Used Gsw Ahm 3000 for sale (5,451)

Condition: good (used), functionality: fully functional, Year of construction: 1996, coil outer diameter: 1,700 mm, coil width: 600 mm, rotational speed (min.): 17 rpm, overall weight: 750 kg, total length: 1,900 mm, total width: 1,600 mm, total height: 2,000 mm, - Hydraulic pump output: 0.75 kW Dsdpfx Alsy R Sv Ej Aewc - Motor power: 2.2 kW

Condition: used, Year of construction: 1980, functionality: fully functional, Kohler straightening machine 30-400 - built in 1980 Number of straightening rollers 9 Max. belt width 400 mm GSW decoiler AHM 1500 - built in 1999 Mounted together on a base frame Further data and pictures on request Dwsdpfx Alev Hrlto Ajc

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Dwjdpjzyc Riofx Al Ajc The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Dwjdpfez Hvl Rox Al Ajc Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility Dedpfxoy Rvfqj Al Aowc In current daily use Ready for removal Sealing bar is 250mm wide See video attached Price € 7,500 We can organise shipping / delivery for you.

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Djdpfxszi Upcj Al Aswc Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Dwodpfx Aleyz Dilj Aoc Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Load capacity: 150 kg Band width: max. 150 mm Coil diameter: max. 800 mm Spreading range: 230 ... 545 mm Design: • Motorized drive • Loop control via contact switch on the reel base • Limit stop disc at the rear Dwodpfezi Exuox Al Ajc • Limit stop ring at the front • Selector switch for left/right rotation • Selector switch for manual/automatic operation

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Container rotating device, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed continuously adjustable, 80 to 1600 mm/min. Diameter 40mm to 1400mm Roller diameter 200mm Dwedpfx Ajgu Edyjl Aec L: 800 x W: 370 x H: 450 Model or color variations possible.

Condition: excellent (used), WEBO – an industrial multi-spindle drilling machine with four independent heads. This machine is designed for serial drilling of multiple holes simultaneously, which significantly increases production efficiency. Each head has its own drive and adjustable height and rotational speed. Technical specifications: * Manufacturer: WEBO * Number of heads: 4 * Number of spindles: 4 Dwodpfx Aszkmfxel Asc * Motors: 4 × Siemens * Power of one motor: 0.75 kW * Power supply: 220/380 V * Spindle speed: 200–3000 rpm * Speed adjustment by changing the belt position * Stable, heavy cast iron construction * Condition: used, functional

Condition: good (used), Year of construction: 2012, operating hours: 21,000 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 715 mm, total height: 3,200 mm, total length: 8,800 mm, total width: 3,800 mm, table width: 700 mm, table length: 3,600 mm, overall weight: 12,600 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,645 h, spindle nose: HSK63, Technical data of the CHIRON MILL 3000 Specification / Axis Technical data (Standard / 5-Axis) + indexing table Travel X 3,000 mm Travel Y 610 mm Travel Z 715 mm Drive & Rapid Traverse up to 75 m/min in X / Y / Z (AC servo motors) Milling spindle speed 12,000 min⁻¹ Tool interface HSK-A63 Tool changer (pick-up) 170 positions Dedez Imxdopfx Al Aewc Max. tool weight 8.0 kg Max. tool diameter 75 mm (160 mm with free neighboring positions) Max. tool length 370 mm

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,508 h, Year of construction: 2018, machine/vehicle number: S0721Q0022, laser power: 500 W, overall weight: 4,300 kg, construction height: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Build volume: Ø 300 × H 400 mm Build rate: 5–60 cm³/h Layer thickness: 20–150 µm Laser power: 500 W Beam diameter: 100–500 µm O₂ concentration: 100 ppm Exposure speed in the powder bed: 3 m/s Preheating of the substrate plate: 200 °C Dedpfx Alez Irhks Ajwc MACHINE DETAILS Voltage: 400 V Current: 32 A Frequency: 50/60 Hz Dimensions & Weight Dimensions incl. filter system: 3,385 × 1,435 × 2,225 mm Weight incl. filter system: 4,300 kg Laser operating hours “Laser Beam on”: 17,508 h (as of 11.04.2023) EQUIPMENT Filter system Zirox sensor Single laser Powder Bed Monitoring Condition Monitoring Performance Monitoring Protective gas operation with nitrogen or argon 4 dosing containers 1 build cylinder 1 overflow container Various spare parts, including protective glass Manuals All axes professionally secured for transport The following materials can be processed: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum-, nickel-based, cobalt-chromium, copper, titanium and precious metal alloys. Last processed material: AlSi10Mg

