Used Giben Prismatic 2 H100 Spt for sale (78,011)

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm Codpfx Aijzuyywslerh - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, functionality: fully functional, power: 14 kW (19.03 HP), cutting width (max.): 3,800 mm, Equipment: CE marking, Giben Prismatic 2 SP H.100, year 2000 for sale! Working width 3800 mm Number of grippers 6 Saw blade projection 100 mm Codpfxez H H U Ns Ailerh Installed power: 14 kW

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, Giben panel saw model Prismaic 2 SPT H 100 – Year 2002 Machine in excellent condition, fully operational and ready for use. Equipped with side rear loading. Cutting width: 4300 mm. ✔ Function tests performed ✔ Complete maintenance (pneumatic, mechanical, and electronic) Machine inspected and overhauled by a company specializing in service and maintenance. 📞 Contact us for more information or to schedule a demonstration. Crsdpfjy R D Rhex Ailjh

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Crodpfx Aiozn N Ikslsh

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, We offer this Giben KG.8250 slab bandsaw, ready for use, manufactured in 2001. Manufacturer: Giben Model: KG.8250 Year of manufacture: 2001 Condition: ready for use Identification category: 1426 Identification type: 844 Machine type: slab bandsaw Crodpfxjzaiwds Aileh If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Technical specifications: Max. planing width: 500 mm Max. planing height: 250 mm Cutterhead diameter: 110 mm Number of knives: 3 2 feed speeds Manual lifting Power supply: 380 V Motor power: 4 kW Cjdpszd Evvsfx Ailsrh Overall dimensions: Length: 1000 mm Width: 1100 mm Height: 1400 mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Crjdpfez A Ubiex Aileh Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Crodpstltvzofx Aileh Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Crjdpfx Aewcz Axjilsh

Year of construction: 2026, condition: new, Rotary tablet press SPT-TPL200 is the small rotary press for R&D and small scale production. According to GMP regulations; Touch screen, PLC control platform; HMI system; Description SPT-TPL 200 Number of station (max.) D=13 B=16 BB=19 1 Max.Tablet output tab/h 46 000 57 000 68 000 2 Max.Tablet dia. Round mm 25 16 13 Csdpody Dziefx Ailerh Shaped mm 25 19 14 3 Max. tablet Thickness mm 8,5 4 Max. main compression force Ton 5 5 Max. Pre compression force Ton 1 6 Machine Dimension mm 600 x 1106 x 1705

Condition: new, Year of construction: 2026, Automatical capsule filling machines SPT-FL25 Series (S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to 5 (optional #000,5). The machines are conform to GMP standards and CE certificat; SPT-Series guarantee the highest quality of production! The small capsule filling machine SPT-FL25 for R&D and small general scale production; According to GMP regulations; HMI system; Touch screen, PLC control system; 2 years warranty; Installation and service from Germany Number of capsule holder per segment - 3 psc/h; Max.production quantity of capsules - 25 000 psc/h (by 1 segment hole); 17 000 psc/h (by 2 segments hole), 8 500 psc/h (by 1 segment hole). Crsdpfx Aijdy Dyfsljh Weight of machine -700 kg; Space consumption - 900 x 1100 x 1700 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 14,669 h, Trumpf TruPunch 1000, 2019 X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 14,669 hours Machine - C-frame Cjdjzmgi Nopfx Ailsrh - Coordinate guidance - Linear magazine with 20 positions for clamping blocks and tools - Hydraulic clamping blocks (2 pieces + 1 option) - Drives with maintenance-free three-phase motors - Post-processing unit with programmable positioning device - 1st stop pin (inside right) - Transfer chute Punch head - Electro-hydraulic punch head - Rotatable mono-tool holder - Programmable positioning device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Control panel with 15" TFT color screen - Integrated technology data - Teleservice interface via internet - Automatic shut-down - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shut-down of drives Extended standard equipment - Brush tables - Chip conveyor + chip container - Additional clamping block - Sheet thickness detection - Vibration-damped installation - Programmable support table - Sensor for transfer chute - Wireless operation point Extended punching technology: Multitool Thread forming

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 5976/07, functionality: fully functional, power: 2.5 kW (3.40 HP), input voltage: 380 V, input frequency: 50 Hz, total width: 1,850 mm, total length: 2,500 mm, total height: 1,750 mm, overall weight: 420 kg, drill diameter: 130 mm, pressure: 6 bar, working height: 1,000 mm, Equipment: documentation/manual, RBB Trapano double-sided drilling machine, technically refurbished at our Belgium warehouse. Includes a set of used tools, see picture. Codpfx Aoxg Ngqjilerh

