Used H&W Walking Floor Semitrailer for sale (69,352)

Condition: used, maximum load weight: 28,228 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, next inspection (TÜV): 07/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Kraker sliding floor semi-trailer, 92 m³, in good condition * First registration: 05/2022 * Lift axle * Disc brakes * EBS/ABS * Aluminum body * Sliding floor * Tool box * Underrun protection * Good tires * Well-maintained interior * Good overall condition * Ready for immediate use Nodpfx Abozviqbo Ajdc If you have any questions, please do not hesitate to contact us.

Condition: used, B 60 W BP DOSE (ROLLER) Ride-on Scrubber-Suction Machine The B 60 W Bp Dose ride-on scrubber-suction machine is equipped with a drive system, a maintenance-free 120 Ah battery (2 units), and a user-friendly key system. This system enables simple and safe operation by regulating access and operating rights to protect against incorrect use. The machine is ideally suited for cleaning textured floors and can cover areas of up to 2,500 square meters. The brushes can be quickly and easily installed and replaced. Thanks to the eco!efficiency mode, the battery life is significantly extended, and the integrated tank flushing system makes it easier to clean the dirty water tank after floor cleaning. - Ride-on scrubber-suction machine (60 l) with drive system. - Ideal for 1000 - 2500 m². - Energy-saving eco!efficiency mode. Proven dual-disc technology ■ Brush heads can be quickly installed and replaced. Powerful drive system ■ Comfortable driving with stepless speed adjustment (forward and reverse). ■ Pre-settable maximum speed. ■ Operation via drive levers directly on the handle. With Dose detergent dosing system. ■ With on-board detergent dosing. ■ Precise and even dosing (adjustable up to 3%). ■ No contamination of the tank, as it is only filled with fresh water. Technical data Power supply V / Hz 100 – 240 / 50 – 60 Working width, suction mm 850 Ndjdsx Hvvzjpfx Ab Ajc Tank, fresh/dirty water l 60 / 60 Brush speed rpm 600 – 1300 Brush pressure kg 37 Battery Ah 120 Battery type maintenance-free Battery charging time h 4.7 Sound pressure level dB(A) 71 Water consumption l/min 3.6 Drive type battery Drive drive motor Mains connection, charger V / Hz 100 – 240 / 50 – 60 Dimensions (L × W × H) mm 1520 × 748 × 1160 Item condition: used, the pictures may differ, as the item is available in multiple units. Quantity: 1x Kärcher ride-on scrubber-suction machine B 60 W Bp Dose General signs of wear include all damage that can be expected due to age and operating hours. You can find more cleaning machines - new and used - in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! Ndsdpfx Abeym En Se Ajc 4 units available! Brand: SCHWARZMÜLLER Model: J-Series S1 First registration: 03.2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible total weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles - STEEL FLOOR - ALUMINIUM chassis - Volume: approx. 92 m³ - Reinforced walls, continuous aluminium wear plates along the interior sides - Aluminium body - Portal doors - ABS/EBS - SAF axles - Lift axle - Disc brakes - Air suspension - Sliding roof tarpaulin - Standing platform at front wall - Hydraulic lifting and lowering system - Radio remote control - Toolbox - Underrun protection - Spare wheel holder - Tyres: 385/65 R22.5; tread approx. 70% / 80% / 90% - etc. Would you like to visit us? We offer a free pick-up service from Linz train station (4020 Linz). We handle all customs formalities for you. Want to trade in your current vehicle? If we reach an agreement, we are happy to accept your trade-in. This offer is non-binding and subject to prior sale. Errors and interim sale excepted.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2003, * Lift axle * BPW axles * Conveyor belt * Walking floor * Tarpaulin cover * Dosing roller * Unladen weight: 9,860 kg -----Internal vehicle number: 9815----Subject to errors & prior sale. WhatsApp support available! Ndjdpfx Aevyxzbeb Aec If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: used, maximum load weight: 34,392 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 08/2025, next inspection (TÜV): 08/2027, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,737 mm, loading space volume: 92 m³, total length: 14,010 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, KRAKER 3-axle Walking Floor Semi-Trailer, 92 cubic meters First registration: 08/2025 Mileage: 91,240 km Unladen weight: 7,610 kg Permissible total weight: 42,000 kg Dimensions (L x W x H): 13,535 x 2,480 x front 2,692 and rear 2,782 mm BPW axles with large disc brakes, 430 mm WABCO Trailer-EBS Premium WABCO Smartboard WABCO OptiLevel 1st axle: lift axle Tires: 385/65 R 22.5 Tread depth, axle 1: 12 mm Tread depth, axle 2: 14 to 15 mm Tread depth, axle 3: 12 mm Crank-operated landing gear, full load capacity 4 LED work lights REMOTE control CARGOFLOOR floor, 21-slat system, 8 mm smooth Full-width sliding planks Cleaning door in the front wall, driver's side Wear plates at the rear on the side walls Reinforced tarpaulin roof, 900 g/m2 Nsdpfez Iu Utsx Ab Aodc Folding rear gate RENTING is the new BUYING; with us, full-service rental is immediately available.

