Used Gmatick Gmbh Roll Rack For Foil for sale (75,932)

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) Gujdjff Huwepfx Amtjh The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 00073068, roll pitch: 62 mm, total width: 692 mm, total height: 800 mm, total length: 25,000 mm, conveying length: 25,000 mm, working width: 600 mm, frame height: 800 mm, track width: 600 mm, For sale is a professional, motor-driven roller conveyor manufactured by AMI Förder- und Lagertechnik, built in 2021. Technical specifications: • Overall length: 25,000 mm • Conveyor height: 800 mm • Conveyor width: 600 mm • Color: RAL 5010 Blue • Without side guides • Includes discharge section of 3,000 mm • With roller stop • Two-sided emergency stop pull cords Photoelectric sensor control: Gsdpfx Asz Rv S Hemtjuh • 1 photoelectric sensor at the end of the powered section (after 22,000 mm / beginning of discharge section) → stops the conveyor system when occupied • 1 photoelectric sensor at the end of the discharge section (mounted under the discharge section, facing upwards, fan-shaped beam) → starts the conveyor system when released (adjustable response time) Process: Boxes are placed along the entire powered section and transported to the pick-up position. The control system prevents the discharge section from becoming overcrowded and automatically restarts when a box is removed. Electrical equipment (complete scope of supply): • 1 motor drive controller • 1 control cabinet with main operating elements on the door • 1 Siemens PLC controller • 2 photoelectric sensors • 2 emergency stop pull cords Sales information: • Delivery and collection possible by arrangement The system was built in 2021 and features a complete, professional control system (Siemens PLC + photoelectric sensor control). Ideal for the transport of boxes/containers in logistics, production, or shipping.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Gedpfxozvaibe Amtouh Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR135-310-930 high-profile sheet metal. Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia

Condition: good (used), Roll Lam 120CS Roll Laminator Double-sided cold lamination, original base included, Guedpfoz R Ipdex Amtoh Lamination width: 1200 mm Manufactured by: Biedermann GmbH Roll laminator equipped with silicone-coated rollers. Technical specifications: Working width / rollers: 120 cm Working width / roll width 130 cm Dimensions (W x D x H): 170 x 68 x 125 cm Infeed table height: 92 cm Weight (with base): approx. 168 kg Maximum board thickness: up to 25 mm Roller diameter: approx. 112 mm (silicone-coated) Maximum speed: approx. 3.5 m/min Power supply: 230 V / 0.07 kW

Condition: used, Year of construction: 2019, functionality: fully functional, Removal/Feed Unit, Pallet Roller Conveyor/Roller Conveyor Manufacturer: Rack & Roll Condition: Used Year of Manufacture: 2019 Model: Gravity Segment Length: approx. 2395 mm Total Width: approx. 1145 mm Godpfx Amsydfugetsuh Roller/Conveyor Width: approx. 1055 mm Roller/Axle Spacing: approx. 100 mm and 150 mm Roller Diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel Up to 2 brake rollers per segment Stock quantity: 28 units Price per unit Internal Item Number: 2026012601 Features: Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection Address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with an individual quotation or advise you on planning or installation matters. Simply let us know your requirements and site conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will find solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order-picking racks or bins.

Condition: used, Year of construction: 2019, functionality: fully functional, Pick-up/discharge unit, pallet roller conveyor/roller conveyor Manufacturer: Rack & Roll Condition: Used Year of manufacture: 2019 Model: Gravity Segment length: approx. 2375 mm Overall width: approx. 1125 mm Roller/conveyor width: approx. 1035 mm Roller/axle spacing: approx. 100 mm and 150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: galvanized steel Up to 2 brake rollers per segment Stock: 20 units Price per unit Internal item number: 2026012602 Features: Gujdpfx Ameydfuysteh Condition: fully functional with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Due to the excellent manufacturing quality, your material will glide smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to prepare a customized offer for you or provide technical advice on planning and installation. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our outstanding network of specialists. We have already successfully completed projects for companies from various sectors, such as logistics, pharmaceuticals, trades, and the electronics industry. Together, we will find cost-effective and sustainable solutions to optimize your workflow and material handling. We can also offer you fully automated sorting systems or complementary components such as picking racks or containers.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use Gsdpfx Ajz D Dxgomtouh • High profile precision and repeatability Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price.

