption: 22 kW Machine weight approx.: 26 t

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 647/07, overall weight: 1,000 kg, total length: 2,500 mm, total width: 2,500 mm, total height: 4,700 mm, input frequency: 50 Hz, input voltage: 400 V, type of input current: three-phase, Good morning, I have a CWT 95/1200 cooling tower for sale. It is a forced-draft cooling tower. The technical specifications are shown in one of the photos. Documents for the forced-draft cooling tower: - Declaration of Conformity Knjdpjz Szfbefx Accsc - Technical and Operational Documentation - Information Sheet Renovation work carried out: - Motors rewound - Bearings replaced - Sealing systems replaced I am happy to provide any additional information by phone or email.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: DMG MORI Type: DMU 95 monoBlock Year of manufacture: 2019 Control system: Siemens 840D sl Operate Technical data: Travel distances: X-axis: 950 mm Y-axis: 850 mm Z-axis: 650 mm Rotational range C-axis: 360° Swivel range A-axis: +/- 120° Main spindle: Tool interface: HSK-63A Speed range - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: C-axis d850 x 750 mm integrated into Fixed table 1,000 mm x 750 mm Max. table load: 1,000 kg Max. workpiece dimensions: d 1,040 mm (clamping)/ d 850 mm (machinable) h 590 mm Tool changer: Number of tool positions: 60 Max. tool diameter: 80 / 160 mm Max. tool length: 420 mm Max. tool weight: 8 kg Chip-to-chip change time: 5.9 s Feed rates: Rapid traverse (x/y/z): 40 m/min Feed rate (x/y/z): 40,000 mm/min Technical features & accessories: - Tool changer system with dual gripper - MPC Machine Protection Control - Production package: - Chip conveyor with coolant unit 600 l / 160 gallons, - Paper band filter - Internal coolant supply, 40 bar / 23 l/min, through the spindle center (AD) - External coolant supply, 4 bar – 40 l/min, (theoretical pump capacity) - Chip flushing in the cabinet door (no standard coolant unit) - Spray gun 3 bar – 40 l/min - Oil and emulsion mist separator, mechanical filter, flow rate 600 m³/h - Infrared measuring probe Renishaw PP60 optical (OMP 60) (if available) - Blum laser, tool measurement in the machining area - 3D quickSET preparation - Electronic handwheel (if available) Kjdpfxoz Ap N Dj Accsnc Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Subject to change and errors in technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2007, travel -x axis 800 mm travel -y axis 500 mm travel -z axis 610 mm control HEIDENHAIN - TNC 530 table load 600 kg number of spindle speeds 14.000 U/min numbers of positions in the tool changer 46 tool taper HSK-A63 Milling Machine - Vertical | FEHLMANN - PICOMAX 95 equipped with 46-way tool changer and chip conveyor. Kjde Aa A Rmepfx Accsnc Equipment / Scope of Delivery: - touch probe: HEXAGON - tool measurement system: Blum - oil mist separator: Donaldson - high-pressure coolant system with coolant pump: Fehlmann - burn Engineering FD 2500-F11 cooling unit - Knoll 300 K-1 scraper belt conveyor The machine is in a well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX95 | PICOMAX-95