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: A0008858, Used Verderer VA25S-A01AS2SSSSPTPT Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations., serial number: A0008858; year of manufacture: 2012. Very good condition The specific arrangement code you provided (VA25S-A01AS2SSSSPTPT) designates a heavy-duty metallic pump constructed with a Stainless Steel fluid section, Stainless Steel seats, and PTFE (Teflon) balls and diaphragms, and defines a heavy-duty, highly corrosion-resistant configuration of the Verderair VA 25 Air-Operated Double Diaphragm (AODD) pump. This specific model is typically engineered to handle aggressive chemicals, strong acids, solvents, and high-temperature fluids The operating limits and physical profile for the Verderair VA 25 SS SS TF TF include the following parameters: Connection Size (Liquid):1" BSP or NPT (Threaded) Connection Size (Air): 1/2" NPT Maximum Flow Rate: 189 liters per minute (50 GPM) Maximum Discharge Pressure: 8.6 bar (125 PSI) Maximum Fluid Temperature: 104°C (220°F) Limited by the PTFE components Maximum Suction Lift (Dry): 3.0 to 4.9 meters Maximum Suction Lift (Wet): 6.0 to 8.8 meters Maximum Particle Size: 3.2 mm (Solids handling capacity) Pump Weight: approx. 16.5 to 18.8 kg (heavy due to full-metal construction) Certifications: ATEX certified (safe for explosive atmospheres) Dimensions: L 470 mm x W 250 mm x H 360 mm SS (Fluid Section): 316 Stainless Steel housing and manifolds. Provides high chemical resistance and mechanical durability; SS (Air Section / Check Valve Seats): Depending on the generation, this represents a heavy-duty Stainless Steel center air section or Stainless Steel valve seats. It avoids the corrosion or cracking risks associated with aluminum or plastic components in harsh environmental conditions; TF (Check Valve Balls): PTFE (Teflon) check balls. Ensures a tight seal and broad chemical compatibility during cycling; TF (Diaphragms): PTFE (Teflon) diaphragms (typically backed by an EPDM layer for flexibility). PTFE offers the highest level of universal resistance to corrosive fluids; Price 2.290 Euro + VAT, negotiable, FCA: Oradea/Romania Crsdpfsz Abcpox Ailsh Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Codpfjyymz Uox Ailsrh Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, Technical Specifications • Pipetting Range: 500 nL – 5 µL • Accuracy and Precision: Accuracy within 2-3% of target volume; coefficient of variation (CV) under 3% • Technology: True positive displacement using single-use disposable micropipettes with individual pistons (eliminates cross-contamination) • Plate Formats: SBS-format plates including 96-, 384-, and 1,536-well densities • Deck Options: Available in 2-plate or 5-plate position deck configurations • Throughput: About 2 minutes for a 96-well plate, 3 minutes for a 384-well copy, and 5 minutes for a 4x384-well stamp out Csdpfx Aoz Hfv Ejilsrh • Weight: 27 kg (59 lbs) for the 2-plate deck variant; 42 kg for the 5-plate deck variant • Dimensions: Approximately 390 mm x 470 mm x 690 mm • Power Requirements: Voltage 120 V / 220 V, Frequency 50 Hz / 60 Hz Key Applications • Serial dilutions and plate reformatting • Genomics workflows (NGS library prep, PCR/qPCR setup, normalization) • High-throughput screening and acoustic-ready plate preparation Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2003, functionality: fully functional, SOPREM Precision Coil Feeding Line (Decoiler + Straightener) — 2003. Complete matched feeding line for thin precision strip, ready to pair with a small high-speed stamping press. Decoiler — Type H1000.1000ZV. Max coil weight: 1000 kg. Coil Ø: 1000 mm outer / 375–520 mm inner. Reel speed: 2–20 rpm, 1.5 kW drive. Straightener — Type BR 19 . 160 . 12 . U . Strip capacity: up to 0.5 mm thick × 160 mm wide. Hydraulically driven precision straightening unit. Both units built 2003 · 400 V / 50 Hz · synchronized line with E-stop interlink to downstream press · Made in Switzerland. Technical Specifications Decoiler / Coil Reel (Haspel) H1000 / 1000ZV / 10M / LK.LF / N1 / G Cedpozav H Ssfx Ailerh Serial No. (nameplate): 110103 Max coil weight: 1000 kg Coil outer Ø: max 1000 mm Coil inner Ø: 375–520 mm Reel speed: 2–20 rpm Motor: KSMV 90L (4), 1.5 kW, 1400 rpm Gearbox: RMI 110 FL LCB, ratio i = 70 Slip clutch: set to 400 Nm Strip sensing: floor contact plate (loop control) Precision Band Straightener (Richtwerk) BR19.160.12.U Function: straightens coil curvature before the press Max strip thickness: 0.5 mm Max strip width: 160 mm Drive: hydraulically driven precision straightening unit Electrical Supply 400 VAC, 50 Hz, 3-phase + neutral + earth Rating: 25 A pre-fuse