Condition: used, Year of construction: 2019, functionality: fully functional, Roller Conveyor / Gravity Conveyor / Pallet Roller Conveyor Manufacturer: Rack & Roll Condition: Used Year of manufacture: 2019 Model: Gravity Installation: Consisting of 260.46 meters The system consists of: 30 segments x approx. 2550 mm length 18 segments x approx. 2395 mm length 16 segments x approx. 1445 mm length Stock available: approx. 142.73 meters Total width: approx. 1125 mm Roller width/conveying width: approx. 1035 mm Roller/axle spacing: approx. 150 mm Roller diameter: 60 mm Frame: 85/35 mm 1 to 2 brake rollers per segment installed, 80 mm diameter and 25 segments x approx. 2795 mm length 6 segments x approx. 2400 mm length 28 segments x approx. 1195 mm length Stock available: 117.73 meters Total width: approx. 1145 mm Gjdsyc H Avspfx Amtjuh Roller width/conveying width: approx. 1055 mm Roller/axle spacing: approx. 125/150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel 1 to 2 brake rollers per segment installed, 80 mm diameter Price: per meter Internal item number: 2026012401 Features: Condition: Fully operational, with signs of wear Ideal for fast material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was operational up until dismantling. Thanks to the excellent manufacturing quality, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your expert partner for roller conveyors, belt conveyors, incline conveyors or telescopic conveyors for loading and unloading goods! We are happy to provide a customised quote or assist you with layout or installation inquiries. Just let us know your requirements and onsite conditions. Benefit from our many years of experience and extensive network of specialists. We have successfully implemented projects for companies across a broad range of industries, including logistics, pharmaceuticals, trades, and electronics. Let us work together to develop cost-effective and sustainable ways to optimise your processes and material flow. We can also offer fully automated sorting solutions and complementary components such as picking shelves or bins.

Condition: used, Year of construction: 2016, Inclined Conveyor Belt/Transport Belt/Belt Conveyor Manufacturer: RBS-Förderanlagen GmbH Year of Manufacture: 2016 Model/Type: Sliding Belt Conveyor Condition: Used Overall Length: 3,200 mm Overall Width incl. Motor: approx. 800 mm Conveyor Width: approx. 670 mm Belt Width: approx. 650 mm System consists of infeed belt approx. 890 mm Inclined belt with bend: approx. 2,200 mm (1,700 mm inclined belt, 500 mm frame bend) Gjdjxxm I Njpfx Amtjuh Frame: 165 mm high / 35 mm wide Material: Steel/Aluminum Includes 3 height-adjustable feet Includes drive station/motor 0.55 kW Includes emergency stop switch, single-button control Includes light barrier Internal article number: na2025111801 Features: Condition: Fully functional, with signs of use Ideal for rapid material conveyance Professionally dismantled and packaged Pickup address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until disassembly. Thanks to the excellent workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Customized Solutions for Your Intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a tailored quote or advise you on concept development or assembly questions. Simply let us know your requirements and site-specific conditions. Benefit from our many years of experience and excellent network of specialists. We have already successfully realized projects for companies across various industries such as logistics, pharmaceuticals, trades or the electronics sector. Together, we will develop solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order picking racks or containers.

Condition: ready for operation (used), Year of construction: 1996, The item of my auction is a 180-degree bend roller conveyor, BELT width 52 cm. Gedpfxsyvqhde Amtjuh

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. Guodpfszx Rz Hsx Amteh The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, roll diameter: 75 mm, total width: 1,000 mm, conveying length: 3,500 mm, Roller track 1000x3525mm roller line, transport track several pieces /ct1967 Manufacturer: BUDDE Fördertechnik Length: 3525 mm Width: 1000 mm Gjdpfx Asubahgomtjuh Height: 250 mm Roller: 990 mm Wheel center distance: 75 mm Can be sorted, several pieces for sale

Condition: good (used), Year of construction: 2019, Steel plate and chain belt conveyor Gsdpfezzx Ersx Amteuh Manufacturer: FMW Förderanlagen GmbH Year of manufacture: approx. 2019 Total length: approx. 45,000 mm Width: approx. 2000 mm For sale is a steel plate and chain belt conveyor with a total length of approximately 45 meters and a width of approximately 2 meters. Please refer to the drawing for detailed specifications. The conveyor is currently assembled and can be inspected upon request. Disassembly is not included in the price.

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a 180-degree roller conveyor with rollers 57 cm long and a conveyor width of 2 m. Guodpfx Ajyvftmjmtoh

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Godpfjy Nc H Eex Amtouh

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Gusdpfxjziaqfe Amtjh

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 4760025, MACHINE DESCRIPTION Special drive concept Multi-axis Profiroll CNC/AC control Two-slide design Graphical user interface Process visualization Data management Operator guidance Integrated workpiece handling The PRI 120 CNC/AC is a newly developed internal gear back-rolling machine for rolling back angles onto the tooth flanks of existing internal gears. The innovative machine concept is based on over 60 years of experience in the development and manufacture of thread, profile, and gear rolling machines in Bad Düben. The machine’s base frame is a ribbed, torsionally rigid machine bed made of cast iron, which minimizes vibrations. In particular, the use of state-of-the-art proportional valve technology in conjunction with the PROFIROLL CNC control enables optimal process control of the rolling process. The control system, in combination with the backlash-free roller guide system, guarantees the highest precision and repeatability in the positioning of the rolling slide and, thus, of the tool. The innovative handling system, in conjunction with the rolling process, allows for the shortest cycle times. TECHNICAL DATA / PARAMETERS Workpiece diameter min./max. (mm) = 60/120 Workpiece width, min./max. = 10/40 Tool mounting length (mm) = 50 Connection value (kW/A) = 16/63 Width (mm) = 3600 Depth (mm) = 3600 Height (mm) = 2680 Weight (kg) = 5700 Guodpfeznkz Sox Amtoh