Condition: used, maximum load weight: 32,750 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,739 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle TMT Walking Floor Semi-trailer, 92 cbm First registration 05/2025 Mileage only 75,854 km Internal dimensions (L x W x H) 13,600 x 2,470 x 2,650 / 2,825 mm Axle track 1,310 mm Unladen weight 7,870 kg Saddle height 1,150 to 1,180 mm Chassis made of S700 MC steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO trailer EBS with anti-roll protection RSS 1st axle: Lift axle 3rd axle: Steerable axle Air tank: Aluminum Tire size: 6x 385/65 R 22.5 Jost full-load swivel saddle Lighting: ASPÖCK full-LED 2 x LED work lights Toolbox 800x500x500 mm CARGOFLOOR sliding floor with 21 planks, material thickness 8.0 mm, corrugated Full lining with sliding bearings Control system with wireless remote control Rear end plate made of stainless steel 2 crossbars, reinforced version. Only 2 crossbars allow for better and easier loading! Reinforced tarpaulin roof Rear crossbar can be tilted LaSi code according to EN 12642 XL Ndedpfx Absz Tdp Ss Asc "Rollfix" protective cover for the left side wall, extending over the entire length with a retractable mechanism RENTING is the new BUYING; with us, it is also immediately available in a full-service rental agreement.

Condition: used, axle configuration: 3 axles, first registration: 04/2018, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction, max. 39,000 kg) Axles and Suspension: "Disc brake 22.5" Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function. Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display). First axle with starting assist (new EC regulation, without control unit). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on Alcoa DuraBright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin, screwed into a 10 mm thick plate. Landing Gear: Ndodpfs Adxgxox Ab Asc Mechanical landing gear with two speeds, 2x 20 tons support load with swivel base. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles, operated from the rear. Aluminum air tank system. Electrical System: According to EC standards 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket. Side marker lights in LED design. 2 reflective panels on the rear. Front position lights 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. 2 separate LED reversing lights on the sides, approximately at the level of the supports. Superstructure/Body: "Superstructure fully welded inside", reinforced side walls. Front wall load: 17,250 dkn, side and rear wall: 13,400/10,400 dkn. Aluminum body, side walls: 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower belt. Plank profiles fully welded inside. Floor laid out as a sliding floor system on 140 mm aluminum cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approximately 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, straight design. Special aluminum corner profiles in a sloping design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 twist-lock fasteners, mounted in the welded aluminum rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving residual unloading wall with Kevlar sheet, approximately 1,800 mm long, plus side sealing with Kevlar sheet. Aluminum wear plates on the sides and rear, approximately 2,000x1,500x4 mm. Service door in the front wall. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approximately 880 PE-HD sliders, plus anti-lifting slide bearings. Type CF, 10 mm floor, ribbed design. Hydraulics with approximately 200 mm working stroke. Locking units, type "Faster". Line size NW 21. Locking units with size and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, watertight box. Sliding floor rotated/wear