Condition: good (used), Year of construction: 1981, machine/vehicle number: 2627, Offer 26236 Technical Data: - max. working width 3040 mm - max. material thickness ST 37 4 mm - swiveling upper beam - bending angle adjustment, electronically pre-selectable 0 - 135° - max. lifting height of the upper beam 350 mm - lifting height of the upper beam, electronically pre-selectable - adjustability: - of the bending beam 125 mm - of the lower beam 125 mm - upper beam drive 400 V / 4.0 kW - bending beam drive 400 V / 5.5 kW Djdoz Nypgopfx Al Ajwc - space requirement approx. W 3950 x H 1600 x D 1200 mm - weight approx. 4800 kg - includes: - foot pedal - bending rails - backstop

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: Dwsdpfx Aez Iww Rjl Ajc • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: good (used), Year of construction: 1988, machine/vehicle number: 47800, Offer 26308 Technical specifications: - Maximum working width: 3040 mm - Maximum material thickness at 40 kp/mm² tensile strength: 2 mm - Electronic adjustment of bending angle: 0 - 180° - Automatic sequential control for a complete working process - Maximum upper die setting: 250 mm - Maximum opening width/stroke of the upper die: 350 mm - Height adjustment: - Upper die: 30 mm - Lower die: 90 mm - Upper die drive: 400 V / 1.5 kW - Lower die drive: 400 V / 4.0 kW - Space requirement: approx. W 4450 x H 1650 x D 2100 mm - Weight: approx. 3900 kg - Includes: Dwsdpfxoz Ndu So Al Asc - Point rail + lower die rail - E-foot switch

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Djdpfx Aez Ixzkel Aewc

Condition: used, Year of construction: 2022, functionality: fully functional, A GEA decanter CF 3000, year of manufacture 2022, is available for sale at our location in 55569 Monzingen. The decanter is used and has minor signs of wear. Currently, the decanter is still connected to the power supply and can be inspected by appointment. Dwsdoz I S R Sopfx Al Aec If you are interested, we will gladly send you a data sheet with detailed information about the system upon request. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: used, Year of construction: 1983, functionality: limited functionality, machine/vehicle number: AWF 310 0891, The machine is in operation and can be inspected after prior arrangement. Delivery in November 2026. No delivery service is provided; dismantling and transport are the responsibility of the buyer. A crane with a lifting capacity of 2 x 5 tons is available for loading. The sale is made without warranty or guarantee, and only to commercial customers, plus VAT; no liability for defects. Maximum distance between centers: 3000 mm. By incorporating an additional table, the maximum grinding length can be extended to 6000 mm by rotating the workpiece. Distance between centers: 260 mm. All information is provided without guarantee. Dwedez I T I Espfx Al Ajc The sale includes the coolant system.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,000 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, rotational speed (max.): 5,000 rpm, workpiece weight (max.): 6,000 kg, ANAYAK VH 3000 Plus bed milling machine for sale. Dedpfx Aljz Ig Npe Aowc The machine is fully functional and can be inspected while in operation. Functional videos are also available upon request. It was mainly used for machining aluminum and plastic (tool and fixture construction). Very smooth operation and excellent dimensional accuracy! - Year of manufacture: 2005 - Spindle hours: 42,000 - Manufacturer: Anayak - Model: VH 3000 Plus - X-axis: 3000 mm - Y-axis: 1700 mm - Z-axis: 1500 mm - Max. spindle speed: 5000 rpm - Table length: 3200 mm - Table width: 1100 mm - Table load: 6000 kg - Spindle taper: ISO 50 - Spindle motor power: 22 kW Disassembly and loading can be arranged for an additional charge. Please do not hesitate to contact us if you have any questions.