Condition: used, functionality: fully functional, conveyor belt length: 3,070 mm, conveyor belt width: 400 mm, Equipment: type plate available, Belt conveyor / conveyor belt / band conveyor Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt, SFT/P50 Total length: approx. 3070 mm Total width including motor: approx. 570 mm Total width without motor: approx. 430 mm Conveyor width / belt width: approx. 400 mm Belt type: smooth Material: steel Frame height: approx. 50 mm Including motor: 0.25 kW Including frequency inverter: TFR 600 HG Including 2 adjustable feet Internal article number: 2026051502 Conveyor technology – reliable and ready for immediate use – The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: • Condition: fully functional, with typical signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and securely packaged for transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics Gujdpfoza Dz Djx Amtsh • Pharmaceutical industry • Craft industry • Electronics industry Together we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology as well as complementary systems such as picking shelves or container solutions.

Condition: used, functionality: fully functional, conveyor belt length: 2,560 mm, conveyor belt width: 500 mm, Equipment: type plate available, Belt conveyor/conveyor belt Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt Overall length: approx. 2560 mm Overall width including motor: approx. 660 mm Overall width without motor: approx. 540 mm Conveyor width/belt width: approx. 500 mm Belt type: smooth Material: Steel, aluminum Frame height: approx. 50 mm Including motor Including 2 feet Internal article number: 2026051503 Conveyor technology – reliable and ready for immediate use – The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: • Condition: fully functional, with typical signs of use • Ideal for efficient and fast material transport • Professionally dismantled and packaged for safe transport Pick-up address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high load. Tailor-made solutions for your internal logistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design, and implementation of individual solutions. Upon request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Gedpjza Ecpefx Amtouh Benefit from our many years of experience and our strong network of specialists. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Crafts • Electronics industry Together, we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology and complementary systems such as picking shelves or container solutions.

Condition: used, functionality: fully functional, conveyor belt length: 2,060 mm, conveyor belt width: 300 mm, Equipment: type plate available, Belt conveyor/conveyor belt/transport belt Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt Overall length: approx. 2060 mm Overall width including motor: approx. 530 mm Overall width without motor: approx. 320 mm Conveyor width/belt width: approx. 300 mm Material: Steel/aluminum Frame height: approx. 50 mm Including motor: 0.25 KW Including frequency inverter: 0.37 KW Including 2 adjustable feet Internal article number: 2026051501 Godpfeza Drijx Amtouh Conveyor technology – reliable and ready for immediate use - The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: • Condition: fully functional, with typical signs of wear • Ideal for efficient and rapid material transport • Professionally dismantled and packed for safe transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high load. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Craft trades • Electronics industry Together we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology as well as complementary systems such as picking racks or container solutions.

Condition: excellent (used), Price per unit. Guedpfx Amsz Sm U Aetjh For sale: a professional glue roller / glue applicator from Tünkers GmbH, designed for precise application of glue onto paper, cardboard, corrugated board, leather, fabrics, and other flat materials. This device is suitable for bookbinding shops, printing houses, production facilities, and anywhere where uniform glue distribution is required. The machine is equipped with a system of working rollers ensuring even glue application and adjustment of the amount of material dispensed. The robust, cast iron construction guarantees high durability and stable operation for many years. Technical specifications: Manufacturer: Tünkers GmbH Type: Glue roller / glue applicator Machine number: 12/30274/22 Electric drive Rotation direction switch (left / stop / right) Adjustment of the amount of glue applied Two dispensing rollers Metal glue tank Adjustable work table Robust cast iron construction Made in Germany This device is ideal for working with glues used in bookbinding and packaging production. The visual condition corresponds to the photos.

Year of construction: 2026, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone Guedpfx Aeff Agiomteh hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: used, Year of construction: 1990, Heavy-duty rollforming line Guedpfx Amoymzzuoteh 10 stations Width: 260 mm

Condition: used, Year of construction: 2016, functionality: fully functional, Conveyor line / roller conveyor system / material handling system, material handling equipment, approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Model: Conveyor line Condition: Used Year of manufacture: 2016 Gedpfx Amox Ala Ejteuh The system consists of: 1 x Inclined belt conveyor, approx. 3.2 meters long 2 x Pneumatic lifts 3 x 90° bends 2 x Folding elements / passage elements 1 x Control cabinet 25 pcs adjustable feet and the remaining conveyor belt / roller conveyor, approx. 34 meters Total length: approx. 50,000 mm Total width: 750 mm Conveyor width: approx. 680 mm Roller diameter: 50 mm Internal article number: 2025120101 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) The material handling equipment was in operation until disassembly. Thanks to the excellent workmanship of the material handling equipment, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the trades or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking racks or containers.

Condition: good (used), Conveyor belt for scraps from guillotine M-Fordersysteme Guedpoz N Sgqjfx Amtjh Production Germany Year of manufacture 2015. Working width 46 cm, conveyor length approx. 250 cm. Discharge of trimmings from under the machine directly to the container. Material pressing roller, upper cover preventing spillage of the excavated material.