Condition: used, maximum load weight: 27,406 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2020, next inspection (TÜV): 08/2026, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, KNAPEN K200 Moving Floor Xtreme Heavy Duty Impact (XHDI), Excellent Condition Weights: * Permissible gross weight: 36,000 kg * Axle load: 24,000 kg * Fifth wheel load: 12,000 kg * Unladen weight: 8,594 kg * Payload: 27,406 kg Dimensions & Volume: * External length: approx. 13,670 mm * Width: approx. 2,550 mm * Height: approx. 4,000 mm * Internal height: approx. 2,690 – 2,785 mm * Volume: approx. 91.9 m³ Axles & Chassis: * 3 SAF axles (disc brakes) * Air suspension Njdpfx As Afa Erjb Ajdc * Axle lift (automatic via EBS) * Aluminium rims * Tires: 385/65 R22.5 Body: * Moving floor (Cargofloor CF-500 system) * Heavy-duty aluminium floor (XHDI) * Sliding partition wall * Enclosed side walls * Rear doors Equipment: * Radio remote control for moving floor * LED lighting * Work lights (multiple positions) * Toolbox * Wheel chocks * Broom & shovel holder If you have any questions, we are happy to assist you at any time.

Condition: used, functionality: fully functional, machine/vehicle number: ...630, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! ===== Nodpfx Abey Ihu Sj Aodc 4 units available! ===== Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 01/2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross vehicle weight: 34,000 kg Technical max. total weight: 39,000 kg - Robust, wear-resistant L-shaped steel floor profiles -- STEEL FLOOR -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous aluminium wear plates on the interior sides -- Aluminium body -- Portal doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Load protection slat -- Standing platform at the front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 (tread approx. 70% / 80% / 90%) -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Want to trade in your used vehicle? ...If we reach an agreement, we are happy to accept it in part exchange. This offer is non-binding and subject to prior sale. Errors and interim sale reserved.

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor Trailer K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model / Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Permissible total weight: 36,000 kg 202003-0071956-r_order-configur? * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered walking floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions * External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st–2nd axle: 1,310 mm * Axle spacing 2nd–3rd axle: 1,310 mm ----Axles & Running Gear * 3 x SAF 9 t Intradisc+ Integral CD Off-Road axles * All axles rigid * Disc brakes Ø 430 mm * 10-hole wheel connection * Air suspension with standard control console on left in front of axles * 1 axle as lift axle, fully automatic via EBS * Includes starting aid (3x brakes) * Remote control for lift axle ----Tyres & Rims * Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels complete * No spare wheel ----Body * Closed side walls left and right * Moving partition wall (min. ground clearance 100 mm) * Rear doors with external locking bars * One locking bar per door * Top rail made of steel, swivels out left and right * Platform at front wall * Ladder at front wall left and right * Standard roof bows Ø 60.3 mm (4 units) * Bow spacing: 3 x approx. 4,100 mm * Tarp 680 g/m² (RAL 9006 White Aluminium) Nsdpfe Afa Dzsx Ab Aodc * Tarp supports, 3 positions (4 units) * Tension belts (4 units) ----Floor / Walking Floor * Cargofloor System CF-500 SL-C * Electric controls * Non-slip aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate under floor at rear ----Attachments * JOST landing legs with sliding compensation * Plastic toolbox, left in front of axles (1000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Closed side underrun protection * Swinging mudflaps * Anti-spray mat on 3rd axle * Long access ladder with pull-out rear step and platform * 2 x wheel chocks left * Broom and shovel holder, right ----Lighting * 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulations * LED work lights at rear (radio-operated) * LED work lights at landing legs (radio-operated) * LED LCG-2 switch device ----Hydraulics / Connections * ISO-N and ISO-S couplers + 15-pin connector * Knapen Trailers V1 remote control * Hydraulic connections central at front wall (vertical) * Pressure line left, return line right * Additional hydraulic connections at landing legs * Brake lines available * Acoustic reversing warning signal (manual adjustment) ----Paintwork * Superstructure painted in RAL 7011 Iron Grey * Wheel hubs in RAL 2008 Light Red Orange * Chassis and underside unpainted For further information, I am happy to assist you.

