Used Gildemeister Gs 20-6 Con Pietro Cucchi for sale (73,981)

Condition: used, Integral automatic loader Pietro Cucchi Pick-up Fgedpfey Exgtox Ah Noc Pick-up recovery slide Hydraulic unit for pick-up

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe Fjdpfjin Ub Tex Ah Negc spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: reconditioned (used), functionality: fully functional, GILDEMEISTER GS20 LATHE VARIANT 25 MM ELECTRICALLY AND MECHANICALLY REFURBISHED -REFURBISHED PNEUMATIC SECONDARY CHUCK -NEW AIR TREATMENT UNIT AND SOLENOID VALVES -RADIAL AND AXIAL SLIDES IN POS. 1-2-4-5 -WORKPIECE PICK-UP AT POS. 6 MECHANICAL OVERHAUL: 1. TURNTABLE OVERHAUL 2. SLIDE OVERHAUL 3. FRONT AND LEVER OVERHAUL Fgjdpfew Sxptsx Ah Nec 4. SPINDLE OVERHAUL 5. COLLET OPENING/CLOSING SYSTEM OVERHAUL 6. THREAD CUTTING UNIT OVERHAUL ELECTRICAL OVERHAUL: 1. NEW SIEMENS S71200 PLC AND SIEMENS KTP700 PANEL 2. CAM ENCODERS 3. RELAY REPLACEMENT

Condition: used, Year of construction: 2007, turning diameter 325 mm turning length 600 mm control Siemens type 840D turning speeds 5000 U/min power capacity 25 kW total power requirement 35 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,5x2,5x2,1 m Tool speed: 4500 rpm X-axis rapid traverse: 60 m/min Z-axis rapid traverse: 45 m/min Machine with Siemens 840 D powerline with Shopturn - C and Y axes, driven tools - IRCO ILS-RBK bar loader - Coolant system with internal coolant supply - Paper belt filter - Partial hollow clamping device - Oil mist separator - Counter spindle - Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Fgodoyquwkjpfx Ah Nec We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2021, laser power: 20 W, Computer and software in German language, autofocus, fiber laser source : high, power itterbium, working range 160mm x 160mm, laser wavelength : 1064 nm, Z-axis motorized adjustable, cooling: air Fgodpfx Aheuaug Io Njc

Condition: used, mileage: 284,300 km, power: 309 kW (420.12 HP), first registration: 07/2020, fuel type: diesel, empty load weight: 15,200 kg, maximum load weight: 16,800 kg, overall weight: 32,000 kg, wheelbase: 5,100 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, trailer coupling, MAN TGS 35.420 8x2-6 BL M-Tec hooklift/tipper/bulk carrier combination unit First registration: 7/2020 Only 284,300 km with supporting documentation Euro 6 emission standard Long-distance cab Automatic transmission Retarder Air conditioning, auxiliary heater Navigation system Lane keeping assist, adaptive cruise control Trailer coupling Weight variant 35,000 kg 8x2-6 axle configuration Leaf/air suspension 2nd axle can be lifted 4th axle can be steered and lifted Wheelbase 5100 mm Tires 315/70R22.5, tread depth approximately 50% Unladen weight 15,200 kg Fedpox U Egfefx Ah Njgc Hooklift/tipper/bulk carrier combination unit M-Tec HLS 20 Year of manufacture 2020 For roll-off containers and bulk carriers Additional unit TSA pocket silo Lifting and tilting capacity max.: 20,000 kg Export/net price: 79,900 Euro All information is without guarantee, subject to change.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Fedjxpyinopfx Ah Nogc Vibrating Screen Technical Specifications Model: CVS-2060 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: ready for operation (used), Simens 6RA8025-6GS22-0AA0 SINAMICS DCM DC-Converter SN: Q6H22450101, used, good condition, 100% functional, scope of delivery as per photos Fgsdpfx Ahsxahzge Njc

Condition: excellent (used), mileage: 492,900 km, first registration: 05/2014, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: grey, driver cabin: sleeper cab, emission class: euro5, suspension: air, Year of construction: 2014, Equipment: crane, differential lock, Truck MAN TGS 26.320 First registration: 26.05.20 Odometer reading: 2,900 km Automatic transmission, 12 gears Emission class: 5 Loading crane: Palfinger PK18002 Year of manufacture: 2011 Hydraulically extendable, 4 times 3,850 kg at 4 meters 2,500 kg at 6 meters 1,000 kg at 12.5 meters Equipped with 5th and 6th function Remote control Container hooklift system: Palift 20T Distance hook to rollers (retracted): 3.9 meters Distance hook to rollers (extended): 5.05 meters Payload: 13,010 kg Gross weight: 26,000 kg Brake lining first axle: 23 - 25 % Brake lining second axle: 24 - 24 % Brake lining third axle: 44 - 30 % Tyres first axle: % Tyres second axle: approx. 60 % Tyres third axle: % Automatic air conditioning On-board computer Central locking Cruise control Differential lock Electric windows and mirrors Air suspension front and rear Multifunction steering wheel Heated seats left + right .... Cevoman bvba. Lenskendijk 5 Fodpjzcn Nqsfx Ah Negc 2200 Herentals Belgium