Condition: good (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 380 mm, Equipment: documentation/manual, Number of clamps: 6 Cutting length: 3800 mm Max. saw blade overhang: 90 mm Air tables: 4x Features include “post-forming” for a single panel or a stack of laminated panels, a linear motor for moving the saw carriage without any friction or mechanical components, a speed exceeding 200 m/min, and an acceleration of almost “1g”, among many others. PRISMA EVO is a cutting center without a motor on the saw carriage (patented), and thanks to this extraordinary innovation, all causes of vibration are definitively eliminated, which improves the quality of the cut surface and ensures a longer blade life. Crjdpjy S Rhcsfx Ailsh PRISMA EVO uses linear guides with ball bearings for all sliding movements of the saw carriage, the pressure beam, and the side pressure device as standard. The feeder of this model is automatic, electronically controlled, and equipped with a brushless motor. The side aligner is “permanently engaged,” which guarantees a faster cross-cutting cycle for a single strip. The side aligner slides on a linear guide, ensuring smooth and clean movements, and is wear-resistant and virtually maintenance-free.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, KUKA KR150L110-2 robot, 2000 Number of axes: 6 Max. payload: 110 kg Max. reach: approx. 3100 mm Year of manufacture: 8/2009 Scope of supply: Robot, controller, cables, teach pendant Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Credpsz I R S Iofx Ailjh Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-works: Union table drilling machine Type BFT 90 / 2 Cedoz I Na Dspfx Ailsrh Year of manufacture 1975 / Overhauled and fitted with digital displays in 2022 Spindle 90 mm Mounting SK 40 with adapter MK 4 Table 1120 x 1000 mm Table load 2500 kg Distance spindle – stop 2400 mm Travel distances X/Y Z 1000 / 1250 / 1000 mm Spindle speeds 8 - 1600 rpm 2 digital displays Stop Spindle travel 710 mm Weight 9 tons For the price of Euro 8,500.—plus VAT ex-works.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Product Type: Storage / Process Tank Nominal Volume: 3,500 litres Total Volume: 4,082 litres Jacket Volume: 226 litres Empty Weight: approx. 1,760 kg Product-contacting Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: 1.4404 CE Marking: CE 0036 Permissible Pressure PS (Tank): -1 / +3 bar Permissible Pressure PS (Jacket): -1 / +6 bar Test Pressure PT (Tank): 5.6 bar Test Pressure PT (Jacket): 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Designed in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design review, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel has been fully inspected and released by the manufacturer. Tests carried out include: • Pressure test as per PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing check (as-built) • Review of material certificates • Calibration check of manometers • Verification of markings • Documentation review as per inspection checklist Full FAT and TÜV inspection reports available. EXECUTION • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-quality pharmaceutical design • Manhole with round pressure closure • CIP pipework • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty mounting blocks / trunnion design • Lifting lugs • Nameplate with complete PED marking DOCUMENTATION – complete and well-structured • EU declaration of conformity • TÜV certificate with inspection report (Module G) • TÜV design assessment and certification • 3.1 material certificates • Welder lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Manometer calibration reports • Surface and production reports • Parts list • Detailed drawings (body, lid, CIP, J-pipe, etc.) • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never put into operation • Was in storage • Interior surface as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR Crjdjylnwyopfx Ailjh • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production facilities • Process and waste management plants SPECIAL FEATURE Premium BRINOX pharmaceutical-grade manufacture with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking and documented FAT testing. Not a standard tank – certified project quality with comprehensive GMP-compliant documentation.

Condition: good (used), Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley, rail clamp Cedpjwq H Uijfx Ailorh -Rail clamp: 2 pieces -Type: Item no. 2 55528 Y8 2 55528 Y12 -Dimensions: see photos -Shipping/Price: complete -Dimensions: 115/120/H100 mm -Weight: 2.5 kg/piece

Condition: used, Year of construction: 2007, Heidelberg, station BUH 66-4, year of manufacture 2007. Optional: window frame pocket + sensor, light barrier, and ACC 2.4 control unit. Credpsz I Tzlefx Ailsh

Condition: like new (used), Year of construction: 2015, load capacity: 16 kg, arm reach: 3,100 mm, ROBOTERARM MANUFACTURER: KUKA MACHINE TYPE: KR30 L16-2 Crsdpfxsz I Inge Ailjh TECHNICAL SPECIFICATIONS CARRYING LOAD: 16 kg REACH: 3102MM YEAR OF CONSTRUCTION: 2015 CONTROLS: KRC4 Firmware: 8.3.21

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2277, turning length: 100 mm, spindle speed (max.): 6,000 rpm, total height: 1,750 mm, total length: 1,800 mm, total width: 1,000 mm, overall weight: 2,100 kg, bar passage: 25 mm, Equipment: documentation/manual, MÜGA GT 2-25 CNC lathe Codpfx Aisz I Ni Eoljrh - Number of NC axes: 2 - Maximum swing diameter: 360 mm - Rapid traverse rate: 17.5 m/min - Collet chuck: ISO DIN 163 E - Clamping range: max. 30 mm diameter - Tool holder, square: 16 x 16 mm, round: 20 mm - Spindle power: 5.5 kW - Tool positions: 7, external: 4, internal: 3 - Includes technical documentation and accessories such as a 3-jaw chuck, chuck jaws, and collets - Includes chip conveyor FCA D-97711 Maßbach – loaded onto a truck