Condition: used, axle configuration: 3 axles, first registration: 09/2018, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for exceptionally high stability and strength, reinforced crossmembers 140 mm high (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer construction max. 39,000 kg). Ndjdpfe Ad Ti Uex Ab Aoc Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard info center, electronic brake wear indicator readable in the central control unit (display). First axle with starting aid (new EC regulation, without central control unit option). Optiturn function on the third axle. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on Alcoa Durabright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 ton support load with swivel foot. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll Stability Support) and Premium modulator. Spring brake system acting on two axles with operation at the rear. Aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 round three-chamber lights, type Aspöck LED, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket. With side marker lights in LED design. 2 reflective panels on the rear. Position lights at the front: 2x white, rear: 2x red, 1 rear light integrated in the underbody protection. 2 LED work lights on the support height and behind the 3rd axle. 4 LED lights in the rear support. 1 fog light, round, in the underbody protection. Superstructure/Dump Body: "Superstructure fully welded inside", reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum dump body, side walls with 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belts. Plank profiles fully welded inside. Floor laid as a sliding floor system on 140 mm aluminum crossmembers. Floor stacker load approx. 10 tons/m2. Crossmembers mounted closely together (approx. 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locks, attached in the welded aluminum rear frame in Teflon and stainless steel bearings. Doors secured in the open position with one chain on each side. Hard wear plates on the side walls, approx. 6,000x2,000x4 mm, fully welded. Moving residue discharge wall with Kevlar sheeting, approx. 1,800 mm long plus side Kevlar sheeting seal. Service door in the front wall with a ladder, opens inwards. Hydraulic System: "Cargo - Floor" sliding floor system, overlapped. Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 1386 PE-HD sliders plus anti-lifting slide bearings, type CF Overlapped 11 mm design. Hydraulics with approx. 200 mm working stroke. Fixed supports on the front wall. Separate possibility for connecting the hydraulic line under the vehicle with fixed supports. Line size NW 21. Fixed supports with size and

Condition: used, axle configuration: 3 axles, first registration: 09/2025, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Crossmembers, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction max. GVWR up to 39,000 kg) Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) readable in the central control unit (display), 1st and 3rd axle lift including Optiturn and Optiturn. 1st axle with starting aid (without central control unit), tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims, silver, 11.75x22.5 ET 120. King Pin: 2" bolted into a 10 mm thick plate. Braking System: According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles with operation at the rear. Aluminum compressed air system. Nedpfxsz S St Ao Ab Asdc Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lamps, type Aspöck Eco LED 3, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. Audio alarm when reversing. Superstructure/Body: Body fully welded inside. Reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt. Plank profiles fully welded inside. Floor laid as a sliding floor system on 140 mm aluminum crossmembers, floor load capacity approx. 9 tons/m2. Crossmembers mounted close together (approx. 350 mm). Aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in the welded aluminum rear frame on Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Hard wear plates on the side walls, approx. 2,000x1,500x4mm, fully welded. Sliding residual discharge wall with Kevlar sheet, approx. 1,800 mm long, plus side Kevlar sheet seal. Service door on the left in the front wall, opening inwards. Hydraulic System: "Cargo - Floor" sliding floor system. Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed brackets on the front wall. Separate possibility for connecting the hydraulic line under the vehicle with fixed brackets. Line size NW 21. Fixed brackets with dimensions and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical control integrated in a lockable, watertight box on the l

Condition: used, maximum load weight: 27,470 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2018, next inspection (TÜV): 10/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen K200 Sliding Floor Trailer, 92 m³ * BPW axles with air suspension and disc brakes * 385/65 R22.5 tires * Aluminum rims Nodpo Aauatjfx Ab Aodc * Stainless steel storage box * Tarp cover * Moving partition * Aluminum support legs * Work lights * Work platform with access ladder We are happy to provide further information upon request.