Condition: used, mileage: 229,372 km, power: 235 kW (319.51 HP), first registration: 02/2015, fuel type: diesel, empty load weight: 14,655 kg, maximum load weight: 11,345 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, * German vehicle * 1st hand * Condition, see photos * HS Fahrzeugbau side loader * ASF side loader type SL-VK-CWS * HS Fahrzeugbau for ASF swap bodies * Driver's cab with 2 seats * Leaf air suspension + lifting and lowering * Liftable trailing steering axle * Central lubrication system * Retarder Fgsdjvhqptjpfx Ah Nsc * Bluetooth telephone * Differential lock * Cruise control * Automatic transmission * KIMAX onboard weighing system * Reversing camera * Air conditioning * Adjustable underride guard * Comfort driver's seat, air suspension * Heated seats * Roof hatch * Hands-free system * Traction control system (ASR) * PARKING BRAKE * ESP * Heated electric mirrors * Electric windows * Wheelbase: 4,200+1,350 mm * max. GVW: 26,000 kg * Unladen weight 14,655 kg * Payload 11,345 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 [mm] -Bar passage extension on request 25 [mm] - Cross carriages : 4 (pos.1-2-4-5) - Maximum feed length: 100 [mm] - Main spindle speeds : 400 - 4000 [rpm] with threading,400- 5000 [rpm] without threading - Travel time: 0.7 [s] - Cycle time: 1.4 - 60 [s] - Power: 11 [KW] ELECTRICAL PROVISION FOR Fedpfx Ahoq Nzl Ts Nsgc LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT consisting of theAC motors (protection type lP 54), main motor and feed with a PLC programmable Siemens S7-1500 DOCUMENTATION: CE certification with manuals Wiring diagrams I Hard copy + 1 Copy on USB with files in .pdf format EC Directive 2006142lCE - 2014130/EC 2O14I68IUE STANDARD

Condition: used, Year of construction: 2004, turning diameter max. 560 mm turning length 600 mm control 840D powerline Siemens greates pass round over bed 680 mm Swing dia. over traverse guideway 565 mm centre distance 620 mm turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 25 / 37 kW max. Torque 390 Nm spindle nose 170H5 spindle bearing diameter 120 mm usable bar diameter 65 mm max. chucking diameter 250 mm C-Axis 0,025° / 360 ° Spindle speed range subspindle 20 - 7.000 min/-1 power capacity - Sub spindle 25 / 33 kW max. Torque 213 Nm spindle bearing diameter 90 mm spindle bore 57 mm spindle nose 140H5 C-Axis 0,025° / 360 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tools max. 4.500 min -1 power capacity - driven tools 12,2 kW tool taper VDI 40 DIN 69880 Tool dimensions with square shank 40 mm x-axis 185 mm y-axis 80 mm z-axis 620 mm rapid traverse X: 60 m/min rapid traverse Y: 15 m/min rapid traverse Z: 45 m/min total power requirement 50 kVA weight of the machine ca. 7 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m CNC Turning- and MillingCenter GILDEMEISTER - CTX 420 linear V6 - Main and sub spindle - Tool drive - C axis / Y axis - Partial hollow clamping device - ShopTurn - Surface - Package bar processing consisting of: - Hollow clamping device 66mm - Workpiece picking device - Incl. 2x driven tools - Incl. 4x double tool holders - Incl. 4x tool holders Fgsdpfxewmf Tpj Ah Nec - Incl. 83x tools

Year of construction: 1971, condition: ready for operation (used), A rotary can seaming machine with double seaming function CCC is available. Stations: 6, can diameter range: 202mm-502mm, can height range: 100mm-700mm. An on-site inspection is possible. Fgedpfsy Ndd Sex Ah Njc

Year of construction: 1983, condition: ready for operation (used), A rotary can seaming machine with double-seaming function CCC, which was overhauled by Schmalbach Lubeca, is available. Throughput capacity: 360cans/min, can height range: 77mm-285mm, stations: 6. An on-site inspection is possible. Fedpsy Ndfcefx Ah Nsgc