Condition: like new (used), Year of construction: 2020, operating hours: 16,785 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, CNC Machining Center Manufacturer: Fehlmann, Model: Picomax 95 Year of manufacture: 2020 Technical Data Make: Fehlmann Model: Picomax 95 Year: 2020 Operating hours: 16,785 total / 7,181 spindle hours Spindle speed: 50 – 18,000 rpm Spindle power: 25.2 kW Max. torque: 120 Nm at 50–2,010 rpm Control: Heidenhain TNC 640 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,600 x 550 mm, 10 slots, 12H8, 50 mm spacing Kjdpfx Aey Ny A Djccsnc XYZ positioning accuracy (ISO 230-2): A = 0.005 mm / R = 0.003 mm Electrical connection: 400 V 3P+N+E / 50 Hz / 63 A (T) Standard Equipment - Feed rate range: 1 – 30,000 mm/min (standard) - Automatic tool changer, operator side, main time parallel loading incl. Fehlmann extended tool management on TNC 640 - Direct linear measurement system with pressurized air in XYZ - Pressurized air cleaning with activated carbon filter - Coolant system with chip drawer and fine-chip filter insert, coolant spray gun, chip flushing, machine shutdown via M function - Cooled motor spindle and Y-axis drive - Spindle and thermal expansion compensation - Graphical machine diagnostics system via softkey - Drawer block, lower right - Interfaces: RJ45, USB, RS232 - 48-position chain magazine HSK-A63, double-gripper tool changer. Magazine accessible operator side, parallel to machining - Electronic handwheel HR 510 for TNC 640 - Active cooling system for motor spindle and Y-axis drive - Work area enclosure with polycarbonate safety windows; powder-coated; large-opening stainless steel sliding door at front/top for crane loading - Left side door with lockable polycarbonate windows - Chip flushing via machine bed - FEHLMANN cycle package Special Equipment - Automatic length compensation of the milling spindle via direct measuring system - Tool clamping system HSK-A63 - Leakage sensor to monitor coolant supply through spindle - Automatic right-side enclosure door for PICOMAX 95 - ProfiNet robot interface to PICOMAX as per Fehlmann interface description for customer-specific robot integration - Coolant system 700 l, BF/HD80, with through-spindle cooling, 80 bar, and chip conveyor - Emulsion and oil mist extractor system for work area; programmable operation via M function: on, off, intermittent - 3D probing system Blum TC52LF incl. spindle adapter HSK-A63 - LaserControl Blum LC50-DIGILOG for tool measurement and monitoring D 0.02 – 120 mm - Reference tool HSK-A63, Ø 8 mm - FEHLMANN 5-axis cycle package Automatic Indexing & Swivel Unit ATS 200 D - with Schunk TANDEM center vise KSP100 Automation – Unirobot pro Unirobot M-20iA-10P pro Robot: Fanuc 6-axis industrial robot - Manipulator: FANUC M-20iA - Max. payload: 20 kg - Teach pendant Safety fence system uniprotect Drawer system incl. workpiece carrier ALB - 10 pneumatic drawers with workpiece carriers (400 x 600 mm) FMB quick-change head Workpiece detection via light barrier Profinet interface Robot cell incl. program creation - Double gripper system Gripper modules: SCHUNK JGP 100-1 Max. workpiece weight: 3.3 kg All information subject to change. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: chip conveyor, documentation/manual, DMG MORI Machining Center Knjdpfozxpt Uox Accsc 5-Axis Simultaneous Type: DMU 95 MonoBlock Year: 2016

Condition: used, functionality: unexamined, overall weight: 36 kg, total length: 700 mm, total width: 460 mm, total height: 340 mm, Ferwood Code: RU0005563 - Manufacturer Code: 2-017-95-1152 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - If interested, we offer a refurbishment service; please contact us. Knedpfx Aoz Duxksccec

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: NBH 95 Year of manufacture: 2001 The machine can be inspected under power by prior appointment. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 630/630/630 mm - Workpiece swivel range within the working area: Ø 750 mm - Spindle clearance above top edge of pallet: min./max. 150/780 mm Pallet - Pallet clamping area: 400 x 500 mm - Transport load per pallet: approx. 0,6 tons - Fixture height: 880 mm - Pallet changeover time: approx. 7 sec. NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Positioning uncertainty A according to ISO 230-2: 0,003 degrees - Permissible torques on the clamped table: * Tangential torque: max. 3.200 Nm * Tilting torque: max. 4.500 Nm Knodsz Emp Rspfx Accjc Working spindle / Gearbox headstock - Tool holder: HSK-A 63 - Diameter at front bearing: 80 mm - Drive power 100% duty cycle/40% duty cycle: 21/30 kW - Speed range: max. 16.000 rpm - Torque at 100% duty cycle / 40% duty cycle: max. 100/143 Nm Feed / Feed force / Rapid traverse - Feed range, X, Y and Z axes: 1 – 50,000 mm/min - Feed force, X, Y and Z axes, 40% duty cycle: approx. 10.000 N - Rapid traverse speed, X, Y and Z axes: 50 m/min - Rapid traverse of rotary table: 40 rpm - Acceleration: approx. 7 m/s² - Ball screw (pitch): Ø 40 (20) mm Tool magazine: - Tool positions: 144 - 2 additional tool cassettes, each with 47 positions - Number of tool loading and unloading stations: 1 - Tool diameter / max. tool diameter: 75 / 175 (200) mm - Tool length: max. 400 (450) mm - Tool weight: max. 12 kg - Magazine cassette load capacity (including cassette): max. 600 kg Electrical system - Total power requirement: 80 kW Machine installation - Space requirements, area: approx. 16,75 m², height: 3,2 m - Ready-to-use machine weight: approx. 13,5 tons ACCESSORIES / EQUIPMENT: - Control: Siemens SINUMERIK 840D - Chip conveyor - Additional equipment for automated production: MPS pallet storage system - Documentation - CE marking - ... Technical data sheet with full details, including information on the further features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: like new (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 300 kW (407.89 HP), The temperature control unit from Technotrans is available for sale. It has been checked in the workshop for its functionality. A short description of the unit can be provided upon request. Medium: Water Kodoxy Nx Tspfx Accjnc Heating capacity: 18 kW Operating temperature: max 95°C Direct cooling capacity: 364 kW Pump capacity: 165 l/min Max. pump pressure: 5.1 bar VA tank Interface: TTY 0-20mA with cable

Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately Model: 95 L IM Intensive mixing of various rubbers Rotor type: HP-5 Type Design Tank capacity: 95 liters Dosing opening size: 860mm x 407.7mm Dosage (Kg.): 95 x Sp. Gr. compound x filling factor The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90. A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor Rotor speed: 6 to 60 rpm Active cycle time: Continuous Discharge door: Ksdpfoy E I Awjx Acconc Hydraulically operated sluice door in the side of the chamber: Peripherally drilled Floating weight: Hydraulic operation The mixer: approx. 10t The main motor: approx. 5t The main gearbox: approx. 5t The main control panel: approx. 1.5t

Condition: used, axle configuration: 3 axles, first registration: 04/2026, total width: 2,550 mm, total height: 2,380 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 7,120 mm, color: black, Equipment: crane, = Additional Options and Accessories = - Lift axle - Tool box - Central lubrication system = Notes = Broshuis 3 ABSD -48/2 WS Wide spread. 3 axles steered. Radio-controlled. 1st axle designed as a lift axle. 2 x extendable: 638 cm + 618 cm. Twist locks: 20 ft / 30 ft / 40 ft / 45 ft. Loading platform height (loaded): 100 cm. Ronges. Recessed tie-down eyes. Tie-down eyes in side rail. Width markers with lighting. Work lights. Flashing lights. Stainless steel boxes. Wheel wideners. Spare wheel on the headboard. Box on the headboard. Hiab iQ 958 Hipro E-9 Jib: 155Q-6 JDC Winch: Rotzler Titan TI 2. 6 x hydraulically extendable outriggers. Electrically powered by battery pack / E PTO. Motor power (nominal and peak): 110 kW - 200 kW. System voltage: 800 Vdc. Torque (nominal and peak): 275 Nm - 640 Nm. Battery pack: LiFe(PO4) LFP 200 kWh. AC system charger: 1 x 22 kW. DC charging 200 kWh (@1 x 150 kW) CCS2 80 min 100%. Required current for AC charging: 400 VAC 3 phase 32A. = Further Information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Steered; Tire tread left inner: 95%; Tire tread left outer: 95%; Tire tread right inner: 95%; Tire tread right outer: 95% Rear axle 2: Twin tires; Steered; Tire tread left inner: 95%; Tire tread left outer: 95%; Tire tread right inner: 95%; Tire tread right outer: 95% Rear axle 3: Twin tires; Steered; Tire tread left inner: 95%; Tire tread left outer: 95%; Tire tread right inner: 95%; Tire tread right outer: 95% Weights Unladen weight: 31,560 kg Payload: 27,440 kg GVW: 59,000 kg Functional Crane: Hiab Maintenance APK (Technical Inspection): Valid until 04/2027 Financial Information Price: Upon request Identification Model number: 3ABSD / EXTENADABLE / HIAB 95 tm Knjdjzt Srpjpfx Accoc = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 95 Monoblock was manufactured in 2016. It features a tool capacity of 60 tools and is equipped with a Heidenhain TNC640 control unit. The machine includes an internal coolant supply of 40 bar and a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 95 Monoblock vertical machining centre we have for sale. Contact us for further details. - Internal Coolant Supply (IKZ): 40 bar- Tool Measurement: Blum laser tool measurement- Optional Equipment: FCS clamping system (optionally included / available for additional purchase)- Operational Status: Fully functional, currently still in full operation- Machine Condition: Good; air/sight glass on the front is defective; runs very smoothly and with high accuracyThe displayed image of the machine is AI generated. Ksdpfx Acoz S E Eljcjnc Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg Kedoy Sazfepfx Accjnc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Stack cutter IDEAL 4850-95 EP WITH AUTOMATIC PRESSING AND BACK GAUGE PROGRAM CONTROL 475 mm cutting length | electro-mechanical knife drive | automatic pressing | electrically operated back gauge with “EP” control module | electronic handwheel with continuously adjustable speed for manual back gauge fine adjustment | optical cutting indicator | pressure bar guided on both sides, controllable independently of the knife | precision back gauge spindle | adjustable back gauge rack with fine pitch and plastic sliders | two side guides each on the front and back table | all-steel knife carrier and adjustable knife guides | complete with base frame and paper stacking table | Electronically controlled, pivoting safety device on the front table; transparent safety cover on the back table; main switch and safety lock with key; two-hand cutting release with repeat lock and simultaneous operation control; 24-volt control; patented IDEAL safety drive; automatic knife and pressure bar return from any position; disc brake for immediate knife stop; knife changing device with covered knife edge; knife depth adjustment from the outside; easy knife change from the front, without removing housing parts. Power connection: 230 V / 50 Hz / Knsdezqzxgepfx Accec Dimensions (H x W x D): 1230 x 755 x 970 mm, Weight: 215 kg, Color: pearl grey. Cutting length 475 mm Cutting height 80 mm Remaining cut 35 mm Feed depth 450 mm Power connection 230 V / 50 Hz Our offers refer to used machines, which may show signs of use (minor scratches or discoloration).