Condition: used, maximum load weight: 33,910 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2025, next inspection (TÜV): 11/2026, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle STAS Walking Floor Semi-trailer, 90 cbm First registered 11/2025 Internal dimensions (L x W x H): 13,500 x 2,475 x 2,641 / 2,752 mm Axle distance: 1,310 mm Unladen weight: 8,090 kg Saddle height: 1,150 to 1,200 mm Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced “CD” version WABCO trailer EBS with anti-roll system (RSS) WABCO Smartboard with axle load display 1st and 3rd axles are lift axles Air tank, aluminum Nedeyih R Sopfx Ab Aedc Tire size: 6x 385/65 R 22.5 JOST full-load swivel saddle Lighting: ASPÖCK full-LED 4 x LED work lights Toolbox at the rear, on the left side Side walls with profile joints, completely welded on the inside CARGOFLOOR sliding floor with 21 slats, material thickness 10 mm, ribbed Control system with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel 3 load securing bars, reinforced version for waste transport Reinforced roof tarpaulin, Panama 900 g Cleaning door in the front wall Rear crossbar can be tilted and unlocked from below! Ideal for bale transport RENTING is the new BUYING, and with us, it is immediately available even in FULL-SERVICE RENTAL.

Condition: used, functionality: fully functional, machine/vehicle number: ...634, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! ===== 4 units available! ===== Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 01/2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross vehicle weight: 34,000 kg Technical max. total weight: 39,000 kg Njdpfx Ajy Ih A Nsb Asdc - Robust, wear-resistant L-shaped steel floor profiles -- STEEL FLOOR -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous aluminium wear plates on the interior sides -- Aluminium body -- Portal doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Load protection slat -- Standing platform at the front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 (tread approx. 70% / 80% / 90%) -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Want to trade in your used vehicle? ...If we reach an agreement, we are happy to accept it in part exchange. This offer is non-binding and subject to prior sale. Errors and interim sale reserved.

Condition: used, maximum load weight: 27,290 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,800 mm, loading space width: 2,470 mm, loading space height: 2,853 mm, loading space volume: 92 m³, Equipment: ABS, SDS390 92³ X-TRA Long Sliding Floor Lift Axle SAF* German Trailer / German Semitrailer * 92 m³ * SAF axles * Lift axle * Disc brakes * Floor: Sliding floor with wear-resistant plate at the rear made of V2A steel, floorboards made of aluminum, 8 mm floor profile, ribbed design, end caps in aluminum* Tires: 385/55 R 22.5, 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Overall length: 13800 mm * Overall width: 2550 mm * Internal length: 13460 mm * Internal width: 2470 mm * Internal height at the front approx. 2655 mm * Internal height at the rear approx. 2853 mm * Tare weight: 7,710 kg Ndsdperwvl Tsfx Ab Aec * Permissible total weight: 35,000 kg * Payload: 27,290 kg * Air suspension * All information is subject to change without notice. * Further information and criteria available upon request. * Additional services: * Repainting, retrofitting possible * Short-term registration / customs registration / license plate * Transfer and shipment possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing solution for every customer. We can often also support customers with poor credit ratings and connect them with good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * Repainting in your desired color is possible in our workshop at a reasonable price and in good quality. * Are you located further away and do not have the possibility or time to inspect and check a truck with us? No problem, you are welcome to order an independent expert of your choice to have the truck inspected technically and visually. If, contrary to expectations, a defect should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used vehicle throughout Europe for an additional charge.

Condition: used, empty load weight: 8,050 kg, maximum load weight: 30,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schwarzmüller moving floor S1 J series | Hydraulic connections front wall | SAF axles with disc brakes | Tool box, spare wheel holder | 8050 kg tare weight | Aluminum rims | Radio remote control | Tires: 385/65 R22.5 | 92m³ | Subject to errors and prior sale. Ndodpsvialtsfx Ab Asc

