Used Goepel Axi - Pcb Aoi And X-Ray Unit Combined for sale (85,997)

Year of construction: 2016, condition: not inspected (used), Current hours on tube 3560 (20.000 total lifetime of the tube) PCB width max.: 450 mm x 400 mm Hodpfx Afju E Icve Seu Inline X ray + AOI Working condition to our best knowledge. Please note that machine will be sold without warranty and in as-is condition. We always recommend our customer to do a full OEM service prior to installation of the units to production to ensure the maximum efficiency of the machines!

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Hsdozl Scrjpfx Af Sou Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Hjdpfx Afjzhwvpo Sou Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: good (used), Year of construction: 2017, total height: 1,800 mm, total width: 1,100 mm, total length: 2,000 mm, overall weight: 1,000 kg, Equipment: documentation/manual, For Sale: Loma X-ray machine with Loma ejection unit Hedpfezv S Uijx Af Sou Brand: Loma Type: X5 & CV Year of manufacture: 2017 Maximum product width: 45 cm X-ray / radiography It is possible to view this machine on-site. If you have any questions or comments, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2015, The Heuft Reflexx – high speed empty bottle and label inspector. Model Reflexx HBBRTIXX Spectrum TX controller Capacity to 50.000 bph. YOM 2015 EXCELLENT CONDITION It’s more than just a quick check. The HEUFT system diligently inspecting empty glass bottles for any defects before they move on to be filled is comprehensive quality assurance that brings immense value to the entire bottling process. Hodpfxjytrdte Af Sju Here’s why these HEUFT inspection solutions are so critical: 1. Full Coverage, Zero Blind Spots: The system doesn’t just glance at the bottle; it performs an all-surface, all-angle inspection of the base, sidewalls, finish, and threads. This level of detail is vital for spotting tiny defects the human eye can easily miss. 2. Advanced Detection Technologies: Utilizing a powerful combination of high-resolution cameras, smart AI image processing, and in some models, patented pulsed X-ray technology. This includes: - Glass Defects: Cracks, chips, inclusions, and finish damage. - Foreign Objects: Everything from foil and cigarette butts to insects, residual liquid (like caustic lye or oil), and, most dangerously, glass splinters hidden in the bottle base. 3. Low False Reject Rate: Thanks to intelligent image analysis (like HEUFT reflexx A.I.), they can distinguish between a critical defect and a harmless cosmetic blemish, meaning you don’t waste good, perfectly usable bottles. HEUFT SPECTRUM TX Controlling centrally: one platform for all requirements. Precise, network-compatible and cross-system: the HEUFT SPECTRUM TX forms the basis for different technologies, modules and functions. The devices of the generation of the same name can be exactly adapted to individual requirements on site and retrofitted at any time due to this universal platform.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: P.0020001424, X-Ray Yxlon international MU231 - fully functional (2003) Fully automatic, 100% x-ray inspection of alloy wheels using YXLON's Y.AI/Rel.9 ADR program reaches a cycle time below 25 seconds per wheel. The automatic defect. Fully functional X-Ray for alu wheels. Possible alu wheels from size 12 to 19. Machine is fully working, perfect condition. Hedpfxex Hqnro Af Sou During 2025 full repas was done - all issues are now sorted (tested). Software is unlocked. New owner can test the machine before purchase (Central Bohemia). Machine label attached. Price: 49.000 EUR excl. VAT (price does not include transport and duties) Invoice will be issued in EUR from Czech company. When you will have any questions, do not hesitate to contact us - e-mail / WhatsApp / call Lead cabin (1) with shuttles (2) for the transport of wheels in/out the cabin Decollators to get single wheels for transportation in the cabin X-ray tube (3), Image Intensifier (4), High-voltage generator, X-ray control unit (5) Industrial PC (6) (with mechanical positions and X-ray parameters for every wheel type) Control cabinet with PLC (7) Wheel manipulator (8) (Rotation and linear movement of wheels) X-ray-manipulator (9) (tilt axis with X-ray tube and Image intensifier) Vision System for wheel type recognition Image-Processing Unit (Host PC with Slave PCs) Output conveyor (10) e.g. with an alterable switch (for accepted wheels / rejects)

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Hjdpfxeyzpkzo Af Sou Built for the Modern SMT World The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Control System: Windows 10 64-bit X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Counting Speed: Fully automated, operator training not required.

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (software IMAWOP) Max useful working area (without edge banding process) mm 6100 x 2000 x 125 Max useful working area (edge banding process) mm 3100 x 1925 x 100 (panel thickness) No. 10 movable rails (supports) 6 x length mm 1400, + 4 x length mm 1450 LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pump, capacity 140 m3/h) Clamps for workpieces fixing Safety side metal grids and front emergency carpets Hodpfoz Dtudjx Af Sou Motorized carpet to evacuate chips and wastes Separate electric and command cabinet No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) Banding group on board - (Y AXIS) Glueing Unit (P.U.R. Glue + Quick Melt unit) VT 100/100 with NORDSON premelter Edge coils supporting unit (No. 2 reels) OPTIONALS: N° 1 Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles N° 1 Circular saw (diam. mm 200) N° 1 Combined unit: Corner rounding / Edge scraping (with glue scraping extension)

Condition: like new (used), operating hours: 50 h, Open tube 160kV HR – High Resolution – W Target (4W) & Standard W target (10W) 1308 HR FP Detector (13x08cm) High & Medium Quality and Realtime modes Detector Tilt ± 60° 24” Ultrasharp monitor BGA & Area Void analysis Hedpfxjymmaps Af Seu Traceability package X-ray ‘ON’ hours ~45 hour Win10 PC Available for transport!