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). The visual condition is very good, with only minor signs of normal use. Technical specifications: • Manufacturer: DELO • Model: DELO-UNIPRO • Part number: 95 200 01 • Serial number: 1501 UNI 648 • Power supply: 100–240 V AC • Frequency: 50–60 Hz Knsdpfx Ajz Snrhjccoc • Power consumption: 40 W • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Condition: used, functionality: unexamined, Ferwood Code: RU0005563 - Manufacturer Code: 2-017-95-1152 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - If interested, we offer a refurbishment service; please contact us. Knedpszmibzsfx Accec

Condition: good (used), functionality: fully functional, Power output: 6370 watts Maximum operating temperature: 95°C Medium: Water Two units available! Price per unit: 350 EUR - PRICE REDUCTION! Kedpfx Ajv R Edwoccsnc

Condition: excellent (used), functionality: fully functional, mileage: 65,078 km, power: 70 kW (95.17 HP), first registration: 12/2022, fuel type: diesel, tire size: 195/65R15 95H M+S, tire condition: 95 %, axle configuration: 4x2, wheelbase: 2,716 mm, next inspection (TÜV): 10/2028, fuel: diesel, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space length: 1,760 mm, loading space width: 1,260 mm, loading space height: 1,120 mm, Equipment: ABS, EBS, air conditioning, airbag, cruise control, electronic stability program (ESP), full service history, navigation system, power assisted steering, traction control, truck registration, Very clean and well-maintained lease return vehicle with high-quality special equipment, first owner, Renault Kangoo Rapid Blue dCi 95 Extra with Sortimo workshop/service equipment, Euro 6 with truck registration, 180° rear wing doors, divided partition, on the right side designed as a folding protective grid door, PDC, like-new M+S winter tires, etc. Truck registration Euro 6 Storage compartment above the driver 4.2-inch instrument panel with color display ABS with EBD Exterior mirrors, electrically adjustable and heated Ceiling lights (2) Diesel particulate filter Tachometer ESP with hill start assist Knedpo Abbk Usfx Accsc Easy-Life storage drawer Electric front windows Transmission: 6-speed manual transmission Asymmetrical rear doors, sheet metal ISOFIX child seat attachment system Adjustable front headrests LED daytime running lights Steering wheel adjustable in height and depth Light and rain sensor Center console with storage compartment Upholstery: "KILYA" fabric upholstery Exterior color: Highland Gray Metallic Tire repair kit Wheels: 15-inch steel rims "Carten" Tires: 195/65R15 95 H M+S, tread depth axle 1: 90%, axle 2: 100% Key: 3-button key with automatic door locking Power steering Seats: Passenger seat variable and adjustable in several ways, foldable for through-loading from the cargo area Partition divided, with grid door on the right, foldable for through-loading Seats: Driver's seat adjustable in height Telephone: e-Call emergency call system Cruise control and speed limiter Doors: Sliding door on the right Immobilizer, electronic Central locking with remote control Parking assistance system at the rear and reversing camera Wooden floor and recessed tie-down points for securing cargo Wooden paneling up to roof height Interior mirror, automatically dimming Climate control: 2-zone automatic climate control LED lighting in the cargo area Package: Sound & Climate Package 2 with navigation Package: Cargo area protection package Package: Vario package EASY LINK 8-inch, smartphone integration, navigation Reversing camera Cargo area conversion, Sortimo workshop/service equipment, shelving on the left Cargo area dimensions: Length 1,760 mm, width 1,260 mm, height 1,120 mm Complete service history. Major inspection with renewal of all filters, engine oil, and brake fluid change, as well as new technical inspection (TÜV)/emission test! If you have any questions, please do not hesitate to contact us by phone. The vehicle description is for informational purposes only and does not constitute any guarantee in the legal sense. No guarantee for accessories, subject to changes, prior sale and errors! We are a member of the Federal Association of Independent Car Dealers (BVfK) and have the BVfK quality seal!