Condition: used, empty load weight: 7,520 kg, maximum load weight: 28,480 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 08/2021, loading space length: 13,460 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 88 m³, total length: 13,460 mm, suspension: air, tire size: 385/65 22,5, tire condition: 40 %, color: grey, Year of construction: 2021, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41857 Schwarzmueller, sliding floor semi-trailer * Year of manufacture: 2021 * ABS, Anti-lock Braking System * EBS, electronic brake system * Air suspension * Lift axle * Load securing certificate DIN EN 12642 Code XL * Retractable lashing eyes * Portal door * Air coupling head (red + yellow) * 2x7-pin connector * 15-pin connector * Lifting and lowering device * Storage box/toolbox * Platform Ndodpfs Aa Id Sex Ab Aoc * Rolling tarpaulin * Suspension: Air * Total weight: 36,000 kg * Tare weight: 7,520 kg * Payload: 28,480 kg * Permissible total weight: 36,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 30% - 30% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% - 30% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 50% - 50% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13,460 mm, W=2,480 mm, H=2,650 mm * Internal volume*: 88 m² * Pallet spaces: 33 * Cargo floor: 8mm * Forklift drivable * Saddle height: 1160mm * Upon request, we will gladly send you further pictures and a construction description. Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and easy financing * Application for all (export) documents * Ordering of export license plates/customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists, who will be happy to advise you. Reference no. for inquiries: 41857

Condition: excellent (used), Year of construction: 2020, Vutek 5R+ Ultradrop LED UV Roll Printer Color: 4C+ White EXTREME speed and quality Up to 460 m2 per hour True resolution up to 1200 dpi UltraDrop™ Technology with native 7 pL printheads and true multi-drop Ndodpfx As Adq Nxsb Asc addressability for high-definition image quality, outstanding smoothness in shadows, gradients, and transitions, and superb text quality with small text in both standard and high-quality modes, with fewer satellites and greater clarity in all print modes Installed in 2020 (manufactured at the end of 2018) Prints with 5m rolls, triple roll capability, 1.6m width Horizontal cut: automatic Vertical cut: blade system Double-sided printing Mesa/Textile Kit Under EFI service contract: Last EFI annual full service completed in October 2025 Available at the end of 2026

Condition: used, axle configuration: 3 axles, first registration: 05/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Aluminum chassis with reinforced continuous frame. Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Crossmembers, 140 mm high, reinforced design (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of aluminum up to the support structure (trailer design, max. 39,000 kg). Ndedpfx As Ad Ti Ijb Asc Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9-ton version with DCA air suspension, raising and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable on the control unit (display), 1st and 3rd axles liftable with starting assist (new EC regulation, without control unit option), 3rd axle with Optiturn control. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on Alcoa DuraBright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin, screwed into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20-ton support load with swivel foot. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll-Stability-Support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to EC standards 91/633 and 97/28, with 6 LED three-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, front position lights 2x white, rear 2x red, 2 separate LED reversing lights behind the 3rd axle, 2 separate LED reversing lights on the sides, approximately at landing gear height, 1 LED interior light. Superstructure/Body: "Superstructure fully welded inside," reinforced side walls. Front wall load: 17,250 dkn, side and rear wall: 13,400/10,400 dkn. Aluminum body, side walls: 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded in with upper and lower belt. Plank profiles fully welded inside, floor designed as a sliding floor system on 140 mm aluminum crossmembers, floor load capacity approx. 9 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a sloping design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locking mechanisms, mounted in a welded aluminum rear frame in Teflon and stainless steel bearings, doors secured in the open position with one chain each on the sides, moving residual unloading wall with Kevlar lining, approx. 1,800 mm long, plus Kevlar seal on the sides, aluminum wear plates on the sides and rear, approx. 2,000x1,500x4 mm, service door in the front wall. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically operated aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders, in addition to anti-lifting slide bearings, type CF, 10 mm floor, ribbed design. Hydraulics with approx. 200 mm working stroke, line size NW 21, fixed halves with a size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left, with remote control integrated into a lockable, waterproof bo