Condition: excellent (used), Year of construction: 2022, operating hours: 54 h, functionality: fully functional, machine/vehicle number: 3W2I324202513, Equipment: charge status display, lighting, ALIEN-X The latest C-arm version introduced to the market in January 2019 (our unit manufactured in 2022). The system is designed to have a working performance similar to an angiography unit or a stationary hemodynamics unit; therefore, it will not be affected by the high temperature of the X-ray unit or other components. The C-arm movement is both motorized and manual. Isocentric active anti-collision system geometry on the FPD and X-ray side. Compact and stable with a perfectly balanced C-arm, which is safe for all movements. Excellent maneuverability thanks to two large anti-static steering wheels. Latest generation start & stop system with excellent ergonomics and easily recognizable (color-coded) steering wheels. Durable cable connections between the C-arm and the trolley, resistant to mechanical damage, special paint for quick cleaning and disinfection. Generator power: 25kW Detector: 3030 X-ray tube: dual focus 0.3-0.5 mm Anode speed: standard and high speed available Control console: no. 2 synchronized ETS15-18 (on the C-arm and on the trolley) ETS15-18: real-time images and reference images displayed C-arm movements: manual – motorized – hybrid Hjdpfxsz Dft Ee Af Sou C-arm position storage: no. 4 arbitrary positions Anti-collision systems: active systems on both the FPD and X-ray tube side Adjustable monitor: 4K Small-sized trolley: separate from the C-arm Foot pedal New EPB power supply systems X-ray tube Alien X uses the latest generation of X-ray tubes with a titanium, zirconium, and molybdenum (TZM) plate. The advantages compared to using pure molybdenum plates are: better resistance to deformation, higher recrystallization temperature, and higher thermal resistance. Anode capacity 400 kHU 104 kHU/min anode dissipation High anode rotation speed Dual focus 0.3-0.5 mm 1200 W dissipation in the housing WAD + EHC WAD (Water Aided Dissipation): X-ray tube cooling system; through the combination of dielectric oil management within the radiology complex, coolant, and an advanced heat exchanger, there are no fans in the sterile field. EHC (Eurocolumbus Heat Control): real-time control of the heat generated with immediate actions to change frames/s and/or pulses and/or imaging and radiological parameters to ensure optimal system operation and avoid overheating. Manual with motorized drive – HYBRID The Alien X C-arm movement can be done both manually and with a motor; manual movement is easy, and the system can be operated simply and ergonomically thanks to dedicated handles. Hybrid movement allows the combined use of both movements. Motorized horizontal movement is also available as an option. This option is mandatory if the EIC package is required. EPD anti-collision system However, it should not be overlooked that a flat detector must have certain important features, regardless of the technology used, namely: 16-bit DQE ≥ 75% MTF ≥ up to 55%

Condition: good (used), Bizerba X Ray Machine With reject facility Fully stainless steel Tests carried out using certified test pieces, non-ferrous, stainless steel, ferrous metals The unit comes with an option of a Gamma Monitor, Red Eye G20-10 Hsdpfxeyivgqo Af Sju In every day use

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imagePROGRAF GP-4000” large-format printer Item for sale: 1 x Canon imagePROGRAF GP-4000 with the following specifications: incl. roll unit incl. roll holder set incl. WT36-600 Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Hodpfx Ajz Et T Nof Ssu Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Year of construction: 2021, condition: excellent (used), Scanner Finnos X-ray Manufacturer: Finnos Year of purchase - 2021 3D, laser and X-ray technology Including Jack-Steel measuring conveyor (2021) Hodjxmk I Ajpfx Af Sou EROP ergonomic solution for sorters(sorting chair etc.) was in operation for less than 2 years

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Hodpfxew Uc T Is Af Sju Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Hjdez Hckmepfx Af Seu Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Hodjzhw S Rspfx Af Seu

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Hjdpsz Eft Isfx Af Sju Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 800 kg, Equipment: compressor, cooling unit, Güntner - Basetec GFW 090.1/3 Dry Cooler / Condenser (64 kW) – air/glycol type - Type: GFW 090.1/3-S(S) - Cooling capacity: 64 kW - Number of fans: 3 Hsdpfjz Aau Rox Af Seu - Unit dimensions: 460 x 120 x 185 cm - Capacity: 54 L - Weight: 600 kg - Stock: 2 units (manufactured in 2016 and 2017) Dismantled by a professional refrigeration company. The unit does not contain glycol. The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: used, 6-axis robot servo controller, drive, motion control, servo pack, servo unit Servo unit for YASNAC XRC UP6 YASKAWA / MOTOMAN type CACR-UP6AAC Hodpfx Afewywi Ae Ssu O/N RA8616-0Y4A-46 S/N: D000Z2676590046 Version: 6-axis module for robot - Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6 - USB interface - Power supply type JUSP-RCP01AAC Dimensions (W x H x D): 270 x 310 x 200 mm Weight: 8.5 kg Used, in very good condition