Year of construction: 2018, condition: used, We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts Kedevfdvbspfx Acconc *

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 830397, functionality: fully functional, power: 85 kW (115.57 HP), temperature: 1,000 °C, inner dimension length: 1,600 mm, inner dimension width: 700 mm, inner dimension height: 950 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in a large German corporation, adhering to applicable guidelines and maintenance recommendations. ACQUISITION COSTS Original purchase price in 2008: €490,000 plus VAT Retrofit in 2022: €254,000 plus VAT TECHNICAL DETAILS Dimensions of the heat treatment unit Housing width, including control cabinet: 3,600 mm Overall length with attachments: 7,000 mm Height above furnace floor: 4,900 mm Loading height above furnace floor: 1,200 mm Pit depth: 630 mm Internal height of the furnace chamber: 950 mm Internal depth of the furnace chamber: 1,600 mm Internal width of the furnace chamber: 700 mm Temperatures Rated furnace temperature: 1,000 °C Kedpjy Uxt Ejfx Acconc Operating furnace temperature: 850 °C Oil bath temperature: 60 °C Dimensions of the furnace control cabinet Width: 2,000 mm Depth: 600 mm Height with 100 mm base: 2,100 mm Weights and Volumes Weight of multi-purpose chamber furnace: 22,000 kg Oil bath volume: 7.5 m³ Weight of switchgear: 600 kg Total weight of furnace with oil and charge: 30,000 kg Energy Data Total connected load: 85 kVA Supply voltage: 400 V Supply frequency: 50 Hz Number of phases: 3 Oil bath heating: 2 x 21.6 kW Motor power, heating chamber circulation fan: 5.5 kW Motor power, pre-chamber circulation fan: 2.2 kW Motor power, oil bath air cooler: 3.0 kW Motor power, lifting table: 11 kW Motor power, loading machine: max. 38 kW Current draw, pre-chamber door: max. 17.2 A Current draw, heating chamber door: max. 13.2 A Motor power, combustion air fan: 1.5 kW Motor power, oil bath pump for oil bath: 2.2 kW Motor power, cooling air blower: 0.75 kW Motor power, oil bath circulation fan: 2 x max. 11 kW Motor power, oil bath pump for cooling plates: 1.1 kW Motor power, batch oil circulation pump: 3 kW Batch dimensions with base grate Height: 950 mm Width: 700 mm Length: 1,600 mm Weight: 1,000 kg Note: The dismantling and loading of the furnace must be organized by the buyer.

Condition: used, functionality: unexamined, Ferwood Code: AGG0215 - Manufacturer Code: 2-017-95-5550 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer a reconditioning service; please contact us. Kedpfxszmht Ao Accjnc

Condition: used, Year of construction: 2018, functionality: fully functional, Planer jointer Felder A 951L Year of manufacture: 2018 Location: Freising Kjdpfx Acs Aaz I Recenc Inspection is welcome. We have other used machines available. Please contact us.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, Lvd PPEB 110/20 MNC 95 Sheet metal bending machine Good condition Includes machine manual Machine weight: ca.9480 kg Width: 3600 mm Length: 2700 mm Kodpfov Er T Uox Accenc Height: 3000 mm