Condition: used, maximum load weight: 28,230 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2017, loading space length: 13,440 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 89 m³, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, 3-Axle Knapen KT 01 Moving Floor Trailer 89m³ VIN: 7028454 Chassis / Attachments: * Air suspension / lifting + lowering function * Lift axle: 1st axle * Haacon landing legs * WABCO Smart Board * Pressure gauge Ndsdpeyk N N Isfx Ab Aec * 3 x BPW axles with disc brakes * Tyres: 385/65 R.22.5 * Remaining tyre tread: 1=60/70% 2=30/60% 3=50% * PVC tool box by Knapen Body: * Moving floor system: Cargo Floor * L x W x H: 13.44 m x 2.48 m x 2.68 m * Capacity: approx. 89 m³ * Sliding tarpaulin (roll tarp) * Standing platform with walkway and ladder on the left side Weights: * Gross weight: 36,000 kg * Payload: 28,230 kg * Unladen weight: 7,770 kg Miscellaneous: * German registration New technical inspections / safety checks or load capacity increases/reductions are available upon request. We are happy to assist with the procurement of export/transit license plates, and can also organize the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to prior sale, changes, and errors! ---- About us Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the refurbishment and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On our 11,000 m² premises, you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. Customer satisfaction is very important to us, which is why we offer our customers an excellent all-round service package and provide them with a competent point of contact to assist them in buying or selling vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organizing special transports We are happy to assist in organizing special transports. Temporary/export license plates We are happy to assist in obtaining export or short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2014, loading space volume: 92 m³, Equipment: ABS, Carnehl walking floor CSS/AL * EZ 02.10.2014 * 1st axle lift axle * 1 vehicle owner / 1 car owner * German walking floor semitrailer / German walking floor semitrailer * Loading volume: 92 kbm * Tires: * 1st axle 385/65 R 22.5 v.l. 12 mm & v.r. 12 mm * 2nd axle 385/65 R 22.5 v.m.l. 12 mm & v.m.r. 12 mm Njdpfxsqnqgpo Ab Asdc * 3rd axle 385/65 R 22.5 h.l. 10 mm & h.r. 10 mm * We renew "TÜV" before selling * All information without guarantee * Further information and criteria on additional services / Additional service * Repainting, retrofitting possible * Short-term license plate / Customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, made of galvanized steel up to the support structure (semitrailer construction, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BWI) readable in the central control unit (CCU) (display), 1st axle with starting aid (new EC regulation, without CCU option). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5, offset 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Nodpfxsz S St No Ab Asdc Mechanical landing gear with two speeds, 2x 20 tons support load with pivoting foot. Braking System: According to EC standards, EBS E system Wabco with RSS (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lights, Aspöck Europoint 3 type, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-shaped protection. Body/Container: Body completely welded on the inside, reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum container, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt. Plank profiles completely welded on the inside. Floor as a sliding floor system laid on 140 mm ALU cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special ALU corner profiles in a beveled design. Smooth rear wall in a straight design with 2 ALU wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in a welded ALU rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving discharge wall with Kevlar cover, approx. 1,800 mm long, plus side Kevlar seal. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders, plus anti-lifting glide bearings, type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed stops on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed stops. Line size NW 21. Fixed stops with a size and design to be specified. Operating pressure 190-max. 240 bar. ALU end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, waterproof box. Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU wheel chock, side ALU impact protection in a folding design, 1 toolbox approx. 860x460x400 mm in p

Condition: used, first registration: 10/2011, REISCH 82 m³ Walking Floor Sliding Floor Semi-Trailer with Grain Hopper FLOOR: VERY GOOD CONDITION! ● Body: Full aluminum ● Frame: Steel ● 82 m³ volume ● 3 x BPW-ECO Plus axles ● Air suspension ● Lift axle ● Lifting/lowering system ● Disc brakes ● Platform ● Grain hopper and slide gate at the rear ● Roller shutter ● Aluminum sliding wall ● Hydraulic locking ● WABCO - Smartboard ● ABS ● ALCOA - Rims Nedpfjyutyrox Ab Ajdc ● Tires: 385/65 R 22.5 ● GVWR: 35,000 kg ● Tare weight: 7,700 kg! ● Overall length: 14,050 mm ● Internal dimensions (including grain hopper): 12,600 x 2,470 x 2,510 mm - German semi-trailer! - 1st hand! - TÜV/MOT: new! Errors and prior sale excepted! = Further information = Year of construction: 2011 Payload: 1 kg Please contact Joannis Arpantzanis or Kai Bühler for more information.

Condition: used, axle configuration: 3 axles, first registration: 06/2012, Equipment: ABS, Lift axle Ndedpfx Aordtihjb Ajc