Condition: excellent (used), Year of construction: 2000, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, Chiron FZ08W Magnum vertical machining center Hedpfxozznm Eo Af Sou Sinumerik 840D control Max spindle speed: 15,000 rpm X = 300 mm Y = 250 mm Z = 250 mm 2 x 4th axis Peiseler RT 100 Tool holder: HSK 32 ATC: 12 positions The machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I am offering a 3-month start-up warranty.

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) Hjdpfx Asw A Ruqof Sju OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Condition: used, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO, type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical travel via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw drive Hjdpfxogf Ix Aj Af Ssu Guide type: ball bearing guide, size 20 Payload: 60 kg Maximum speed of ball screw spindle: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Current consumption: max. 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide slide - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition A virtually identical linear unit is available under storage number 59702.

Condition: used, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper Hjdpfx Afsgi E Hae Sju REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Identification No. 247238 0001 Year of manufacture: 2000 Axis travel: 2400 mm Slide length: approx. 500 mm Overall length: 3520 mm - pneumatic feed clamp (clamping device with 2 Festo pneumatic cylinders) - standard linear guide 65 x 25 mm - base profile made of steel - ball screw Ø 32 x 10 mm - pneumatic, with position indicator - permanent magnet servomotor Type: MKD071B-061-KP1-KN (Part No: 261989, Serial No. MKD071-50234, brake with 24 Volt DC) Overall dimensions L x W x H: 3520 x 400 x 580 mm Weight: 340 kg good condition possible drive controllers under stock number 53628 and stock number 53673

Condition: used, Linear unit, linear axis, gantry axis with magnetic drive, linear guide for magnetic linear motor, electric slide Manufacturer: GEIGER Handling GmbH & Co. KG Hedpszinxqofx Af Sou Type: Motion Liner 20.0 Serial No.: 228773 2207 02659 Year of manufacture: 2022 with 2x linear guide REXROTH N R160 520 431 PTS / FD274 / RO10 Length of the guide rail: 3790 mm Length of the base body - overall length: 3980 mm - Standard linear guide BOSCH REXROTH series R1605 - guide rail 15 mm - Base body profile made of steel 200 x 95 mm - Measuring system with metal tape RSF MS 40.x6 MK (measuring length 3440 mm) - Base body with permanent magnet bed for linear motor Overall dimensions L x W x H: 3790 x 200 x approx. 140 mm Weight: 162 kg (weighed) very good condition - like new, unused from stock

Condition: ready for operation (used), Year of construction: 2013, operating hours: 37,745 h, spindle speed (max.): 10,000 rpm, overall weight: 2,500 kg, total width: 1,263 mm, total height: 1,671 mm, bar diameter (max.): 20 mm, product length (max.): 2,291 mm, number of axes: 5, This 5-axis Hanwha XD20 COMBINED was manufactured in 2013. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. The machine operates at a rated voltage of 220–240 / 380–415 VAC and has a weight of 2,500 kg. If you are looking to get high-quality turning capabilities, consider the Hanwha XD20 COMBINED swiss type turning machine we have for sale. Contact us for further details. HANWHA XD20 2 Units Available • Rated Voltage: 3 Phases, 200/220 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Short Circuit Current Rating: 2.5 kA • Operation Air Pressure: 4–6 kg/cm² (3.9–5.9 bar) • Machining Hours (TEMPS USIN.): 37,745 h 24 m 26 s BAR FEEDER – IEMCA ELITE 220 R 32 LL not included, optional • Manufacturer: IEMCA • Model: Elite 220 R • Type: 32 LL • Year: 2014 • Air Pressure: 6 bar • Voltage: 200 V • Phases: 3 • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kA • Weight: 660 kg HANWHA XD20H • Rated Voltage: 3 Phases, 220–240 / 380–415 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Max Rotation Speed: 10,000 rpm • Axis Control: 5 Axis • Operation Air Pressure: 4–6 kg/cm² (3.9–5.9 bar) • Max Working Diameter: Ø20 mm • Dimensions (L × W × H): 2258 × 1304 × 1758 mm • Weight: 3300 kg • Machining Hours (TEMPS USIN.): 43,977 h 52 m 57 s BAR FEEDER – IEMCA ELITE 220 R 32 LL not included, optional • Manufacturer: IEMCA • Model: Elite 220 R • Type: 32 LL • Year: 2013 • Air Pressure: 6 bar • Voltage: 200 V • Phases: 3 • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kA • Weight: 630 kg Technical Specification Hodpfxjzcxago Af Sju Counter Spindle Yes Driven Tools Yes