Condition: used, Year of construction: 1996, Straightening machine manufactured by GSW, type RMZ 50/54. Press force approximately --- tons. Year of manufacture 1996. Concise summary provided – a full technical translation will be provided if required for this lot. Dedpfx Alozypt Dj Aowc

Condition: used, Year of construction: 2012, functionality: fully functional, control type: PLC-controlled, actuation type: electric, bar diameter (min.): 6 mm, bar diameter (max.): 50 mm, power: 2 kW (2.72 HP), input voltage: 400 V, Bar feeding system by Irco Breuning Simag 50.1R 3000 bar lengths up to 3000 mm maximum capacity 50 mm guide rods of 15, 22, 30, 45 mm various collets Dedozz Hubepfx Al Ajwc

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Brand: PFG Machine Tools Model: CL Vumaz X 3000 Machine Type: 5-axis moving column machining center Year of Construction: 2010 CNC Control: HEIDENHAIN iTNC-530 Axis Travels X-axis travel: 3,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm A-axis travel – Tilting head: +95° / -95° C-axis travel – Rotary table: 360° Work area for pendulum machining with vertical spindle: 2 zones of 1,300 × 1,000 mm Rapid traverse rates for X / Y / Z axes: 30,000 mm/min Main Table Table dimensions: 3,200 × 1,060 mm Maximum table load: 2,500 kg/m² Diameter of rotary table: Ø 800 mm Maximum rotary table load: 2,500 kg C-axis with 360° rotation Spindle Spindle taper: HSK-A63 Maximum spindle speed: 18,000 rpm Spindle motor power: 25 / 38 kW Spindle motor torque: 116 / 200 Nm Automatic Tool Changer Magazine capacity: 32 tools Maximum tool diameter with occupied positions: Ø 80 mm Maximum tool diameter with empty positions: Ø 130 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool selection: fixed position Dimensions and Weight Approximate machine dimensions: 5,800 × 3,800 × H 3,500 mm Net machine weight: 24,000 kg Power consumption: 40 kVA Measuring Systems Measuring scales on X / Y / Z axes Automatic tool presetter Renishaw Measuring and positioning system for linear axes Coolant and Chip Management Coolant collection tank Chip conveyor Washing pumps CTS pump for high-pressure coolant through the spindle Spindle line cooler Dedicated fume extractor Accessories Set of HSK-A63 tapers Various tools Renishaw tool presetter Dedicated fume extractor 2 magnetic tables Zero points Tank and chip conveyor Washing pumps High-pressure CTS system Spindle line cooler Scales on X / Y / Z axes Documentation Machine manuals Electrical diagrams CE Declaration of Conformity Main Features 5-axis moving column machining center HEIDENHAIN iTNC-530 CNC control Large X-axis travel of 3,000 mm Y and Z axis travels of 1,000 mm Tilting head with A-axis from +95° / -95° Rotary table Ø 800 mm C-axis rotation of 360° Possibility of pendulum machining on 2 zones of 1,300 × 1,000 mm High-speed spindle up to 18,000 rpm Spindle power 25 / 38 kW Maximum torque 116 / 200 Nm Dodoz Iaw Tspfx Al Aewc HSK-A63 tool holder Automatic tool changer with 32 tools Rapid traverse rates up to 30,000 mm/min Renishaw tool presetter Scales on X / Y / Z axes High-pressure CTS system through the spindle Spindle line conditioning Chip conveyor and washing system Dedicated fume extractor 2 magnetic tables with zero points Complete with a set of HSK-A63 tapers and various tools Complete with manuals, electrical diagrams and CE Declaration

Condition: used, Year of construction: 2005, This Meinert automatic destacking system, type AM 33 - 3000 /1300 Systems, will be auctioned online in our industrial auction / machinery auction for woodworking machines - edge banding machine - destacking system - vacuum press - veneer shear - membrane press. Dsdpfxoz Ndxaj Al Aowc You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe Okuma LB 3000 EX II-MY C 450 Control system: OSP-300LA Year of manufacture: 2018 Internal machine number: 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm Travel in X-axis: 260 mm Dwjdpfx Aloz D Tt Te Ajc Travel in Y-axis: 120 mm Travel in Z-axis: 510 mm Travel in C-axis: 360 mm Max. turning diameter: 340 mm Max. turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: - Chip conveyor - One-touch IGF - Touch setter - Main spindle Kitagawa B210 - Coolant system

Condition: used, Year of construction: 2018, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz Dsdpfjz H Ah Sex Al Ajwc delivery time: on request terms of payment: 100% prior to delivery