Condition: used, Year of construction: 2004, operating hours: 9,203 h, functionality: fully functional, machine/vehicle number: 8040939522C, total height: 2,276 mm, total length: 6,205 mm, total width: 2,214 mm, overall weight: 12,000 kg, For sale is a high-quality CNC turning machine, type Gildemeister CTX 620 Linear, manufactured in 2004. The machine underwent a comprehensive overhaul and technical refurbishment in 2025, with various components being replaced. This overhaul, performed by DMG Used Machine, cost €60,000 alone. Here is a brief overview of the work carried out during the overhaul: - Retrofitting of a steady rest (SMW) (clamping range 90-350mm) - Replacement of the energy chain (Z-axis) - Replacement of all components in the energy chains X and Z (cables, hoses, fittings, etc.) - Repair of the tailstock Fsdey I U Ulepfx Ah Nsgc The machine has a 12-position tool turret VDI 50 (Duplomatic), 6 tool holders for driven tools, and a 400 mm chuck (KH400). Control system: Heidenhain. The machine is still occasionally used for production. Inspection is possible at any time, and the machine is connected to power. OTHER MACHINES ARE ALSO AVAILABLE FOR SALE; please inquire.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,395 h, travel distance X-axis: 380 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 2, This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information. Fgjdsx Stlqepfx Ah Nsc Siemens 840D with shopturnSpindle with integrated motorTailstockChip conveyorSpray gunAutomatic doorHollow clamping cylinder SMW 121 mmSMW Autoblok 400 BHD-FL ø 118 hollow Additional equipment • Tool holders (as shown in pictures) will follow • Tailstock will follow Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device Fgsdpex Sx Htjfx Ah Nsc • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1998, operating hours: 10,463 h, turning diameter over cross slide: 455 mm, turning length: 1,000 mm, turning diameter: 680 mm, spindle bore: 107 mm, travel distance Z-axis: 1,000 mm, Equipment: documentation/manual, Gildemeister CTX600E Heidenhain CNC Pilot 3190 control Between centers (TDC): 1000 mm Turning diameter over bed: Ø 680 mm Turning diameter over cross slide: Ø 455 mm X-axis travel: 320 mm Z-axis travel: 1097 mm Turret: 12 positions Driven tools: Yes Tool holder: VDI 50 C-axis: Yes Main spindle power: approx. 30 kW Spindle speed range: 4 – 2800 rpm Spindle bore: Ø 107 mm Max. chuck diameter: 500 mm X-axis feed force: 8 kN Z-axis feed force: 15 kN Rapid traverse X: 24 m/min Rapid traverse Z: 30 m/min Tailstock Quill diameter: 120 mm Quill stroke: 120 mm Fgjdpfxeyl Sa Sj Ah Nec Taper: MK5 (6) Quill force: 14 kN Dimensions & weight Weight: approx. 9,000 kg Length: 4300 mm Width without guard: 2000 mm Width with guard: 2450 mm Height: 2200 mm Note: The information on this page has been obtained and compiled to the best of our knowledge and belief, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The shown price is excluding VAT (VAT deductible for businesses).

Condition: ready for operation (used), Bosch SM 4.7/20-G16 Servo Control Module 1070917161, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Fodpfx Aei D Ud Ish Njgc

Condition: ready for operation (used), Bosch SM 4.7/20-G16 Servo Control Module 1070917161, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Fodoi D Ufaopfx Ah Njgc

Condition: ready for operation (used), Gildemeister VSNT 350 / zentro-elektrik 98008610 power supply 100020 48 - 63 Hz 230 V 1883, used, normal signs of wear, 100% fully functional, delivery scope as per photos. Fgjdpfx Ajx Erpueh Noc

Condition: ready for operation (used), Rexroth MAC071C-0-GS-3-C / 095-B-0 Permanent Magnet Motor MNR: R911252732 SN:7162420000052, used, normal signs of use, 100% functional, scope of delivery as per photos Fgsdpfxsi D Nfuj Ah Nec

Condition: ready for operation (used), Fanuc A06B-6050-H203 Velocity Control Unit, serial no. according to photo, used, professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery according to photos Fsdpfx Asi D Uwkjh Njgc

Condition: ready for operation (used), Bosch SM 4.7/20-G16 Servo Control Module 1070917161, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Fodpfoi D Ud Ssx Ah Njgc

Condition: ready for operation (used), Heidenhain / Gildemeister VAP4 AES 2 / IN9853603 control board SN:6135032 from Gildemeister CXT 600, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Fgedsx Erriepfx Ah Nec